1 /* 2 * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de> 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation; either version 2 of 7 * the License, or (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 17 * MA 02111-1307 USA 18 * 19 */ 20 21 #include <common.h> 22 #include <malloc.h> 23 #include <spi.h> 24 #include <asm/errno.h> 25 #include <asm/io.h> 26 #include <asm/gpio.h> 27 #include <asm/arch/imx-regs.h> 28 #include <asm/arch/clock.h> 29 30 #ifdef CONFIG_MX27 31 /* i.MX27 has a completely wrong register layout and register definitions in the 32 * datasheet, the correct one is in the Freescale's Linux driver */ 33 34 #error "i.MX27 CSPI not supported due to drastic differences in register definitions" \ 35 "See linux mxc_spi driver from Freescale for details." 36 #endif 37 38 static unsigned long spi_bases[] = { 39 MXC_SPI_BASE_ADDRESSES 40 }; 41 42 #define OUT MXC_GPIO_DIRECTION_OUT 43 44 #define reg_read readl 45 #define reg_write(a, v) writel(v, a) 46 47 struct mxc_spi_slave { 48 struct spi_slave slave; 49 unsigned long base; 50 u32 ctrl_reg; 51 #if defined(MXC_ECSPI) 52 u32 cfg_reg; 53 #endif 54 int gpio; 55 int ss_pol; 56 }; 57 58 static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) 59 { 60 return container_of(slave, struct mxc_spi_slave, slave); 61 } 62 63 void spi_cs_activate(struct spi_slave *slave) 64 { 65 struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); 66 if (mxcs->gpio > 0) 67 gpio_set_value(mxcs->gpio, mxcs->ss_pol); 68 } 69 70 void spi_cs_deactivate(struct spi_slave *slave) 71 { 72 struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); 73 if (mxcs->gpio > 0) 74 gpio_set_value(mxcs->gpio, 75 !(mxcs->ss_pol)); 76 } 77 78 u32 get_cspi_div(u32 div) 79 { 80 int i; 81 82 for (i = 0; i < 8; i++) { 83 if (div <= (4 << i)) 84 return i; 85 } 86 return i; 87 } 88 89 #ifdef MXC_CSPI 90 static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, 91 unsigned int max_hz, unsigned int mode) 92 { 93 unsigned int ctrl_reg; 94 u32 clk_src; 95 u32 div; 96 97 clk_src = mxc_get_clock(MXC_CSPI_CLK); 98 99 div = DIV_ROUND_UP(clk_src, max_hz); 100 div = get_cspi_div(div); 101 102 debug("clk %d Hz, div %d, real clk %d Hz\n", 103 max_hz, div, clk_src / (4 << div)); 104 105 ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) | 106 MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS) | 107 MXC_CSPICTRL_DATARATE(div) | 108 MXC_CSPICTRL_EN | 109 #ifdef CONFIG_MX35 110 MXC_CSPICTRL_SSCTL | 111 #endif 112 MXC_CSPICTRL_MODE; 113 114 if (mode & SPI_CPHA) 115 ctrl_reg |= MXC_CSPICTRL_PHA; 116 if (mode & SPI_CPOL) 117 ctrl_reg |= MXC_CSPICTRL_POL; 118 if (mode & SPI_CS_HIGH) 119 ctrl_reg |= MXC_CSPICTRL_SSPOL; 120 mxcs->ctrl_reg = ctrl_reg; 121 122 return 0; 123 } 124 #endif 125 126 #ifdef MXC_ECSPI 127 static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, 128 unsigned int max_hz, unsigned int mode) 129 { 130 u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); 131 s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config; 132 u32 ss_pol = 0, sclkpol = 0, sclkpha = 0; 133 struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; 134 135 if (max_hz == 0) { 136 printf("Error: desired clock is 0\n"); 137 return -1; 138 } 139 140 reg_ctrl = reg_read(®s->ctrl); 141 142 /* Reset spi */ 143 reg_write(®s->ctrl, (reg_ctrl & ~MXC_CSPICTRL_EN)); 144 reg_write(®s->ctrl, (reg_ctrl | MXC_CSPICTRL_EN)); 145 146 /* 147 * The following computation is taken directly from Freescale's code. 148 */ 149 if (clk_src > max_hz) { 150 pre_div = DIV_ROUND_UP(clk_src, max_hz); 151 if (pre_div > 16) { 152 post_div = pre_div / 16; 153 pre_div = 15; 154 } 155 if (post_div != 0) { 156 for (i = 0; i < 16; i++) { 157 if ((1 << i) >= post_div) 158 break; 159 } 160 if (i == 16) { 161 printf("Error: no divider for the freq: %d\n", 162 max_hz); 163 return -1; 164 } 165 post_div = i; 166 } 167 } 168 169 debug("pre_div = %d, post_div=%d\n", pre_div, post_div); 170 reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_SELCHAN(3)) | 171 MXC_CSPICTRL_SELCHAN(cs); 172 reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_PREDIV(0x0F)) | 173 MXC_CSPICTRL_PREDIV(pre_div); 174 reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) | 175 MXC_CSPICTRL_POSTDIV(post_div); 176 177 /* always set to master mode */ 178 reg_ctrl |= 1 << (cs + 4); 179 180 /* We need to disable SPI before changing registers */ 181 reg_ctrl &= ~MXC_CSPICTRL_EN; 182 183 if (mode & SPI_CS_HIGH) 184 ss_pol = 1; 185 186 if (mode & SPI_CPOL) 187 sclkpol = 1; 188 189 if (mode & SPI_CPHA) 190 sclkpha = 1; 191 192 reg_config = reg_read(®s->cfg); 193 194 /* 195 * Configuration register setup 196 * The MX51 supports different setup for each SS 197 */ 198 reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_SSPOL))) | 199 (ss_pol << (cs + MXC_CSPICON_SSPOL)); 200 reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_POL))) | 201 (sclkpol << (cs + MXC_CSPICON_POL)); 202 reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_PHA))) | 203 (sclkpha << (cs + MXC_CSPICON_PHA)); 204 205 debug("reg_ctrl = 0x%x\n", reg_ctrl); 206 reg_write(®s->ctrl, reg_ctrl); 207 debug("reg_config = 0x%x\n", reg_config); 208 reg_write(®s->cfg, reg_config); 209 210 /* save config register and control register */ 211 mxcs->ctrl_reg = reg_ctrl; 212 mxcs->cfg_reg = reg_config; 213 214 /* clear interrupt reg */ 215 reg_write(®s->intr, 0); 216 reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); 217 218 return 0; 219 } 220 #endif 221 222 int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen, 223 const u8 *dout, u8 *din, unsigned long flags) 224 { 225 struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); 226 int nbytes = (bitlen + 7) / 8; 227 u32 data, cnt, i; 228 struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; 229 230 debug("%s: bitlen %d dout 0x%x din 0x%x\n", 231 __func__, bitlen, (u32)dout, (u32)din); 232 233 mxcs->ctrl_reg = (mxcs->ctrl_reg & 234 ~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) | 235 MXC_CSPICTRL_BITCOUNT(bitlen - 1); 236 237 reg_write(®s->ctrl, mxcs->ctrl_reg | MXC_CSPICTRL_EN); 238 #ifdef MXC_ECSPI 239 reg_write(®s->cfg, mxcs->cfg_reg); 240 #endif 241 242 /* Clear interrupt register */ 243 reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); 244 245 /* 246 * The SPI controller works only with words, 247 * check if less than a word is sent. 248 * Access to the FIFO is only 32 bit 249 */ 250 if (bitlen % 32) { 251 data = 0; 252 cnt = (bitlen % 32) / 8; 253 if (dout) { 254 for (i = 0; i < cnt; i++) { 255 data = (data << 8) | (*dout++ & 0xFF); 256 } 257 } 258 debug("Sending SPI 0x%x\n", data); 259 260 reg_write(®s->txdata, data); 261 nbytes -= cnt; 262 } 263 264 data = 0; 265 266 while (nbytes > 0) { 267 data = 0; 268 if (dout) { 269 /* Buffer is not 32-bit aligned */ 270 if ((unsigned long)dout & 0x03) { 271 data = 0; 272 for (i = 0; i < 4; i++) 273 data = (data << 8) | (*dout++ & 0xFF); 274 } else { 275 data = *(u32 *)dout; 276 data = cpu_to_be32(data); 277 } 278 dout += 4; 279 } 280 debug("Sending SPI 0x%x\n", data); 281 reg_write(®s->txdata, data); 282 nbytes -= 4; 283 } 284 285 /* FIFO is written, now starts the transfer setting the XCH bit */ 286 reg_write(®s->ctrl, mxcs->ctrl_reg | 287 MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH); 288 289 /* Wait until the TC (Transfer completed) bit is set */ 290 while ((reg_read(®s->stat) & MXC_CSPICTRL_TC) == 0) 291 ; 292 293 /* Transfer completed, clear any pending request */ 294 reg_write(®s->stat, MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF); 295 296 nbytes = (bitlen + 7) / 8; 297 298 cnt = nbytes % 32; 299 300 if (bitlen % 32) { 301 data = reg_read(®s->rxdata); 302 cnt = (bitlen % 32) / 8; 303 data = cpu_to_be32(data) >> ((sizeof(data) - cnt) * 8); 304 debug("SPI Rx unaligned: 0x%x\n", data); 305 if (din) { 306 memcpy(din, &data, cnt); 307 din += cnt; 308 } 309 nbytes -= cnt; 310 } 311 312 while (nbytes > 0) { 313 u32 tmp; 314 tmp = reg_read(®s->rxdata); 315 data = cpu_to_be32(tmp); 316 debug("SPI Rx: 0x%x 0x%x\n", tmp, data); 317 cnt = min(nbytes, sizeof(data)); 318 if (din) { 319 memcpy(din, &data, cnt); 320 din += cnt; 321 } 322 nbytes -= cnt; 323 } 324 325 return 0; 326 327 } 328 329 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, 330 void *din, unsigned long flags) 331 { 332 int n_bytes = (bitlen + 7) / 8; 333 int n_bits; 334 int ret; 335 u32 blk_size; 336 u8 *p_outbuf = (u8 *)dout; 337 u8 *p_inbuf = (u8 *)din; 338 339 if (!slave) 340 return -1; 341 342 if (flags & SPI_XFER_BEGIN) 343 spi_cs_activate(slave); 344 345 while (n_bytes > 0) { 346 if (n_bytes < MAX_SPI_BYTES) 347 blk_size = n_bytes; 348 else 349 blk_size = MAX_SPI_BYTES; 350 351 n_bits = blk_size * 8; 352 353 ret = spi_xchg_single(slave, n_bits, p_outbuf, p_inbuf, 0); 354 355 if (ret) 356 return ret; 357 if (dout) 358 p_outbuf += blk_size; 359 if (din) 360 p_inbuf += blk_size; 361 n_bytes -= blk_size; 362 } 363 364 if (flags & SPI_XFER_END) { 365 spi_cs_deactivate(slave); 366 } 367 368 return 0; 369 } 370 371 void spi_init(void) 372 { 373 } 374 375 static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) 376 { 377 int ret; 378 379 /* 380 * Some SPI devices require active chip-select over multiple 381 * transactions, we achieve this using a GPIO. Still, the SPI 382 * controller has to be configured to use one of its own chipselects. 383 * To use this feature you have to call spi_setup_slave() with 384 * cs = internal_cs | (gpio << 8), and you have to use some unused 385 * on this SPI controller cs between 0 and 3. 386 */ 387 if (cs > 3) { 388 mxcs->gpio = cs >> 8; 389 cs &= 3; 390 ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol)); 391 if (ret) { 392 printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); 393 return -EINVAL; 394 } 395 } else { 396 mxcs->gpio = -1; 397 } 398 399 return cs; 400 } 401 402 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, 403 unsigned int max_hz, unsigned int mode) 404 { 405 struct mxc_spi_slave *mxcs; 406 int ret; 407 408 if (bus >= ARRAY_SIZE(spi_bases)) 409 return NULL; 410 411 mxcs = calloc(sizeof(struct mxc_spi_slave), 1); 412 if (!mxcs) { 413 puts("mxc_spi: SPI Slave not allocated !\n"); 414 return NULL; 415 } 416 417 mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; 418 419 ret = decode_cs(mxcs, cs); 420 if (ret < 0) { 421 free(mxcs); 422 return NULL; 423 } 424 425 cs = ret; 426 427 mxcs->slave.bus = bus; 428 mxcs->slave.cs = cs; 429 mxcs->base = spi_bases[bus]; 430 431 ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); 432 if (ret) { 433 printf("mxc_spi: cannot setup SPI controller\n"); 434 free(mxcs); 435 return NULL; 436 } 437 return &mxcs->slave; 438 } 439 440 void spi_free_slave(struct spi_slave *slave) 441 { 442 struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); 443 444 free(mxcs); 445 } 446 447 int spi_claim_bus(struct spi_slave *slave) 448 { 449 struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); 450 struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; 451 452 reg_write(®s->rxdata, 1); 453 udelay(1); 454 reg_write(®s->ctrl, mxcs->ctrl_reg); 455 reg_write(®s->period, MXC_CSPIPERIOD_32KHZ); 456 reg_write(®s->intr, 0); 457 458 return 0; 459 } 460 461 void spi_release_bus(struct spi_slave *slave) 462 { 463 /* TODO: Shut the controller down */ 464 } 465