1 /** 2 * dwc3-omap.c - OMAP Specific Glue layer 3 * 4 * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com 5 * 6 * Authors: Felipe Balbi <balbi@ti.com>, 7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de> 8 * 9 * Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/dwc3-omap.c) and ported 10 * to uboot. 11 * 12 * commit 7ee2566ff5 : usb: dwc3: dwc3-omap: get rid of ->prepare()/->complete() 13 * 14 * SPDX-License-Identifier: GPL-2.0 15 */ 16 17 #include <common.h> 18 #include <malloc.h> 19 #include <asm/io.h> 20 #include <dwc3-omap-uboot.h> 21 #include <linux/usb/dwc3-omap.h> 22 #include <linux/ioport.h> 23 24 #include <linux/usb/otg.h> 25 #include <linux/compat.h> 26 27 #include "linux-compat.h" 28 29 /* 30 * All these registers belong to OMAP's Wrapper around the 31 * DesignWare USB3 Core. 32 */ 33 34 #define USBOTGSS_REVISION 0x0000 35 #define USBOTGSS_SYSCONFIG 0x0010 36 #define USBOTGSS_IRQ_EOI 0x0020 37 #define USBOTGSS_EOI_OFFSET 0x0008 38 #define USBOTGSS_IRQSTATUS_RAW_0 0x0024 39 #define USBOTGSS_IRQSTATUS_0 0x0028 40 #define USBOTGSS_IRQENABLE_SET_0 0x002c 41 #define USBOTGSS_IRQENABLE_CLR_0 0x0030 42 #define USBOTGSS_IRQ0_OFFSET 0x0004 43 #define USBOTGSS_IRQSTATUS_RAW_1 0x0030 44 #define USBOTGSS_IRQSTATUS_1 0x0034 45 #define USBOTGSS_IRQENABLE_SET_1 0x0038 46 #define USBOTGSS_IRQENABLE_CLR_1 0x003c 47 #define USBOTGSS_IRQSTATUS_RAW_2 0x0040 48 #define USBOTGSS_IRQSTATUS_2 0x0044 49 #define USBOTGSS_IRQENABLE_SET_2 0x0048 50 #define USBOTGSS_IRQENABLE_CLR_2 0x004c 51 #define USBOTGSS_IRQSTATUS_RAW_3 0x0050 52 #define USBOTGSS_IRQSTATUS_3 0x0054 53 #define USBOTGSS_IRQENABLE_SET_3 0x0058 54 #define USBOTGSS_IRQENABLE_CLR_3 0x005c 55 #define USBOTGSS_IRQSTATUS_EOI_MISC 0x0030 56 #define USBOTGSS_IRQSTATUS_RAW_MISC 0x0034 57 #define USBOTGSS_IRQSTATUS_MISC 0x0038 58 #define USBOTGSS_IRQENABLE_SET_MISC 0x003c 59 #define USBOTGSS_IRQENABLE_CLR_MISC 0x0040 60 #define USBOTGSS_IRQMISC_OFFSET 0x03fc 61 #define USBOTGSS_UTMI_OTG_CTRL 0x0080 62 #define USBOTGSS_UTMI_OTG_STATUS 0x0084 63 #define USBOTGSS_UTMI_OTG_OFFSET 0x0480 64 #define USBOTGSS_TXFIFO_DEPTH 0x0508 65 #define USBOTGSS_RXFIFO_DEPTH 0x050c 66 #define USBOTGSS_MMRAM_OFFSET 0x0100 67 #define USBOTGSS_FLADJ 0x0104 68 #define USBOTGSS_DEBUG_CFG 0x0108 69 #define USBOTGSS_DEBUG_DATA 0x010c 70 #define USBOTGSS_DEV_EBC_EN 0x0110 71 #define USBOTGSS_DEBUG_OFFSET 0x0600 72 73 /* SYSCONFIG REGISTER */ 74 #define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16) 75 76 /* IRQ_EOI REGISTER */ 77 #define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0) 78 79 /* IRQS0 BITS */ 80 #define USBOTGSS_IRQO_COREIRQ_ST (1 << 0) 81 82 /* IRQMISC BITS */ 83 #define USBOTGSS_IRQMISC_DMADISABLECLR (1 << 17) 84 #define USBOTGSS_IRQMISC_OEVT (1 << 16) 85 #define USBOTGSS_IRQMISC_DRVVBUS_RISE (1 << 13) 86 #define USBOTGSS_IRQMISC_CHRGVBUS_RISE (1 << 12) 87 #define USBOTGSS_IRQMISC_DISCHRGVBUS_RISE (1 << 11) 88 #define USBOTGSS_IRQMISC_IDPULLUP_RISE (1 << 8) 89 #define USBOTGSS_IRQMISC_DRVVBUS_FALL (1 << 5) 90 #define USBOTGSS_IRQMISC_CHRGVBUS_FALL (1 << 4) 91 #define USBOTGSS_IRQMISC_DISCHRGVBUS_FALL (1 << 3) 92 #define USBOTGSS_IRQMISC_IDPULLUP_FALL (1 << 0) 93 94 #define USBOTGSS_INTERRUPTS (USBOTGSS_IRQMISC_OEVT | \ 95 USBOTGSS_IRQMISC_DRVVBUS_RISE | \ 96 USBOTGSS_IRQMISC_CHRGVBUS_RISE | \ 97 USBOTGSS_IRQMISC_DISCHRGVBUS_RISE | \ 98 USBOTGSS_IRQMISC_IDPULLUP_RISE | \ 99 USBOTGSS_IRQMISC_DRVVBUS_FALL | \ 100 USBOTGSS_IRQMISC_CHRGVBUS_FALL | \ 101 USBOTGSS_IRQMISC_DISCHRGVBUS_FALL | \ 102 USBOTGSS_IRQMISC_IDPULLUP_FALL) 103 104 /* UTMI_OTG_CTRL REGISTER */ 105 #define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5) 106 #define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4) 107 #define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3) 108 #define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0) 109 110 /* UTMI_OTG_STATUS REGISTER */ 111 #define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31) 112 #define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9) 113 #define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8) 114 #define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4) 115 #define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3) 116 #define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2) 117 #define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1) 118 119 struct dwc3_omap { 120 struct device *dev; 121 122 void __iomem *base; 123 124 u32 utmi_otg_status; 125 u32 utmi_otg_offset; 126 u32 irqmisc_offset; 127 u32 irq_eoi_offset; 128 u32 debug_offset; 129 u32 irq0_offset; 130 131 u32 dma_status:1; 132 struct list_head list; 133 u32 index; 134 }; 135 136 static LIST_HEAD(dwc3_omap_list); 137 138 static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) 139 { 140 return readl(base + offset); 141 } 142 143 static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value) 144 { 145 writel(value, base + offset); 146 } 147 148 static u32 dwc3_omap_read_utmi_status(struct dwc3_omap *omap) 149 { 150 return dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS + 151 omap->utmi_otg_offset); 152 } 153 154 static void dwc3_omap_write_utmi_status(struct dwc3_omap *omap, u32 value) 155 { 156 dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS + 157 omap->utmi_otg_offset, value); 158 159 } 160 161 static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap) 162 { 163 return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 - 164 omap->irq0_offset); 165 } 166 167 static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value) 168 { 169 dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0 - 170 omap->irq0_offset, value); 171 172 } 173 174 static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap) 175 { 176 return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC + 177 omap->irqmisc_offset); 178 } 179 180 static void dwc3_omap_write_irqmisc_status(struct dwc3_omap *omap, u32 value) 181 { 182 dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_MISC + 183 omap->irqmisc_offset, value); 184 185 } 186 187 static void dwc3_omap_write_irqmisc_set(struct dwc3_omap *omap, u32 value) 188 { 189 dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_MISC + 190 omap->irqmisc_offset, value); 191 192 } 193 194 static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value) 195 { 196 dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0 - 197 omap->irq0_offset, value); 198 } 199 200 static void dwc3_omap_write_irqmisc_clr(struct dwc3_omap *omap, u32 value) 201 { 202 dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_MISC + 203 omap->irqmisc_offset, value); 204 } 205 206 static void dwc3_omap_write_irq0_clr(struct dwc3_omap *omap, u32 value) 207 { 208 dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_CLR_0 - 209 omap->irq0_offset, value); 210 } 211 212 static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, 213 enum omap_dwc3_vbus_id_status status) 214 { 215 u32 val; 216 217 switch (status) { 218 case OMAP_DWC3_ID_GROUND: 219 dev_dbg(omap->dev, "ID GND\n"); 220 221 val = dwc3_omap_read_utmi_status(omap); 222 val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG 223 | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID 224 | USBOTGSS_UTMI_OTG_STATUS_SESSEND); 225 val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID 226 | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; 227 dwc3_omap_write_utmi_status(omap, val); 228 break; 229 230 case OMAP_DWC3_VBUS_VALID: 231 dev_dbg(omap->dev, "VBUS Connect\n"); 232 233 val = dwc3_omap_read_utmi_status(omap); 234 val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND; 235 val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG 236 | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID 237 | USBOTGSS_UTMI_OTG_STATUS_SESSVALID 238 | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; 239 dwc3_omap_write_utmi_status(omap, val); 240 break; 241 242 case OMAP_DWC3_ID_FLOAT: 243 case OMAP_DWC3_VBUS_OFF: 244 dev_dbg(omap->dev, "VBUS Disconnect\n"); 245 246 val = dwc3_omap_read_utmi_status(omap); 247 val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID 248 | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID 249 | USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT); 250 val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND 251 | USBOTGSS_UTMI_OTG_STATUS_IDDIG; 252 dwc3_omap_write_utmi_status(omap, val); 253 break; 254 255 default: 256 dev_dbg(omap->dev, "invalid state\n"); 257 } 258 } 259 260 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) 261 { 262 struct dwc3_omap *omap = _omap; 263 u32 reg; 264 265 reg = dwc3_omap_read_irqmisc_status(omap); 266 267 if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) { 268 dev_dbg(omap->dev, "DMA Disable was Cleared\n"); 269 omap->dma_status = false; 270 } 271 272 if (reg & USBOTGSS_IRQMISC_OEVT) 273 dev_dbg(omap->dev, "OTG Event\n"); 274 275 if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE) 276 dev_dbg(omap->dev, "DRVVBUS Rise\n"); 277 278 if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE) 279 dev_dbg(omap->dev, "CHRGVBUS Rise\n"); 280 281 if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE) 282 dev_dbg(omap->dev, "DISCHRGVBUS Rise\n"); 283 284 if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE) 285 dev_dbg(omap->dev, "IDPULLUP Rise\n"); 286 287 if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL) 288 dev_dbg(omap->dev, "DRVVBUS Fall\n"); 289 290 if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL) 291 dev_dbg(omap->dev, "CHRGVBUS Fall\n"); 292 293 if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL) 294 dev_dbg(omap->dev, "DISCHRGVBUS Fall\n"); 295 296 if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL) 297 dev_dbg(omap->dev, "IDPULLUP Fall\n"); 298 299 dwc3_omap_write_irqmisc_status(omap, reg); 300 301 reg = dwc3_omap_read_irq0_status(omap); 302 303 dwc3_omap_write_irq0_status(omap, reg); 304 305 return IRQ_HANDLED; 306 } 307 308 static void dwc3_omap_enable_irqs(struct dwc3_omap *omap) 309 { 310 /* enable all IRQs */ 311 dwc3_omap_write_irq0_set(omap, USBOTGSS_IRQO_COREIRQ_ST); 312 313 dwc3_omap_write_irqmisc_set(omap, USBOTGSS_INTERRUPTS); 314 } 315 316 static void dwc3_omap_disable_irqs(struct dwc3_omap *omap) 317 { 318 /* disable all IRQs */ 319 dwc3_omap_write_irq0_clr(omap, USBOTGSS_IRQO_COREIRQ_ST); 320 321 dwc3_omap_write_irqmisc_clr(omap, USBOTGSS_INTERRUPTS); 322 } 323 324 static void dwc3_omap_map_offset(struct dwc3_omap *omap) 325 { 326 /* 327 * Differentiate between OMAP5 and AM437x. 328 * 329 * For OMAP5(ES2.0) and AM437x wrapper revision is same, even 330 * though there are changes in wrapper register offsets. 331 * 332 * Using dt compatible to differentiate AM437x. 333 */ 334 #ifdef CONFIG_AM43XX 335 omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET; 336 omap->irq0_offset = USBOTGSS_IRQ0_OFFSET; 337 omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET; 338 omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET; 339 omap->debug_offset = USBOTGSS_DEBUG_OFFSET; 340 #endif 341 } 342 343 static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap, int utmi_mode) 344 { 345 u32 reg; 346 347 reg = dwc3_omap_read_utmi_status(omap); 348 349 switch (utmi_mode) { 350 case DWC3_OMAP_UTMI_MODE_SW: 351 reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; 352 break; 353 case DWC3_OMAP_UTMI_MODE_HW: 354 reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE; 355 break; 356 default: 357 dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode); 358 } 359 360 dwc3_omap_write_utmi_status(omap, reg); 361 } 362 363 /** 364 * dwc3_omap_uboot_init - dwc3 omap uboot initialization code 365 * @dev: struct dwc3_omap_device containing initialization data 366 * 367 * Entry point for dwc3 omap driver (equivalent to dwc3_omap_probe in linux 368 * kernel driver). Pointer to dwc3_omap_device should be passed containing 369 * base address and other initialization data. Returns '0' on success and 370 * a negative value on failure. 371 * 372 * Generally called from board_usb_init() implemented in board file. 373 */ 374 int dwc3_omap_uboot_init(struct dwc3_omap_device *omap_dev) 375 { 376 u32 reg; 377 struct device *dev = NULL; 378 struct dwc3_omap *omap; 379 380 omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL); 381 if (!omap) 382 return -ENOMEM; 383 384 omap->base = omap_dev->base; 385 omap->index = omap_dev->index; 386 387 dwc3_omap_map_offset(omap); 388 dwc3_omap_set_utmi_mode(omap, omap_dev->utmi_mode); 389 390 /* check the DMA Status */ 391 reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); 392 omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE); 393 394 dwc3_omap_set_mailbox(omap, omap_dev->vbus_id_status); 395 396 dwc3_omap_enable_irqs(omap); 397 list_add_tail(&omap->list, &dwc3_omap_list); 398 399 return 0; 400 } 401 402 /** 403 * dwc3_omap_uboot_exit - dwc3 omap uboot cleanup code 404 * @index: index of this controller 405 * 406 * Performs cleanup of memory allocated in dwc3_omap_uboot_init 407 * (equivalent to dwc3_omap_remove in linux). index of _this_ controller 408 * should be passed and should match with the index passed in 409 * dwc3_omap_device during init. 410 * 411 * Generally called from board file. 412 */ 413 void dwc3_omap_uboot_exit(int index) 414 { 415 struct dwc3_omap *omap = NULL; 416 417 list_for_each_entry(omap, &dwc3_omap_list, list) { 418 if (omap->index != index) 419 continue; 420 421 dwc3_omap_disable_irqs(omap); 422 list_del(&omap->list); 423 kfree(omap); 424 break; 425 } 426 } 427 428 /** 429 * dwc3_omap_uboot_interrupt_status - check the status of interrupt 430 * @index: index of this controller 431 * 432 * Checks the status of interrupts and returns true if an interrupt 433 * is detected or false otherwise. 434 * 435 * Generally called from board file. 436 */ 437 int dwc3_omap_uboot_interrupt_status(int index) 438 { 439 struct dwc3_omap *omap = NULL; 440 441 list_for_each_entry(omap, &dwc3_omap_list, list) 442 if (omap->index == index) 443 return dwc3_omap_interrupt(-1, omap); 444 445 return 0; 446 } 447 448 MODULE_ALIAS("platform:omap-dwc3"); 449 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 450 MODULE_LICENSE("GPL v2"); 451 MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer"); 452