xref: /openbmc/u-boot/drivers/spi/stm32_qspi.c (revision 62269f02)
1 /*
2  * (C) Copyright 2016
3  *
4  * Michael Kurz, <michi.kurz@gmail.com>
5  *
6  * STM32 QSPI driver
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #include <common.h>
12 #include <malloc.h>
13 #include <spi.h>
14 #include <spi_flash.h>
15 #include <asm/io.h>
16 #include <dm.h>
17 #include <errno.h>
18 #include <asm/arch/stm32.h>
19 #include <asm/arch/stm32_defs.h>
20 #include <clk.h>
21 
22 DECLARE_GLOBAL_DATA_PTR;
23 
24 struct stm32_qspi_regs {
25 	u32 cr;		/* 0x00 */
26 	u32 dcr;	/* 0x04 */
27 	u32 sr;		/* 0x08 */
28 	u32 fcr;	/* 0x0C */
29 	u32 dlr;	/* 0x10 */
30 	u32 ccr;	/* 0x14 */
31 	u32 ar;		/* 0x18 */
32 	u32 abr;	/* 0x1C */
33 	u32 dr;		/* 0x20 */
34 	u32 psmkr;	/* 0x24 */
35 	u32 psmar;	/* 0x28 */
36 	u32 pir;	/* 0x2C */
37 	u32 lptr;	/* 0x30 */
38 };
39 
40 /*
41  * QUADSPI control register
42  */
43 #define STM32_QSPI_CR_EN		BIT(0)
44 #define STM32_QSPI_CR_ABORT		BIT(1)
45 #define STM32_QSPI_CR_DMAEN		BIT(2)
46 #define STM32_QSPI_CR_TCEN		BIT(3)
47 #define STM32_QSPI_CR_SSHIFT		BIT(4)
48 #define STM32_QSPI_CR_DFM		BIT(6)
49 #define STM32_QSPI_CR_FSEL		BIT(7)
50 #define STM32_QSPI_CR_FTHRES_MASK	GENMASK(4, 0)
51 #define STM32_QSPI_CR_FTHRES_SHIFT	(8)
52 #define STM32_QSPI_CR_TEIE		BIT(16)
53 #define STM32_QSPI_CR_TCIE		BIT(17)
54 #define STM32_QSPI_CR_FTIE		BIT(18)
55 #define STM32_QSPI_CR_SMIE		BIT(19)
56 #define STM32_QSPI_CR_TOIE		BIT(20)
57 #define STM32_QSPI_CR_APMS		BIT(22)
58 #define STM32_QSPI_CR_PMM		BIT(23)
59 #define STM32_QSPI_CR_PRESCALER_MASK	GENMASK(7, 0)
60 #define STM32_QSPI_CR_PRESCALER_SHIFT	(24)
61 
62 /*
63  * QUADSPI device configuration register
64  */
65 #define STM32_QSPI_DCR_CKMODE		BIT(0)
66 #define STM32_QSPI_DCR_CSHT_MASK	GENMASK(2, 0)
67 #define STM32_QSPI_DCR_CSHT_SHIFT	(8)
68 #define STM32_QSPI_DCR_FSIZE_MASK	GENMASK(4, 0)
69 #define STM32_QSPI_DCR_FSIZE_SHIFT	(16)
70 
71 /*
72  * QUADSPI status register
73  */
74 #define STM32_QSPI_SR_TEF		BIT(0)
75 #define STM32_QSPI_SR_TCF		BIT(1)
76 #define STM32_QSPI_SR_FTF		BIT(2)
77 #define STM32_QSPI_SR_SMF		BIT(3)
78 #define STM32_QSPI_SR_TOF		BIT(4)
79 #define STM32_QSPI_SR_BUSY		BIT(5)
80 #define STM32_QSPI_SR_FLEVEL_MASK	GENMASK(5, 0)
81 #define STM32_QSPI_SR_FLEVEL_SHIFT	(8)
82 
83 /*
84  * QUADSPI flag clear register
85  */
86 #define STM32_QSPI_FCR_CTEF		BIT(0)
87 #define STM32_QSPI_FCR_CTCF		BIT(1)
88 #define STM32_QSPI_FCR_CSMF		BIT(3)
89 #define STM32_QSPI_FCR_CTOF		BIT(4)
90 
91 /*
92  * QUADSPI communication configuration register
93  */
94 #define STM32_QSPI_CCR_DDRM		BIT(31)
95 #define STM32_QSPI_CCR_DHHC		BIT(30)
96 #define STM32_QSPI_CCR_SIOO		BIT(28)
97 #define STM32_QSPI_CCR_FMODE_SHIFT	(26)
98 #define STM32_QSPI_CCR_DMODE_SHIFT	(24)
99 #define STM32_QSPI_CCR_DCYC_SHIFT	(18)
100 #define STM32_QSPI_CCR_DCYC_MASK	GENMASK(4, 0)
101 #define STM32_QSPI_CCR_ABSIZE_SHIFT	(16)
102 #define STM32_QSPI_CCR_ABMODE_SHIFT	(14)
103 #define STM32_QSPI_CCR_ADSIZE_SHIFT	(12)
104 #define STM32_QSPI_CCR_ADMODE_SHIFT	(10)
105 #define STM32_QSPI_CCR_IMODE_SHIFT	(8)
106 #define STM32_QSPI_CCR_INSTRUCTION_MASK	GENMASK(7, 0)
107 
108 enum STM32_QSPI_CCR_IMODE {
109 	STM32_QSPI_CCR_IMODE_NONE = 0,
110 	STM32_QSPI_CCR_IMODE_ONE_LINE = 1,
111 	STM32_QSPI_CCR_IMODE_TWO_LINE = 2,
112 	STM32_QSPI_CCR_IMODE_FOUR_LINE = 3,
113 };
114 
115 enum STM32_QSPI_CCR_ADMODE {
116 	STM32_QSPI_CCR_ADMODE_NONE = 0,
117 	STM32_QSPI_CCR_ADMODE_ONE_LINE = 1,
118 	STM32_QSPI_CCR_ADMODE_TWO_LINE = 2,
119 	STM32_QSPI_CCR_ADMODE_FOUR_LINE = 3,
120 };
121 
122 enum STM32_QSPI_CCR_ADSIZE {
123 	STM32_QSPI_CCR_ADSIZE_8BIT = 0,
124 	STM32_QSPI_CCR_ADSIZE_16BIT = 1,
125 	STM32_QSPI_CCR_ADSIZE_24BIT = 2,
126 	STM32_QSPI_CCR_ADSIZE_32BIT = 3,
127 };
128 
129 enum STM32_QSPI_CCR_ABMODE {
130 	STM32_QSPI_CCR_ABMODE_NONE = 0,
131 	STM32_QSPI_CCR_ABMODE_ONE_LINE = 1,
132 	STM32_QSPI_CCR_ABMODE_TWO_LINE = 2,
133 	STM32_QSPI_CCR_ABMODE_FOUR_LINE = 3,
134 };
135 
136 enum STM32_QSPI_CCR_ABSIZE {
137 	STM32_QSPI_CCR_ABSIZE_8BIT = 0,
138 	STM32_QSPI_CCR_ABSIZE_16BIT = 1,
139 	STM32_QSPI_CCR_ABSIZE_24BIT = 2,
140 	STM32_QSPI_CCR_ABSIZE_32BIT = 3,
141 };
142 
143 enum STM32_QSPI_CCR_DMODE {
144 	STM32_QSPI_CCR_DMODE_NONE = 0,
145 	STM32_QSPI_CCR_DMODE_ONE_LINE = 1,
146 	STM32_QSPI_CCR_DMODE_TWO_LINE = 2,
147 	STM32_QSPI_CCR_DMODE_FOUR_LINE = 3,
148 };
149 
150 enum STM32_QSPI_CCR_FMODE {
151 	STM32_QSPI_CCR_IND_WRITE = 0,
152 	STM32_QSPI_CCR_IND_READ = 1,
153 	STM32_QSPI_CCR_AUTO_POLL = 2,
154 	STM32_QSPI_CCR_MEM_MAP = 3,
155 };
156 
157 /* default SCK frequency, unit: HZ */
158 #define STM32_QSPI_DEFAULT_SCK_FREQ 108000000
159 
160 struct stm32_qspi_platdata {
161 	u32 base;
162 	u32 memory_map;
163 	u32 max_hz;
164 };
165 
166 struct stm32_qspi_priv {
167 	struct stm32_qspi_regs *regs;
168 	ulong clock_rate;
169 	u32 max_hz;
170 	u32 mode;
171 
172 	u32 command;
173 	u32 address;
174 	u32 dummycycles;
175 #define CMD_HAS_ADR	BIT(24)
176 #define CMD_HAS_DUMMY	BIT(25)
177 #define CMD_HAS_DATA	BIT(26)
178 };
179 
180 static void _stm32_qspi_disable(struct stm32_qspi_priv *priv)
181 {
182 	clrbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
183 }
184 
185 static void _stm32_qspi_enable(struct stm32_qspi_priv *priv)
186 {
187 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_EN);
188 }
189 
190 static void _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv)
191 {
192 	while (readl(&priv->regs->sr) & STM32_QSPI_SR_BUSY)
193 		;
194 }
195 
196 static void _stm32_qspi_wait_for_complete(struct stm32_qspi_priv *priv)
197 {
198 	while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_TCF))
199 		;
200 }
201 
202 static void _stm32_qspi_wait_for_ftf(struct stm32_qspi_priv *priv)
203 {
204 	while (!(readl(&priv->regs->sr) & STM32_QSPI_SR_FTF))
205 		;
206 }
207 
208 static void _stm32_qspi_set_flash_size(struct stm32_qspi_priv *priv, u32 size)
209 {
210 	u32 fsize = fls(size) - 1;
211 	clrsetbits_le32(&priv->regs->dcr,
212 			STM32_QSPI_DCR_FSIZE_MASK << STM32_QSPI_DCR_FSIZE_SHIFT,
213 			fsize << STM32_QSPI_DCR_FSIZE_SHIFT);
214 }
215 
216 static unsigned int _stm32_qspi_gen_ccr(struct stm32_qspi_priv *priv)
217 {
218 	unsigned int ccr_reg = 0;
219 	u8 imode, admode, dmode;
220 	u32 mode = priv->mode;
221 	u32 cmd = (priv->command & STM32_QSPI_CCR_INSTRUCTION_MASK);
222 
223 	imode = STM32_QSPI_CCR_IMODE_ONE_LINE;
224 	admode = STM32_QSPI_CCR_ADMODE_ONE_LINE;
225 
226 	if (mode & SPI_RX_QUAD) {
227 		dmode = STM32_QSPI_CCR_DMODE_FOUR_LINE;
228 		if (mode & SPI_TX_QUAD) {
229 			imode = STM32_QSPI_CCR_IMODE_FOUR_LINE;
230 			admode = STM32_QSPI_CCR_ADMODE_FOUR_LINE;
231 		}
232 	} else if (mode & SPI_RX_DUAL) {
233 		dmode = STM32_QSPI_CCR_DMODE_TWO_LINE;
234 		if (mode & SPI_TX_DUAL) {
235 			imode = STM32_QSPI_CCR_IMODE_TWO_LINE;
236 			admode = STM32_QSPI_CCR_ADMODE_TWO_LINE;
237 		}
238 	} else {
239 		dmode = STM32_QSPI_CCR_DMODE_ONE_LINE;
240 	}
241 
242 	if (priv->command & CMD_HAS_DATA)
243 		ccr_reg |= (dmode << STM32_QSPI_CCR_DMODE_SHIFT);
244 
245 	if (priv->command & CMD_HAS_DUMMY)
246 		ccr_reg |= ((priv->dummycycles & STM32_QSPI_CCR_DCYC_MASK)
247 				<< STM32_QSPI_CCR_DCYC_SHIFT);
248 
249 	if (priv->command & CMD_HAS_ADR) {
250 		ccr_reg |= (STM32_QSPI_CCR_ADSIZE_24BIT
251 				<< STM32_QSPI_CCR_ADSIZE_SHIFT);
252 		ccr_reg |= (admode << STM32_QSPI_CCR_ADMODE_SHIFT);
253 	}
254 	ccr_reg |= (imode << STM32_QSPI_CCR_IMODE_SHIFT);
255 	ccr_reg |= cmd;
256 	return ccr_reg;
257 }
258 
259 static void _stm32_qspi_enable_mmap(struct stm32_qspi_priv *priv,
260 		struct spi_flash *flash)
261 {
262 	priv->command = flash->read_cmd | CMD_HAS_ADR | CMD_HAS_DATA
263 			| CMD_HAS_DUMMY;
264 	priv->dummycycles = flash->dummy_byte * 8;
265 
266 	unsigned int ccr_reg = _stm32_qspi_gen_ccr(priv);
267 	ccr_reg |= (STM32_QSPI_CCR_MEM_MAP << STM32_QSPI_CCR_FMODE_SHIFT);
268 
269 	_stm32_qspi_wait_for_not_busy(priv);
270 
271 	writel(ccr_reg, &priv->regs->ccr);
272 
273 	priv->dummycycles = 0;
274 }
275 
276 static void _stm32_qspi_disable_mmap(struct stm32_qspi_priv *priv)
277 {
278 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_ABORT);
279 }
280 
281 static void _stm32_qspi_set_xfer_length(struct stm32_qspi_priv *priv,
282 					u32 length)
283 {
284 	writel(length - 1, &priv->regs->dlr);
285 }
286 
287 static void _stm32_qspi_start_xfer(struct stm32_qspi_priv *priv, u32 cr_reg)
288 {
289 	writel(cr_reg, &priv->regs->ccr);
290 
291 	if (priv->command & CMD_HAS_ADR)
292 		writel(priv->address, &priv->regs->ar);
293 }
294 
295 static int _stm32_qspi_xfer(struct stm32_qspi_priv *priv,
296 		struct spi_flash *flash, unsigned int bitlen,
297 		const u8 *dout, u8 *din, unsigned long flags)
298 {
299 	unsigned int words = bitlen / 8;
300 
301 	if (flags & SPI_XFER_MMAP) {
302 		_stm32_qspi_enable_mmap(priv, flash);
303 		return 0;
304 	} else if (flags & SPI_XFER_MMAP_END) {
305 		_stm32_qspi_disable_mmap(priv);
306 		return 0;
307 	}
308 
309 	if (bitlen == 0)
310 		return -1;
311 
312 	if (bitlen % 8) {
313 		debug("spi_xfer: Non byte aligned SPI transfer\n");
314 		return -1;
315 	}
316 
317 	if (dout && din) {
318 		debug("spi_xfer: QSPI cannot have data in and data out set\n");
319 		return -1;
320 	}
321 
322 	if (!dout && (flags & SPI_XFER_BEGIN)) {
323 		debug("spi_xfer: QSPI transfer must begin with command\n");
324 		return -1;
325 	}
326 
327 	if (dout) {
328 		if (flags & SPI_XFER_BEGIN) {
329 			/* data is command */
330 			priv->command = dout[0] | CMD_HAS_DATA;
331 			if (words >= 4) {
332 				/* address is here too */
333 				priv->address = (dout[1] << 16) |
334 						(dout[2] << 8) | dout[3];
335 				priv->command |= CMD_HAS_ADR;
336 			}
337 
338 			if (words > 4) {
339 				/* rest is dummy bytes */
340 				priv->dummycycles = (words - 4) * 8;
341 				priv->command |= CMD_HAS_DUMMY;
342 			}
343 
344 			if (flags & SPI_XFER_END) {
345 				/* command without data */
346 				priv->command &= ~(CMD_HAS_DATA);
347 			}
348 		}
349 
350 		if (flags & SPI_XFER_END) {
351 			u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
352 			ccr_reg |= STM32_QSPI_CCR_IND_WRITE
353 					<< STM32_QSPI_CCR_FMODE_SHIFT;
354 
355 			_stm32_qspi_wait_for_not_busy(priv);
356 
357 			if (priv->command & CMD_HAS_DATA)
358 				_stm32_qspi_set_xfer_length(priv, words);
359 
360 			_stm32_qspi_start_xfer(priv, ccr_reg);
361 
362 			debug("%s: write: ccr:0x%08x adr:0x%08x\n",
363 			      __func__, priv->regs->ccr, priv->regs->ar);
364 
365 			if (priv->command & CMD_HAS_DATA) {
366 				_stm32_qspi_wait_for_ftf(priv);
367 
368 				debug("%s: words:%d data:", __func__, words);
369 
370 				int i = 0;
371 				while (words > i) {
372 					writeb(dout[i], &priv->regs->dr);
373 					debug("%02x ", dout[i]);
374 					i++;
375 				}
376 				debug("\n");
377 
378 				_stm32_qspi_wait_for_complete(priv);
379 			} else {
380 				_stm32_qspi_wait_for_not_busy(priv);
381 			}
382 		}
383 	} else if (din) {
384 		u32 ccr_reg = _stm32_qspi_gen_ccr(priv);
385 		ccr_reg |= STM32_QSPI_CCR_IND_READ
386 				<< STM32_QSPI_CCR_FMODE_SHIFT;
387 
388 		_stm32_qspi_wait_for_not_busy(priv);
389 
390 		_stm32_qspi_set_xfer_length(priv, words);
391 
392 		_stm32_qspi_start_xfer(priv, ccr_reg);
393 
394 		debug("%s: read: ccr:0x%08x adr:0x%08x len:%d\n", __func__,
395 		      priv->regs->ccr, priv->regs->ar, priv->regs->dlr);
396 
397 		debug("%s: data:", __func__);
398 
399 		int i = 0;
400 		while (words > i) {
401 			din[i] = readb(&priv->regs->dr);
402 			debug("%02x ", din[i]);
403 			i++;
404 		}
405 		debug("\n");
406 	}
407 
408 	return 0;
409 }
410 
411 static int stm32_qspi_ofdata_to_platdata(struct udevice *bus)
412 {
413 	struct fdt_resource res_regs, res_mem;
414 	struct stm32_qspi_platdata *plat = bus->platdata;
415 	const void *blob = gd->fdt_blob;
416 	int node = dev_of_offset(bus);
417 	int ret;
418 
419 	ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
420 				     "QuadSPI", &res_regs);
421 	if (ret) {
422 		debug("Error: can't get regs base addresses(ret = %d)!\n", ret);
423 		return -ENOMEM;
424 	}
425 	ret = fdt_get_named_resource(blob, node, "reg", "reg-names",
426 				     "QuadSPI-memory", &res_mem);
427 	if (ret) {
428 		debug("Error: can't get mmap base address(ret = %d)!\n", ret);
429 		return -ENOMEM;
430 	}
431 
432 	plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
433 					STM32_QSPI_DEFAULT_SCK_FREQ);
434 
435 	plat->base = res_regs.start;
436 	plat->memory_map = res_mem.start;
437 
438 	debug("%s: regs=<0x%x> mapped=<0x%x>, max-frequency=%d\n",
439 	      __func__,
440 	      plat->base,
441 	      plat->memory_map,
442 	      plat->max_hz
443 	      );
444 
445 	return 0;
446 }
447 
448 static int stm32_qspi_probe(struct udevice *bus)
449 {
450 	struct stm32_qspi_platdata *plat = dev_get_platdata(bus);
451 	struct stm32_qspi_priv *priv = dev_get_priv(bus);
452 	struct dm_spi_bus *dm_spi_bus;
453 
454 	dm_spi_bus = bus->uclass_priv;
455 
456 	dm_spi_bus->max_hz = plat->max_hz;
457 
458 	priv->regs = (struct stm32_qspi_regs *)(uintptr_t)plat->base;
459 
460 	priv->max_hz = plat->max_hz;
461 
462 #ifdef CONFIG_CLK
463 	int ret;
464 	struct clk clk;
465 	ret = clk_get_by_index(bus, 0, &clk);
466 	if (ret < 0)
467 		return ret;
468 
469 	ret = clk_enable(&clk);
470 
471 	if (ret) {
472 		dev_err(bus, "failed to enable clock\n");
473 		return ret;
474 	}
475 
476 	priv->clock_rate = clk_get_rate(&clk);
477 	if (priv->clock_rate < 0) {
478 		clk_disable(&clk);
479 		return priv->clock_rate;
480 	}
481 
482 #endif
483 
484 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
485 
486 	return 0;
487 }
488 
489 static int stm32_qspi_remove(struct udevice *bus)
490 {
491 	return 0;
492 }
493 
494 static int stm32_qspi_claim_bus(struct udevice *dev)
495 {
496 	struct stm32_qspi_priv *priv;
497 	struct udevice *bus;
498 	struct spi_flash *flash;
499 
500 	bus = dev->parent;
501 	priv = dev_get_priv(bus);
502 	flash = dev_get_uclass_priv(dev);
503 
504 	_stm32_qspi_set_flash_size(priv, flash->size);
505 
506 	_stm32_qspi_enable(priv);
507 
508 	return 0;
509 }
510 
511 static int stm32_qspi_release_bus(struct udevice *dev)
512 {
513 	struct stm32_qspi_priv *priv;
514 	struct udevice *bus;
515 
516 	bus = dev->parent;
517 	priv = dev_get_priv(bus);
518 
519 	_stm32_qspi_disable(priv);
520 
521 	return 0;
522 }
523 
524 static int stm32_qspi_xfer(struct udevice *dev, unsigned int bitlen,
525 		const void *dout, void *din, unsigned long flags)
526 {
527 	struct stm32_qspi_priv *priv;
528 	struct udevice *bus;
529 	struct spi_flash *flash;
530 
531 	bus = dev->parent;
532 	priv = dev_get_priv(bus);
533 	flash = dev_get_uclass_priv(dev);
534 
535 	return _stm32_qspi_xfer(priv, flash, bitlen, (const u8 *)dout,
536 				(u8 *)din, flags);
537 }
538 
539 static int stm32_qspi_set_speed(struct udevice *bus, uint speed)
540 {
541 	struct stm32_qspi_platdata *plat = bus->platdata;
542 	struct stm32_qspi_priv *priv = dev_get_priv(bus);
543 
544 	if (speed > plat->max_hz)
545 		speed = plat->max_hz;
546 
547 	u32 qspi_clk = priv->clock_rate;
548 	u32 prescaler = 255;
549 	if (speed > 0) {
550 		prescaler = DIV_ROUND_UP(qspi_clk, speed) - 1;
551 		if (prescaler > 255)
552 			prescaler = 255;
553 		else if (prescaler < 0)
554 			prescaler = 0;
555 	}
556 
557 	u32 csht = DIV_ROUND_UP((5 * qspi_clk) / (prescaler + 1), 100000000);
558 	csht = (csht - 1) & STM32_QSPI_DCR_CSHT_MASK;
559 
560 	_stm32_qspi_wait_for_not_busy(priv);
561 
562 	clrsetbits_le32(&priv->regs->cr,
563 			STM32_QSPI_CR_PRESCALER_MASK <<
564 			STM32_QSPI_CR_PRESCALER_SHIFT,
565 			prescaler << STM32_QSPI_CR_PRESCALER_SHIFT);
566 
567 
568 	clrsetbits_le32(&priv->regs->dcr,
569 			STM32_QSPI_DCR_CSHT_MASK << STM32_QSPI_DCR_CSHT_SHIFT,
570 			csht << STM32_QSPI_DCR_CSHT_SHIFT);
571 
572 	debug("%s: regs=%p, speed=%d\n", __func__, priv->regs,
573 	      (qspi_clk / (prescaler + 1)));
574 
575 	return 0;
576 }
577 
578 static int stm32_qspi_set_mode(struct udevice *bus, uint mode)
579 {
580 	struct stm32_qspi_priv *priv = dev_get_priv(bus);
581 
582 	_stm32_qspi_wait_for_not_busy(priv);
583 
584 	if ((mode & SPI_CPHA) && (mode & SPI_CPOL))
585 		setbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
586 	else if (!(mode & SPI_CPHA) && !(mode & SPI_CPOL))
587 		clrbits_le32(&priv->regs->dcr, STM32_QSPI_DCR_CKMODE);
588 	else
589 		return -ENODEV;
590 
591 	if (mode & SPI_CS_HIGH)
592 		return -ENODEV;
593 
594 	if (mode & SPI_RX_QUAD)
595 		priv->mode |= SPI_RX_QUAD;
596 	else if (mode & SPI_RX_DUAL)
597 		priv->mode |= SPI_RX_DUAL;
598 	else
599 		priv->mode &= ~(SPI_RX_QUAD | SPI_RX_DUAL);
600 
601 	if (mode & SPI_TX_QUAD)
602 		priv->mode |= SPI_TX_QUAD;
603 	else if (mode & SPI_TX_DUAL)
604 		priv->mode |= SPI_TX_DUAL;
605 	else
606 		priv->mode &= ~(SPI_TX_QUAD | SPI_TX_DUAL);
607 
608 	debug("%s: regs=%p, mode=%d rx: ", __func__, priv->regs, mode);
609 
610 	if (mode & SPI_RX_QUAD)
611 		debug("quad, tx: ");
612 	else if (mode & SPI_RX_DUAL)
613 		debug("dual, tx: ");
614 	else
615 		debug("single, tx: ");
616 
617 	if (mode & SPI_TX_QUAD)
618 		debug("quad\n");
619 	else if (mode & SPI_TX_DUAL)
620 		debug("dual\n");
621 	else
622 		debug("single\n");
623 
624 	return 0;
625 }
626 
627 static const struct dm_spi_ops stm32_qspi_ops = {
628 	.claim_bus	= stm32_qspi_claim_bus,
629 	.release_bus	= stm32_qspi_release_bus,
630 	.xfer		= stm32_qspi_xfer,
631 	.set_speed	= stm32_qspi_set_speed,
632 	.set_mode	= stm32_qspi_set_mode,
633 };
634 
635 static const struct udevice_id stm32_qspi_ids[] = {
636 	{ .compatible = "st,stm32-qspi" },
637 	{ }
638 };
639 
640 U_BOOT_DRIVER(stm32_qspi) = {
641 	.name	= "stm32_qspi",
642 	.id	= UCLASS_SPI,
643 	.of_match = stm32_qspi_ids,
644 	.ops	= &stm32_qspi_ops,
645 	.ofdata_to_platdata = stm32_qspi_ofdata_to_platdata,
646 	.platdata_auto_alloc_size = sizeof(struct stm32_qspi_platdata),
647 	.priv_auto_alloc_size = sizeof(struct stm32_qspi_priv),
648 	.probe	= stm32_qspi_probe,
649 	.remove = stm32_qspi_remove,
650 };
651