xref: /openbmc/u-boot/drivers/usb/eth/asix.c (revision ad5b5801)
1 /*
2  * Copyright (c) 2011 The Chromium OS Authors.
3  *
4  * Patched for AX88772B by Antmicro Ltd <www.antmicro.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <dm.h>
11 #include <usb.h>
12 #include <malloc.h>
13 #include <memalign.h>
14 #include <linux/mii.h>
15 #include "usb_ether.h"
16 
17 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
18 
19 #define AX_CMD_SET_SW_MII		0x06
20 #define AX_CMD_READ_MII_REG		0x07
21 #define AX_CMD_WRITE_MII_REG		0x08
22 #define AX_CMD_SET_HW_MII		0x0a
23 #define AX_CMD_READ_EEPROM		0x0b
24 #define AX_CMD_READ_RX_CTL		0x0f
25 #define AX_CMD_WRITE_RX_CTL		0x10
26 #define AX_CMD_WRITE_IPG0		0x12
27 #define AX_CMD_READ_NODE_ID		0x13
28 #define AX_CMD_WRITE_NODE_ID	0x14
29 #define AX_CMD_READ_PHY_ID		0x19
30 #define AX_CMD_WRITE_MEDIUM_MODE	0x1b
31 #define AX_CMD_WRITE_GPIOS		0x1f
32 #define AX_CMD_SW_RESET			0x20
33 #define AX_CMD_SW_PHY_SELECT		0x22
34 
35 #define AX_SWRESET_CLEAR		0x00
36 #define AX_SWRESET_PRTE			0x04
37 #define AX_SWRESET_PRL			0x08
38 #define AX_SWRESET_IPRL			0x20
39 #define AX_SWRESET_IPPD			0x40
40 
41 #define AX88772_IPG0_DEFAULT		0x15
42 #define AX88772_IPG1_DEFAULT		0x0c
43 #define AX88772_IPG2_DEFAULT		0x12
44 
45 /* AX88772 & AX88178 Medium Mode Register */
46 #define AX_MEDIUM_PF		0x0080
47 #define AX_MEDIUM_JFE		0x0040
48 #define AX_MEDIUM_TFC		0x0020
49 #define AX_MEDIUM_RFC		0x0010
50 #define AX_MEDIUM_ENCK		0x0008
51 #define AX_MEDIUM_AC		0x0004
52 #define AX_MEDIUM_FD		0x0002
53 #define AX_MEDIUM_GM		0x0001
54 #define AX_MEDIUM_SM		0x1000
55 #define AX_MEDIUM_SBP		0x0800
56 #define AX_MEDIUM_PS		0x0200
57 #define AX_MEDIUM_RE		0x0100
58 
59 #define AX88178_MEDIUM_DEFAULT	\
60 	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
61 	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
62 	 AX_MEDIUM_RE)
63 
64 #define AX88772_MEDIUM_DEFAULT	\
65 	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
66 	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
67 	 AX_MEDIUM_AC | AX_MEDIUM_RE)
68 
69 /* AX88772 & AX88178 RX_CTL values */
70 #define AX_RX_CTL_RH2M		0x0200	/* 32-bit aligned RX IP header */
71 #define AX_RX_CTL_RH1M		0x0100	/* Enable RX header format type 1 */
72 #define AX_RX_CTL_SO		0x0080
73 #define AX_RX_CTL_AB		0x0008
74 #define AX_RX_HEADER_DEFAULT	(AX_RX_CTL_RH1M | AX_RX_CTL_RH2M)
75 
76 #define AX_DEFAULT_RX_CTL	\
77 	(AX_RX_CTL_SO | AX_RX_CTL_AB)
78 
79 /* GPIO 2 toggles */
80 #define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
81 #define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
82 #define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
83 
84 /* local defines */
85 #define ASIX_BASE_NAME "asx"
86 #define USB_CTRL_SET_TIMEOUT 5000
87 #define USB_CTRL_GET_TIMEOUT 5000
88 #define USB_BULK_SEND_TIMEOUT 5000
89 #define USB_BULK_RECV_TIMEOUT 5000
90 
91 #define AX_RX_URB_SIZE 2048
92 #define PHY_CONNECT_TIMEOUT 5000
93 
94 /* asix_flags defines */
95 #define FLAG_NONE			0
96 #define FLAG_TYPE_AX88172	(1U << 0)
97 #define FLAG_TYPE_AX88772	(1U << 1)
98 #define FLAG_TYPE_AX88772B	(1U << 2)
99 #define FLAG_EEPROM_MAC		(1U << 3) /* initial mac address in eeprom */
100 
101 #define ASIX_USB_VENDOR_ID	0x0b95
102 #define AX88772B_USB_PRODUCT_ID	0x772b
103 
104 /* driver private */
105 struct asix_private {
106 	int flags;
107 #ifdef CONFIG_DM_ETH
108 	struct ueth_data ueth;
109 #endif
110 };
111 
112 #ifndef CONFIG_DM_ETH
113 /* local vars */
114 static int curr_eth_dev; /* index for name of next device detected */
115 #endif
116 
117 /*
118  * Asix infrastructure commands
119  */
120 static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
121 			     u16 size, void *data)
122 {
123 	int len;
124 
125 	debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x "
126 		"size=%d\n", cmd, value, index, size);
127 
128 	len = usb_control_msg(
129 		dev->pusb_dev,
130 		usb_sndctrlpipe(dev->pusb_dev, 0),
131 		cmd,
132 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
133 		value,
134 		index,
135 		data,
136 		size,
137 		USB_CTRL_SET_TIMEOUT);
138 
139 	return len == size ? 0 : -1;
140 }
141 
142 static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
143 			    u16 size, void *data)
144 {
145 	int len;
146 
147 	debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
148 		cmd, value, index, size);
149 
150 	len = usb_control_msg(
151 		dev->pusb_dev,
152 		usb_rcvctrlpipe(dev->pusb_dev, 0),
153 		cmd,
154 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
155 		value,
156 		index,
157 		data,
158 		size,
159 		USB_CTRL_GET_TIMEOUT);
160 	return len == size ? 0 : -1;
161 }
162 
163 static inline int asix_set_sw_mii(struct ueth_data *dev)
164 {
165 	int ret;
166 
167 	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
168 	if (ret < 0)
169 		debug("Failed to enable software MII access\n");
170 	return ret;
171 }
172 
173 static inline int asix_set_hw_mii(struct ueth_data *dev)
174 {
175 	int ret;
176 
177 	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
178 	if (ret < 0)
179 		debug("Failed to enable hardware MII access\n");
180 	return ret;
181 }
182 
183 static int asix_mdio_read(struct ueth_data *dev, int phy_id, int loc)
184 {
185 	ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1);
186 
187 	asix_set_sw_mii(dev);
188 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, res);
189 	asix_set_hw_mii(dev);
190 
191 	debug("asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
192 			phy_id, loc, le16_to_cpu(*res));
193 
194 	return le16_to_cpu(*res);
195 }
196 
197 static void
198 asix_mdio_write(struct ueth_data *dev, int phy_id, int loc, int val)
199 {
200 	ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1);
201 	*res = cpu_to_le16(val);
202 
203 	debug("asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
204 			phy_id, loc, val);
205 	asix_set_sw_mii(dev);
206 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, res);
207 	asix_set_hw_mii(dev);
208 }
209 
210 /*
211  * Asix "high level" commands
212  */
213 static int asix_sw_reset(struct ueth_data *dev, u8 flags)
214 {
215 	int ret;
216 
217 	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
218 	if (ret < 0)
219 		debug("Failed to send software reset: %02x\n", ret);
220 	else
221 		udelay(150 * 1000);
222 
223 	return ret;
224 }
225 
226 static inline int asix_get_phy_addr(struct ueth_data *dev)
227 {
228 	ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 2);
229 
230 	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
231 
232 	debug("asix_get_phy_addr()\n");
233 
234 	if (ret < 0) {
235 		debug("Error reading PHYID register: %02x\n", ret);
236 		goto out;
237 	}
238 	debug("asix_get_phy_addr() returning 0x%02x%02x\n", buf[0], buf[1]);
239 	ret = buf[1];
240 
241 out:
242 	return ret;
243 }
244 
245 static int asix_write_medium_mode(struct ueth_data *dev, u16 mode)
246 {
247 	int ret;
248 
249 	debug("asix_write_medium_mode() - mode = 0x%04x\n", mode);
250 	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode,
251 			0, 0, NULL);
252 	if (ret < 0) {
253 		debug("Failed to write Medium Mode mode to 0x%04x: %02x\n",
254 			mode, ret);
255 	}
256 	return ret;
257 }
258 
259 static u16 asix_read_rx_ctl(struct ueth_data *dev)
260 {
261 	ALLOC_CACHE_ALIGN_BUFFER(__le16, v, 1);
262 
263 	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, v);
264 
265 	if (ret < 0)
266 		debug("Error reading RX_CTL register: %02x\n", ret);
267 	else
268 		ret = le16_to_cpu(*v);
269 	return ret;
270 }
271 
272 static int asix_write_rx_ctl(struct ueth_data *dev, u16 mode)
273 {
274 	int ret;
275 
276 	debug("asix_write_rx_ctl() - mode = 0x%04x\n", mode);
277 	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
278 	if (ret < 0) {
279 		debug("Failed to write RX_CTL mode to 0x%04x: %02x\n",
280 				mode, ret);
281 	}
282 	return ret;
283 }
284 
285 static int asix_write_gpio(struct ueth_data *dev, u16 value, int sleep)
286 {
287 	int ret;
288 
289 	debug("asix_write_gpio() - value = 0x%04x\n", value);
290 	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
291 	if (ret < 0) {
292 		debug("Failed to write GPIO value 0x%04x: %02x\n",
293 			value, ret);
294 	}
295 	if (sleep)
296 		udelay(sleep * 1000);
297 
298 	return ret;
299 }
300 
301 static int asix_write_hwaddr_common(struct ueth_data *dev, uint8_t *enetaddr)
302 {
303 	int ret;
304 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
305 
306 	memcpy(buf, enetaddr, ETH_ALEN);
307 
308 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, buf);
309 	if (ret < 0)
310 		debug("Failed to set MAC address: %02x\n", ret);
311 
312 	return ret;
313 }
314 
315 /*
316  * mii commands
317  */
318 
319 /*
320  * mii_nway_restart - restart NWay (autonegotiation) for this interface
321  *
322  * Returns 0 on success, negative on error.
323  */
324 static int mii_nway_restart(struct ueth_data *dev)
325 {
326 	int bmcr;
327 	int r = -1;
328 
329 	/* if autoneg is off, it's an error */
330 	bmcr = asix_mdio_read(dev, dev->phy_id, MII_BMCR);
331 
332 	if (bmcr & BMCR_ANENABLE) {
333 		bmcr |= BMCR_ANRESTART;
334 		asix_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr);
335 		r = 0;
336 	}
337 
338 	return r;
339 }
340 
341 static int asix_read_mac_common(struct ueth_data *dev,
342 				struct asix_private *priv, uint8_t *enetaddr)
343 {
344 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
345 	int i;
346 
347 	if (priv->flags & FLAG_EEPROM_MAC) {
348 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
349 			if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
350 					  0x04 + i, 0, 2, buf) < 0) {
351 				debug("Failed to read SROM address 04h.\n");
352 				return -1;
353 			}
354 			memcpy(enetaddr + i * 2, buf, 2);
355 		}
356 	} else {
357 		if (asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)
358 		     < 0) {
359 			debug("Failed to read MAC address.\n");
360 			return -1;
361 		}
362 		memcpy(enetaddr, buf, ETH_ALEN);
363 	}
364 
365 	return 0;
366 }
367 
368 static int asix_basic_reset(struct ueth_data *dev)
369 {
370 	int embd_phy;
371 	u16 rx_ctl;
372 
373 	if (asix_write_gpio(dev,
374 			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5) < 0)
375 		return -1;
376 
377 	/* 0x10 is the phy id of the embedded 10/100 ethernet phy */
378 	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
379 	if (asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
380 				embd_phy, 0, 0, NULL) < 0) {
381 		debug("Select PHY #1 failed\n");
382 		return -1;
383 	}
384 
385 	if (asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL) < 0)
386 		return -1;
387 
388 	if (asix_sw_reset(dev, AX_SWRESET_CLEAR) < 0)
389 		return -1;
390 
391 	if (embd_phy) {
392 		if (asix_sw_reset(dev, AX_SWRESET_IPRL) < 0)
393 			return -1;
394 	} else {
395 		if (asix_sw_reset(dev, AX_SWRESET_PRTE) < 0)
396 			return -1;
397 	}
398 
399 	rx_ctl = asix_read_rx_ctl(dev);
400 	debug("RX_CTL is 0x%04x after software reset\n", rx_ctl);
401 	if (asix_write_rx_ctl(dev, 0x0000) < 0)
402 		return -1;
403 
404 	rx_ctl = asix_read_rx_ctl(dev);
405 	debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
406 
407 	dev->phy_id = asix_get_phy_addr(dev);
408 	if (dev->phy_id < 0)
409 		debug("Failed to read phy id\n");
410 
411 	asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
412 	asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
413 			ADVERTISE_ALL | ADVERTISE_CSMA);
414 	mii_nway_restart(dev);
415 
416 	if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
417 		return -1;
418 
419 	if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
420 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
421 				AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
422 		debug("Write IPG,IPG1,IPG2 failed\n");
423 		return -1;
424 	}
425 
426 	return 0;
427 }
428 
429 static int asix_init_common(struct ueth_data *dev, uint8_t *enetaddr)
430 {
431 	int timeout = 0;
432 #define TIMEOUT_RESOLUTION 50	/* ms */
433 	int link_detected;
434 	u32 ctl = AX_DEFAULT_RX_CTL;
435 
436 	debug("** %s()\n", __func__);
437 
438 	if ((dev->pusb_dev->descriptor.idVendor == ASIX_USB_VENDOR_ID) &&
439 	    (dev->pusb_dev->descriptor.idProduct == AX88772B_USB_PRODUCT_ID))
440 		ctl |= AX_RX_HEADER_DEFAULT;
441 
442 	if (asix_write_rx_ctl(dev, ctl) < 0)
443 		goto out_err;
444 
445 	if (asix_write_hwaddr_common(dev, enetaddr) < 0)
446 		goto out_err;
447 
448 	do {
449 		link_detected = asix_mdio_read(dev, dev->phy_id, MII_BMSR) &
450 			BMSR_LSTATUS;
451 		if (!link_detected) {
452 			if (timeout == 0)
453 				printf("Waiting for Ethernet connection... ");
454 			udelay(TIMEOUT_RESOLUTION * 1000);
455 			timeout += TIMEOUT_RESOLUTION;
456 		}
457 	} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
458 	if (link_detected) {
459 		if (timeout != 0)
460 			printf("done.\n");
461 	} else {
462 		printf("unable to connect.\n");
463 		goto out_err;
464 	}
465 
466 	/*
467 	 * Wait some more to avoid timeout on first transfer
468 	 * (e.g. EHCI timed out on TD - token=0x8008d80)
469 	 */
470 	mdelay(25);
471 
472 	return 0;
473 out_err:
474 	return -1;
475 }
476 
477 static int asix_send_common(struct ueth_data *dev, void *packet, int length)
478 {
479 	int err;
480 	u32 packet_len;
481 	int actual_len;
482 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
483 		PKTSIZE + sizeof(packet_len));
484 
485 	debug("** %s(), len %d\n", __func__, length);
486 
487 	packet_len = (((length) ^ 0x0000ffff) << 16) + (length);
488 	cpu_to_le32s(&packet_len);
489 
490 	memcpy(msg, &packet_len, sizeof(packet_len));
491 	memcpy(msg + sizeof(packet_len), (void *)packet, length);
492 
493 	err = usb_bulk_msg(dev->pusb_dev,
494 				usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
495 				(void *)msg,
496 				length + sizeof(packet_len),
497 				&actual_len,
498 				USB_BULK_SEND_TIMEOUT);
499 	debug("Tx: len = %zu, actual = %u, err = %d\n",
500 			length + sizeof(packet_len), actual_len, err);
501 
502 	return err;
503 }
504 
505 #ifndef CONFIG_DM_ETH
506 /*
507  * Asix callbacks
508  */
509 static int asix_init(struct eth_device *eth, bd_t *bd)
510 {
511 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
512 
513 	return asix_init_common(dev, eth->enetaddr);
514 }
515 
516 static int asix_send(struct eth_device *eth, void *packet, int length)
517 {
518 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
519 
520 	return asix_send_common(dev, packet, length);
521 }
522 
523 static int asix_recv(struct eth_device *eth)
524 {
525 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
526 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE);
527 	unsigned char *buf_ptr;
528 	int err;
529 	int actual_len;
530 	u32 packet_len;
531 
532 	debug("** %s()\n", __func__);
533 
534 	err = usb_bulk_msg(dev->pusb_dev,
535 				usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
536 				(void *)recv_buf,
537 				AX_RX_URB_SIZE,
538 				&actual_len,
539 				USB_BULK_RECV_TIMEOUT);
540 	debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
541 		actual_len, err);
542 	if (err != 0) {
543 		debug("Rx: failed to receive\n");
544 		return -1;
545 	}
546 	if (actual_len > AX_RX_URB_SIZE) {
547 		debug("Rx: received too many bytes %d\n", actual_len);
548 		return -1;
549 	}
550 
551 	buf_ptr = recv_buf;
552 	while (actual_len > 0) {
553 		/*
554 		 * 1st 4 bytes contain the length of the actual data as two
555 		 * complementary 16-bit words. Extract the length of the data.
556 		 */
557 		if (actual_len < sizeof(packet_len)) {
558 			debug("Rx: incomplete packet length\n");
559 			return -1;
560 		}
561 		memcpy(&packet_len, buf_ptr, sizeof(packet_len));
562 		le32_to_cpus(&packet_len);
563 		if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) {
564 			debug("Rx: malformed packet length: %#x (%#x:%#x)\n",
565 			      packet_len, (~packet_len >> 16) & 0x7ff,
566 			      packet_len & 0x7ff);
567 			return -1;
568 		}
569 		packet_len = packet_len & 0x7ff;
570 		if (packet_len > actual_len - sizeof(packet_len)) {
571 			debug("Rx: too large packet: %d\n", packet_len);
572 			return -1;
573 		}
574 
575 		if ((dev->pusb_dev->descriptor.idVendor ==
576 		     ASIX_USB_VENDOR_ID) &&
577 		    (dev->pusb_dev->descriptor.idProduct ==
578 		     AX88772B_USB_PRODUCT_ID))
579 			buf_ptr += 2;
580 
581 		/* Notify net stack */
582 		net_process_received_packet(buf_ptr + sizeof(packet_len),
583 					    packet_len);
584 
585 		/* Adjust for next iteration. Packets are padded to 16-bits */
586 		if (packet_len & 1)
587 			packet_len++;
588 		actual_len -= sizeof(packet_len) + packet_len;
589 		buf_ptr += sizeof(packet_len) + packet_len;
590 	}
591 
592 	return err;
593 }
594 
595 static void asix_halt(struct eth_device *eth)
596 {
597 	debug("** %s()\n", __func__);
598 }
599 
600 static int asix_write_hwaddr(struct eth_device *eth)
601 {
602 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
603 
604 	return asix_write_hwaddr_common(dev, eth->enetaddr);
605 }
606 
607 /*
608  * Asix probing functions
609  */
610 void asix_eth_before_probe(void)
611 {
612 	curr_eth_dev = 0;
613 }
614 
615 struct asix_dongle {
616 	unsigned short vendor;
617 	unsigned short product;
618 	int flags;
619 };
620 
621 static const struct asix_dongle asix_dongles[] = {
622 	{ 0x05ac, 0x1402, FLAG_TYPE_AX88772 },	/* Apple USB Ethernet Adapter */
623 	{ 0x07d1, 0x3c05, FLAG_TYPE_AX88772 },	/* D-Link DUB-E100 H/W Ver B1 */
624 	{ 0x2001, 0x1a02, FLAG_TYPE_AX88772 },	/* D-Link DUB-E100 H/W Ver C1 */
625 	/* Cables-to-Go USB Ethernet Adapter */
626 	{ 0x0b95, 0x772a, FLAG_TYPE_AX88772 },
627 	{ 0x0b95, 0x7720, FLAG_TYPE_AX88772 },	/* Trendnet TU2-ET100 V3.0R */
628 	{ 0x0b95, 0x1720, FLAG_TYPE_AX88172 },	/* SMC */
629 	{ 0x0db0, 0xa877, FLAG_TYPE_AX88772 },	/* MSI - ASIX 88772a */
630 	{ 0x13b1, 0x0018, FLAG_TYPE_AX88172 },	/* Linksys 200M v2.1 */
631 	{ 0x1557, 0x7720, FLAG_TYPE_AX88772 },	/* 0Q0 cable ethernet */
632 	/* DLink DUB-E100 H/W Ver B1 Alternate */
633 	{ 0x2001, 0x3c05, FLAG_TYPE_AX88772 },
634 	/* ASIX 88772B */
635 	{ 0x0b95, 0x772b, FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC },
636 	{ 0x0b95, 0x7e2b, FLAG_TYPE_AX88772B },
637 	{ 0x0000, 0x0000, FLAG_NONE }	/* END - Do not remove */
638 };
639 
640 /* Probe to see if a new device is actually an asix device */
641 int asix_eth_probe(struct usb_device *dev, unsigned int ifnum,
642 		      struct ueth_data *ss)
643 {
644 	struct usb_interface *iface;
645 	struct usb_interface_descriptor *iface_desc;
646 	int ep_in_found = 0, ep_out_found = 0;
647 	int i;
648 
649 	/* let's examine the device now */
650 	iface = &dev->config.if_desc[ifnum];
651 	iface_desc = &dev->config.if_desc[ifnum].desc;
652 
653 	for (i = 0; asix_dongles[i].vendor != 0; i++) {
654 		if (dev->descriptor.idVendor == asix_dongles[i].vendor &&
655 		    dev->descriptor.idProduct == asix_dongles[i].product)
656 			/* Found a supported dongle */
657 			break;
658 	}
659 
660 	if (asix_dongles[i].vendor == 0)
661 		return 0;
662 
663 	memset(ss, 0, sizeof(struct ueth_data));
664 
665 	/* At this point, we know we've got a live one */
666 	debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n",
667 	      dev->descriptor.idVendor, dev->descriptor.idProduct);
668 
669 	/* Initialize the ueth_data structure with some useful info */
670 	ss->ifnum = ifnum;
671 	ss->pusb_dev = dev;
672 	ss->subclass = iface_desc->bInterfaceSubClass;
673 	ss->protocol = iface_desc->bInterfaceProtocol;
674 
675 	/* alloc driver private */
676 	ss->dev_priv = calloc(1, sizeof(struct asix_private));
677 	if (!ss->dev_priv)
678 		return 0;
679 
680 	((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags;
681 
682 	/*
683 	 * We are expecting a minimum of 3 endpoints - in, out (bulk), and
684 	 * int. We will ignore any others.
685 	 */
686 	for (i = 0; i < iface_desc->bNumEndpoints; i++) {
687 		/* is it an BULK endpoint? */
688 		if ((iface->ep_desc[i].bmAttributes &
689 		     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
690 			u8 ep_addr = iface->ep_desc[i].bEndpointAddress;
691 			if (ep_addr & USB_DIR_IN) {
692 				if (!ep_in_found) {
693 					ss->ep_in = ep_addr &
694 						USB_ENDPOINT_NUMBER_MASK;
695 					ep_in_found = 1;
696 				}
697 			} else {
698 				if (!ep_out_found) {
699 					ss->ep_out = ep_addr &
700 						USB_ENDPOINT_NUMBER_MASK;
701 					ep_out_found = 1;
702 				}
703 			}
704 		}
705 
706 		/* is it an interrupt endpoint? */
707 		if ((iface->ep_desc[i].bmAttributes &
708 		    USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
709 			ss->ep_int = iface->ep_desc[i].bEndpointAddress &
710 				USB_ENDPOINT_NUMBER_MASK;
711 			ss->irqinterval = iface->ep_desc[i].bInterval;
712 		}
713 	}
714 	debug("Endpoints In %d Out %d Int %d\n",
715 		  ss->ep_in, ss->ep_out, ss->ep_int);
716 
717 	/* Do some basic sanity checks, and bail if we find a problem */
718 	if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
719 	    !ss->ep_in || !ss->ep_out || !ss->ep_int) {
720 		debug("Problems with device\n");
721 		return 0;
722 	}
723 	dev->privptr = (void *)ss;
724 	return 1;
725 }
726 
727 int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
728 				struct eth_device *eth)
729 {
730 	struct asix_private *priv = (struct asix_private *)ss->dev_priv;
731 
732 	if (!eth) {
733 		debug("%s: missing parameter.\n", __func__);
734 		return 0;
735 	}
736 	sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++);
737 	eth->init = asix_init;
738 	eth->send = asix_send;
739 	eth->recv = asix_recv;
740 	eth->halt = asix_halt;
741 	if (!(priv->flags & FLAG_TYPE_AX88172))
742 		eth->write_hwaddr = asix_write_hwaddr;
743 	eth->priv = ss;
744 
745 	if (asix_basic_reset(ss))
746 		return 0;
747 
748 	/* Get the MAC address */
749 	if (asix_read_mac_common(ss, priv, eth->enetaddr))
750 		return 0;
751 	debug("MAC %pM\n", eth->enetaddr);
752 
753 	return 1;
754 }
755 #endif
756 
757 #ifdef CONFIG_DM_ETH
758 static int asix_eth_start(struct udevice *dev)
759 {
760 	struct eth_pdata *pdata = dev_get_platdata(dev);
761 	struct asix_private *priv = dev_get_priv(dev);
762 
763 	return asix_init_common(&priv->ueth, pdata->enetaddr);
764 }
765 
766 void asix_eth_stop(struct udevice *dev)
767 {
768 	debug("** %s()\n", __func__);
769 }
770 
771 int asix_eth_send(struct udevice *dev, void *packet, int length)
772 {
773 	struct asix_private *priv = dev_get_priv(dev);
774 
775 	return asix_send_common(&priv->ueth, packet, length);
776 }
777 
778 int asix_eth_recv(struct udevice *dev, int flags, uchar **packetp)
779 {
780 	struct asix_private *priv = dev_get_priv(dev);
781 	struct ueth_data *ueth = &priv->ueth;
782 	uint8_t *ptr;
783 	int ret, len;
784 	u32 packet_len;
785 
786 	len = usb_ether_get_rx_bytes(ueth, &ptr);
787 	debug("%s: first try, len=%d\n", __func__, len);
788 	if (!len) {
789 		if (!(flags & ETH_RECV_CHECK_DEVICE))
790 			return -EAGAIN;
791 		ret = usb_ether_receive(ueth, AX_RX_URB_SIZE);
792 		if (ret == -EAGAIN)
793 			return ret;
794 
795 		len = usb_ether_get_rx_bytes(ueth, &ptr);
796 		debug("%s: second try, len=%d\n", __func__, len);
797 	}
798 
799 	/*
800 	 * 1st 4 bytes contain the length of the actual data as two
801 	 * complementary 16-bit words. Extract the length of the data.
802 	 */
803 	if (len < sizeof(packet_len)) {
804 		debug("Rx: incomplete packet length\n");
805 		goto err;
806 	}
807 	memcpy(&packet_len, ptr, sizeof(packet_len));
808 	le32_to_cpus(&packet_len);
809 	if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) {
810 		debug("Rx: malformed packet length: %#x (%#x:%#x)\n",
811 		      packet_len, (~packet_len >> 16) & 0x7ff,
812 		      packet_len & 0x7ff);
813 		goto err;
814 	}
815 	packet_len = packet_len & 0x7ff;
816 	if (packet_len > len - sizeof(packet_len)) {
817 		debug("Rx: too large packet: %d\n", packet_len);
818 		goto err;
819 	}
820 
821 	*packetp = ptr + sizeof(packet_len);
822 	return packet_len;
823 
824 err:
825 	usb_ether_advance_rxbuf(ueth, -1);
826 	return -EINVAL;
827 }
828 
829 static int asix_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
830 {
831 	struct asix_private *priv = dev_get_priv(dev);
832 
833 	if (packet_len & 1)
834 		packet_len++;
835 	usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
836 
837 	return 0;
838 }
839 
840 int asix_write_hwaddr(struct udevice *dev)
841 {
842 	struct eth_pdata *pdata = dev_get_platdata(dev);
843 	struct asix_private *priv = dev_get_priv(dev);
844 
845 	if (priv->flags & FLAG_TYPE_AX88172)
846 		return -ENOSYS;
847 
848 	return asix_write_hwaddr_common(&priv->ueth, pdata->enetaddr);
849 }
850 
851 static int asix_eth_probe(struct udevice *dev)
852 {
853 	struct eth_pdata *pdata = dev_get_platdata(dev);
854 	struct asix_private *priv = dev_get_priv(dev);
855 	struct ueth_data *ss = &priv->ueth;
856 	int ret;
857 
858 	priv->flags = dev->driver_data;
859 	ret = usb_ether_register(dev, ss, AX_RX_URB_SIZE);
860 	if (ret)
861 		return ret;
862 
863 	ret = asix_basic_reset(ss);
864 	if (ret)
865 		goto err;
866 
867 	/* Get the MAC address */
868 	ret = asix_read_mac_common(ss, priv, pdata->enetaddr);
869 	if (ret)
870 		goto err;
871 	debug("MAC %pM\n", pdata->enetaddr);
872 
873 	return 0;
874 
875 err:
876 	return usb_ether_deregister(ss);
877 }
878 
879 static const struct eth_ops asix_eth_ops = {
880 	.start	= asix_eth_start,
881 	.send	= asix_eth_send,
882 	.recv	= asix_eth_recv,
883 	.free_pkt = asix_free_pkt,
884 	.stop	= asix_eth_stop,
885 	.write_hwaddr = asix_write_hwaddr,
886 };
887 
888 U_BOOT_DRIVER(asix_eth) = {
889 	.name	= "asix_eth",
890 	.id	= UCLASS_ETH,
891 	.probe = asix_eth_probe,
892 	.ops	= &asix_eth_ops,
893 	.priv_auto_alloc_size = sizeof(struct asix_private),
894 	.platdata_auto_alloc_size = sizeof(struct eth_pdata),
895 };
896 
897 static const struct usb_device_id asix_eth_id_table[] = {
898 	/* Apple USB Ethernet Adapter */
899 	{ USB_DEVICE(0x05ac, 0x1402), .driver_info = FLAG_TYPE_AX88772 },
900 	/* D-Link DUB-E100 H/W Ver B1 */
901 	{ USB_DEVICE(0x07d1, 0x3c05), .driver_info = FLAG_TYPE_AX88772 },
902 	/* D-Link DUB-E100 H/W Ver C1 */
903 	{ USB_DEVICE(0x2001, 0x1a02), .driver_info = FLAG_TYPE_AX88772 },
904 	/* Cables-to-Go USB Ethernet Adapter */
905 	{ USB_DEVICE(0x0b95, 0x772a), .driver_info = FLAG_TYPE_AX88772 },
906 	/* Trendnet TU2-ET100 V3.0R */
907 	{ USB_DEVICE(0x0b95, 0x7720), .driver_info = FLAG_TYPE_AX88772 },
908 	/* SMC */
909 	{ USB_DEVICE(0x0b95, 0x1720), .driver_info = FLAG_TYPE_AX88172 },
910 	/* MSI - ASIX 88772a */
911 	{ USB_DEVICE(0x0db0, 0xa877), .driver_info = FLAG_TYPE_AX88772 },
912 	/* Linksys 200M v2.1 */
913 	{ USB_DEVICE(0x13b1, 0x0018), .driver_info = FLAG_TYPE_AX88172 },
914 	/* 0Q0 cable ethernet */
915 	{ USB_DEVICE(0x1557, 0x7720), .driver_info = FLAG_TYPE_AX88772 },
916 	/* DLink DUB-E100 H/W Ver B1 Alternate */
917 	{ USB_DEVICE(0x2001, 0x3c05), .driver_info = FLAG_TYPE_AX88772 },
918 	/* ASIX 88772B */
919 	{ USB_DEVICE(0x0b95, 0x772b),
920 		.driver_info = FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC },
921 	{ USB_DEVICE(0x0b95, 0x7e2b), .driver_info = FLAG_TYPE_AX88772B },
922 	{ }		/* Terminating entry */
923 };
924 
925 U_BOOT_USB_DEVICE(asix_eth, asix_eth_id_table);
926 #endif
927