xref: /openbmc/u-boot/drivers/usb/eth/asix.c (revision 901d0ea1)
1 /*
2  * Copyright (c) 2011 The Chromium OS Authors.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <usb.h>
9 #include <linux/mii.h>
10 #include "usb_ether.h"
11 #include <malloc.h>
12 
13 
14 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
15 
16 #define AX_CMD_SET_SW_MII		0x06
17 #define AX_CMD_READ_MII_REG		0x07
18 #define AX_CMD_WRITE_MII_REG		0x08
19 #define AX_CMD_SET_HW_MII		0x0a
20 #define AX_CMD_READ_EEPROM		0x0b
21 #define AX_CMD_READ_RX_CTL		0x0f
22 #define AX_CMD_WRITE_RX_CTL		0x10
23 #define AX_CMD_WRITE_IPG0		0x12
24 #define AX_CMD_READ_NODE_ID		0x13
25 #define AX_CMD_WRITE_NODE_ID	0x14
26 #define AX_CMD_READ_PHY_ID		0x19
27 #define AX_CMD_WRITE_MEDIUM_MODE	0x1b
28 #define AX_CMD_WRITE_GPIOS		0x1f
29 #define AX_CMD_SW_RESET			0x20
30 #define AX_CMD_SW_PHY_SELECT		0x22
31 
32 #define AX_SWRESET_CLEAR		0x00
33 #define AX_SWRESET_PRTE			0x04
34 #define AX_SWRESET_PRL			0x08
35 #define AX_SWRESET_IPRL			0x20
36 #define AX_SWRESET_IPPD			0x40
37 
38 #define AX88772_IPG0_DEFAULT		0x15
39 #define AX88772_IPG1_DEFAULT		0x0c
40 #define AX88772_IPG2_DEFAULT		0x12
41 
42 /* AX88772 & AX88178 Medium Mode Register */
43 #define AX_MEDIUM_PF		0x0080
44 #define AX_MEDIUM_JFE		0x0040
45 #define AX_MEDIUM_TFC		0x0020
46 #define AX_MEDIUM_RFC		0x0010
47 #define AX_MEDIUM_ENCK		0x0008
48 #define AX_MEDIUM_AC		0x0004
49 #define AX_MEDIUM_FD		0x0002
50 #define AX_MEDIUM_GM		0x0001
51 #define AX_MEDIUM_SM		0x1000
52 #define AX_MEDIUM_SBP		0x0800
53 #define AX_MEDIUM_PS		0x0200
54 #define AX_MEDIUM_RE		0x0100
55 
56 #define AX88178_MEDIUM_DEFAULT	\
57 	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
58 	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
59 	 AX_MEDIUM_RE)
60 
61 #define AX88772_MEDIUM_DEFAULT	\
62 	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
63 	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
64 	 AX_MEDIUM_AC | AX_MEDIUM_RE)
65 
66 /* AX88772 & AX88178 RX_CTL values */
67 #define AX_RX_CTL_SO			0x0080
68 #define AX_RX_CTL_AB			0x0008
69 
70 #define AX_DEFAULT_RX_CTL	\
71 	(AX_RX_CTL_SO | AX_RX_CTL_AB)
72 
73 /* GPIO 2 toggles */
74 #define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
75 #define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
76 #define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
77 
78 /* local defines */
79 #define ASIX_BASE_NAME "asx"
80 #define USB_CTRL_SET_TIMEOUT 5000
81 #define USB_CTRL_GET_TIMEOUT 5000
82 #define USB_BULK_SEND_TIMEOUT 5000
83 #define USB_BULK_RECV_TIMEOUT 5000
84 
85 #define AX_RX_URB_SIZE 2048
86 #define PHY_CONNECT_TIMEOUT 5000
87 
88 /* asix_flags defines */
89 #define FLAG_NONE			0
90 #define FLAG_TYPE_AX88172	(1U << 0)
91 #define FLAG_TYPE_AX88772	(1U << 1)
92 #define FLAG_TYPE_AX88772B	(1U << 2)
93 #define FLAG_EEPROM_MAC		(1U << 3) /* initial mac address in eeprom */
94 
95 /* local vars */
96 static int curr_eth_dev; /* index for name of next device detected */
97 
98 /* driver private */
99 struct asix_private {
100 	int flags;
101 };
102 
103 /*
104  * Asix infrastructure commands
105  */
106 static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
107 			     u16 size, void *data)
108 {
109 	int len;
110 
111 	debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x "
112 		"size=%d\n", cmd, value, index, size);
113 
114 	len = usb_control_msg(
115 		dev->pusb_dev,
116 		usb_sndctrlpipe(dev->pusb_dev, 0),
117 		cmd,
118 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
119 		value,
120 		index,
121 		data,
122 		size,
123 		USB_CTRL_SET_TIMEOUT);
124 
125 	return len == size ? 0 : -1;
126 }
127 
128 static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index,
129 			    u16 size, void *data)
130 {
131 	int len;
132 
133 	debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n",
134 		cmd, value, index, size);
135 
136 	len = usb_control_msg(
137 		dev->pusb_dev,
138 		usb_rcvctrlpipe(dev->pusb_dev, 0),
139 		cmd,
140 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
141 		value,
142 		index,
143 		data,
144 		size,
145 		USB_CTRL_GET_TIMEOUT);
146 	return len == size ? 0 : -1;
147 }
148 
149 static inline int asix_set_sw_mii(struct ueth_data *dev)
150 {
151 	int ret;
152 
153 	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
154 	if (ret < 0)
155 		debug("Failed to enable software MII access\n");
156 	return ret;
157 }
158 
159 static inline int asix_set_hw_mii(struct ueth_data *dev)
160 {
161 	int ret;
162 
163 	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
164 	if (ret < 0)
165 		debug("Failed to enable hardware MII access\n");
166 	return ret;
167 }
168 
169 static int asix_mdio_read(struct ueth_data *dev, int phy_id, int loc)
170 {
171 	ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1);
172 
173 	asix_set_sw_mii(dev);
174 	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, res);
175 	asix_set_hw_mii(dev);
176 
177 	debug("asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
178 			phy_id, loc, le16_to_cpu(*res));
179 
180 	return le16_to_cpu(*res);
181 }
182 
183 static void
184 asix_mdio_write(struct ueth_data *dev, int phy_id, int loc, int val)
185 {
186 	ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1);
187 	*res = cpu_to_le16(val);
188 
189 	debug("asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
190 			phy_id, loc, val);
191 	asix_set_sw_mii(dev);
192 	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, res);
193 	asix_set_hw_mii(dev);
194 }
195 
196 /*
197  * Asix "high level" commands
198  */
199 static int asix_sw_reset(struct ueth_data *dev, u8 flags)
200 {
201 	int ret;
202 
203 	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
204 	if (ret < 0)
205 		debug("Failed to send software reset: %02x\n", ret);
206 	else
207 		udelay(150 * 1000);
208 
209 	return ret;
210 }
211 
212 static inline int asix_get_phy_addr(struct ueth_data *dev)
213 {
214 	ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 2);
215 
216 	int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
217 
218 	debug("asix_get_phy_addr()\n");
219 
220 	if (ret < 0) {
221 		debug("Error reading PHYID register: %02x\n", ret);
222 		goto out;
223 	}
224 	debug("asix_get_phy_addr() returning 0x%02x%02x\n", buf[0], buf[1]);
225 	ret = buf[1];
226 
227 out:
228 	return ret;
229 }
230 
231 static int asix_write_medium_mode(struct ueth_data *dev, u16 mode)
232 {
233 	int ret;
234 
235 	debug("asix_write_medium_mode() - mode = 0x%04x\n", mode);
236 	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode,
237 			0, 0, NULL);
238 	if (ret < 0) {
239 		debug("Failed to write Medium Mode mode to 0x%04x: %02x\n",
240 			mode, ret);
241 	}
242 	return ret;
243 }
244 
245 static u16 asix_read_rx_ctl(struct ueth_data *dev)
246 {
247 	ALLOC_CACHE_ALIGN_BUFFER(__le16, v, 1);
248 
249 	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, v);
250 
251 	if (ret < 0)
252 		debug("Error reading RX_CTL register: %02x\n", ret);
253 	else
254 		ret = le16_to_cpu(*v);
255 	return ret;
256 }
257 
258 static int asix_write_rx_ctl(struct ueth_data *dev, u16 mode)
259 {
260 	int ret;
261 
262 	debug("asix_write_rx_ctl() - mode = 0x%04x\n", mode);
263 	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
264 	if (ret < 0) {
265 		debug("Failed to write RX_CTL mode to 0x%04x: %02x\n",
266 				mode, ret);
267 	}
268 	return ret;
269 }
270 
271 static int asix_write_gpio(struct ueth_data *dev, u16 value, int sleep)
272 {
273 	int ret;
274 
275 	debug("asix_write_gpio() - value = 0x%04x\n", value);
276 	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
277 	if (ret < 0) {
278 		debug("Failed to write GPIO value 0x%04x: %02x\n",
279 			value, ret);
280 	}
281 	if (sleep)
282 		udelay(sleep * 1000);
283 
284 	return ret;
285 }
286 
287 static int asix_write_hwaddr(struct eth_device *eth)
288 {
289 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
290 	int ret;
291 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
292 
293 	memcpy(buf, eth->enetaddr, ETH_ALEN);
294 
295 	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, buf);
296 	if (ret < 0)
297 		debug("Failed to set MAC address: %02x\n", ret);
298 
299 	return ret;
300 }
301 
302 /*
303  * mii commands
304  */
305 
306 /*
307  * mii_nway_restart - restart NWay (autonegotiation) for this interface
308  *
309  * Returns 0 on success, negative on error.
310  */
311 static int mii_nway_restart(struct ueth_data *dev)
312 {
313 	int bmcr;
314 	int r = -1;
315 
316 	/* if autoneg is off, it's an error */
317 	bmcr = asix_mdio_read(dev, dev->phy_id, MII_BMCR);
318 
319 	if (bmcr & BMCR_ANENABLE) {
320 		bmcr |= BMCR_ANRESTART;
321 		asix_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr);
322 		r = 0;
323 	}
324 
325 	return r;
326 }
327 
328 static int asix_read_mac(struct eth_device *eth)
329 {
330 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
331 	struct asix_private *priv = (struct asix_private *)dev->dev_priv;
332 	int i;
333 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN);
334 
335 	if (priv->flags & FLAG_EEPROM_MAC) {
336 		for (i = 0; i < (ETH_ALEN >> 1); i++) {
337 			if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
338 					  0x04 + i, 0, 2, buf) < 0) {
339 				debug("Failed to read SROM address 04h.\n");
340 				return -1;
341 			}
342 			memcpy((eth->enetaddr + i * 2), buf, 2);
343 		}
344 	} else {
345 		if (asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf)
346 		     < 0) {
347 			debug("Failed to read MAC address.\n");
348 			return -1;
349 		}
350 		memcpy(eth->enetaddr, buf, ETH_ALEN);
351 	}
352 
353 	return 0;
354 }
355 
356 static int asix_basic_reset(struct ueth_data *dev)
357 {
358 	int embd_phy;
359 	u16 rx_ctl;
360 
361 	if (asix_write_gpio(dev,
362 			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5) < 0)
363 		return -1;
364 
365 	/* 0x10 is the phy id of the embedded 10/100 ethernet phy */
366 	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
367 	if (asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
368 				embd_phy, 0, 0, NULL) < 0) {
369 		debug("Select PHY #1 failed\n");
370 		return -1;
371 	}
372 
373 	if (asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL) < 0)
374 		return -1;
375 
376 	if (asix_sw_reset(dev, AX_SWRESET_CLEAR) < 0)
377 		return -1;
378 
379 	if (embd_phy) {
380 		if (asix_sw_reset(dev, AX_SWRESET_IPRL) < 0)
381 			return -1;
382 	} else {
383 		if (asix_sw_reset(dev, AX_SWRESET_PRTE) < 0)
384 			return -1;
385 	}
386 
387 	rx_ctl = asix_read_rx_ctl(dev);
388 	debug("RX_CTL is 0x%04x after software reset\n", rx_ctl);
389 	if (asix_write_rx_ctl(dev, 0x0000) < 0)
390 		return -1;
391 
392 	rx_ctl = asix_read_rx_ctl(dev);
393 	debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
394 
395 	dev->phy_id = asix_get_phy_addr(dev);
396 	if (dev->phy_id < 0)
397 		debug("Failed to read phy id\n");
398 
399 	asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
400 	asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
401 			ADVERTISE_ALL | ADVERTISE_CSMA);
402 	mii_nway_restart(dev);
403 
404 	if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0)
405 		return -1;
406 
407 	if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
408 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
409 				AX88772_IPG2_DEFAULT, 0, NULL) < 0) {
410 		debug("Write IPG,IPG1,IPG2 failed\n");
411 		return -1;
412 	}
413 
414 	return 0;
415 }
416 
417 /*
418  * Asix callbacks
419  */
420 static int asix_init(struct eth_device *eth, bd_t *bd)
421 {
422 	struct ueth_data	*dev = (struct ueth_data *)eth->priv;
423 	int timeout = 0;
424 #define TIMEOUT_RESOLUTION 50	/* ms */
425 	int link_detected;
426 
427 	debug("** %s()\n", __func__);
428 
429 	if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0)
430 		goto out_err;
431 
432 	do {
433 		link_detected = asix_mdio_read(dev, dev->phy_id, MII_BMSR) &
434 			BMSR_LSTATUS;
435 		if (!link_detected) {
436 			if (timeout == 0)
437 				printf("Waiting for Ethernet connection... ");
438 			udelay(TIMEOUT_RESOLUTION * 1000);
439 			timeout += TIMEOUT_RESOLUTION;
440 		}
441 	} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
442 	if (link_detected) {
443 		if (timeout != 0)
444 			printf("done.\n");
445 	} else {
446 		printf("unable to connect.\n");
447 		goto out_err;
448 	}
449 
450 	return 0;
451 out_err:
452 	return -1;
453 }
454 
455 static int asix_send(struct eth_device *eth, void *packet, int length)
456 {
457 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
458 	int err;
459 	u32 packet_len;
460 	int actual_len;
461 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
462 		PKTSIZE + sizeof(packet_len));
463 
464 	debug("** %s(), len %d\n", __func__, length);
465 
466 	packet_len = (((length) ^ 0x0000ffff) << 16) + (length);
467 	cpu_to_le32s(&packet_len);
468 
469 	memcpy(msg, &packet_len, sizeof(packet_len));
470 	memcpy(msg + sizeof(packet_len), (void *)packet, length);
471 	if (length & 1)
472 		length++;
473 
474 	err = usb_bulk_msg(dev->pusb_dev,
475 				usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
476 				(void *)msg,
477 				length + sizeof(packet_len),
478 				&actual_len,
479 				USB_BULK_SEND_TIMEOUT);
480 	debug("Tx: len = %u, actual = %u, err = %d\n",
481 			length + sizeof(packet_len), actual_len, err);
482 
483 	return err;
484 }
485 
486 static int asix_recv(struct eth_device *eth)
487 {
488 	struct ueth_data *dev = (struct ueth_data *)eth->priv;
489 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE);
490 	unsigned char *buf_ptr;
491 	int err;
492 	int actual_len;
493 	u32 packet_len;
494 
495 	debug("** %s()\n", __func__);
496 
497 	err = usb_bulk_msg(dev->pusb_dev,
498 				usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
499 				(void *)recv_buf,
500 				AX_RX_URB_SIZE,
501 				&actual_len,
502 				USB_BULK_RECV_TIMEOUT);
503 	debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
504 		actual_len, err);
505 	if (err != 0) {
506 		debug("Rx: failed to receive\n");
507 		return -1;
508 	}
509 	if (actual_len > AX_RX_URB_SIZE) {
510 		debug("Rx: received too many bytes %d\n", actual_len);
511 		return -1;
512 	}
513 
514 	buf_ptr = recv_buf;
515 	while (actual_len > 0) {
516 		/*
517 		 * 1st 4 bytes contain the length of the actual data as two
518 		 * complementary 16-bit words. Extract the length of the data.
519 		 */
520 		if (actual_len < sizeof(packet_len)) {
521 			debug("Rx: incomplete packet length\n");
522 			return -1;
523 		}
524 		memcpy(&packet_len, buf_ptr, sizeof(packet_len));
525 		le32_to_cpus(&packet_len);
526 		if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) {
527 			debug("Rx: malformed packet length: %#x (%#x:%#x)\n",
528 			      packet_len, (~packet_len >> 16) & 0x7ff,
529 			      packet_len & 0x7ff);
530 			return -1;
531 		}
532 		packet_len = packet_len & 0x7ff;
533 		if (packet_len > actual_len - sizeof(packet_len)) {
534 			debug("Rx: too large packet: %d\n", packet_len);
535 			return -1;
536 		}
537 
538 		/* Notify net stack */
539 		NetReceive(buf_ptr + sizeof(packet_len), packet_len);
540 
541 		/* Adjust for next iteration. Packets are padded to 16-bits */
542 		if (packet_len & 1)
543 			packet_len++;
544 		actual_len -= sizeof(packet_len) + packet_len;
545 		buf_ptr += sizeof(packet_len) + packet_len;
546 	}
547 
548 	return err;
549 }
550 
551 static void asix_halt(struct eth_device *eth)
552 {
553 	debug("** %s()\n", __func__);
554 }
555 
556 /*
557  * Asix probing functions
558  */
559 void asix_eth_before_probe(void)
560 {
561 	curr_eth_dev = 0;
562 }
563 
564 struct asix_dongle {
565 	unsigned short vendor;
566 	unsigned short product;
567 	int flags;
568 };
569 
570 static const struct asix_dongle const asix_dongles[] = {
571 	{ 0x05ac, 0x1402, FLAG_TYPE_AX88772 },	/* Apple USB Ethernet Adapter */
572 	{ 0x07d1, 0x3c05, FLAG_TYPE_AX88772 },	/* D-Link DUB-E100 H/W Ver B1 */
573 	{ 0x2001, 0x1a02, FLAG_TYPE_AX88772 },	/* D-Link DUB-E100 H/W Ver C1 */
574 	/* Cables-to-Go USB Ethernet Adapter */
575 	{ 0x0b95, 0x772a, FLAG_TYPE_AX88772 },
576 	{ 0x0b95, 0x7720, FLAG_TYPE_AX88772 },	/* Trendnet TU2-ET100 V3.0R */
577 	{ 0x0b95, 0x1720, FLAG_TYPE_AX88172 },	/* SMC */
578 	{ 0x0db0, 0xa877, FLAG_TYPE_AX88772 },	/* MSI - ASIX 88772a */
579 	{ 0x13b1, 0x0018, FLAG_TYPE_AX88172 },	/* Linksys 200M v2.1 */
580 	{ 0x1557, 0x7720, FLAG_TYPE_AX88772 },	/* 0Q0 cable ethernet */
581 	/* DLink DUB-E100 H/W Ver B1 Alternate */
582 	{ 0x2001, 0x3c05, FLAG_TYPE_AX88772 },
583 	/* ASIX 88772B */
584 	{ 0x0b95, 0x772b, FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC },
585 	{ 0x0000, 0x0000, FLAG_NONE }	/* END - Do not remove */
586 };
587 
588 /* Probe to see if a new device is actually an asix device */
589 int asix_eth_probe(struct usb_device *dev, unsigned int ifnum,
590 		      struct ueth_data *ss)
591 {
592 	struct usb_interface *iface;
593 	struct usb_interface_descriptor *iface_desc;
594 	int ep_in_found = 0, ep_out_found = 0;
595 	int i;
596 
597 	/* let's examine the device now */
598 	iface = &dev->config.if_desc[ifnum];
599 	iface_desc = &dev->config.if_desc[ifnum].desc;
600 
601 	for (i = 0; asix_dongles[i].vendor != 0; i++) {
602 		if (dev->descriptor.idVendor == asix_dongles[i].vendor &&
603 		    dev->descriptor.idProduct == asix_dongles[i].product)
604 			/* Found a supported dongle */
605 			break;
606 	}
607 
608 	if (asix_dongles[i].vendor == 0)
609 		return 0;
610 
611 	memset(ss, 0, sizeof(struct ueth_data));
612 
613 	/* At this point, we know we've got a live one */
614 	debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n",
615 	      dev->descriptor.idVendor, dev->descriptor.idProduct);
616 
617 	/* Initialize the ueth_data structure with some useful info */
618 	ss->ifnum = ifnum;
619 	ss->pusb_dev = dev;
620 	ss->subclass = iface_desc->bInterfaceSubClass;
621 	ss->protocol = iface_desc->bInterfaceProtocol;
622 
623 	/* alloc driver private */
624 	ss->dev_priv = calloc(1, sizeof(struct asix_private));
625 	if (!ss->dev_priv)
626 		return 0;
627 
628 	((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags;
629 
630 	/*
631 	 * We are expecting a minimum of 3 endpoints - in, out (bulk), and
632 	 * int. We will ignore any others.
633 	 */
634 	for (i = 0; i < iface_desc->bNumEndpoints; i++) {
635 		/* is it an BULK endpoint? */
636 		if ((iface->ep_desc[i].bmAttributes &
637 		     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
638 			u8 ep_addr = iface->ep_desc[i].bEndpointAddress;
639 			if (ep_addr & USB_DIR_IN) {
640 				if (!ep_in_found) {
641 					ss->ep_in = ep_addr &
642 						USB_ENDPOINT_NUMBER_MASK;
643 					ep_in_found = 1;
644 				}
645 			} else {
646 				if (!ep_out_found) {
647 					ss->ep_out = ep_addr &
648 						USB_ENDPOINT_NUMBER_MASK;
649 					ep_out_found = 1;
650 				}
651 			}
652 		}
653 
654 		/* is it an interrupt endpoint? */
655 		if ((iface->ep_desc[i].bmAttributes &
656 		    USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
657 			ss->ep_int = iface->ep_desc[i].bEndpointAddress &
658 				USB_ENDPOINT_NUMBER_MASK;
659 			ss->irqinterval = iface->ep_desc[i].bInterval;
660 		}
661 	}
662 	debug("Endpoints In %d Out %d Int %d\n",
663 		  ss->ep_in, ss->ep_out, ss->ep_int);
664 
665 	/* Do some basic sanity checks, and bail if we find a problem */
666 	if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
667 	    !ss->ep_in || !ss->ep_out || !ss->ep_int) {
668 		debug("Problems with device\n");
669 		return 0;
670 	}
671 	dev->privptr = (void *)ss;
672 	return 1;
673 }
674 
675 int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
676 				struct eth_device *eth)
677 {
678 	struct asix_private *priv = (struct asix_private *)ss->dev_priv;
679 
680 	if (!eth) {
681 		debug("%s: missing parameter.\n", __func__);
682 		return 0;
683 	}
684 	sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++);
685 	eth->init = asix_init;
686 	eth->send = asix_send;
687 	eth->recv = asix_recv;
688 	eth->halt = asix_halt;
689 	if (!(priv->flags & FLAG_TYPE_AX88172))
690 		eth->write_hwaddr = asix_write_hwaddr;
691 	eth->priv = ss;
692 
693 	if (asix_basic_reset(ss))
694 		return 0;
695 
696 	/* Get the MAC address */
697 	if (asix_read_mac(eth))
698 		return 0;
699 	debug("MAC %pM\n", eth->enetaddr);
700 
701 	return 1;
702 }
703