xref: /openbmc/u-boot/drivers/usb/eth/lan7x.c (revision ee943655)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
4  */
5 
6 #include <dm.h>
7 #include <malloc.h>
8 #include <miiphy.h>
9 #include <memalign.h>
10 #include <usb.h>
11 #include <linux/ethtool.h>
12 #include <linux/mii.h>
13 #include "usb_ether.h"
14 #include "lan7x.h"
15 
16 /*
17  * Lan7x infrastructure commands
18  */
19 int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data)
20 {
21 	int len;
22 	ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
23 
24 	cpu_to_le32s(&data);
25 	tmpbuf[0] = data;
26 
27 	len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
28 			      USB_VENDOR_REQUEST_WRITE_REGISTER,
29 			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
30 			      0, index, tmpbuf, sizeof(data),
31 			      USB_CTRL_SET_TIMEOUT_MS);
32 	if (len != sizeof(data)) {
33 		debug("%s failed: index=%d, data=%d, len=%d",
34 		      __func__, index, data, len);
35 		return -EIO;
36 	}
37 	return 0;
38 }
39 
40 int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data)
41 {
42 	int len;
43 	ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
44 
45 	len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
46 			      USB_VENDOR_REQUEST_READ_REGISTER,
47 			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
48 			      0, index, tmpbuf, sizeof(*data),
49 			      USB_CTRL_GET_TIMEOUT_MS);
50 	*data = tmpbuf[0];
51 	if (len != sizeof(*data)) {
52 		debug("%s failed: index=%d, len=%d", __func__, index, len);
53 		return -EIO;
54 	}
55 
56 	le32_to_cpus(data);
57 	return 0;
58 }
59 
60 static int lan7x_phy_wait_not_busy(struct usb_device *udev)
61 {
62 	return lan7x_wait_for_bit(udev, __func__,
63 				  MII_ACC, MII_ACC_MII_BUSY,
64 				  false, 100, 0);
65 }
66 
67 int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx)
68 {
69 	u32 val, addr;
70 
71 	/* confirm MII not busy */
72 	if (lan7x_phy_wait_not_busy(udev)) {
73 		debug("MII is busy in %s\n", __func__);
74 		return -ETIMEDOUT;
75 	}
76 
77 	/* set the address, index & direction (read from PHY) */
78 	addr = (phy_id << 11) | (idx << 6) |
79 		MII_ACC_MII_READ | MII_ACC_MII_BUSY;
80 	lan7x_write_reg(udev, MII_ACC, addr);
81 
82 	if (lan7x_phy_wait_not_busy(udev)) {
83 		debug("Timed out reading MII reg %02X\n", idx);
84 		return -ETIMEDOUT;
85 	}
86 
87 	lan7x_read_reg(udev, MII_DATA, &val);
88 
89 	return val & 0xFFFF;
90 }
91 
92 void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx, int regval)
93 {
94 	u32 addr;
95 
96 	/* confirm MII not busy */
97 	if (lan7x_phy_wait_not_busy(udev)) {
98 		debug("MII is busy in %s\n", __func__);
99 		return;
100 	}
101 
102 	lan7x_write_reg(udev, MII_DATA, regval);
103 
104 	/* set the address, index & direction (write to PHY) */
105 	addr = (phy_id << 11) | (idx << 6) |
106 		MII_ACC_MII_WRITE | MII_ACC_MII_BUSY;
107 	lan7x_write_reg(udev, MII_ACC, addr);
108 
109 	if (lan7x_phy_wait_not_busy(udev))
110 		debug("Timed out writing MII reg %02X\n", idx);
111 }
112 
113 /*
114  * Lan7x phylib wrappers
115  */
116 static int lan7x_phylib_mdio_read(struct mii_dev *bus,
117 				  int addr, int devad, int reg)
118 {
119 	struct usb_device *udev = dev_get_parent_priv(bus->priv);
120 
121 	return lan7x_mdio_read(udev, addr, reg);
122 }
123 
124 static int lan7x_phylib_mdio_write(struct mii_dev *bus,
125 				   int addr, int devad, int reg, u16 val)
126 {
127 	struct usb_device *udev = dev_get_parent_priv(bus->priv);
128 
129 	lan7x_mdio_write(udev, addr, reg, (int)val);
130 
131 	return 0;
132 }
133 
134 /*
135  * Lan7x eeprom functions
136  */
137 static int lan7x_eeprom_confirm_not_busy(struct usb_device *udev)
138 {
139 	return lan7x_wait_for_bit(udev, __func__,
140 				  E2P_CMD, E2P_CMD_EPC_BUSY,
141 				  false, 100, 0);
142 }
143 
144 static int lan7x_wait_eeprom(struct usb_device *udev)
145 {
146 	return lan7x_wait_for_bit(udev, __func__,
147 				  E2P_CMD,
148 				  (E2P_CMD_EPC_BUSY | E2P_CMD_EPC_TIMEOUT),
149 				  false, 100, 0);
150 }
151 
152 static int lan7x_read_eeprom(struct usb_device *udev,
153 			     u32 offset, u32 length, u8 *data)
154 {
155 	u32 val;
156 	int i, ret;
157 
158 	ret = lan7x_eeprom_confirm_not_busy(udev);
159 	if (ret)
160 		return ret;
161 
162 	for (i = 0; i < length; i++) {
163 		val = E2P_CMD_EPC_BUSY | E2P_CMD_EPC_CMD_READ |
164 			(offset & E2P_CMD_EPC_ADDR_MASK);
165 		lan7x_write_reg(udev, E2P_CMD, val);
166 
167 		ret = lan7x_wait_eeprom(udev);
168 		if (ret)
169 			return ret;
170 
171 		lan7x_read_reg(udev, E2P_DATA, &val);
172 		data[i] = val & 0xFF;
173 		offset++;
174 	}
175 	return ret;
176 }
177 
178 /*
179  * Lan7x phylib functions
180  */
181 int lan7x_phylib_register(struct udevice *udev)
182 {
183 	struct usb_device *usbdev = dev_get_parent_priv(udev);
184 	struct lan7x_private *priv = dev_get_priv(udev);
185 	int ret;
186 
187 	priv->mdiobus = mdio_alloc();
188 	if (!priv->mdiobus) {
189 		printf("mdio_alloc failed\n");
190 		return -ENOMEM;
191 	}
192 	priv->mdiobus->read = lan7x_phylib_mdio_read;
193 	priv->mdiobus->write = lan7x_phylib_mdio_write;
194 	sprintf(priv->mdiobus->name,
195 		"lan7x_mdiobus-d%hu-p%hu", usbdev->devnum, usbdev->portnr);
196 	priv->mdiobus->priv = (void *)udev;
197 
198 	ret = mdio_register(priv->mdiobus);
199 	if (ret) {
200 		printf("mdio_register failed\n");
201 		free(priv->mdiobus);
202 		return -ENOMEM;
203 	}
204 
205 	return 0;
206 }
207 
208 int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev)
209 {
210 	struct lan7x_private *priv = dev_get_priv(udev);
211 
212 	priv->phydev = phy_connect(priv->mdiobus, dev->phy_id,
213 			     udev, PHY_INTERFACE_MODE_MII);
214 
215 	if (!priv->phydev) {
216 		printf("phy_connect failed\n");
217 		return -ENODEV;
218 	}
219 	return 0;
220 }
221 
222 int lan7x_eth_phylib_config_start(struct udevice *udev)
223 {
224 	struct lan7x_private *priv = dev_get_priv(udev);
225 	int ret;
226 
227 	/* configure supported modes */
228 	priv->phydev->supported = PHY_BASIC_FEATURES |
229 				  SUPPORTED_1000baseT_Full |
230 				  SUPPORTED_Pause |
231 				  SUPPORTED_Asym_Pause;
232 
233 	priv->phydev->advertising = ADVERTISED_10baseT_Half |
234 				    ADVERTISED_10baseT_Full |
235 				    ADVERTISED_100baseT_Half |
236 				    ADVERTISED_100baseT_Full |
237 				    ADVERTISED_1000baseT_Full |
238 				    ADVERTISED_Pause |
239 				    ADVERTISED_Asym_Pause |
240 				    ADVERTISED_Autoneg;
241 
242 	priv->phydev->autoneg = AUTONEG_ENABLE;
243 
244 	ret = genphy_config_aneg(priv->phydev);
245 	if (ret) {
246 		printf("genphy_config_aneg failed\n");
247 		return ret;
248 	}
249 	ret = phy_startup(priv->phydev);
250 	if (ret) {
251 		printf("phy_startup failed\n");
252 		return ret;
253 	}
254 
255 	debug("** %s() speed %i duplex %i adv %X supp %X\n", __func__,
256 	      priv->phydev->speed, priv->phydev->duplex,
257 	      priv->phydev->advertising, priv->phydev->supported);
258 
259 	return 0;
260 }
261 
262 int lan7x_update_flowcontrol(struct usb_device *udev,
263 			     struct ueth_data *dev,
264 			     uint32_t *flow, uint32_t *fct_flow)
265 {
266 	uint32_t lcladv, rmtadv;
267 	u8 cap = 0;
268 	struct lan7x_private *priv = dev_get_priv(udev->dev);
269 
270 	debug("** %s()\n", __func__);
271 	debug("** %s() priv->phydev->speed %i duplex %i\n", __func__,
272 	      priv->phydev->speed, priv->phydev->duplex);
273 
274 	if (priv->phydev->duplex == DUPLEX_FULL) {
275 		lcladv = lan7x_mdio_read(udev, dev->phy_id, MII_ADVERTISE);
276 		rmtadv = lan7x_mdio_read(udev, dev->phy_id, MII_LPA);
277 		cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
278 
279 		debug("TX Flow ");
280 		if (cap & FLOW_CTRL_TX) {
281 			*flow = (FLOW_CR_TX_FCEN | 0xFFFF);
282 			/* set fct_flow thresholds to 20% and 80% */
283 			*fct_flow = ((MAX_RX_FIFO_SIZE * 2) / (10 * 512))
284 					& 0x7FUL;
285 			*fct_flow <<= 8UL;
286 			*fct_flow |= ((MAX_RX_FIFO_SIZE * 8) / (10 * 512))
287 					& 0x7FUL;
288 			debug("EN ");
289 		} else {
290 			debug("DIS ");
291 		}
292 		debug("RX Flow ");
293 		if (cap & FLOW_CTRL_RX) {
294 			*flow |= FLOW_CR_RX_FCEN;
295 			debug("EN");
296 		} else {
297 			debug("DIS");
298 		}
299 	}
300 	debug("\n");
301 	return 0;
302 }
303 
304 int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev)
305 {
306 	int ret;
307 
308 	memset(enetaddr, 0, 6);
309 
310 	ret = lan7x_read_eeprom(udev, 0, 1, enetaddr);
311 
312 	if ((ret == 0) && (enetaddr[0] == EEPROM_INDICATOR)) {
313 		ret = lan7x_read_eeprom(udev,
314 					EEPROM_MAC_OFFSET, ETH_ALEN,
315 					enetaddr);
316 		if ((ret == 0) && is_valid_ethaddr(enetaddr)) {
317 			/* eeprom values are valid so use them */
318 			debug("MAC address read from EEPROM %pM\n",
319 			      enetaddr);
320 			return 0;
321 		}
322 	}
323 	debug("MAC address read from EEPROM invalid %pM\n", enetaddr);
324 
325 	memset(enetaddr, 0, 6);
326 	return -EINVAL;
327 }
328 
329 int lan7x_pmt_phy_reset(struct usb_device *udev,
330 			struct ueth_data *dev)
331 {
332 	int ret;
333 	u32 data;
334 
335 	ret = lan7x_read_reg(udev, PMT_CTL, &data);
336 	if (ret)
337 		return ret;
338 	ret = lan7x_write_reg(udev, PMT_CTL, data | PMT_CTL_PHY_RST);
339 	if (ret)
340 		return ret;
341 
342 	/* for LAN7x, we need to check PMT_CTL_READY asserted */
343 	ret = lan7x_wait_for_bit(udev, "PMT_CTL_PHY_RST",
344 				 PMT_CTL, PMT_CTL_PHY_RST,
345 				 false, 1000, 0); /* could take over 125mS */
346 	if (ret)
347 		return ret;
348 
349 	return lan7x_wait_for_bit(udev, "PMT_CTL_READY",
350 				 PMT_CTL, PMT_CTL_READY,
351 				 true, 1000, 0);
352 }
353 
354 int lan7x_basic_reset(struct usb_device *udev,
355 		      struct ueth_data *dev)
356 {
357 	int ret;
358 
359 	dev->phy_id = LAN7X_INTERNAL_PHY_ID; /* fixed phy id */
360 
361 	ret = lan7x_write_reg(udev, HW_CFG, HW_CFG_LRST);
362 	if (ret)
363 		return ret;
364 
365 	ret = lan7x_wait_for_bit(udev, "HW_CFG_LRST",
366 				 HW_CFG, HW_CFG_LRST,
367 				 false, 1000, 0);
368 	if (ret)
369 		return ret;
370 
371 	debug("USB devnum %d portnr %d\n", udev->devnum, udev->portnr);
372 
373 	return lan7x_pmt_phy_reset(udev, dev);
374 }
375 
376 void lan7x_eth_stop(struct udevice *dev)
377 {
378 	debug("** %s()\n", __func__);
379 }
380 
381 int lan7x_eth_send(struct udevice *dev, void *packet, int length)
382 {
383 	struct lan7x_private *priv = dev_get_priv(dev);
384 	struct ueth_data *ueth = &priv->ueth;
385 	int err;
386 	int actual_len;
387 	u32 tx_cmd_a;
388 	u32 tx_cmd_b;
389 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
390 				 PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b));
391 
392 	debug("** %s(), len %d, buf %#x\n", __func__, length,
393 	      (unsigned int)(ulong) msg);
394 	if (length > PKTSIZE)
395 		return -ENOSPC;
396 
397 	/* LAN7x disable all TX offload features for u-boot */
398 	tx_cmd_a = (u32) (length & TX_CMD_A_LEN_MASK) | TX_CMD_A_FCS;
399 	tx_cmd_b = 0;
400 	cpu_to_le32s(&tx_cmd_a);
401 	cpu_to_le32s(&tx_cmd_b);
402 
403 	/* prepend cmd_a and cmd_b */
404 	memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
405 	memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
406 	memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
407 	       length);
408 	err = usb_bulk_msg(ueth->pusb_dev,
409 			   usb_sndbulkpipe(ueth->pusb_dev, ueth->ep_out),
410 			   (void *)msg,
411 			   length + sizeof(tx_cmd_a) +
412 			   sizeof(tx_cmd_b),
413 			   &actual_len, USB_BULK_SEND_TIMEOUT_MS);
414 	debug("Tx: len = %u, actual = %u, err = %d\n",
415 	      (unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)),
416 	      (unsigned int)actual_len, err);
417 
418 	return err;
419 }
420 
421 int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp)
422 {
423 	struct lan7x_private *priv = dev_get_priv(dev);
424 	struct ueth_data *ueth = &priv->ueth;
425 	uint8_t *ptr;
426 	int ret, len;
427 	u32 packet_len = 0;
428 	u32 rx_cmd_a = 0;
429 
430 	len = usb_ether_get_rx_bytes(ueth, &ptr);
431 	debug("%s: first try, len=%d\n", __func__, len);
432 	if (!len) {
433 		if (!(flags & ETH_RECV_CHECK_DEVICE))
434 			return -EAGAIN;
435 		ret = usb_ether_receive(ueth, RX_URB_SIZE);
436 		if (ret == -EAGAIN)
437 			return ret;
438 
439 		len = usb_ether_get_rx_bytes(ueth, &ptr);
440 		debug("%s: second try, len=%d\n", __func__, len);
441 	}
442 
443 	/*
444 	 * 1st 4 bytes contain the length of the actual data plus error info.
445 	 * Extract data length.
446 	 */
447 	if (len < sizeof(packet_len)) {
448 		debug("Rx: incomplete packet length\n");
449 		goto err;
450 	}
451 	memcpy(&rx_cmd_a, ptr, sizeof(rx_cmd_a));
452 	le32_to_cpus(&rx_cmd_a);
453 	if (rx_cmd_a & RX_CMD_A_RXE) {
454 		debug("Rx: Error header=%#x", rx_cmd_a);
455 		goto err;
456 	}
457 	packet_len = (u16) (rx_cmd_a & RX_CMD_A_LEN_MASK);
458 
459 	if (packet_len > len - sizeof(packet_len)) {
460 		debug("Rx: too large packet: %d\n", packet_len);
461 		goto err;
462 	}
463 
464 	/*
465 	 * For LAN7x, the length in command A does not
466 	 * include command A, B, and C length.
467 	 * So use it as is.
468 	 */
469 
470 	*packetp = ptr + 10;
471 	return packet_len;
472 
473 err:
474 	usb_ether_advance_rxbuf(ueth, -1);
475 	return -EINVAL;
476 }
477 
478 int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
479 {
480 	struct lan7x_private *priv = dev_get_priv(dev);
481 
482 	packet_len = ALIGN(packet_len, 4);
483 	usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
484 
485 	return 0;
486 }
487 
488 int lan7x_eth_remove(struct udevice *dev)
489 {
490 	struct lan7x_private *priv = dev_get_priv(dev);
491 
492 	debug("** %s()\n", __func__);
493 	free(priv->phydev);
494 	mdio_unregister(priv->mdiobus);
495 	mdio_free(priv->mdiobus);
496 
497 	return 0;
498 }
499