xref: /openbmc/u-boot/drivers/spi/stm32_qspi.c (revision 747778cf)
1 /*
2  * (C) Copyright 2016
3  *
4  * Michael Kurz, <michi.kurz@gmail.com>
5  *
6  * STM32 QSPI driver
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <malloc.h>
13 #include <spi.h>
14 #include <spi_flash.h>
15 #include <asm/io.h>
16 #include <dm.h>
17 #include <errno.h>
18 #include <asm/arch/stm32.h>
19 #include <asm/arch/stm32_defs.h>
20 #include <clk.h>
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 struct stm32_qspi_regs {
25 	u32 cr;		/* 0x00 */
26 	u32 dcr;	/* 0x04 */
27 	u32 sr;		/* 0x08 */
28 	u32 fcr;	/* 0x0C */
29 	u32 dlr;	/* 0x10 */
30 	u32 ccr;	/* 0x14 */
31 	u32 ar;		/* 0x18 */
32 	u32 abr;	/* 0x1C */
33 	u32 dr;		/* 0x20 */
34 	u32 psmkr;	/* 0x24 */
35 	u32 psmar;	/* 0x28 */
36 	u32 pir;	/* 0x2C */
37 	u32 lptr;	/* 0x30 */
38 };
39 
40 /*
41  * QUADSPI control register
42  */
43 #define STM32_QSPI_CR_EN		BIT(0)
44 #define STM32_QSPI_CR_ABORT		BIT(1)
45 #define STM32_QSPI_CR_DMAEN		BIT(2)
46 #define STM32_QSPI_CR_TCEN		BIT(3)
47 #define STM32_QSPI_CR_SSHIFT		BIT(4)
48 #define STM32_QSPI_CR_DFM		BIT(6)
49 #define STM32_QSPI_CR_FSEL		BIT(7)
50 #define STM32_QSPI_CR_FTHRES_MASK	GENMASK(4, 0)
51 #define STM32_QSPI_CR_FTHRES_SHIFT	(8)
52 #define STM32_QSPI_CR_TEIE		BIT(16)
53 #define STM32_QSPI_CR_TCIE		BIT(17)
54 #define STM32_QSPI_CR_FTIE		BIT(18)
55 #define STM32_QSPI_CR_SMIE		BIT(19)
56 #define STM32_QSPI_CR_TOIE		BIT(20)
57 #define STM32_QSPI_CR_APMS		BIT(22)
58 #define STM32_QSPI_CR_PMM		BIT(23)
59 #define STM32_QSPI_CR_PRESCALER_MASK	GENMASK(7, 0)
60 #define STM32_QSPI_CR_PRESCALER_SHIFT	(24)
61 
62 /*
63  * QUADSPI device configuration register
64  */
65 #define STM32_QSPI_DCR_CKMODE		BIT(0)
66 #define STM32_QSPI_DCR_CSHT_MASK	GENMASK(2, 0)
67 #define STM32_QSPI_DCR_CSHT_SHIFT	(8)
68 #define STM32_QSPI_DCR_FSIZE_MASK	GENMASK(4, 0)
69 #define STM32_QSPI_DCR_FSIZE_SHIFT	(16)
70 
71 /*
72  * QUADSPI status register
73  */
74 #define STM32_QSPI_SR_TEF		BIT(0)
75 #define STM32_QSPI_SR_TCF		BIT(1)
76 #define STM32_QSPI_SR_FTF		BIT(2)
77 #define STM32_QSPI_SR_SMF		BIT(3)
78 #define STM32_QSPI_SR_TOF		BIT(4)
79 #define STM32_QSPI_SR_BUSY		BIT(5)
80 #define STM32_QSPI_SR_FLEVEL_MASK	GENMASK(5, 0)
81 #define STM32_QSPI_SR_FLEVEL_SHIFT	(8)
82 
83 /*
84  * QUADSPI flag clear register
85  */
86 #define STM32_QSPI_FCR_CTEF		BIT(0)
87 #define STM32_QSPI_FCR_CTCF		BIT(1)
88 #define STM32_QSPI_FCR_CSMF		BIT(3)
89 #define STM32_QSPI_FCR_CTOF		BIT(4)
90 
91 /*
92  * QUADSPI communication configuration register
93  */
94 #define STM32_QSPI_CCR_DDRM		BIT(31)
95 #define STM32_QSPI_CCR_DHHC		BIT(30)
96 #define STM32_QSPI_CCR_SIOO		BIT(28)
97 #define STM32_QSPI_CCR_FMODE_SHIFT	(26)
98 #define STM32_QSPI_CCR_DMODE_SHIFT	(24)
99 #define STM32_QSPI_CCR_DCYC_SHIFT	(18)
100 #define STM32_QSPI_CCR_DCYC_MASK	GENMASK(4, 0)
101 #define STM32_QSPI_CCR_ABSIZE_SHIFT	(16)
102 #define STM32_QSPI_CCR_ABMODE_SHIFT	(14)
103 #define STM32_QSPI_CCR_ADSIZE_SHIFT	(12)
104 #define STM32_QSPI_CCR_ADMODE_SHIFT	(10)
105 #define STM32_QSPI_CCR_IMODE_SHIFT	(8)
106 #define STM32_QSPI_CCR_INSTRUCTION_MASK	GENMASK(7, 0)
107 
108 enum STM32_QSPI_CCR_IMODE {
109 	STM32_QSPI_CCR_IMODE_NONE = 0,
110 	STM32_QSPI_CCR_IMODE_ONE_LINE = 1,
111 	STM32_QSPI_CCR_IMODE_TWO_LINE = 2,
112 	STM32_QSPI_CCR_IMODE_FOUR_LINE = 3,
113 };
114 
115 enum STM32_QSPI_CCR_ADMODE {
116 	STM32_QSPI_CCR_ADMODE_NONE = 0,
117 	STM32_QSPI_CCR_ADMODE_ONE_LINE = 1,
118 	STM32_QSPI_CCR_ADMODE_TWO_LINE = 2,
119 	STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3,
120 };
121 
122 enum STM32_QSPI_CCR_ADSIZE {
123 	STM32_QSPI_CCR_ADSIZE_8BIT = 0,
124 	STM32_QSPI_CCR_ADSIZE_16BIT = 1,
125 	STM32_QSPI_CCR_ADSIZE_24BIT = 2,
126 	STM32_QSPI_CCR_ADSIZE_32BIT = 3,
127 };
128 
129 enum STM32_QSPI_CCR_ABMODE {
130 	STM32_QSPI_CCR_ABMODE_NONE = 0,
131 	STM32_QSPI_CCR_ABMODE_ONE_LINE = 1,
132 	STM32_QSPI_CCR_ABMODE_TWO_LINE = 2,
133 	STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3,
134 };
135 
136 enum STM32_QSPI_CCR_ABSIZE {
137 	STM32_QSPI_CCR_ABSIZE_8BIT = 0,
138 	STM32_QSPI_CCR_ABSIZE_16BIT = 1,
139 	STM32_QSPI_CCR_ABSIZE_24BIT = 2,
140 	STM32_QSPI_CCR_ABSIZE_32BIT = 3,
141 };
142 
143 enum STM32_QSPI_CCR_DMODE {
144 	STM32_QSPI_CCR_DMODE_NONE = 0,
145 	STM32_QSPI_CCR_DMODE_ONE_LINE = 1,
146 	STM32_QSPI_CCR_DMODE_TWO_LINE = 2,
147 	STM32_QSPI_CCR_DMODE_FOUR_LINE = 3,
148 };
149 
150 enum STM32_QSPI_CCR_FMODE {
151 	STM32_QSPI_CCR_IND_WRITE = 0,
152 	STM32_QSPI_CCR_IND_READ = 1,
153 	STM32_QSPI_CCR_AUTO_POLL = 2,
154 	STM32_QSPI_CCR_MEM_MAP = 3,
155 };
156 
157 /* default SCK frequency, unit: HZ */
158 #define STM32_QSPI_DEFAULT_SCK_FREQ 108000000
159 
160 struct stm32_qspi_platdata {
161 	u32 base;
162 	u32 memory_map;
163 	u32 max_hz;
164 };
165 
166 struct stm32_qspi_priv {
167 	struct stm32_qspi_regs *regs;
168 	u32 max_hz;
169 	u32 mode;
170 
171 	u32 command;
172 	u32 address;
173 	u32 dummycycles;
174 #define CMD_HAS_ADR	BIT(24)
175 #define CMD_HAS_DUMMY	BIT(25)
176 #define CMD_HAS_DATA	BIT(26)
177 };
178 
179 static void _stm32_qspi_disable(struct stm32_qspi_priv *priv)
180 {
181 	clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
182 }
183 
184 static void _stm32_qspi_enable(struct stm32_qspi_priv *priv)
185 {
186 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
187 }
188 
189 static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv)
190 {
191 	while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY)
192 		;
193 }
194 
195 static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv)
196 {
197 	while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF))
198 		;
199 }
200 
201 static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv)
202 {
203 	while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF))
204 		;
205 }
206 
207 static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size)
208 {
209 	u32 fsize = fls(size) - 1;
210 	clrsetbits_le32(&priv->regs->dcr,
211 			STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT,
212 			fsize << STM32_QSPI_DCR_FSIZE_SHIFT);
213 }
214 
215 static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv)
216 {
217 	unsigned int ccr_reg = 0;
218 	u8 imode, admode, dmode;
219 	u32 mode = priv->mode;
220 	u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK);
221 
222 	imode = STM32_QSPI_CCR_IMODE_ONE_LINE;
223 	admode = STM32_QSPI_CCR_ADMODE_ONE_LINE;
224 
225 	if (mode & SPI_RX_QUAD) {
226 		dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE;
227 		if (mode & SPI_TX_QUAD) {
228 			imode = STM32_QSPI_CCR_IMODE_FOUR_LINE;
229 			admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE;
230 		}
231 	} else if (mode & SPI_RX_DUAL) {
232 		dmode = STM32_QSPI_CCR_DMODE_TWO_LINE;
233 		if (mode & SPI_TX_DUAL) {
234 			imode = STM32_QSPI_CCR_IMODE_TWO_LINE;
235 			admode = STM32_QSPI_CCR_ADMODE_TWO_LINE;
236 		}
237 	} else {
238 		dmode = STM32_QSPI_CCR_DMODE_ONE_LINE;
239 	}
240 
241 	if (priv->command & CMD_HAS_DATA)
242 		ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT);
243 
244 	if (priv->command & CMD_HAS_DUMMY)
245 		ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK)
246 				<< STM32_QSPI_CCR_DCYC_SHIFT);
247 
248 	if (priv->command & CMD_HAS_ADR) {
249 		ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT
250 				<< STM32_QSPI_CCR_ADSIZE_SHIFT);
251 		ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT);
252 	}
253 	ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT);
254 	ccr_reg |= cmd;
255 	return ccr_reg;
256 }
257 
258 static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv,
259 		struct spi_flash *flash)
260 {
261 	priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA
262 			| CMD_HAS_DUMMY;
263 	priv->dummycycles = flash->dummy_byte * 8;
264 
265 	unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv);
266 	ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT);
267 
268 	_stm32_qspi_wait_for_not_busy(priv);
269 
270 	writel(ccr_reg, &priv->regs->ccr);
271 
272 	priv->dummycycles = 0;
273 }
274 
275 static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv)
276 {
277 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT);
278 }
279 
280 static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv,
281 					u32 length)
282 {
283 	writel(length - 1, &priv->regs->dlr);
284 }
285 
286 static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg)
287 {
288 	writel(cr_reg, &priv->regs->ccr);
289 
290 	if (priv->command & CMD_HAS_ADR)
291 		writel(priv->address, &priv->regs->ar);
292 }
293 
294 static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv,
295 		struct spi_flash *flash, unsigned int bitlen,
296 		const u8 *dout, u8 *din, unsigned long flags)
297 {
298 	unsigned int words = bitlen / 8;
299 
300 	if (flags & SPI_XFER_MMAP) {
301 		_stm32_qspi_enable_mmap(priv, flash);
302 		return 0;
303 	} else if (flags & SPI_XFER_MMAP_END) {
304 		_stm32_qspi_disable_mmap(priv);
305 		return 0;
306 	}
307 
308 	if (bitlen == 0)
309 		return -1;
310 
311 	if (bitlen % 8) {
312 		debug("spi_xfer: Non byte aligned SPI transfer\n");
313 		return -1;
314 	}
315 
316 	if (dout && din) {
317 		debug("spi_xfer: QSPI cannot have data in and data out set\n");
318 		return -1;
319 	}
320 
321 	if (!dout && (flags & SPI_XFER_BEGIN)) {
322 		debug("spi_xfer: QSPI transfer must begin with command\n");
323 		return -1;
324 	}
325 
326 	if (dout) {
327 		if (flags & SPI_XFER_BEGIN) {
328 			/* data is command */
329 			priv->command = dout[0] | CMD_HAS_DATA;
330 			if (words >= 4) {
331 				/* address is here too */
332 				priv->address = (dout[1] << 16) |
333 						(dout[2] << 8) | dout[3];
334 				priv->command |= CMD_HAS_ADR;
335 			}
336 
337 			if (words > 4) {
338 				/* rest is dummy bytes */
339 				priv->dummycycles = (words - 4) * 8;
340 				priv->command |= CMD_HAS_DUMMY;
341 			}
342 
343 			if (flags & SPI_XFER_END) {
344 				/* command without data */
345 				priv->command &= ~(CMD_HAS_DATA);
346 			}
347 		}
348 
349 		if (flags & SPI_XFER_END) {
350 			u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
351 			ccr_reg |= STM32_QSPI_CCR_IND_WRITE
352 					<< STM32_QSPI_CCR_FMODE_SHIFT;
353 
354 			_stm32_qspi_wait_for_not_busy(priv);
355 
356 			if (priv->command & CMD_HAS_DATA)
357 				_stm32_qspi_set_xfer_length(priv, words);
358 
359 			_stm32_qspi_start_xfer(priv, ccr_reg);
360 
361 			debug("%s: write: ccr:0x%08x adr:0x%08x\n",
362 			      __func__, priv->regs->ccr, priv->regs->ar);
363 
364 			if (priv->command & CMD_HAS_DATA) {
365 				_stm32_qspi_wait_for_ftf(priv);
366 
367 				debug("%s: words:%d data:", __func__, words);
368 
369 				int i = 0;
370 				while (words > i) {
371 					writeb(dout[i], &priv->regs->dr);
372 					debug("%02x ", dout[i]);
373 					i++;
374 				}
375 				debug("\n");
376 
377 				_stm32_qspi_wait_for_complete(priv);
378 			} else {
379 				_stm32_qspi_wait_for_not_busy(priv);
380 			}
381 		}
382 	} else if (din) {
383 		u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
384 		ccr_reg |= STM32_QSPI_CCR_IND_READ
385 				<< STM32_QSPI_CCR_FMODE_SHIFT;
386 
387 		_stm32_qspi_wait_for_not_busy(priv);
388 
389 		_stm32_qspi_set_xfer_length(priv, words);
390 
391 		_stm32_qspi_start_xfer(priv, ccr_reg);
392 
393 		debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__,
394 		      priv->regs->ccr, priv->regs->ar, priv->regs->dlr);
395 
396 		debug("%s: data:", __func__);
397 
398 		int i = 0;
399 		while (words > i) {
400 			din[i] = readb(&priv->regs->dr);
401 			debug("%02x ", din[i]);
402 			i++;
403 		}
404 		debug("\n");
405 	}
406 
407 	return 0;
408 }
409 
410 static int stm32_qspi_ofdata_to_platdata(struct udevice *bus)
411 {
412 	struct fdt_resource res_regs, res_mem;
413 	struct stm32_qspi_platdata *plat = bus->platdata;
414 	const void *blob = gd->fdt_blob;
415 	int node = dev_of_offset(bus);
416 	int ret;
417 
418 	ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
419 				     "QuadSPI", &res_regs);
420 	if (ret) {
421 		debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
422 		return -ENOMEM;
423 	}
424 	ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
425 				     "QuadSPI-memory", &res_mem);
426 	if (ret) {
427 		debug("Error: can't get mmap base address(ret = %d)!\n", ret);
428 		return -ENOMEM;
429 	}
430 
431 	plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
432 					STM32_QSPI_DEFAULT_SCK_FREQ);
433 
434 	plat->base = res_regs.start;
435 	plat->memory_map = res_mem.start;
436 
437 	debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n",
438 	      __func__,
439 	      plat->base,
440 	      plat->memory_map,
441 	      plat->max_hz
442 	      );
443 
444 	return 0;
445 }
446 
447 static int stm32_qspi_probe(struct udevice *bus)
448 {
449 	struct stm32_qspi_platdata *plat = dev_get_platdata(bus);
450 	struct stm32_qspi_priv *priv = dev_get_priv(bus);
451 	struct dm_spi_bus *dm_spi_bus;
452 
453 	dm_spi_bus = bus->uclass_priv;
454 
455 	dm_spi_bus->max_hz = plat->max_hz;
456 
457 	priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base;
458 
459 	priv->max_hz = plat->max_hz;
460 
461 #ifdef CONFIG_CLK
462 	int ret;
463 	struct clk clk;
464 	ret = clk_get_by_index(bus, 0, &clk);
465 	if (ret < 0)
466 		return ret;
467 
468 	ret = clk_enable(&clk);
469 
470 	if (ret) {
471 		dev_err(bus, "failed to enable clock\n");
472 		return ret;
473 	}
474 #endif
475 
476 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
477 
478 	return 0;
479 }
480 
481 static int stm32_qspi_remove(struct udevice *bus)
482 {
483 	return 0;
484 }
485 
486 static int stm32_qspi_claim_bus(struct udevice *dev)
487 {
488 	struct stm32_qspi_priv *priv;
489 	struct udevice *bus;
490 	struct spi_flash *flash;
491 
492 	bus = dev->parent;
493 	priv = dev_get_priv(bus);
494 	flash = dev_get_uclass_priv(dev);
495 
496 	_stm32_qspi_set_flash_size(priv, flash->size);
497 
498 	_stm32_qspi_enable(priv);
499 
500 	return 0;
501 }
502 
503 static int stm32_qspi_release_bus(struct udevice *dev)
504 {
505 	struct stm32_qspi_priv *priv;
506 	struct udevice *bus;
507 
508 	bus = dev->parent;
509 	priv = dev_get_priv(bus);
510 
511 	_stm32_qspi_disable(priv);
512 
513 	return 0;
514 }
515 
516 static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen,
517 		const void *dout, void *din, unsigned long flags)
518 {
519 	struct stm32_qspi_priv *priv;
520 	struct udevice *bus;
521 	struct spi_flash *flash;
522 
523 	bus = dev->parent;
524 	priv = dev_get_priv(bus);
525 	flash = dev_get_uclass_priv(dev);
526 
527 	return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout,
528 				(u8 *)din, flags);
529 }
530 
531 static int stm32_qspi_set_speed(struct udevice *bus, uint speed)
532 {
533 	struct stm32_qspi_platdata *plat = bus->platdata;
534 	struct stm32_qspi_priv *priv = dev_get_priv(bus);
535 
536 	if (speed > plat->max_hz)
537 		speed = plat->max_hz;
538 
539 	u32 qspi_clk = clock_get(CLOCK_AHB);
540 	u32 prescaler = 255;
541 	if (speed > 0) {
542 		prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1;
543 		if (prescaler > 255)
544 			prescaler = 255;
545 		else if (prescaler < 0)
546 			prescaler = 0;
547 	}
548 
549 	u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000);
550 	csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK;
551 
552 	_stm32_qspi_wait_for_not_busy(priv);
553 
554 	clrsetbits_le32(&priv->regs->cr,
555 			STM32_QSPI_CR_PRESCALER_MASK <<
556 			STM32_QSPI_CR_PRESCALER_SHIFT,
557 			prescaler << STM32_QSPI_CR_PRESCALER_SHIFT);
558 
559 
560 	clrsetbits_le32(&priv->regs->dcr,
561 			STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT,
562 			csht << STM32_QSPI_DCR_CSHT_SHIFT);
563 
564 	debug("%s: regs=%p, speed=%d\n", __func__, priv->regs,
565 	      (qspi_clk / (prescaler + 1)));
566 
567 	return 0;
568 }
569 
570 static int stm32_qspi_set_mode(struct udevice *bus, uint mode)
571 {
572 	struct stm32_qspi_priv *priv = dev_get_priv(bus);
573 
574 	_stm32_qspi_wait_for_not_busy(priv);
575 
576 	if ((mode & SPI_CPHA) && (mode & SPI_CPOL))
577 		setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
578 	else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL))
579 		clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
580 	else
581 		return -ENODEV;
582 
583 	if (mode & SPI_CS_HIGH)
584 		return -ENODEV;
585 
586 	if (mode & SPI_RX_QUAD)
587 		priv->mode |= SPI_RX_QUAD;
588 	else if (mode & SPI_RX_DUAL)
589 		priv->mode |= SPI_RX_DUAL;
590 	else
591 		priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL);
592 
593 	if (mode & SPI_TX_QUAD)
594 		priv->mode |= SPI_TX_QUAD;
595 	else if (mode & SPI_TX_DUAL)
596 		priv->mode |= SPI_TX_DUAL;
597 	else
598 		priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL);
599 
600 	debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode);
601 
602 	if (mode & SPI_RX_QUAD)
603 		debug("quad, tx: ");
604 	else if (mode & SPI_RX_DUAL)
605 		debug("dual, tx: ");
606 	else
607 		debug("single, tx: ");
608 
609 	if (mode & SPI_TX_QUAD)
610 		debug("quad\n");
611 	else if (mode & SPI_TX_DUAL)
612 		debug("dual\n");
613 	else
614 		debug("single\n");
615 
616 	return 0;
617 }
618 
619 static const struct dm_spi_ops stm32_qspi_ops = {
620 	.claim_bus	= stm32_qspi_claim_bus,
621 	.release_bus	= stm32_qspi_release_bus,
622 	.xfer		= stm32_qspi_xfer,
623 	.set_speed	= stm32_qspi_set_speed,
624 	.set_mode	= stm32_qspi_set_mode,
625 };
626 
627 static const struct udevice_id stm32_qspi_ids[] = {
628 	{ .compatible = "st,stm32-qspi" },
629 	{ }
630 };
631 
632 U_BOOT_DRIVER(stm32_qspi) = {
633 	.name	= "stm32_qspi",
634 	.id	= UCLASS_SPI,
635 	.of_match = stm32_qspi_ids,
636 	.ops	= &stm32_qspi_ops,
637 	.ofdata_to_platdata = stm32_qspi_ofdata_to_platdata,
638 	.platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata),
639 	.priv_auto_alloc_size = sizeof(struct stm32_qspi_priv),
640 	.probe	= stm32_qspi_probe,
641 	.remove = stm32_qspi_remove,
642 };
643