1 /* 2 * Xilinx SPI driver 3 * 4 * Supports 8 bit SPI transfers only, with or w/o FIFO 5 * 6 * Based on bfin_spi.c, by way of altera_spi.c 7 * Copyright (c) 2015 Jagan Teki <jteki@openedev.com> 8 * Copyright (c) 2012 Stephan Linz <linz@li-pro.net> 9 * Copyright (c) 2010 Graeme Smecher <graeme.smecher@mail.mcgill.ca> 10 * Copyright (c) 2010 Thomas Chou <thomas@wytron.com.tw> 11 * Copyright (c) 2005-2008 Analog Devices Inc. 12 * 13 * SPDX-License-Identifier: GPL-2.0+ 14 */ 15 16 #include <config.h> 17 #include <common.h> 18 #include <dm.h> 19 #include <errno.h> 20 #include <malloc.h> 21 #include <spi.h> 22 #include <asm/io.h> 23 24 /* 25 * [0]: http://www.xilinx.com/support/documentation 26 * 27 * Xilinx SPI Register Definitions 28 * [1]: [0]/ip_documentation/xps_spi.pdf 29 * page 8, Register Descriptions 30 * [2]: [0]/ip_documentation/axi_spi_ds742.pdf 31 * page 7, Register Overview Table 32 */ 33 34 /* SPI Control Register (spicr), [1] p9, [2] p8 */ 35 #define SPICR_LSB_FIRST BIT(9) 36 #define SPICR_MASTER_INHIBIT BIT(8) 37 #define SPICR_MANUAL_SS BIT(7) 38 #define SPICR_RXFIFO_RESEST BIT(6) 39 #define SPICR_TXFIFO_RESEST BIT(5) 40 #define SPICR_CPHA BIT(4) 41 #define SPICR_CPOL BIT(3) 42 #define SPICR_MASTER_MODE BIT(2) 43 #define SPICR_SPE BIT(1) 44 #define SPICR_LOOP BIT(0) 45 46 /* SPI Status Register (spisr), [1] p11, [2] p10 */ 47 #define SPISR_SLAVE_MODE_SELECT BIT(5) 48 #define SPISR_MODF BIT(4) 49 #define SPISR_TX_FULL BIT(3) 50 #define SPISR_TX_EMPTY BIT(2) 51 #define SPISR_RX_FULL BIT(1) 52 #define SPISR_RX_EMPTY BIT(0) 53 54 /* SPI Data Transmit Register (spidtr), [1] p12, [2] p12 */ 55 #define SPIDTR_8BIT_MASK GENMASK(7, 0) 56 #define SPIDTR_16BIT_MASK GENMASK(15, 0) 57 #define SPIDTR_32BIT_MASK GENMASK(31, 0) 58 59 /* SPI Data Receive Register (spidrr), [1] p12, [2] p12 */ 60 #define SPIDRR_8BIT_MASK GENMASK(7, 0) 61 #define SPIDRR_16BIT_MASK GENMASK(15, 0) 62 #define SPIDRR_32BIT_MASK GENMASK(31, 0) 63 64 /* SPI Slave Select Register (spissr), [1] p13, [2] p13 */ 65 #define SPISSR_MASK(cs) (1 << (cs)) 66 #define SPISSR_ACT(cs) ~SPISSR_MASK(cs) 67 #define SPISSR_OFF ~0UL 68 69 /* SPI Software Reset Register (ssr) */ 70 #define SPISSR_RESET_VALUE 0x0a 71 72 #define XILSPI_MAX_XFER_BITS 8 73 #define XILSPI_SPICR_DFLT_ON (SPICR_MANUAL_SS | SPICR_MASTER_MODE | \ 74 SPICR_SPE) 75 #define XILSPI_SPICR_DFLT_OFF (SPICR_MASTER_INHIBIT | SPICR_MANUAL_SS) 76 77 #ifndef CONFIG_XILINX_SPI_IDLE_VAL 78 #define CONFIG_XILINX_SPI_IDLE_VAL GENMASK(7, 0) 79 #endif 80 81 #ifndef CONFIG_SYS_XILINX_SPI_LIST 82 #define CONFIG_SYS_XILINX_SPI_LIST { CONFIG_SYS_SPI_BASE } 83 #endif 84 85 /* xilinx spi register set */ 86 struct xilinx_spi_regs { 87 u32 __space0__[7]; 88 u32 dgier; /* Device Global Interrupt Enable Register (DGIER) */ 89 u32 ipisr; /* IP Interrupt Status Register (IPISR) */ 90 u32 __space1__; 91 u32 ipier; /* IP Interrupt Enable Register (IPIER) */ 92 u32 __space2__[5]; 93 u32 srr; /* Softare Reset Register (SRR) */ 94 u32 __space3__[7]; 95 u32 spicr; /* SPI Control Register (SPICR) */ 96 u32 spisr; /* SPI Status Register (SPISR) */ 97 u32 spidtr; /* SPI Data Transmit Register (SPIDTR) */ 98 u32 spidrr; /* SPI Data Receive Register (SPIDRR) */ 99 u32 spissr; /* SPI Slave Select Register (SPISSR) */ 100 u32 spitfor; /* SPI Transmit FIFO Occupancy Register (SPITFOR) */ 101 u32 spirfor; /* SPI Receive FIFO Occupancy Register (SPIRFOR) */ 102 }; 103 104 /* xilinx spi priv */ 105 struct xilinx_spi_priv { 106 struct xilinx_spi_regs *regs; 107 unsigned int freq; 108 unsigned int mode; 109 }; 110 111 static unsigned long xilinx_spi_base_list[] = CONFIG_SYS_XILINX_SPI_LIST; 112 static int xilinx_spi_probe(struct udevice *bus) 113 { 114 struct xilinx_spi_priv *priv = dev_get_priv(bus); 115 struct xilinx_spi_regs *regs = priv->regs; 116 117 priv->regs = (struct xilinx_spi_regs *)xilinx_spi_base_list[bus->seq]; 118 119 writel(SPISSR_RESET_VALUE, ®s->srr); 120 121 return 0; 122 } 123 124 static void spi_cs_activate(struct udevice *dev, uint cs) 125 { 126 struct udevice *bus = dev_get_parent(dev); 127 struct xilinx_spi_priv *priv = dev_get_priv(bus); 128 struct xilinx_spi_regs *regs = priv->regs; 129 130 writel(SPISSR_ACT(cs), ®s->spissr); 131 } 132 133 static void spi_cs_deactivate(struct udevice *dev) 134 { 135 struct udevice *bus = dev_get_parent(dev); 136 struct xilinx_spi_priv *priv = dev_get_priv(bus); 137 struct xilinx_spi_regs *regs = priv->regs; 138 139 writel(SPISSR_OFF, ®s->spissr); 140 } 141 142 static int xilinx_spi_claim_bus(struct udevice *dev) 143 { 144 struct udevice *bus = dev_get_parent(dev); 145 struct xilinx_spi_priv *priv = dev_get_priv(bus); 146 struct xilinx_spi_regs *regs = priv->regs; 147 148 writel(SPISSR_OFF, ®s->spissr); 149 writel(XILSPI_SPICR_DFLT_ON, ®s->spicr); 150 151 return 0; 152 } 153 154 static int xilinx_spi_release_bus(struct udevice *dev) 155 { 156 struct udevice *bus = dev_get_parent(dev); 157 struct xilinx_spi_priv *priv = dev_get_priv(bus); 158 struct xilinx_spi_regs *regs = priv->regs; 159 160 writel(SPISSR_OFF, ®s->spissr); 161 writel(XILSPI_SPICR_DFLT_OFF, ®s->spicr); 162 163 return 0; 164 } 165 166 static int xilinx_spi_xfer(struct udevice *dev, unsigned int bitlen, 167 const void *dout, void *din, unsigned long flags) 168 { 169 struct udevice *bus = dev_get_parent(dev); 170 struct xilinx_spi_priv *priv = dev_get_priv(bus); 171 struct xilinx_spi_regs *regs = priv->regs; 172 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); 173 /* assume spi core configured to do 8 bit transfers */ 174 unsigned int bytes = bitlen / XILSPI_MAX_XFER_BITS; 175 const unsigned char *txp = dout; 176 unsigned char *rxp = din; 177 unsigned rxecount = 17; /* max. 16 elements in FIFO, leftover 1 */ 178 unsigned global_timeout; 179 180 debug("spi_xfer: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", 181 bus->seq, slave_plat->cs, bitlen, bytes, flags); 182 183 if (bitlen == 0) 184 goto done; 185 186 if (bitlen % XILSPI_MAX_XFER_BITS) { 187 printf("XILSPI warning: Not a multiple of %d bits\n", 188 XILSPI_MAX_XFER_BITS); 189 flags |= SPI_XFER_END; 190 goto done; 191 } 192 193 /* empty read buffer */ 194 while (rxecount && !(readl(®s->spisr) & SPISR_RX_EMPTY)) { 195 readl(®s->spidrr); 196 rxecount--; 197 } 198 199 if (!rxecount) { 200 printf("XILSPI error: Rx buffer not empty\n"); 201 return -1; 202 } 203 204 if (flags & SPI_XFER_BEGIN) 205 spi_cs_activate(dev, slave_plat->cs); 206 207 /* at least 1usec or greater, leftover 1 */ 208 global_timeout = priv->freq > XILSPI_MAX_XFER_BITS * 1000000 ? 2 : 209 (XILSPI_MAX_XFER_BITS * 1000000 / priv->freq) + 1; 210 211 while (bytes--) { 212 unsigned timeout = global_timeout; 213 /* get Tx element from data out buffer and count up */ 214 unsigned char d = txp ? *txp++ : CONFIG_XILINX_SPI_IDLE_VAL; 215 debug("spi_xfer: tx:%x ", d); 216 217 /* write out and wait for processing (receive data) */ 218 writel(d & SPIDTR_8BIT_MASK, ®s->spidtr); 219 while (timeout && readl(®s->spisr) 220 & SPISR_RX_EMPTY) { 221 timeout--; 222 udelay(1); 223 } 224 225 if (!timeout) { 226 printf("XILSPI error: Xfer timeout\n"); 227 return -1; 228 } 229 230 /* read Rx element and push into data in buffer */ 231 d = readl(®s->spidrr) & SPIDRR_8BIT_MASK; 232 if (rxp) 233 *rxp++ = d; 234 debug("spi_xfer: rx:%x\n", d); 235 } 236 237 done: 238 if (flags & SPI_XFER_END) 239 spi_cs_deactivate(dev); 240 241 return 0; 242 } 243 244 static int xilinx_spi_set_speed(struct udevice *bus, uint speed) 245 { 246 struct xilinx_spi_priv *priv = dev_get_priv(bus); 247 248 priv->freq = speed; 249 250 debug("xilinx_spi_set_speed: regs=%p, speed=%d\n", priv->regs, 251 priv->freq); 252 253 return 0; 254 } 255 256 static int xilinx_spi_set_mode(struct udevice *bus, uint mode) 257 { 258 struct xilinx_spi_priv *priv = dev_get_priv(bus); 259 struct xilinx_spi_regs *regs = priv->regs; 260 uint32_t spicr; 261 262 spicr = readl(®s->spicr); 263 if (mode & SPI_LSB_FIRST) 264 spicr |= SPICR_LSB_FIRST; 265 if (mode & SPI_CPHA) 266 spicr |= SPICR_CPHA; 267 if (mode & SPI_CPOL) 268 spicr |= SPICR_CPOL; 269 if (mode & SPI_LOOP) 270 spicr |= SPICR_LOOP; 271 272 writel(spicr, ®s->spicr); 273 priv->mode = mode; 274 275 debug("xilinx_spi_set_mode: regs=%p, mode=%d\n", priv->regs, 276 priv->mode); 277 278 return 0; 279 } 280 281 static const struct dm_spi_ops xilinx_spi_ops = { 282 .claim_bus = xilinx_spi_claim_bus, 283 .release_bus = xilinx_spi_release_bus, 284 .xfer = xilinx_spi_xfer, 285 .set_speed = xilinx_spi_set_speed, 286 .set_mode = xilinx_spi_set_mode, 287 }; 288 289 static const struct udevice_id xilinx_spi_ids[] = { 290 { .compatible = "xlnx,xps-spi-2.00.a" }, 291 { .compatible = "xlnx,xps-spi-2.00.b" }, 292 { } 293 }; 294 295 U_BOOT_DRIVER(xilinx_spi) = { 296 .name = "xilinx_spi", 297 .id = UCLASS_SPI, 298 .of_match = xilinx_spi_ids, 299 .ops = &xilinx_spi_ops, 300 .priv_auto_alloc_size = sizeof(struct xilinx_spi_priv), 301 .probe = xilinx_spi_probe, 302 }; 303