xref: /openbmc/u-boot/drivers/spi/omap3_spi.c (revision 8a00061e)
1 /*
2  * Copyright (C) 2010 Dirk Behme <dirk.behme@googlemail.com>
3  *
4  * Driver for McSPI controller on OMAP3. Based on davinci_spi.c
5  * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
6  *
7  * Copyright (C) 2007 Atmel Corporation
8  *
9  * Parts taken from linux/drivers/spi/omap2_mcspi.c
10  * Copyright (C) 2005, 2006 Nokia Corporation
11  *
12  * Modified by Ruslan Araslanov <ruslan.araslanov@vitecmm.com>
13  *
14  * See file CREDITS for list of people who contributed to this
15  * project.
16  *
17  * This program is free software; you can redistribute it and/or
18  * modify it under the terms of the GNU General Public License as
19  * published by the Free Software Foundation; either version 2 of
20  * the License, or (at your option) any later version.
21  *
22  * This program is distributed in the hope that it will be useful,
23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
25  * GNU General Public License for more details.
26  *
27  * You should have received a copy of the GNU General Public License
28  * along with this program; if not, write to the Free Software
29  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
30  * MA 02111-1307 USA
31  *
32  */
33 
34 #include <common.h>
35 #include <spi.h>
36 #include <malloc.h>
37 #include <asm/io.h>
38 #include "omap3_spi.h"
39 
40 #define WORD_LEN	8
41 #define SPI_WAIT_TIMEOUT 3000000;
42 
43 static void spi_reset(struct omap3_spi_slave *ds)
44 {
45 	unsigned int tmp;
46 
47 	writel(OMAP3_MCSPI_SYSCONFIG_SOFTRESET, &ds->regs->sysconfig);
48 	do {
49 		tmp = readl(&ds->regs->sysstatus);
50 	} while (!(tmp & OMAP3_MCSPI_SYSSTATUS_RESETDONE));
51 
52 	writel(OMAP3_MCSPI_SYSCONFIG_AUTOIDLE |
53 				 OMAP3_MCSPI_SYSCONFIG_ENAWAKEUP |
54 				 OMAP3_MCSPI_SYSCONFIG_SMARTIDLE,
55 				 &ds->regs->sysconfig);
56 
57 	writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable);
58 }
59 
60 static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val)
61 {
62 	writel(val, &ds->regs->channel[ds->slave.cs].chconf);
63 	/* Flash post writes to make immediate effect */
64 	readl(&ds->regs->channel[ds->slave.cs].chconf);
65 }
66 
67 static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable)
68 {
69 	writel(enable, &ds->regs->channel[ds->slave.cs].chctrl);
70         /* Flash post writes to make immediate effect */
71 	readl(&ds->regs->channel[ds->slave.cs].chctrl);
72 }
73 
74 void spi_init()
75 {
76 	/* do nothing */
77 }
78 
79 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
80 				  unsigned int max_hz, unsigned int mode)
81 {
82 	struct omap3_spi_slave	*ds;
83 	struct mcspi *regs;
84 
85 	/*
86 	 * OMAP3 McSPI (MultiChannel SPI) has 4 busses (modules)
87 	 * with different number of chip selects (CS, channels):
88 	 * McSPI1 has 4 CS (bus 0, cs 0 - 3)
89 	 * McSPI2 has 2 CS (bus 1, cs 0 - 1)
90 	 * McSPI3 has 2 CS (bus 2, cs 0 - 1)
91 	 * McSPI4 has 1 CS (bus 3, cs 0)
92 	 */
93 
94 	switch (bus) {
95 	case 0:
96 		regs = (struct mcspi *)OMAP3_MCSPI1_BASE;
97 		break;
98 #ifdef OMAP3_MCSPI2_BASE
99 	case 1:
100 		regs = (struct mcspi *)OMAP3_MCSPI2_BASE;
101 		break;
102 #endif
103 #ifdef OMAP3_MCSPI3_BASE
104 	case 2:
105 		regs = (struct mcspi *)OMAP3_MCSPI3_BASE;
106 		break;
107 #endif
108 #ifdef OMAP3_MCSPI4_BASE
109 	case 3:
110 		regs = (struct mcspi *)OMAP3_MCSPI4_BASE;
111 		break;
112 #endif
113 	default:
114 		printf("SPI error: unsupported bus %i. \
115 			Supported busses 0 - 3\n", bus);
116 		return NULL;
117 	}
118 
119 	if (((bus == 0) && (cs > 3)) ||
120 			((bus == 1) && (cs > 1)) ||
121 			((bus == 2) && (cs > 1)) ||
122 			((bus == 3) && (cs > 0))) {
123 		printf("SPI error: unsupported chip select %i \
124 			on bus %i\n", cs, bus);
125 		return NULL;
126 	}
127 
128 	if (max_hz > OMAP3_MCSPI_MAX_FREQ) {
129 		printf("SPI error: unsupported frequency %i Hz. \
130 			Max frequency is 48 Mhz\n", max_hz);
131 		return NULL;
132 	}
133 
134 	if (mode > SPI_MODE_3) {
135 		printf("SPI error: unsupported SPI mode %i\n", mode);
136 		return NULL;
137 	}
138 
139 	ds = spi_alloc_slave(struct omap3_spi_slave, bus, cs);
140 	if (!ds) {
141 		printf("SPI error: malloc of SPI structure failed\n");
142 		return NULL;
143 	}
144 
145 	ds->regs = regs;
146 	ds->freq = max_hz;
147 	ds->mode = mode;
148 
149 	return &ds->slave;
150 }
151 
152 void spi_free_slave(struct spi_slave *slave)
153 {
154 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
155 
156 	free(ds);
157 }
158 
159 int spi_claim_bus(struct spi_slave *slave)
160 {
161 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
162 	unsigned int conf, div = 0;
163 
164 	/* McSPI global module configuration */
165 
166 	/*
167 	 * setup when switching from (reset default) slave mode
168 	 * to single-channel master mode
169 	 */
170 	spi_reset(ds);
171 	conf = readl(&ds->regs->modulctrl);
172 	conf &= ~(OMAP3_MCSPI_MODULCTRL_STEST | OMAP3_MCSPI_MODULCTRL_MS);
173 	conf |= OMAP3_MCSPI_MODULCTRL_SINGLE;
174 	writel(conf, &ds->regs->modulctrl);
175 
176 	/* McSPI individual channel configuration */
177 
178 	/* Calculate clock divisor. Valid range: 0x0 - 0xC ( /1 - /4096 ) */
179 	if (ds->freq) {
180 		while (div <= 0xC && (OMAP3_MCSPI_MAX_FREQ / (1 << div))
181 					 > ds->freq)
182 			div++;
183 	} else
184 		div = 0xC;
185 
186 	conf = readl(&ds->regs->channel[ds->slave.cs].chconf);
187 
188 	/* standard 4-wire master mode:	SCK, MOSI/out, MISO/in, nCS
189 	 * REVISIT: this controller could support SPI_3WIRE mode.
190 	 */
191 #ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
192 	/*
193 	 * Some boards have D0 wired as MOSI / D1 as MISO instead of
194 	 * The normal D0 as MISO / D1 as MOSI.
195 	 */
196 	conf &= ~OMAP3_MCSPI_CHCONF_DPE0;
197 	conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
198 #else
199 	conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
200 	conf |= OMAP3_MCSPI_CHCONF_DPE0;
201 #endif
202 
203 	/* wordlength */
204 	conf &= ~OMAP3_MCSPI_CHCONF_WL_MASK;
205 	conf |= (WORD_LEN - 1) << 7;
206 
207 	/* set chipselect polarity; manage with FORCE */
208 	if (!(ds->mode & SPI_CS_HIGH))
209 		conf |= OMAP3_MCSPI_CHCONF_EPOL; /* active-low; normal */
210 	else
211 		conf &= ~OMAP3_MCSPI_CHCONF_EPOL;
212 
213 	/* set clock divisor */
214 	conf &= ~OMAP3_MCSPI_CHCONF_CLKD_MASK;
215 	conf |= div << 2;
216 
217 	/* set SPI mode 0..3 */
218 	if (ds->mode & SPI_CPOL)
219 		conf |= OMAP3_MCSPI_CHCONF_POL;
220 	else
221 		conf &= ~OMAP3_MCSPI_CHCONF_POL;
222 	if (ds->mode & SPI_CPHA)
223 		conf |= OMAP3_MCSPI_CHCONF_PHA;
224 	else
225 		conf &= ~OMAP3_MCSPI_CHCONF_PHA;
226 
227 	/* Transmit & receive mode */
228 	conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
229 
230 	omap3_spi_write_chconf(ds,conf);
231 
232 	return 0;
233 }
234 
235 void spi_release_bus(struct spi_slave *slave)
236 {
237 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
238 
239 	/* Reset the SPI hardware */
240 	spi_reset(ds);
241 }
242 
243 int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp,
244 		    unsigned long flags)
245 {
246 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
247 	int i;
248 	int timeout = SPI_WAIT_TIMEOUT;
249 	int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
250 
251 	/* Enable the channel */
252 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
253 
254 	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
255 	chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY;
256 	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
257 	omap3_spi_write_chconf(ds,chconf);
258 
259 	for (i = 0; i < len; i++) {
260 		/* wait till TX register is empty (TXS == 1) */
261 		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
262 			 OMAP3_MCSPI_CHSTAT_TXS)) {
263 			if (--timeout <= 0) {
264 				printf("SPI TXS timed out, status=0x%08x\n",
265 				       readl(&ds->regs->channel[ds->slave.cs].chstat));
266 				return -1;
267 			}
268 		}
269 		/* Write the data */
270 		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
271 	}
272 
273         /* wait to finish of transfer */
274         while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
275                          OMAP3_MCSPI_CHSTAT_EOT));
276 
277 	/* Disable the channel otherwise the next immediate RX will get affected */
278 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
279 
280 	if (flags & SPI_XFER_END) {
281 
282 		chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
283 		omap3_spi_write_chconf(ds,chconf);
284 	}
285 	return 0;
286 }
287 
288 int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp,
289 		   unsigned long flags)
290 {
291 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
292 	int i;
293 	int timeout = SPI_WAIT_TIMEOUT;
294 	int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
295 
296 	/* Enable the channel */
297 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
298 
299 	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
300 	chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY;
301 	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
302 	omap3_spi_write_chconf(ds,chconf);
303 
304 	writel(0, &ds->regs->channel[ds->slave.cs].tx);
305 
306 	for (i = 0; i < len; i++) {
307 		/* Wait till RX register contains data (RXS == 1) */
308 		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
309 			 OMAP3_MCSPI_CHSTAT_RXS)) {
310 			if (--timeout <= 0) {
311 				printf("SPI RXS timed out, status=0x%08x\n",
312 				       readl(&ds->regs->channel[ds->slave.cs].chstat));
313 				return -1;
314 			}
315 		}
316 
317 		/* Disable the channel to prevent furher receiving */
318 		if(i == (len - 1))
319 			omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
320 
321 		/* Read the data */
322 		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
323 	}
324 
325 	if (flags & SPI_XFER_END) {
326 		chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
327 		omap3_spi_write_chconf(ds,chconf);
328 	}
329 
330 	return 0;
331 }
332 
333 /*McSPI Transmit Receive Mode*/
334 int omap3_spi_txrx(struct spi_slave *slave,
335 		unsigned int len, const u8 *txp, u8 *rxp, unsigned long flags)
336 {
337 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
338 	int timeout = SPI_WAIT_TIMEOUT;
339 	int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
340 	int irqstatus = readl(&ds->regs->irqstatus);
341 	int i=0;
342 
343 	/*Enable SPI channel*/
344 	omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
345 
346 	/*set TRANSMIT-RECEIVE Mode*/
347 	chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK;
348 	chconf |= OMAP3_MCSPI_CHCONF_FORCE;
349 	omap3_spi_write_chconf(ds,chconf);
350 
351 	/*Shift in and out 1 byte at time*/
352 	for (i=0; i < len; i++){
353 		/* Write: wait for TX empty (TXS == 1)*/
354 		irqstatus |= (1<< (4*(ds->slave.bus)));
355 		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
356 			 OMAP3_MCSPI_CHSTAT_TXS)) {
357 			if (--timeout <= 0) {
358 				printf("SPI TXS timed out, status=0x%08x\n",
359 				       readl(&ds->regs->channel[ds->slave.cs].chstat));
360 				return -1;
361 			}
362 		}
363 		/* Write the data */
364 		writel(txp[i], &ds->regs->channel[ds->slave.cs].tx);
365 
366 		/*Read: wait for RX containing data (RXS == 1)*/
367 		while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) &
368 			 OMAP3_MCSPI_CHSTAT_RXS)) {
369 			if (--timeout <= 0) {
370 				printf("SPI RXS timed out, status=0x%08x\n",
371 				       readl(&ds->regs->channel[ds->slave.cs].chstat));
372 				return -1;
373 			}
374 		}
375 		/* Read the data */
376 		rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx);
377 	}
378 	/* Disable the channel */
379         omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
380 
381 	/*if transfer must be terminated disable the channel*/
382 	if (flags & SPI_XFER_END) {
383 		chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
384 		omap3_spi_write_chconf(ds,chconf);
385 	}
386 
387 	return 0;
388 }
389 
390 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
391 	     const void *dout, void *din, unsigned long flags)
392 {
393 	struct omap3_spi_slave *ds = to_omap3_spi(slave);
394 	unsigned int	len;
395 	const u8	*txp = dout;
396 	u8		*rxp = din;
397 	int ret = -1;
398 
399 	if (bitlen % 8)
400 		return -1;
401 
402 	len = bitlen / 8;
403 
404 	if (bitlen == 0) {	 /* only change CS */
405 		int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf);
406 
407 		if (flags & SPI_XFER_BEGIN) {
408 			omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN);
409 			chconf |= OMAP3_MCSPI_CHCONF_FORCE;
410 			omap3_spi_write_chconf(ds,chconf);
411 		}
412 		if (flags & SPI_XFER_END) {
413 			chconf &= ~OMAP3_MCSPI_CHCONF_FORCE;
414 			omap3_spi_write_chconf(ds,chconf);
415 			omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS);
416 		}
417 		ret = 0;
418 	} else {
419 		if (dout != NULL && din != NULL)
420 			ret = omap3_spi_txrx(slave, len, txp, rxp, flags);
421 		else if (dout != NULL)
422 			ret = omap3_spi_write(slave, len, txp, flags);
423 		else if (din != NULL)
424 			ret = omap3_spi_read(slave, len, rxp, flags);
425 	}
426 	return ret;
427 }
428 
429 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
430 {
431 	return 1;
432 }
433 
434 void spi_cs_activate(struct spi_slave *slave)
435 {
436 }
437 
438 void spi_cs_deactivate(struct spi_slave *slave)
439 {
440 }
441