xref: /openbmc/u-boot/drivers/spi/tegra20_slink.c (revision 9d466f2f)
1 /*
2  * NVIDIA Tegra SPI-SLINK controller
3  *
4  * Copyright (c) 2010-2013 NVIDIA Corporation
5  *
6  * SPDX-License-Identifier:	GPL-2.0
7  */
8 
9 #include <common.h>
10 #include <dm.h>
11 #include <asm/io.h>
12 #include <asm/arch/clock.h>
13 #include <asm/arch-tegra/clk_rst.h>
14 #include <spi.h>
15 #include <fdtdec.h>
16 #include "tegra_spi.h"
17 
18 DECLARE_GLOBAL_DATA_PTR;
19 
20 /* COMMAND */
21 #define SLINK_CMD_ENB			BIT(31)
22 #define SLINK_CMD_GO			BIT(30)
23 #define SLINK_CMD_M_S			BIT(28)
24 #define SLINK_CMD_IDLE_SCLK_DRIVE_LOW	(0 << 24)
25 #define SLINK_CMD_IDLE_SCLK_DRIVE_HIGH	BIT(24)
26 #define SLINK_CMD_IDLE_SCLK_PULL_LOW	(2 << 24)
27 #define SLINK_CMD_IDLE_SCLK_PULL_HIGH	(3 << 24)
28 #define SLINK_CMD_IDLE_SCLK_MASK	(3 << 24)
29 #define SLINK_CMD_CK_SDA		BIT(21)
30 #define SLINK_CMD_CS_POL		BIT(13)
31 #define SLINK_CMD_CS_VAL		BIT(12)
32 #define SLINK_CMD_CS_SOFT		BIT(11)
33 #define SLINK_CMD_BIT_LENGTH		BIT(4)
34 #define SLINK_CMD_BIT_LENGTH_MASK	GENMASK(4, 0)
35 /* COMMAND2 */
36 #define SLINK_CMD2_TXEN			BIT(30)
37 #define SLINK_CMD2_RXEN			BIT(31)
38 #define SLINK_CMD2_SS_EN		BIT(18)
39 #define SLINK_CMD2_SS_EN_SHIFT		18
40 #define SLINK_CMD2_SS_EN_MASK		GENMASK(19, 18)
41 #define SLINK_CMD2_CS_ACTIVE_BETWEEN	BIT(17)
42 /* STATUS */
43 #define SLINK_STAT_BSY			BIT(31)
44 #define SLINK_STAT_RDY			BIT(30)
45 #define SLINK_STAT_ERR			BIT(29)
46 #define SLINK_STAT_RXF_FLUSH		BIT(27)
47 #define SLINK_STAT_TXF_FLUSH		BIT(26)
48 #define SLINK_STAT_RXF_OVF		BIT(25)
49 #define SLINK_STAT_TXF_UNR		BIT(24)
50 #define SLINK_STAT_RXF_EMPTY		BIT(23)
51 #define SLINK_STAT_RXF_FULL		BIT(22)
52 #define SLINK_STAT_TXF_EMPTY		BIT(21)
53 #define SLINK_STAT_TXF_FULL		BIT(20)
54 #define SLINK_STAT_TXF_OVF		BIT(19)
55 #define SLINK_STAT_RXF_UNR		BIT(18)
56 #define SLINK_STAT_CUR_BLKCNT		BIT(15)
57 /* STATUS2 */
58 #define SLINK_STAT2_RXF_FULL_CNT	BIT(16)
59 #define SLINK_STAT2_TXF_FULL_CNT	BIT(0)
60 
61 #define SPI_TIMEOUT		1000
62 #define TEGRA_SPI_MAX_FREQ	52000000
63 
64 struct spi_regs {
65 	u32 command;	/* SLINK_COMMAND_0 register  */
66 	u32 command2;	/* SLINK_COMMAND2_0 reg */
67 	u32 status;	/* SLINK_STATUS_0 register */
68 	u32 reserved;	/* Reserved offset 0C */
69 	u32 mas_data;	/* SLINK_MAS_DATA_0 reg */
70 	u32 slav_data;	/* SLINK_SLAVE_DATA_0 reg */
71 	u32 dma_ctl;	/* SLINK_DMA_CTL_0 register */
72 	u32 status2;	/* SLINK_STATUS2_0 reg */
73 	u32 rsvd[56];	/* 0x20 to 0xFF reserved */
74 	u32 tx_fifo;	/* SLINK_TX_FIFO_0 reg off 100h */
75 	u32 rsvd2[31];	/* 0x104 to 0x17F reserved */
76 	u32 rx_fifo;	/* SLINK_RX_FIFO_0 reg off 180h */
77 };
78 
79 struct tegra30_spi_priv {
80 	struct spi_regs *regs;
81 	unsigned int freq;
82 	unsigned int mode;
83 	int periph_id;
84 	int valid;
85 	int last_transaction_us;
86 };
87 
88 struct tegra_spi_slave {
89 	struct spi_slave slave;
90 	struct tegra30_spi_priv *ctrl;
91 };
92 
93 static int tegra30_spi_ofdata_to_platdata(struct udevice *bus)
94 {
95 	struct tegra_spi_platdata *plat = bus->platdata;
96 	const void *blob = gd->fdt_blob;
97 	int node = dev_of_offset(bus);
98 
99 	plat->base = devfdt_get_addr(bus);
100 	plat->periph_id = clock_decode_periph_id(bus);
101 
102 	if (plat->periph_id == PERIPH_ID_NONE) {
103 		debug("%s: could not decode periph id %d\n", __func__,
104 		      plat->periph_id);
105 		return -FDT_ERR_NOTFOUND;
106 	}
107 
108 	/* Use 500KHz as a suitable default */
109 	plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
110 					500000);
111 	plat->deactivate_delay_us = fdtdec_get_int(blob, node,
112 					"spi-deactivate-delay", 0);
113 	debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d, deactivate_delay=%d\n",
114 	      __func__, plat->base, plat->periph_id, plat->frequency,
115 	      plat->deactivate_delay_us);
116 
117 	return 0;
118 }
119 
120 static int tegra30_spi_probe(struct udevice *bus)
121 {
122 	struct tegra_spi_platdata *plat = dev_get_platdata(bus);
123 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
124 
125 	priv->regs = (struct spi_regs *)plat->base;
126 
127 	priv->last_transaction_us = timer_get_us();
128 	priv->freq = plat->frequency;
129 	priv->periph_id = plat->periph_id;
130 
131 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
132 	clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
133 			       priv->freq);
134 
135 	return 0;
136 }
137 
138 static int tegra30_spi_claim_bus(struct udevice *dev)
139 {
140 	struct udevice *bus = dev->parent;
141 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
142 	struct spi_regs *regs = priv->regs;
143 	u32 reg;
144 
145 	/* Change SPI clock to correct frequency, PLLP_OUT0 source */
146 	clock_start_periph_pll(priv->periph_id, CLOCK_ID_PERIPH,
147 			       priv->freq);
148 
149 	/* Clear stale status here */
150 	reg = SLINK_STAT_RDY | SLINK_STAT_RXF_FLUSH | SLINK_STAT_TXF_FLUSH | \
151 		SLINK_STAT_RXF_UNR | SLINK_STAT_TXF_OVF;
152 	writel(reg, &regs->status);
153 	debug("%s: STATUS = %08x\n", __func__, readl(&regs->status));
154 
155 	/* Set master mode and sw controlled CS */
156 	reg = readl(&regs->command);
157 	reg |= SLINK_CMD_M_S | SLINK_CMD_CS_SOFT;
158 	writel(reg, &regs->command);
159 	debug("%s: COMMAND = %08x\n", __func__, readl(&regs->command));
160 
161 	return 0;
162 }
163 
164 static void spi_cs_activate(struct udevice *dev)
165 {
166 	struct udevice *bus = dev->parent;
167 	struct tegra_spi_platdata *pdata = dev_get_platdata(bus);
168 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
169 
170 	/* If it's too soon to do another transaction, wait */
171 	if (pdata->deactivate_delay_us &&
172 	    priv->last_transaction_us) {
173 		ulong delay_us;		/* The delay completed so far */
174 		delay_us = timer_get_us() - priv->last_transaction_us;
175 		if (delay_us < pdata->deactivate_delay_us)
176 			udelay(pdata->deactivate_delay_us - delay_us);
177 	}
178 
179 	/* CS is negated on Tegra, so drive a 1 to get a 0 */
180 	setbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL);
181 }
182 
183 static void spi_cs_deactivate(struct udevice *dev)
184 {
185 	struct udevice *bus = dev->parent;
186 	struct tegra_spi_platdata *pdata = dev_get_platdata(bus);
187 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
188 
189 	/* CS is negated on Tegra, so drive a 0 to get a 1 */
190 	clrbits_le32(&priv->regs->command, SLINK_CMD_CS_VAL);
191 
192 	/* Remember time of this transaction so we can honour the bus delay */
193 	if (pdata->deactivate_delay_us)
194 		priv->last_transaction_us = timer_get_us();
195 }
196 
197 static int tegra30_spi_xfer(struct udevice *dev, unsigned int bitlen,
198 			    const void *data_out, void *data_in,
199 			    unsigned long flags)
200 {
201 	struct udevice *bus = dev->parent;
202 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
203 	struct spi_regs *regs = priv->regs;
204 	u32 reg, tmpdout, tmpdin = 0;
205 	const u8 *dout = data_out;
206 	u8 *din = data_in;
207 	int num_bytes;
208 	int ret;
209 
210 	debug("%s: slave %u:%u dout %p din %p bitlen %u\n",
211 	      __func__, bus->seq, spi_chip_select(dev), dout, din, bitlen);
212 	if (bitlen % 8)
213 		return -1;
214 	num_bytes = bitlen / 8;
215 
216 	ret = 0;
217 
218 	reg = readl(&regs->status);
219 	writel(reg, &regs->status);	/* Clear all SPI events via R/W */
220 	debug("%s entry: STATUS = %08x\n", __func__, reg);
221 
222 	reg = readl(&regs->status2);
223 	writel(reg, &regs->status2);	/* Clear all STATUS2 events via R/W */
224 	debug("%s entry: STATUS2 = %08x\n", __func__, reg);
225 
226 	debug("%s entry: COMMAND = %08x\n", __func__, readl(&regs->command));
227 
228 	clrsetbits_le32(&regs->command2, SLINK_CMD2_SS_EN_MASK,
229 			SLINK_CMD2_TXEN | SLINK_CMD2_RXEN |
230 			(spi_chip_select(dev) << SLINK_CMD2_SS_EN_SHIFT));
231 	debug("%s entry: COMMAND2 = %08x\n", __func__, readl(&regs->command2));
232 
233 	if (flags & SPI_XFER_BEGIN)
234 		spi_cs_activate(dev);
235 
236 	/* handle data in 32-bit chunks */
237 	while (num_bytes > 0) {
238 		int bytes;
239 		int is_read = 0;
240 		int tm, i;
241 
242 		tmpdout = 0;
243 		bytes = (num_bytes > 4) ?  4 : num_bytes;
244 
245 		if (dout != NULL) {
246 			for (i = 0; i < bytes; ++i)
247 				tmpdout = (tmpdout << 8) | dout[i];
248 			dout += bytes;
249 		}
250 
251 		num_bytes -= bytes;
252 
253 		clrsetbits_le32(&regs->command, SLINK_CMD_BIT_LENGTH_MASK,
254 				bytes * 8 - 1);
255 		writel(tmpdout, &regs->tx_fifo);
256 		setbits_le32(&regs->command, SLINK_CMD_GO);
257 
258 		/*
259 		 * Wait for SPI transmit FIFO to empty, or to time out.
260 		 * The RX FIFO status will be read and cleared last
261 		 */
262 		for (tm = 0, is_read = 0; tm < SPI_TIMEOUT; ++tm) {
263 			u32 status;
264 
265 			status = readl(&regs->status);
266 
267 			/* We can exit when we've had both RX and TX activity */
268 			if (is_read && (status & SLINK_STAT_TXF_EMPTY))
269 				break;
270 
271 			if ((status & (SLINK_STAT_BSY | SLINK_STAT_RDY)) !=
272 					SLINK_STAT_RDY)
273 				tm++;
274 
275 			else if (!(status & SLINK_STAT_RXF_EMPTY)) {
276 				tmpdin = readl(&regs->rx_fifo);
277 				is_read = 1;
278 
279 				/* swap bytes read in */
280 				if (din != NULL) {
281 					for (i = bytes - 1; i >= 0; --i) {
282 						din[i] = tmpdin & 0xff;
283 						tmpdin >>= 8;
284 					}
285 					din += bytes;
286 				}
287 			}
288 		}
289 
290 		if (tm >= SPI_TIMEOUT)
291 			ret = tm;
292 
293 		/* clear ACK RDY, etc. bits */
294 		writel(readl(&regs->status), &regs->status);
295 	}
296 
297 	if (flags & SPI_XFER_END)
298 		spi_cs_deactivate(dev);
299 
300 	debug("%s: transfer ended. Value=%08x, status = %08x\n",
301 	      __func__, tmpdin, readl(&regs->status));
302 
303 	if (ret) {
304 		printf("%s: timeout during SPI transfer, tm %d\n",
305 		       __func__, ret);
306 		return -1;
307 	}
308 
309 	return 0;
310 }
311 
312 static int tegra30_spi_set_speed(struct udevice *bus, uint speed)
313 {
314 	struct tegra_spi_platdata *plat = bus->platdata;
315 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
316 
317 	if (speed > plat->frequency)
318 		speed = plat->frequency;
319 	priv->freq = speed;
320 	debug("%s: regs=%p, speed=%d\n", __func__, priv->regs, priv->freq);
321 
322 	return 0;
323 }
324 
325 static int tegra30_spi_set_mode(struct udevice *bus, uint mode)
326 {
327 	struct tegra30_spi_priv *priv = dev_get_priv(bus);
328 	struct spi_regs *regs = priv->regs;
329 	u32 reg;
330 
331 	reg = readl(&regs->command);
332 
333 	/* Set CPOL and CPHA */
334 	reg &= ~(SLINK_CMD_IDLE_SCLK_MASK | SLINK_CMD_CK_SDA);
335 	if (mode & SPI_CPHA)
336 		reg |= SLINK_CMD_CK_SDA;
337 
338 	if (mode & SPI_CPOL)
339 		reg |= SLINK_CMD_IDLE_SCLK_DRIVE_HIGH;
340 	else
341 		reg |= SLINK_CMD_IDLE_SCLK_DRIVE_LOW;
342 
343 	writel(reg, &regs->command);
344 
345 	priv->mode = mode;
346 	debug("%s: regs=%p, mode=%d\n", __func__, priv->regs, priv->mode);
347 
348 	return 0;
349 }
350 
351 static const struct dm_spi_ops tegra30_spi_ops = {
352 	.claim_bus	= tegra30_spi_claim_bus,
353 	.xfer		= tegra30_spi_xfer,
354 	.set_speed	= tegra30_spi_set_speed,
355 	.set_mode	= tegra30_spi_set_mode,
356 	/*
357 	 * cs_info is not needed, since we require all chip selects to be
358 	 * in the device tree explicitly
359 	 */
360 };
361 
362 static const struct udevice_id tegra30_spi_ids[] = {
363 	{ .compatible = "nvidia,tegra20-slink" },
364 	{ }
365 };
366 
367 U_BOOT_DRIVER(tegra30_spi) = {
368 	.name	= "tegra20_slink",
369 	.id	= UCLASS_SPI,
370 	.of_match = tegra30_spi_ids,
371 	.ops	= &tegra30_spi_ops,
372 	.ofdata_to_platdata = tegra30_spi_ofdata_to_platdata,
373 	.platdata_auto_alloc_size = sizeof(struct tegra_spi_platdata),
374 	.priv_auto_alloc_size = sizeof(struct tegra30_spi_priv),
375 	.probe	= tegra30_spi_probe,
376 };
377