xref: /openbmc/u-boot/drivers/spi/ti_qspi.c (revision e8f80a5a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * TI QSPI driver
4  *
5  * Copyright (C) 2013, Texas Instruments, Incorporated
6  */
7 
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch/omap.h>
11 #include <malloc.h>
12 #include <spi.h>
13 #include <dm.h>
14 #include <asm/gpio.h>
15 #include <asm/omap_gpio.h>
16 #include <asm/omap_common.h>
17 #include <asm/ti-common/ti-edma3.h>
18 #include <linux/kernel.h>
19 #include <regmap.h>
20 #include <syscon.h>
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 /* ti qpsi register bit masks */
25 #define QSPI_TIMEOUT                    2000000
26 #define QSPI_FCLK			192000000
27 #define QSPI_DRA7XX_FCLK                76800000
28 #define QSPI_WLEN_MAX_BITS		128
29 #define QSPI_WLEN_MAX_BYTES		(QSPI_WLEN_MAX_BITS >> 3)
30 #define QSPI_WLEN_MASK			QSPI_WLEN(QSPI_WLEN_MAX_BITS)
31 /* clock control */
32 #define QSPI_CLK_EN                     BIT(31)
33 #define QSPI_CLK_DIV_MAX                0xffff
34 /* command */
35 #define QSPI_EN_CS(n)                   (n << 28)
36 #define QSPI_WLEN(n)                    ((n-1) << 19)
37 #define QSPI_3_PIN                      BIT(18)
38 #define QSPI_RD_SNGL                    BIT(16)
39 #define QSPI_WR_SNGL                    (2 << 16)
40 #define QSPI_INVAL                      (4 << 16)
41 #define QSPI_RD_QUAD                    (7 << 16)
42 /* device control */
43 #define QSPI_DD(m, n)                   (m << (3 + n*8))
44 #define QSPI_CKPHA(n)                   (1 << (2 + n*8))
45 #define QSPI_CSPOL(n)                   (1 << (1 + n*8))
46 #define QSPI_CKPOL(n)                   (1 << (n*8))
47 /* status */
48 #define QSPI_WC                         BIT(1)
49 #define QSPI_BUSY                       BIT(0)
50 #define QSPI_WC_BUSY                    (QSPI_WC | QSPI_BUSY)
51 #define QSPI_XFER_DONE                  QSPI_WC
52 #define MM_SWITCH                       0x01
53 #define MEM_CS(cs)                      ((cs + 1) << 8)
54 #define MEM_CS_UNSELECT                 0xfffff8ff
55 #define MMAP_START_ADDR_DRA		0x5c000000
56 #define MMAP_START_ADDR_AM43x		0x30000000
57 #define CORE_CTRL_IO                    0x4a002558
58 
59 #define QSPI_CMD_READ                   (0x3 << 0)
60 #define QSPI_CMD_READ_DUAL		(0x6b << 0)
61 #define QSPI_CMD_READ_QUAD              (0x6c << 0)
62 #define QSPI_CMD_READ_FAST              (0x0b << 0)
63 #define QSPI_SETUP0_NUM_A_BYTES         (0x3 << 8)
64 #define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10)
65 #define QSPI_SETUP0_NUM_D_BYTES_8_BITS  (0x1 << 10)
66 #define QSPI_SETUP0_READ_NORMAL         (0x0 << 12)
67 #define QSPI_SETUP0_READ_DUAL           (0x1 << 12)
68 #define QSPI_SETUP0_READ_QUAD           (0x3 << 12)
69 #define QSPI_CMD_WRITE                  (0x12 << 16)
70 #define QSPI_NUM_DUMMY_BITS             (0x0 << 24)
71 
72 /* ti qspi register set */
73 struct ti_qspi_regs {
74 	u32 pid;
75 	u32 pad0[3];
76 	u32 sysconfig;
77 	u32 pad1[3];
78 	u32 int_stat_raw;
79 	u32 int_stat_en;
80 	u32 int_en_set;
81 	u32 int_en_ctlr;
82 	u32 intc_eoi;
83 	u32 pad2[3];
84 	u32 clk_ctrl;
85 	u32 dc;
86 	u32 cmd;
87 	u32 status;
88 	u32 data;
89 	u32 setup0;
90 	u32 setup1;
91 	u32 setup2;
92 	u32 setup3;
93 	u32 memswitch;
94 	u32 data1;
95 	u32 data2;
96 	u32 data3;
97 };
98 
99 /* ti qspi priv */
100 struct ti_qspi_priv {
101 #ifndef CONFIG_DM_SPI
102 	struct spi_slave slave;
103 #else
104 	void *memory_map;
105 	uint max_hz;
106 	u32 num_cs;
107 #endif
108 	struct ti_qspi_regs *base;
109 	void *ctrl_mod_mmap;
110 	ulong fclk;
111 	unsigned int mode;
112 	u32 cmd;
113 	u32 dc;
114 };
115 
ti_spi_set_speed(struct ti_qspi_priv * priv,uint hz)116 static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
117 {
118 	uint clk_div;
119 
120 	if (!hz)
121 		clk_div = 0;
122 	else
123 		clk_div = DIV_ROUND_UP(priv->fclk, hz) - 1;
124 
125 	/* truncate clk_div value to QSPI_CLK_DIV_MAX */
126 	if (clk_div > QSPI_CLK_DIV_MAX)
127 		clk_div = QSPI_CLK_DIV_MAX;
128 
129 	debug("ti_spi_set_speed: hz: %d, clock divider %d\n", hz, clk_div);
130 
131 	/* disable SCLK */
132 	writel(readl(&priv->base->clk_ctrl) & ~QSPI_CLK_EN,
133 	       &priv->base->clk_ctrl);
134 	/* enable SCLK and program the clk divider */
135 	writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl);
136 }
137 
ti_qspi_cs_deactivate(struct ti_qspi_priv * priv)138 static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv)
139 {
140 	writel(priv->cmd | QSPI_INVAL, &priv->base->cmd);
141 	/* dummy readl to ensure bus sync */
142 	readl(&priv->base->cmd);
143 }
144 
__ti_qspi_set_mode(struct ti_qspi_priv * priv,unsigned int mode)145 static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode)
146 {
147 	priv->dc = 0;
148 	if (mode & SPI_CPHA)
149 		priv->dc |= QSPI_CKPHA(0);
150 	if (mode & SPI_CPOL)
151 		priv->dc |= QSPI_CKPOL(0);
152 	if (mode & SPI_CS_HIGH)
153 		priv->dc |= QSPI_CSPOL(0);
154 
155 	return 0;
156 }
157 
__ti_qspi_claim_bus(struct ti_qspi_priv * priv,int cs)158 static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs)
159 {
160 	writel(priv->dc, &priv->base->dc);
161 	writel(0, &priv->base->cmd);
162 	writel(0, &priv->base->data);
163 
164 	priv->dc <<= cs * 8;
165 	writel(priv->dc, &priv->base->dc);
166 
167 	return 0;
168 }
169 
__ti_qspi_release_bus(struct ti_qspi_priv * priv)170 static void __ti_qspi_release_bus(struct ti_qspi_priv *priv)
171 {
172 	writel(0, &priv->base->dc);
173 	writel(0, &priv->base->cmd);
174 	writel(0, &priv->base->data);
175 }
176 
ti_qspi_ctrl_mode_mmap(void * ctrl_mod_mmap,int cs,bool enable)177 static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable)
178 {
179 	u32 val;
180 
181 	val = readl(ctrl_mod_mmap);
182 	if (enable)
183 		val |= MEM_CS(cs);
184 	else
185 		val &= MEM_CS_UNSELECT;
186 	writel(val, ctrl_mod_mmap);
187 }
188 
__ti_qspi_xfer(struct ti_qspi_priv * priv,unsigned int bitlen,const void * dout,void * din,unsigned long flags,u32 cs)189 static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen,
190 			const void *dout, void *din, unsigned long flags,
191 			u32 cs)
192 {
193 	uint words = bitlen >> 3; /* fixed 8-bit word length */
194 	const uchar *txp = dout;
195 	uchar *rxp = din;
196 	uint status;
197 	int timeout;
198 
199 	/* Setup mmap flags */
200 	if (flags & SPI_XFER_MMAP) {
201 		writel(MM_SWITCH, &priv->base->memswitch);
202 		if (priv->ctrl_mod_mmap)
203 			ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true);
204 		return 0;
205 	} else if (flags & SPI_XFER_MMAP_END) {
206 		writel(~MM_SWITCH, &priv->base->memswitch);
207 		if (priv->ctrl_mod_mmap)
208 			ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false);
209 		return 0;
210 	}
211 
212 	if (bitlen == 0)
213 		return -1;
214 
215 	if (bitlen % 8) {
216 		debug("spi_xfer: Non byte aligned SPI transfer\n");
217 		return -1;
218 	}
219 
220 	/* Setup command reg */
221 	priv->cmd = 0;
222 	priv->cmd |= QSPI_WLEN(8);
223 	priv->cmd |= QSPI_EN_CS(cs);
224 	if (priv->mode & SPI_3WIRE)
225 		priv->cmd |= QSPI_3_PIN;
226 	priv->cmd |= 0xfff;
227 
228 	while (words) {
229 		u8 xfer_len = 0;
230 
231 		if (txp) {
232 			u32 cmd = priv->cmd;
233 
234 			if (words >= QSPI_WLEN_MAX_BYTES) {
235 				u32 *txbuf = (u32 *)txp;
236 				u32 data;
237 
238 				data = cpu_to_be32(*txbuf++);
239 				writel(data, &priv->base->data3);
240 				data = cpu_to_be32(*txbuf++);
241 				writel(data, &priv->base->data2);
242 				data = cpu_to_be32(*txbuf++);
243 				writel(data, &priv->base->data1);
244 				data = cpu_to_be32(*txbuf++);
245 				writel(data, &priv->base->data);
246 				cmd &= ~QSPI_WLEN_MASK;
247 				cmd |= QSPI_WLEN(QSPI_WLEN_MAX_BITS);
248 				xfer_len = QSPI_WLEN_MAX_BYTES;
249 			} else {
250 				writeb(*txp, &priv->base->data);
251 				xfer_len = 1;
252 			}
253 			debug("tx cmd %08x dc %08x\n",
254 			      cmd | QSPI_WR_SNGL, priv->dc);
255 			writel(cmd | QSPI_WR_SNGL, &priv->base->cmd);
256 			status = readl(&priv->base->status);
257 			timeout = QSPI_TIMEOUT;
258 			while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
259 				if (--timeout < 0) {
260 					printf("spi_xfer: TX timeout!\n");
261 					return -1;
262 				}
263 				status = readl(&priv->base->status);
264 			}
265 			txp += xfer_len;
266 			debug("tx done, status %08x\n", status);
267 		}
268 		if (rxp) {
269 			debug("rx cmd %08x dc %08x\n",
270 			      ((u32)(priv->cmd | QSPI_RD_SNGL)), priv->dc);
271 			writel(priv->cmd | QSPI_RD_SNGL, &priv->base->cmd);
272 			status = readl(&priv->base->status);
273 			timeout = QSPI_TIMEOUT;
274 			while ((status & QSPI_WC_BUSY) != QSPI_XFER_DONE) {
275 				if (--timeout < 0) {
276 					printf("spi_xfer: RX timeout!\n");
277 					return -1;
278 				}
279 				status = readl(&priv->base->status);
280 			}
281 			*rxp++ = readl(&priv->base->data);
282 			xfer_len = 1;
283 			debug("rx done, status %08x, read %02x\n",
284 			      status, *(rxp-1));
285 		}
286 		words -= xfer_len;
287 	}
288 
289 	/* Terminate frame */
290 	if (flags & SPI_XFER_END)
291 		ti_qspi_cs_deactivate(priv);
292 
293 	return 0;
294 }
295 
296 /* TODO: control from sf layer to here through dm-spi */
297 #if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA)
spi_flash_copy_mmap(void * data,void * offset,size_t len)298 void spi_flash_copy_mmap(void *data, void *offset, size_t len)
299 {
300 	unsigned int			addr = (unsigned int) (data);
301 	unsigned int			edma_slot_num = 1;
302 
303 	/* Invalidate the area, so no writeback into the RAM races with DMA */
304 	invalidate_dcache_range(addr, addr + roundup(len, ARCH_DMA_MINALIGN));
305 
306 	/* enable edma3 clocks */
307 	enable_edma3_clocks();
308 
309 	/* Call edma3 api to do actual DMA transfer	*/
310 	edma3_transfer(EDMA3_BASE, edma_slot_num, data, offset, len);
311 
312 	/* disable edma3 clocks */
313 	disable_edma3_clocks();
314 
315 	*((unsigned int *)offset) += len;
316 }
317 #endif
318 
319 #ifndef CONFIG_DM_SPI
320 
to_ti_qspi_priv(struct spi_slave * slave)321 static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave)
322 {
323 	return container_of(slave, struct ti_qspi_priv, slave);
324 }
325 
spi_cs_is_valid(unsigned int bus,unsigned int cs)326 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
327 {
328 	return 1;
329 }
330 
spi_cs_activate(struct spi_slave * slave)331 void spi_cs_activate(struct spi_slave *slave)
332 {
333 	/* CS handled in xfer */
334 	return;
335 }
336 
spi_cs_deactivate(struct spi_slave * slave)337 void spi_cs_deactivate(struct spi_slave *slave)
338 {
339 	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
340 	ti_qspi_cs_deactivate(priv);
341 }
342 
spi_init(void)343 void spi_init(void)
344 {
345 	/* nothing to do */
346 }
347 
ti_spi_setup_spi_register(struct ti_qspi_priv * priv)348 static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv)
349 {
350 	u32 memval = 0;
351 
352 #ifdef CONFIG_QSPI_QUAD_SUPPORT
353 	struct spi_slave *slave = &priv->slave;
354 	memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES |
355 			QSPI_SETUP0_NUM_D_BYTES_8_BITS |
356 			QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE |
357 			QSPI_NUM_DUMMY_BITS);
358 	slave->mode |= SPI_RX_QUAD;
359 #else
360 	memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES |
361 			QSPI_SETUP0_NUM_D_BYTES_NO_BITS |
362 			QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE |
363 			QSPI_NUM_DUMMY_BITS;
364 #endif
365 
366 	writel(memval, &priv->base->setup0);
367 }
368 
spi_setup_slave(unsigned int bus,unsigned int cs,unsigned int max_hz,unsigned int mode)369 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
370 				  unsigned int max_hz, unsigned int mode)
371 {
372 	struct ti_qspi_priv *priv;
373 
374 #ifdef CONFIG_AM43XX
375 	gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio");
376 	gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1);
377 #endif
378 
379 	priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs);
380 	if (!priv) {
381 		printf("SPI_error: Fail to allocate ti_qspi_priv\n");
382 		return NULL;
383 	}
384 
385 	priv->base = (struct ti_qspi_regs *)QSPI_BASE;
386 	priv->mode = mode;
387 #if defined(CONFIG_DRA7XX)
388 	priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO;
389 	priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA;
390 	priv->fclk = QSPI_DRA7XX_FCLK;
391 #else
392 	priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x;
393 	priv->fclk = QSPI_FCLK;
394 #endif
395 
396 	ti_spi_set_speed(priv, max_hz);
397 
398 #ifdef CONFIG_TI_SPI_MMAP
399 	ti_spi_setup_spi_register(priv);
400 #endif
401 
402 	return &priv->slave;
403 }
404 
spi_free_slave(struct spi_slave * slave)405 void spi_free_slave(struct spi_slave *slave)
406 {
407 	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
408 	free(priv);
409 }
410 
spi_claim_bus(struct spi_slave * slave)411 int spi_claim_bus(struct spi_slave *slave)
412 {
413 	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
414 
415 	debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
416 	__ti_qspi_set_mode(priv, priv->mode);
417 	return __ti_qspi_claim_bus(priv, priv->slave.cs);
418 }
spi_release_bus(struct spi_slave * slave)419 void spi_release_bus(struct spi_slave *slave)
420 {
421 	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
422 
423 	debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs);
424 	__ti_qspi_release_bus(priv);
425 }
426 
spi_xfer(struct spi_slave * slave,unsigned int bitlen,const void * dout,void * din,unsigned long flags)427 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
428 	     void *din, unsigned long flags)
429 {
430 	struct ti_qspi_priv *priv = to_ti_qspi_priv(slave);
431 
432 	debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n",
433 	      priv->slave.bus, priv->slave.cs, bitlen, flags);
434 	return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs);
435 }
436 
437 #else /* CONFIG_DM_SPI */
438 
__ti_qspi_setup_memorymap(struct ti_qspi_priv * priv,struct spi_slave * slave,bool enable)439 static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv,
440 				      struct spi_slave *slave,
441 				      bool enable)
442 {
443 	u32 memval;
444 	u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL);
445 
446 	if (!enable) {
447 		writel(0, &priv->base->setup0);
448 		return;
449 	}
450 
451 	memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS;
452 
453 	switch (mode) {
454 	case SPI_RX_QUAD:
455 		memval |= QSPI_CMD_READ_QUAD;
456 		memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
457 		memval |= QSPI_SETUP0_READ_QUAD;
458 		slave->mode |= SPI_RX_QUAD;
459 		break;
460 	case SPI_RX_DUAL:
461 		memval |= QSPI_CMD_READ_DUAL;
462 		memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS;
463 		memval |= QSPI_SETUP0_READ_DUAL;
464 		break;
465 	default:
466 		memval |= QSPI_CMD_READ;
467 		memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS;
468 		memval |= QSPI_SETUP0_READ_NORMAL;
469 		break;
470 	}
471 
472 	writel(memval, &priv->base->setup0);
473 }
474 
475 
ti_qspi_set_speed(struct udevice * bus,uint max_hz)476 static int ti_qspi_set_speed(struct udevice *bus, uint max_hz)
477 {
478 	struct ti_qspi_priv *priv = dev_get_priv(bus);
479 
480 	ti_spi_set_speed(priv, max_hz);
481 
482 	return 0;
483 }
484 
ti_qspi_set_mode(struct udevice * bus,uint mode)485 static int ti_qspi_set_mode(struct udevice *bus, uint mode)
486 {
487 	struct ti_qspi_priv *priv = dev_get_priv(bus);
488 	return __ti_qspi_set_mode(priv, mode);
489 }
490 
ti_qspi_claim_bus(struct udevice * dev)491 static int ti_qspi_claim_bus(struct udevice *dev)
492 {
493 	struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
494 	struct spi_slave *slave = dev_get_parent_priv(dev);
495 	struct ti_qspi_priv *priv;
496 	struct udevice *bus;
497 
498 	bus = dev->parent;
499 	priv = dev_get_priv(bus);
500 
501 	if (slave_plat->cs > priv->num_cs) {
502 		debug("invalid qspi chip select\n");
503 		return -EINVAL;
504 	}
505 
506 	__ti_qspi_setup_memorymap(priv, slave, true);
507 
508 	return __ti_qspi_claim_bus(priv, slave_plat->cs);
509 }
510 
ti_qspi_release_bus(struct udevice * dev)511 static int ti_qspi_release_bus(struct udevice *dev)
512 {
513 	struct spi_slave *slave = dev_get_parent_priv(dev);
514 	struct ti_qspi_priv *priv;
515 	struct udevice *bus;
516 
517 	bus = dev->parent;
518 	priv = dev_get_priv(bus);
519 
520 	__ti_qspi_setup_memorymap(priv, slave, false);
521 	__ti_qspi_release_bus(priv);
522 
523 	return 0;
524 }
525 
ti_qspi_xfer(struct udevice * dev,unsigned int bitlen,const void * dout,void * din,unsigned long flags)526 static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen,
527 			const void *dout, void *din, unsigned long flags)
528 {
529 	struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
530 	struct ti_qspi_priv *priv;
531 	struct udevice *bus;
532 
533 	bus = dev->parent;
534 	priv = dev_get_priv(bus);
535 
536 	if (slave->cs > priv->num_cs) {
537 		debug("invalid qspi chip select\n");
538 		return -EINVAL;
539 	}
540 
541 	return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs);
542 }
543 
ti_qspi_probe(struct udevice * bus)544 static int ti_qspi_probe(struct udevice *bus)
545 {
546 	struct ti_qspi_priv *priv = dev_get_priv(bus);
547 
548 	priv->fclk = dev_get_driver_data(bus);
549 
550 	return 0;
551 }
552 
map_syscon_chipselects(struct udevice * bus)553 static void *map_syscon_chipselects(struct udevice *bus)
554 {
555 #if CONFIG_IS_ENABLED(SYSCON)
556 	struct udevice *syscon;
557 	struct regmap *regmap;
558 	const fdt32_t *cell;
559 	int len, err;
560 
561 	err = uclass_get_device_by_phandle(UCLASS_SYSCON, bus,
562 					   "syscon-chipselects", &syscon);
563 	if (err) {
564 		debug("%s: unable to find syscon device (%d)\n", __func__,
565 		      err);
566 		return NULL;
567 	}
568 
569 	regmap = syscon_get_regmap(syscon);
570 	if (IS_ERR(regmap)) {
571 		debug("%s: unable to find regmap (%ld)\n", __func__,
572 		      PTR_ERR(regmap));
573 		return NULL;
574 	}
575 
576 	cell = fdt_getprop(gd->fdt_blob, dev_of_offset(bus),
577 			   "syscon-chipselects", &len);
578 	if (len < 2*sizeof(fdt32_t)) {
579 		debug("%s: offset not available\n", __func__);
580 		return NULL;
581 	}
582 
583 	return fdtdec_get_number(cell + 1, 1) + regmap_get_range(regmap, 0);
584 #else
585 	fdt_addr_t addr;
586 	addr = devfdt_get_addr_index(bus, 2);
587 	return (addr == FDT_ADDR_T_NONE) ? NULL :
588 		map_physmem(addr, 0, MAP_NOCACHE);
589 #endif
590 }
591 
ti_qspi_ofdata_to_platdata(struct udevice * bus)592 static int ti_qspi_ofdata_to_platdata(struct udevice *bus)
593 {
594 	struct ti_qspi_priv *priv = dev_get_priv(bus);
595 	const void *blob = gd->fdt_blob;
596 	int node = dev_of_offset(bus);
597 
598 	priv->ctrl_mod_mmap = map_syscon_chipselects(bus);
599 	priv->base = map_physmem(devfdt_get_addr(bus),
600 				 sizeof(struct ti_qspi_regs), MAP_NOCACHE);
601 	priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0,
602 				       MAP_NOCACHE);
603 
604 	priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1);
605 	if (priv->max_hz < 0) {
606 		debug("Error: Max frequency missing\n");
607 		return -ENODEV;
608 	}
609 	priv->num_cs = fdtdec_get_int(blob, node, "num-cs", 4);
610 
611 	debug("%s: regs=<0x%x>, max-frequency=%d\n", __func__,
612 	      (int)priv->base, priv->max_hz);
613 
614 	return 0;
615 }
616 
ti_qspi_child_pre_probe(struct udevice * dev)617 static int ti_qspi_child_pre_probe(struct udevice *dev)
618 {
619 	struct spi_slave *slave = dev_get_parent_priv(dev);
620 	struct udevice *bus = dev_get_parent(dev);
621 	struct ti_qspi_priv *priv = dev_get_priv(bus);
622 
623 	slave->memory_map = priv->memory_map;
624 	return 0;
625 }
626 
627 static const struct dm_spi_ops ti_qspi_ops = {
628 	.claim_bus	= ti_qspi_claim_bus,
629 	.release_bus	= ti_qspi_release_bus,
630 	.xfer		= ti_qspi_xfer,
631 	.set_speed	= ti_qspi_set_speed,
632 	.set_mode	= ti_qspi_set_mode,
633 };
634 
635 static const struct udevice_id ti_qspi_ids[] = {
636 	{ .compatible = "ti,dra7xxx-qspi",	.data = QSPI_DRA7XX_FCLK},
637 	{ .compatible = "ti,am4372-qspi",	.data = QSPI_FCLK},
638 	{ }
639 };
640 
641 U_BOOT_DRIVER(ti_qspi) = {
642 	.name	= "ti_qspi",
643 	.id	= UCLASS_SPI,
644 	.of_match = ti_qspi_ids,
645 	.ops	= &ti_qspi_ops,
646 	.ofdata_to_platdata = ti_qspi_ofdata_to_platdata,
647 	.priv_auto_alloc_size = sizeof(struct ti_qspi_priv),
648 	.probe	= ti_qspi_probe,
649 	.child_pre_probe = ti_qspi_child_pre_probe,
650 };
651 #endif /* CONFIG_DM_SPI */
652