1 /** 2 * core.c - DesignWare USB3 DRD Controller Core file 3 * 4 * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com 5 * 6 * Authors: Felipe Balbi <balbi@ti.com>, 7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de> 8 * 9 * Taken from Linux Kernel v3.19-rc1 (drivers/usb/dwc3/core.c) and ported 10 * to uboot. 11 * 12 * commit cd72f890d2 : usb: dwc3: core: enable phy suspend quirk on non-FPGA 13 * 14 * SPDX-License-Identifier: GPL-2.0 15 */ 16 17 #include <common.h> 18 #include <malloc.h> 19 #include <dwc3-uboot.h> 20 #include <asm/dma-mapping.h> 21 #include <linux/ioport.h> 22 23 #include <linux/usb/ch9.h> 24 #include <linux/usb/gadget.h> 25 26 #include "core.h" 27 #include "gadget.h" 28 #include "io.h" 29 30 #include "linux-compat.h" 31 32 static LIST_HEAD(dwc3_list); 33 /* -------------------------------------------------------------------------- */ 34 35 static void dwc3_set_mode(struct dwc3 *dwc, u32 mode) 36 { 37 u32 reg; 38 39 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 40 reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)); 41 reg |= DWC3_GCTL_PRTCAPDIR(mode); 42 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 43 } 44 45 /** 46 * dwc3_core_soft_reset - Issues core soft reset and PHY reset 47 * @dwc: pointer to our context structure 48 */ 49 static int dwc3_core_soft_reset(struct dwc3 *dwc) 50 { 51 u32 reg; 52 53 /* Before Resetting PHY, put Core in Reset */ 54 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 55 reg |= DWC3_GCTL_CORESOFTRESET; 56 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 57 58 /* Assert USB3 PHY reset */ 59 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); 60 reg |= DWC3_GUSB3PIPECTL_PHYSOFTRST; 61 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); 62 63 /* Assert USB2 PHY reset */ 64 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); 65 reg |= DWC3_GUSB2PHYCFG_PHYSOFTRST; 66 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 67 68 mdelay(100); 69 70 /* Clear USB3 PHY reset */ 71 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); 72 reg &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; 73 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); 74 75 /* Clear USB2 PHY reset */ 76 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); 77 reg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; 78 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 79 80 mdelay(100); 81 82 /* After PHYs are stable we can take Core out of reset state */ 83 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 84 reg &= ~DWC3_GCTL_CORESOFTRESET; 85 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 86 87 return 0; 88 } 89 90 /** 91 * dwc3_free_one_event_buffer - Frees one event buffer 92 * @dwc: Pointer to our controller context structure 93 * @evt: Pointer to event buffer to be freed 94 */ 95 static void dwc3_free_one_event_buffer(struct dwc3 *dwc, 96 struct dwc3_event_buffer *evt) 97 { 98 dma_free_coherent(evt->buf); 99 } 100 101 /** 102 * dwc3_alloc_one_event_buffer - Allocates one event buffer structure 103 * @dwc: Pointer to our controller context structure 104 * @length: size of the event buffer 105 * 106 * Returns a pointer to the allocated event buffer structure on success 107 * otherwise ERR_PTR(errno). 108 */ 109 static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc, 110 unsigned length) 111 { 112 struct dwc3_event_buffer *evt; 113 114 evt = devm_kzalloc(dwc->dev, sizeof(*evt), GFP_KERNEL); 115 if (!evt) 116 return ERR_PTR(-ENOMEM); 117 118 evt->dwc = dwc; 119 evt->length = length; 120 evt->buf = dma_alloc_coherent(length, 121 (unsigned long *)&evt->dma); 122 if (!evt->buf) 123 return ERR_PTR(-ENOMEM); 124 125 return evt; 126 } 127 128 /** 129 * dwc3_free_event_buffers - frees all allocated event buffers 130 * @dwc: Pointer to our controller context structure 131 */ 132 static void dwc3_free_event_buffers(struct dwc3 *dwc) 133 { 134 struct dwc3_event_buffer *evt; 135 int i; 136 137 for (i = 0; i < dwc->num_event_buffers; i++) { 138 evt = dwc->ev_buffs[i]; 139 if (evt) 140 dwc3_free_one_event_buffer(dwc, evt); 141 } 142 } 143 144 /** 145 * dwc3_alloc_event_buffers - Allocates @num event buffers of size @length 146 * @dwc: pointer to our controller context structure 147 * @length: size of event buffer 148 * 149 * Returns 0 on success otherwise negative errno. In the error case, dwc 150 * may contain some buffers allocated but not all which were requested. 151 */ 152 static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length) 153 { 154 int num; 155 int i; 156 157 num = DWC3_NUM_INT(dwc->hwparams.hwparams1); 158 dwc->num_event_buffers = num; 159 160 dwc->ev_buffs = memalign(CONFIG_SYS_CACHELINE_SIZE, 161 sizeof(*dwc->ev_buffs) * num); 162 if (!dwc->ev_buffs) 163 return -ENOMEM; 164 165 for (i = 0; i < num; i++) { 166 struct dwc3_event_buffer *evt; 167 168 evt = dwc3_alloc_one_event_buffer(dwc, length); 169 if (IS_ERR(evt)) { 170 dev_err(dwc->dev, "can't allocate event buffer\n"); 171 return PTR_ERR(evt); 172 } 173 dwc->ev_buffs[i] = evt; 174 } 175 176 return 0; 177 } 178 179 /** 180 * dwc3_event_buffers_setup - setup our allocated event buffers 181 * @dwc: pointer to our controller context structure 182 * 183 * Returns 0 on success otherwise negative errno. 184 */ 185 static int dwc3_event_buffers_setup(struct dwc3 *dwc) 186 { 187 struct dwc3_event_buffer *evt; 188 int n; 189 190 for (n = 0; n < dwc->num_event_buffers; n++) { 191 evt = dwc->ev_buffs[n]; 192 dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n", 193 evt->buf, (unsigned long long) evt->dma, 194 evt->length); 195 196 evt->lpos = 0; 197 198 dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 199 lower_32_bits(evt->dma)); 200 dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 201 upper_32_bits(evt->dma)); 202 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), 203 DWC3_GEVNTSIZ_SIZE(evt->length)); 204 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); 205 } 206 207 return 0; 208 } 209 210 static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) 211 { 212 struct dwc3_event_buffer *evt; 213 int n; 214 215 for (n = 0; n < dwc->num_event_buffers; n++) { 216 evt = dwc->ev_buffs[n]; 217 218 evt->lpos = 0; 219 220 dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(n), 0); 221 dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(n), 0); 222 dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(n), DWC3_GEVNTSIZ_INTMASK 223 | DWC3_GEVNTSIZ_SIZE(0)); 224 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(n), 0); 225 } 226 } 227 228 static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) 229 { 230 if (!dwc->has_hibernation) 231 return 0; 232 233 if (!dwc->nr_scratch) 234 return 0; 235 236 dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, 237 DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); 238 if (!dwc->scratchbuf) 239 return -ENOMEM; 240 241 return 0; 242 } 243 244 static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) 245 { 246 dma_addr_t scratch_addr; 247 u32 param; 248 int ret; 249 250 if (!dwc->has_hibernation) 251 return 0; 252 253 if (!dwc->nr_scratch) 254 return 0; 255 256 scratch_addr = dma_map_single(dwc->scratchbuf, 257 dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, 258 DMA_BIDIRECTIONAL); 259 if (dma_mapping_error(dwc->dev, scratch_addr)) { 260 dev_err(dwc->dev, "failed to map scratch buffer\n"); 261 ret = -EFAULT; 262 goto err0; 263 } 264 265 dwc->scratch_addr = scratch_addr; 266 267 param = lower_32_bits(scratch_addr); 268 269 ret = dwc3_send_gadget_generic_command(dwc, 270 DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); 271 if (ret < 0) 272 goto err1; 273 274 param = upper_32_bits(scratch_addr); 275 276 ret = dwc3_send_gadget_generic_command(dwc, 277 DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); 278 if (ret < 0) 279 goto err1; 280 281 return 0; 282 283 err1: 284 dma_unmap_single((void *)(uintptr_t)dwc->scratch_addr, dwc->nr_scratch * 285 DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); 286 287 err0: 288 return ret; 289 } 290 291 static void dwc3_free_scratch_buffers(struct dwc3 *dwc) 292 { 293 if (!dwc->has_hibernation) 294 return; 295 296 if (!dwc->nr_scratch) 297 return; 298 299 dma_unmap_single((void *)(uintptr_t)dwc->scratch_addr, dwc->nr_scratch * 300 DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); 301 kfree(dwc->scratchbuf); 302 } 303 304 static void dwc3_core_num_eps(struct dwc3 *dwc) 305 { 306 struct dwc3_hwparams *parms = &dwc->hwparams; 307 308 dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); 309 dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; 310 311 dev_vdbg(dwc->dev, "found %d IN and %d OUT endpoints\n", 312 dwc->num_in_eps, dwc->num_out_eps); 313 } 314 315 static void dwc3_cache_hwparams(struct dwc3 *dwc) 316 { 317 struct dwc3_hwparams *parms = &dwc->hwparams; 318 319 parms->hwparams0 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS0); 320 parms->hwparams1 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS1); 321 parms->hwparams2 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS2); 322 parms->hwparams3 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS3); 323 parms->hwparams4 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS4); 324 parms->hwparams5 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS5); 325 parms->hwparams6 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS6); 326 parms->hwparams7 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS7); 327 parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8); 328 } 329 330 /** 331 * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core 332 * @dwc: Pointer to our controller context structure 333 */ 334 static void dwc3_phy_setup(struct dwc3 *dwc) 335 { 336 u32 reg; 337 338 reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); 339 340 /* 341 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY 342 * to '0' during coreConsultant configuration. So default value 343 * will be '0' when the core is reset. Application needs to set it 344 * to '1' after the core initialization is completed. 345 */ 346 if (dwc->revision > DWC3_REVISION_194A) 347 reg |= DWC3_GUSB3PIPECTL_SUSPHY; 348 349 if (dwc->u2ss_inp3_quirk) 350 reg |= DWC3_GUSB3PIPECTL_U2SSINP3OK; 351 352 if (dwc->req_p1p2p3_quirk) 353 reg |= DWC3_GUSB3PIPECTL_REQP1P2P3; 354 355 if (dwc->del_p1p2p3_quirk) 356 reg |= DWC3_GUSB3PIPECTL_DEP1P2P3_EN; 357 358 if (dwc->del_phy_power_chg_quirk) 359 reg |= DWC3_GUSB3PIPECTL_DEPOCHANGE; 360 361 if (dwc->lfps_filter_quirk) 362 reg |= DWC3_GUSB3PIPECTL_LFPSFILT; 363 364 if (dwc->rx_detect_poll_quirk) 365 reg |= DWC3_GUSB3PIPECTL_RX_DETOPOLL; 366 367 if (dwc->tx_de_emphasis_quirk) 368 reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); 369 370 if (dwc->dis_u3_susphy_quirk) 371 reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; 372 373 dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); 374 375 mdelay(100); 376 377 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); 378 379 /* 380 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to 381 * '0' during coreConsultant configuration. So default value will 382 * be '0' when the core is reset. Application needs to set it to 383 * '1' after the core initialization is completed. 384 */ 385 if (dwc->revision > DWC3_REVISION_194A) 386 reg |= DWC3_GUSB2PHYCFG_SUSPHY; 387 388 if (dwc->dis_u2_susphy_quirk) 389 reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; 390 391 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); 392 393 mdelay(100); 394 } 395 396 /** 397 * dwc3_core_init - Low-level initialization of DWC3 Core 398 * @dwc: Pointer to our controller context structure 399 * 400 * Returns 0 on success otherwise negative errno. 401 */ 402 static int dwc3_core_init(struct dwc3 *dwc) 403 { 404 unsigned long timeout; 405 u32 hwparams4 = dwc->hwparams.hwparams4; 406 u32 reg; 407 int ret; 408 409 reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); 410 /* This should read as U3 followed by revision number */ 411 if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) { 412 dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); 413 ret = -ENODEV; 414 goto err0; 415 } 416 dwc->revision = reg; 417 418 /* Handle USB2.0-only core configuration */ 419 if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == 420 DWC3_GHWPARAMS3_SSPHY_IFC_DIS) { 421 if (dwc->maximum_speed == USB_SPEED_SUPER) 422 dwc->maximum_speed = USB_SPEED_HIGH; 423 } 424 425 /* issue device SoftReset too */ 426 timeout = 5000; 427 dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST); 428 while (timeout--) { 429 reg = dwc3_readl(dwc->regs, DWC3_DCTL); 430 if (!(reg & DWC3_DCTL_CSFTRST)) 431 break; 432 }; 433 434 if (!timeout) { 435 dev_err(dwc->dev, "Reset Timed Out\n"); 436 ret = -ETIMEDOUT; 437 goto err0; 438 } 439 440 ret = dwc3_core_soft_reset(dwc); 441 if (ret) 442 goto err0; 443 444 reg = dwc3_readl(dwc->regs, DWC3_GCTL); 445 reg &= ~DWC3_GCTL_SCALEDOWN_MASK; 446 447 switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { 448 case DWC3_GHWPARAMS1_EN_PWROPT_CLK: 449 /** 450 * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an 451 * issue which would cause xHCI compliance tests to fail. 452 * 453 * Because of that we cannot enable clock gating on such 454 * configurations. 455 * 456 * Refers to: 457 * 458 * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based 459 * SOF/ITP Mode Used 460 */ 461 if ((dwc->dr_mode == USB_DR_MODE_HOST || 462 dwc->dr_mode == USB_DR_MODE_OTG) && 463 (dwc->revision >= DWC3_REVISION_210A && 464 dwc->revision <= DWC3_REVISION_250A)) 465 reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; 466 else 467 reg &= ~DWC3_GCTL_DSBLCLKGTNG; 468 break; 469 case DWC3_GHWPARAMS1_EN_PWROPT_HIB: 470 /* enable hibernation here */ 471 dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); 472 473 /* 474 * REVISIT Enabling this bit so that host-mode hibernation 475 * will work. Device-mode hibernation is not yet implemented. 476 */ 477 reg |= DWC3_GCTL_GBLHIBERNATIONEN; 478 break; 479 default: 480 dev_dbg(dwc->dev, "No power optimization available\n"); 481 } 482 483 /* check if current dwc3 is on simulation board */ 484 if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { 485 dev_dbg(dwc->dev, "it is on FPGA board\n"); 486 dwc->is_fpga = true; 487 } 488 489 if(dwc->disable_scramble_quirk && !dwc->is_fpga) 490 WARN(true, 491 "disable_scramble cannot be used on non-FPGA builds\n"); 492 493 if (dwc->disable_scramble_quirk && dwc->is_fpga) 494 reg |= DWC3_GCTL_DISSCRAMBLE; 495 else 496 reg &= ~DWC3_GCTL_DISSCRAMBLE; 497 498 if (dwc->u2exit_lfps_quirk) 499 reg |= DWC3_GCTL_U2EXIT_LFPS; 500 501 /* 502 * WORKAROUND: DWC3 revisions <1.90a have a bug 503 * where the device can fail to connect at SuperSpeed 504 * and falls back to high-speed mode which causes 505 * the device to enter a Connect/Disconnect loop 506 */ 507 if (dwc->revision < DWC3_REVISION_190A) 508 reg |= DWC3_GCTL_U2RSTECN; 509 510 dwc3_core_num_eps(dwc); 511 512 dwc3_writel(dwc->regs, DWC3_GCTL, reg); 513 514 dwc3_phy_setup(dwc); 515 516 ret = dwc3_alloc_scratch_buffers(dwc); 517 if (ret) 518 goto err0; 519 520 ret = dwc3_setup_scratch_buffers(dwc); 521 if (ret) 522 goto err1; 523 524 return 0; 525 526 err1: 527 dwc3_free_scratch_buffers(dwc); 528 529 err0: 530 return ret; 531 } 532 533 static void dwc3_core_exit(struct dwc3 *dwc) 534 { 535 dwc3_free_scratch_buffers(dwc); 536 } 537 538 static int dwc3_core_init_mode(struct dwc3 *dwc) 539 { 540 int ret; 541 542 switch (dwc->dr_mode) { 543 case USB_DR_MODE_PERIPHERAL: 544 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); 545 ret = dwc3_gadget_init(dwc); 546 if (ret) { 547 dev_err(dev, "failed to initialize gadget\n"); 548 return ret; 549 } 550 break; 551 case USB_DR_MODE_HOST: 552 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); 553 ret = dwc3_host_init(dwc); 554 if (ret) { 555 dev_err(dev, "failed to initialize host\n"); 556 return ret; 557 } 558 break; 559 case USB_DR_MODE_OTG: 560 dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); 561 ret = dwc3_host_init(dwc); 562 if (ret) { 563 dev_err(dev, "failed to initialize host\n"); 564 return ret; 565 } 566 567 ret = dwc3_gadget_init(dwc); 568 if (ret) { 569 dev_err(dev, "failed to initialize gadget\n"); 570 return ret; 571 } 572 break; 573 default: 574 dev_err(dev, "Unsupported mode of operation %d\n", dwc->dr_mode); 575 return -EINVAL; 576 } 577 578 return 0; 579 } 580 581 static void dwc3_core_exit_mode(struct dwc3 *dwc) 582 { 583 switch (dwc->dr_mode) { 584 case USB_DR_MODE_PERIPHERAL: 585 dwc3_gadget_exit(dwc); 586 break; 587 case USB_DR_MODE_HOST: 588 dwc3_host_exit(dwc); 589 break; 590 case USB_DR_MODE_OTG: 591 dwc3_host_exit(dwc); 592 dwc3_gadget_exit(dwc); 593 break; 594 default: 595 /* do nothing */ 596 break; 597 } 598 } 599 600 #define DWC3_ALIGN_MASK (16 - 1) 601 602 /** 603 * dwc3_uboot_init - dwc3 core uboot initialization code 604 * @dwc3_dev: struct dwc3_device containing initialization data 605 * 606 * Entry point for dwc3 driver (equivalent to dwc3_probe in linux 607 * kernel driver). Pointer to dwc3_device should be passed containing 608 * base address and other initialization data. Returns '0' on success and 609 * a negative value on failure. 610 * 611 * Generally called from board_usb_init() implemented in board file. 612 */ 613 int dwc3_uboot_init(struct dwc3_device *dwc3_dev) 614 { 615 struct dwc3 *dwc; 616 struct device *dev; 617 u8 lpm_nyet_threshold; 618 u8 tx_de_emphasis; 619 u8 hird_threshold; 620 621 int ret; 622 623 void *mem; 624 625 mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL); 626 if (!mem) 627 return -ENOMEM; 628 629 dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1); 630 dwc->mem = mem; 631 632 dwc->regs = (void *)(uintptr_t)(dwc3_dev->base + 633 DWC3_GLOBALS_REGS_START); 634 635 /* default to highest possible threshold */ 636 lpm_nyet_threshold = 0xff; 637 638 /* default to -3.5dB de-emphasis */ 639 tx_de_emphasis = 1; 640 641 /* 642 * default to assert utmi_sleep_n and use maximum allowed HIRD 643 * threshold value of 0b1100 644 */ 645 hird_threshold = 12; 646 647 dwc->maximum_speed = dwc3_dev->maximum_speed; 648 dwc->has_lpm_erratum = dwc3_dev->has_lpm_erratum; 649 if (dwc3_dev->lpm_nyet_threshold) 650 lpm_nyet_threshold = dwc3_dev->lpm_nyet_threshold; 651 dwc->is_utmi_l1_suspend = dwc3_dev->is_utmi_l1_suspend; 652 if (dwc3_dev->hird_threshold) 653 hird_threshold = dwc3_dev->hird_threshold; 654 655 dwc->needs_fifo_resize = dwc3_dev->tx_fifo_resize; 656 dwc->dr_mode = dwc3_dev->dr_mode; 657 658 dwc->disable_scramble_quirk = dwc3_dev->disable_scramble_quirk; 659 dwc->u2exit_lfps_quirk = dwc3_dev->u2exit_lfps_quirk; 660 dwc->u2ss_inp3_quirk = dwc3_dev->u2ss_inp3_quirk; 661 dwc->req_p1p2p3_quirk = dwc3_dev->req_p1p2p3_quirk; 662 dwc->del_p1p2p3_quirk = dwc3_dev->del_p1p2p3_quirk; 663 dwc->del_phy_power_chg_quirk = dwc3_dev->del_phy_power_chg_quirk; 664 dwc->lfps_filter_quirk = dwc3_dev->lfps_filter_quirk; 665 dwc->rx_detect_poll_quirk = dwc3_dev->rx_detect_poll_quirk; 666 dwc->dis_u3_susphy_quirk = dwc3_dev->dis_u3_susphy_quirk; 667 dwc->dis_u2_susphy_quirk = dwc3_dev->dis_u2_susphy_quirk; 668 669 dwc->tx_de_emphasis_quirk = dwc3_dev->tx_de_emphasis_quirk; 670 if (dwc3_dev->tx_de_emphasis) 671 tx_de_emphasis = dwc3_dev->tx_de_emphasis; 672 673 /* default to superspeed if no maximum_speed passed */ 674 if (dwc->maximum_speed == USB_SPEED_UNKNOWN) 675 dwc->maximum_speed = USB_SPEED_SUPER; 676 677 dwc->lpm_nyet_threshold = lpm_nyet_threshold; 678 dwc->tx_de_emphasis = tx_de_emphasis; 679 680 dwc->hird_threshold = hird_threshold 681 | (dwc->is_utmi_l1_suspend << 4); 682 683 dwc->index = dwc3_dev->index; 684 685 dwc3_cache_hwparams(dwc); 686 687 ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE); 688 if (ret) { 689 dev_err(dwc->dev, "failed to allocate event buffers\n"); 690 return -ENOMEM; 691 } 692 693 if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) 694 dwc->dr_mode = USB_DR_MODE_HOST; 695 else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) 696 dwc->dr_mode = USB_DR_MODE_PERIPHERAL; 697 698 if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) 699 dwc->dr_mode = USB_DR_MODE_OTG; 700 701 ret = dwc3_core_init(dwc); 702 if (ret) { 703 dev_err(dev, "failed to initialize core\n"); 704 goto err0; 705 } 706 707 ret = dwc3_event_buffers_setup(dwc); 708 if (ret) { 709 dev_err(dwc->dev, "failed to setup event buffers\n"); 710 goto err1; 711 } 712 713 ret = dwc3_core_init_mode(dwc); 714 if (ret) 715 goto err2; 716 717 list_add_tail(&dwc->list, &dwc3_list); 718 719 return 0; 720 721 err2: 722 dwc3_event_buffers_cleanup(dwc); 723 724 err1: 725 dwc3_core_exit(dwc); 726 727 err0: 728 dwc3_free_event_buffers(dwc); 729 730 return ret; 731 } 732 733 /** 734 * dwc3_uboot_exit - dwc3 core uboot cleanup code 735 * @index: index of this controller 736 * 737 * Performs cleanup of memory allocated in dwc3_uboot_init and other misc 738 * cleanups (equivalent to dwc3_remove in linux). index of _this_ controller 739 * should be passed and should match with the index passed in 740 * dwc3_device during init. 741 * 742 * Generally called from board file. 743 */ 744 void dwc3_uboot_exit(int index) 745 { 746 struct dwc3 *dwc; 747 748 list_for_each_entry(dwc, &dwc3_list, list) { 749 if (dwc->index != index) 750 continue; 751 752 dwc3_core_exit_mode(dwc); 753 dwc3_event_buffers_cleanup(dwc); 754 dwc3_free_event_buffers(dwc); 755 dwc3_core_exit(dwc); 756 list_del(&dwc->list); 757 kfree(dwc->mem); 758 break; 759 } 760 } 761 762 /** 763 * dwc3_uboot_handle_interrupt - handle dwc3 core interrupt 764 * @index: index of this controller 765 * 766 * Invokes dwc3 gadget interrupts. 767 * 768 * Generally called from board file. 769 */ 770 void dwc3_uboot_handle_interrupt(int index) 771 { 772 struct dwc3 *dwc = NULL; 773 774 list_for_each_entry(dwc, &dwc3_list, list) { 775 if (dwc->index != index) 776 continue; 777 778 dwc3_gadget_uboot_handle_interrupt(dwc); 779 break; 780 } 781 } 782 783 MODULE_ALIAS("platform:dwc3"); 784 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); 785 MODULE_LICENSE("GPL v2"); 786 MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); 787