1 /* 2 * Freescale i.MX28 SPI driver 3 * 4 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> 5 * on behalf of DENX Software Engineering GmbH 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 * 22 * NOTE: This driver only supports the SPI-controller chipselects, 23 * GPIO driven chipselects are not supported. 24 */ 25 26 #include <common.h> 27 #include <malloc.h> 28 #include <spi.h> 29 #include <asm/errno.h> 30 #include <asm/io.h> 31 #include <asm/arch/clock.h> 32 #include <asm/arch/imx-regs.h> 33 #include <asm/arch/sys_proto.h> 34 35 #define MXS_SPI_MAX_TIMEOUT 1000000 36 #define MXS_SPI_PORT_OFFSET 0x2000 37 38 struct mxs_spi_slave { 39 struct spi_slave slave; 40 uint32_t max_khz; 41 uint32_t mode; 42 struct mx28_ssp_regs *regs; 43 }; 44 45 static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave) 46 { 47 return container_of(slave, struct mxs_spi_slave, slave); 48 } 49 50 void spi_init(void) 51 { 52 } 53 54 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, 55 unsigned int max_hz, unsigned int mode) 56 { 57 struct mxs_spi_slave *mxs_slave; 58 uint32_t addr; 59 60 if (bus > 3) { 61 printf("MXS SPI: Max bus number is 3\n"); 62 return NULL; 63 } 64 65 mxs_slave = malloc(sizeof(struct mxs_spi_slave)); 66 if (!mxs_slave) 67 return NULL; 68 69 addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET); 70 71 mxs_slave->slave.bus = bus; 72 mxs_slave->slave.cs = cs; 73 mxs_slave->max_khz = max_hz / 1000; 74 mxs_slave->mode = mode; 75 mxs_slave->regs = (struct mx28_ssp_regs *)addr; 76 77 return &mxs_slave->slave; 78 } 79 80 void spi_free_slave(struct spi_slave *slave) 81 { 82 struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); 83 free(mxs_slave); 84 } 85 86 int spi_claim_bus(struct spi_slave *slave) 87 { 88 struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); 89 struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; 90 uint32_t reg = 0; 91 92 mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg); 93 94 writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0); 95 96 reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS; 97 reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0; 98 reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0; 99 writel(reg, &ssp_regs->hw_ssp_ctrl1); 100 101 writel(0, &ssp_regs->hw_ssp_cmd0); 102 103 mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz); 104 105 return 0; 106 } 107 108 void spi_release_bus(struct spi_slave *slave) 109 { 110 } 111 112 static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs) 113 { 114 writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set); 115 writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr); 116 } 117 118 static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs) 119 { 120 writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr); 121 writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set); 122 } 123 124 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 125 const void *dout, void *din, unsigned long flags) 126 { 127 struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave); 128 struct mx28_ssp_regs *ssp_regs = mxs_slave->regs; 129 int len = bitlen / 8; 130 const char *tx = dout; 131 char *rx = din; 132 133 if (bitlen == 0) 134 return 0; 135 136 if (!rx && !tx) 137 return 0; 138 139 if (flags & SPI_XFER_BEGIN) 140 mxs_spi_start_xfer(ssp_regs); 141 142 while (len--) { 143 /* We transfer 1 byte */ 144 writel(1, &ssp_regs->hw_ssp_xfer_size); 145 146 if ((flags & SPI_XFER_END) && !len) 147 mxs_spi_end_xfer(ssp_regs); 148 149 if (tx) 150 writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr); 151 else 152 writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set); 153 154 writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set); 155 156 if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg, 157 SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { 158 printf("MXS SPI: Timeout waiting for start\n"); 159 return -1; 160 } 161 162 if (tx) 163 writel(*tx++, &ssp_regs->hw_ssp_data); 164 165 writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set); 166 167 if (rx) { 168 if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg, 169 SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) { 170 printf("MXS SPI: Timeout waiting for data\n"); 171 return -1; 172 } 173 174 *rx = readl(&ssp_regs->hw_ssp_data); 175 rx++; 176 } 177 178 if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg, 179 SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) { 180 printf("MXS SPI: Timeout waiting for finish\n"); 181 return -1; 182 } 183 } 184 185 return 0; 186 } 187