1 /* 2 * TI QSPI driver 3 * 4 * Copyright (C) 2013, Texas Instruments, Incorporated 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <asm/io.h> 11 #include <asm/arch/omap.h> 12 #include <malloc.h> 13 #include <spi.h> 14 #include <asm/gpio.h> 15 #include <asm/omap_gpio.h> 16 17 /* ti qpsi register bit masks */ 18 #define QSPI_TIMEOUT 2000000 19 #define QSPI_FCLK 192000000 20 /* clock control */ 21 #define QSPI_CLK_EN (1 << 31) 22 #define QSPI_CLK_DIV_MAX 0xffff 23 /* command */ 24 #define QSPI_EN_CS(n) (n << 28) 25 #define QSPI_WLEN(n) ((n-1) << 19) 26 #define QSPI_3_PIN (1 << 18) 27 #define QSPI_RD_SNGL (1 << 16) 28 #define QSPI_WR_SNGL (2 << 16) 29 #define QSPI_INVAL (4 << 16) 30 #define QSPI_RD_QUAD (7 << 16) 31 /* device control */ 32 #define QSPI_DD(m, n) (m << (3 + n*8)) 33 #define QSPI_CKPHA(n) (1 << (2 + n*8)) 34 #define QSPI_CSPOL(n) (1 << (1 + n*8)) 35 #define QSPI_CKPOL(n) (1 << (n*8)) 36 /* status */ 37 #define QSPI_WC (1 << 1) 38 #define QSPI_BUSY (1 << 0) 39 #define QSPI_WC_BUSY (QSPI_WC | QSPI_BUSY) 40 #define QSPI_XFER_DONE QSPI_WC 41 #define MM_SWITCH 0x01 42 #define MEM_CS 0x100 43 #define MEM_CS_UNSELECT 0xfffff0ff 44 #define MMAP_START_ADDR_DRA 0x5c000000 45 #define MMAP_START_ADDR_AM43x 0x30000000 46 #define CORE_CTRL_IO 0x4a002558 47 48 #define QSPI_CMD_READ (0x3 << 0) 49 #define QSPI_CMD_READ_QUAD (0x6b << 0) 50 #define QSPI_CMD_READ_FAST (0x0b << 0) 51 #define QSPI_SETUP0_NUM_A_BYTES (0x2 << 8) 52 #define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10) 53 #define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10) 54 #define QSPI_SETUP0_READ_NORMAL (0x0 << 12) 55 #define QSPI_SETUP0_READ_QUAD (0x3 << 12) 56 #define QSPI_CMD_WRITE (0x2 << 16) 57 #define QSPI_NUM_DUMMY_BITS (0x0 << 24) 58 59 /* ti qspi register set */ 60 struct ti_qspi_regs { 61 u32 pid; 62 u32 pad0[3]; 63 u32 sysconfig; 64 u32 pad1[3]; 65 u32 int_stat_raw; 66 u32 int_stat_en; 67 u32 int_en_set; 68 u32 int_en_ctlr; 69 u32 intc_eoi; 70 u32 pad2[3]; 71 u32 clk_ctrl; 72 u32 dc; 73 u32 cmd; 74 u32 status; 75 u32 data; 76 u32 setup0; 77 u32 setup1; 78 u32 setup2; 79 u32 setup3; 80 u32 memswitch; 81 u32 data1; 82 u32 data2; 83 u32 data3; 84 }; 85 86 /* ti qspi slave */ 87 struct ti_qspi_slave { 88 struct spi_slave slave; 89 struct ti_qspi_regs *base; 90 unsigned int mode; 91 u32 cmd; 92 u32 dc; 93 }; 94 95 static inline struct ti_qspi_slave *to_ti_qspi_slave(struct spi_slave *slave) 96 { 97 return container_of(slave, struct ti_qspi_slave, slave); 98 } 99 100 static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) 101 { 102 struct spi_slave *slave = &qslave->slave; 103 u32 memval = 0; 104 105 #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) 106 slave->memory_map = (void *)MMAP_START_ADDR_DRA; 107 #else 108 slave->memory_map = (void *)MMAP_START_ADDR_AM43x; 109 slave->op_mode_rx = 8; 110 #endif 111 112 memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | 113 QSPI_SETUP0_NUM_D_BYTES_NO_BITS | 114 QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE | 115 QSPI_NUM_DUMMY_BITS; 116 117 writel(memval, &qslave->base->setup0); 118 } 119 120 static void ti_spi_set_speed(struct spi_slave *slave, uint hz) 121 { 122 struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); 123 uint clk_div; 124 125 debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div); 126 127 if (!hz) 128 clk_div = 0; 129 else 130 clk_div = (QSPI_FCLK / hz) - 1; 131 132 /* disable SCLK */ 133 writel(readl(&qslave->base->clk_ctrl) & ~QSPI_CLK_EN, 134 &qslave->base->clk_ctrl); 135 136 /* assign clk_div values */ 137 if (clk_div < 0) 138 clk_div = 0; 139 else if (clk_div > QSPI_CLK_DIV_MAX) 140 clk_div = QSPI_CLK_DIV_MAX; 141 142 /* enable SCLK */ 143 writel(QSPI_CLK_EN | clk_div, &qslave->base->clk_ctrl); 144 } 145 146 int spi_cs_is_valid(unsigned int bus, unsigned int cs) 147 { 148 return 1; 149 } 150 151 void spi_cs_activate(struct spi_slave *slave) 152 { 153 /* CS handled in xfer */ 154 return; 155 } 156 157 void spi_cs_deactivate(struct spi_slave *slave) 158 { 159 struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); 160 161 debug("spi_cs_deactivate: 0x%08x\n", (u32)slave); 162 163 writel(qslave->cmd | QSPI_INVAL, &qslave->base->cmd); 164 } 165 166 void spi_init(void) 167 { 168 /* nothing to do */ 169 } 170 171 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, 172 unsigned int max_hz, unsigned int mode) 173 { 174 struct ti_qspi_slave *qslave; 175 176 #ifdef CONFIG_AM43XX 177 gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio"); 178 gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1); 179 #endif 180 181 qslave = spi_alloc_slave(struct ti_qspi_slave, bus, cs); 182 if (!qslave) { 183 printf("SPI_error: Fail to allocate ti_qspi_slave\n"); 184 return NULL; 185 } 186 187 qslave->base = (struct ti_qspi_regs *)QSPI_BASE; 188 qslave->mode = mode; 189 190 ti_spi_set_speed(&qslave->slave, max_hz); 191 192 #ifdef CONFIG_TI_SPI_MMAP 193 ti_spi_setup_spi_register(qslave); 194 #endif 195 196 return &qslave->slave; 197 } 198 199 void spi_free_slave(struct spi_slave *slave) 200 { 201 struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); 202 free(qslave); 203 } 204 205 int spi_claim_bus(struct spi_slave *slave) 206 { 207 struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); 208 209 debug("spi_claim_bus: bus:%i cs:%i\n", slave->bus, slave->cs); 210 211 qslave->dc = 0; 212 if (qslave->mode & SPI_CPHA) 213 qslave->dc |= QSPI_CKPHA(slave->cs); 214 if (qslave->mode & SPI_CPOL) 215 qslave->dc |= QSPI_CKPOL(slave->cs); 216 if (qslave->mode & SPI_CS_HIGH) 217 qslave->dc |= QSPI_CSPOL(slave->cs); 218 219 writel(qslave->dc, &qslave->base->dc); 220 writel(0, &qslave->base->cmd); 221 writel(0, &qslave->base->data); 222 223 return 0; 224 } 225 226 void spi_release_bus(struct spi_slave *slave) 227 { 228 struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); 229 230 debug("spi_release_bus: bus:%i cs:%i\n", slave->bus, slave->cs); 231 232 writel(0, &qslave->base->dc); 233 writel(0, &qslave->base->cmd); 234 writel(0, &qslave->base->data); 235 } 236 237 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, 238 void *din, unsigned long flags) 239 { 240 struct ti_qspi_slave *qslave = to_ti_qspi_slave(slave); 241 uint words = bitlen >> 3; /* fixed 8-bit word length */ 242 const uchar *txp = dout; 243 uchar *rxp = din; 244 uint status; 245 int timeout; 246 247 #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) 248 int val; 249 #endif 250 251 debug("spi_xfer: bus:%i cs:%i bitlen:%i words:%i flags:%lx\n", 252 slave->bus, slave->cs, bitlen, words, flags); 253 254 /* Setup mmap flags */ 255 if (flags & SPI_XFER_MMAP) { 256 writel(MM_SWITCH, &qslave->base->memswitch); 257 #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) 258 val = readl(CORE_CTRL_IO); 259 val |= MEM_CS; 260 writel(val, CORE_CTRL_IO); 261 #endif 262 return 0; 263 } else if (flags & SPI_XFER_MMAP_END) { 264 writel(~MM_SWITCH, &qslave->base->memswitch); 265 #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) 266 val = readl(CORE_CTRL_IO); 267 val &= MEM_CS_UNSELECT; 268 writel(val, CORE_CTRL_IO); 269 #endif 270 return 0; 271 } 272 273 if (bitlen == 0) 274 return -1; 275 276 if (bitlen % 8) { 277 debug("spi_xfer: Non byte aligned SPI transfer\n"); 278 return -1; 279 } 280 281 /* Setup command reg */ 282 qslave->cmd = 0; 283 qslave->cmd |= QSPI_WLEN(8); 284 qslave->cmd |= QSPI_EN_CS(slave->cs); 285 if (flags & SPI_3WIRE) 286 qslave->cmd |= QSPI_3_PIN; 287 qslave->cmd |= 0xfff; 288 289 /* FIXME: This delay is required for successfull 290 * completion of read/write/erase. Once its root 291 * caused, it will be remove from the driver. 292 */ 293 #ifdef CONFIG_AM43XX 294 udelay(100); 295 #endif 296 while (words--) { 297 if (txp) { 298 debug("tx cmd %08x dc %08x data %02x\n", 299 qslave->cmd | QSPI_WR_SNGL, qslave->dc, *txp); 300 writel(*txp++, &qslave->base->data); 301 writel(qslave->cmd | QSPI_WR_SNGL, 302 &qslave->base->cmd); 303 status = readl(&qslave->base->status); 304 timeout = QSPI_TIMEOUT; 305 while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) { 306 if (--timeout < 0) { 307 printf("spi_xfer: TX timeout!\n"); 308 return -1; 309 } 310 status = readl(&qslave->base->status); 311 } 312 debug("tx done, status %08x\n", status); 313 } 314 if (rxp) { 315 qslave->cmd |= QSPI_RD_SNGL; 316 debug("rx cmd %08x dc %08x\n", 317 qslave->cmd, qslave->dc); 318 #ifdef CONFIG_DRA7XX 319 udelay(500); 320 #endif 321 writel(qslave->cmd, &qslave->base->cmd); 322 status = readl(&qslave->base->status); 323 timeout = QSPI_TIMEOUT; 324 while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) { 325 if (--timeout < 0) { 326 printf("spi_xfer: RX timeout!\n"); 327 return -1; 328 } 329 status = readl(&qslave->base->status); 330 } 331 *rxp++ = readl(&qslave->base->data); 332 debug("rx done, status %08x, read %02x\n", 333 status, *(rxp-1)); 334 } 335 } 336 337 /* Terminate frame */ 338 if (flags & SPI_XFER_END) 339 spi_cs_deactivate(slave); 340 341 return 0; 342 } 343