1 /* 2 * Copyright (c) 2006 Ben Warren, Qstreams Networks Inc. 3 * With help from the common/soft_spi and cpu/mpc8260 drivers 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 26 #include <malloc.h> 27 #include <spi.h> 28 #include <asm/mpc8xxx_spi.h> 29 30 #define SPI_EV_NE (0x80000000 >> 22) /* Receiver Not Empty */ 31 #define SPI_EV_NF (0x80000000 >> 23) /* Transmitter Not Full */ 32 33 #define SPI_MODE_LOOP (0x80000000 >> 1) /* Loopback mode */ 34 #define SPI_MODE_REV (0x80000000 >> 5) /* Reverse mode - MSB first */ 35 #define SPI_MODE_MS (0x80000000 >> 6) /* Always master */ 36 #define SPI_MODE_EN (0x80000000 >> 7) /* Enable interface */ 37 38 #define SPI_TIMEOUT 1000 39 40 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, 41 unsigned int max_hz, unsigned int mode) 42 { 43 struct spi_slave *slave; 44 45 if (!spi_cs_is_valid(bus, cs)) 46 return NULL; 47 48 slave = malloc(sizeof(struct spi_slave)); 49 if (!slave) 50 return NULL; 51 52 slave->bus = bus; 53 slave->cs = cs; 54 55 /* 56 * TODO: Some of the code in spi_init() should probably move 57 * here, or into spi_claim_bus() below. 58 */ 59 60 return slave; 61 } 62 63 void spi_free_slave(struct spi_slave *slave) 64 { 65 free(slave); 66 } 67 68 void spi_init(void) 69 { 70 volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi; 71 72 /* 73 * SPI pins on the MPC83xx are not muxed, so all we do is initialize 74 * some registers 75 */ 76 spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN; 77 spi->mode = (spi->mode & 0xfff0ffff) | (1 << 16); /* Use SYSCLK / 8 78 (16.67MHz typ.) */ 79 spi->event = 0xffffffff; /* Clear all SPI events */ 80 spi->mask = 0x00000000; /* Mask all SPI interrupts */ 81 spi->com = 0; /* LST bit doesn't do anything, so disregard */ 82 } 83 84 int spi_claim_bus(struct spi_slave *slave) 85 { 86 return 0; 87 } 88 89 void spi_release_bus(struct spi_slave *slave) 90 { 91 92 } 93 94 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, 95 void *din, unsigned long flags) 96 { 97 volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi; 98 unsigned int tmpdout, tmpdin, event; 99 int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0); 100 int tm, isRead = 0; 101 unsigned char charSize = 32; 102 103 debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n", 104 slave->bus, slave->cs, *(uint *) dout, *(uint *) din, bitlen); 105 106 if (flags & SPI_XFER_BEGIN) 107 spi_cs_activate(slave); 108 109 spi->event = 0xffffffff; /* Clear all SPI events */ 110 111 /* handle data in 32-bit chunks */ 112 while (numBlks--) { 113 tmpdout = 0; 114 charSize = (bitlen >= 32 ? 32 : bitlen); 115 116 /* Shift data so it's msb-justified */ 117 tmpdout = *(u32 *) dout >> (32 - charSize); 118 119 /* The LEN field of the SPMODE register is set as follows: 120 * 121 * Bit length setting 122 * len <= 4 3 123 * 4 < len <= 16 len - 1 124 * len > 16 0 125 */ 126 127 if (bitlen <= 16) { 128 if (bitlen <= 4) 129 spi->mode = (spi->mode & 0xff0fffff) | 130 (3 << 20); 131 else 132 spi->mode = (spi->mode & 0xff0fffff) | 133 ((bitlen - 1) << 20); 134 } else { 135 spi->mode = (spi->mode & 0xff0fffff); 136 /* Set up the next iteration if sending > 32 bits */ 137 bitlen -= 32; 138 dout += 4; 139 } 140 141 spi->tx = tmpdout; /* Write the data out */ 142 debug("*** spi_xfer: ... %08x written\n", tmpdout); 143 144 /* 145 * Wait for SPI transmit to get out 146 * or time out (1 second = 1000 ms) 147 * The NE event must be read and cleared first 148 */ 149 for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) { 150 event = spi->event; 151 if (event & SPI_EV_NE) { 152 tmpdin = spi->rx; 153 spi->event |= SPI_EV_NE; 154 isRead = 1; 155 156 *(u32 *) din = (tmpdin << (32 - charSize)); 157 if (charSize == 32) { 158 /* Advance output buffer by 32 bits */ 159 din += 4; 160 } 161 } 162 /* 163 * Only bail when we've had both NE and NF events. 164 * This will cause timeouts on RO devices, so maybe 165 * in the future put an arbitrary delay after writing 166 * the device. Arbitrary delays suck, though... 167 */ 168 if (isRead && (event & SPI_EV_NF)) 169 break; 170 } 171 if (tm >= SPI_TIMEOUT) 172 puts("*** spi_xfer: Time out during SPI transfer"); 173 174 debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin); 175 } 176 177 if (flags & SPI_XFER_END) 178 spi_cs_deactivate(slave); 179 180 return 0; 181 } 182