1 /* 2 * Copyright (c) 2011-12 The Chromium OS Authors. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 * 6 * This file is derived from the flashrom project. 7 */ 8 9 #include <common.h> 10 #include <dm.h> 11 #include <errno.h> 12 #include <malloc.h> 13 #include <spi.h> 14 #include <pci.h> 15 #include <pci_ids.h> 16 #include <asm/io.h> 17 18 #include "ich.h" 19 20 #define SPI_OPCODE_WREN 0x06 21 #define SPI_OPCODE_FAST_READ 0x0b 22 23 struct ich_spi_platdata { 24 pci_dev_t dev; /* PCI device number */ 25 int ich_version; /* Controller version, 7 or 9 */ 26 bool use_sbase; /* Use SBASE instead of RCB */ 27 }; 28 29 struct ich_spi_priv { 30 int ichspi_lock; 31 int locked; 32 int opmenu; 33 int menubytes; 34 void *base; /* Base of register set */ 35 int preop; 36 int optype; 37 int addr; 38 int data; 39 unsigned databytes; 40 int status; 41 int control; 42 int bbar; 43 int bcr; 44 uint32_t *pr; /* only for ich9 */ 45 int speed; /* pointer to speed control */ 46 ulong max_speed; /* Maximum bus speed in MHz */ 47 ulong cur_speed; /* Current bus speed */ 48 struct spi_trans trans; /* current transaction in progress */ 49 }; 50 51 static u8 ich_readb(struct ich_spi_priv *priv, int reg) 52 { 53 u8 value = readb(priv->base + reg); 54 55 debug("read %2.2x from %4.4x\n", value, reg); 56 57 return value; 58 } 59 60 static u16 ich_readw(struct ich_spi_priv *priv, int reg) 61 { 62 u16 value = readw(priv->base + reg); 63 64 debug("read %4.4x from %4.4x\n", value, reg); 65 66 return value; 67 } 68 69 static u32 ich_readl(struct ich_spi_priv *priv, int reg) 70 { 71 u32 value = readl(priv->base + reg); 72 73 debug("read %8.8x from %4.4x\n", value, reg); 74 75 return value; 76 } 77 78 static void ich_writeb(struct ich_spi_priv *priv, u8 value, int reg) 79 { 80 writeb(value, priv->base + reg); 81 debug("wrote %2.2x to %4.4x\n", value, reg); 82 } 83 84 static void ich_writew(struct ich_spi_priv *priv, u16 value, int reg) 85 { 86 writew(value, priv->base + reg); 87 debug("wrote %4.4x to %4.4x\n", value, reg); 88 } 89 90 static void ich_writel(struct ich_spi_priv *priv, u32 value, int reg) 91 { 92 writel(value, priv->base + reg); 93 debug("wrote %8.8x to %4.4x\n", value, reg); 94 } 95 96 static void write_reg(struct ich_spi_priv *priv, const void *value, 97 int dest_reg, uint32_t size) 98 { 99 memcpy_toio(priv->base + dest_reg, value, size); 100 } 101 102 static void read_reg(struct ich_spi_priv *priv, int src_reg, void *value, 103 uint32_t size) 104 { 105 memcpy_fromio(value, priv->base + src_reg, size); 106 } 107 108 static void ich_set_bbar(struct ich_spi_priv *ctlr, uint32_t minaddr) 109 { 110 const uint32_t bbar_mask = 0x00ffff00; 111 uint32_t ichspi_bbar; 112 113 minaddr &= bbar_mask; 114 ichspi_bbar = ich_readl(ctlr, ctlr->bbar) & ~bbar_mask; 115 ichspi_bbar |= minaddr; 116 ich_writel(ctlr, ichspi_bbar, ctlr->bbar); 117 } 118 119 /* 120 * Check if this device ID matches one of supported Intel PCH devices. 121 * 122 * Return the ICH version if there is a match, or zero otherwise. 123 */ 124 static int get_ich_version(uint16_t device_id) 125 { 126 if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC || 127 device_id == PCI_DEVICE_ID_INTEL_ITC_LPC || 128 device_id == PCI_DEVICE_ID_INTEL_QRK_ILB) 129 return 7; 130 131 if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && 132 device_id <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) || 133 (device_id >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && 134 device_id <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX) || 135 device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC || 136 device_id == PCI_DEVICE_ID_INTEL_LYNXPOINT_LPC || 137 device_id == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LPC) 138 return 9; 139 140 return 0; 141 } 142 143 /* @return 1 if the SPI flash supports the 33MHz speed */ 144 static int ich9_can_do_33mhz(pci_dev_t dev) 145 { 146 u32 fdod, speed; 147 148 /* Observe SPI Descriptor Component Section 0 */ 149 pci_write_config_dword(dev, 0xb0, 0x1000); 150 151 /* Extract the Write/Erase SPI Frequency from descriptor */ 152 pci_read_config_dword(dev, 0xb4, &fdod); 153 154 /* Bits 23:21 have the fast read clock frequency, 0=20MHz, 1=33MHz */ 155 speed = (fdod >> 21) & 7; 156 157 return speed == 1; 158 } 159 160 static int ich_find_spi_controller(struct ich_spi_platdata *ich) 161 { 162 int last_bus = pci_last_busno(); 163 int bus; 164 165 if (last_bus == -1) { 166 debug("No PCI busses?\n"); 167 return -ENODEV; 168 } 169 170 for (bus = 0; bus <= last_bus; bus++) { 171 uint16_t vendor_id, device_id; 172 uint32_t ids; 173 pci_dev_t dev; 174 175 dev = PCI_BDF(bus, 31, 0); 176 pci_read_config_dword(dev, 0, &ids); 177 vendor_id = ids; 178 device_id = ids >> 16; 179 180 if (vendor_id == PCI_VENDOR_ID_INTEL) { 181 ich->dev = dev; 182 ich->ich_version = get_ich_version(device_id); 183 if (device_id == PCI_DEVICE_ID_INTEL_VALLEYVIEW_LPC) 184 ich->use_sbase = true; 185 return ich->ich_version == 0 ? -ENODEV : 0; 186 } 187 } 188 189 debug("ICH SPI: No ICH found.\n"); 190 return -ENODEV; 191 } 192 193 static int ich_init_controller(struct ich_spi_platdata *plat, 194 struct ich_spi_priv *ctlr) 195 { 196 uint8_t *rcrb; /* Root Complex Register Block */ 197 uint32_t rcba; /* Root Complex Base Address */ 198 uint32_t sbase_addr; 199 uint8_t *sbase; 200 201 pci_read_config_dword(plat->dev, 0xf0, &rcba); 202 /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */ 203 rcrb = (uint8_t *)(rcba & 0xffffc000); 204 205 /* SBASE is similar */ 206 pci_read_config_dword(plat->dev, 0x54, &sbase_addr); 207 sbase = (uint8_t *)(sbase_addr & 0xfffffe00); 208 209 if (plat->ich_version == 7) { 210 struct ich7_spi_regs *ich7_spi; 211 212 ich7_spi = (struct ich7_spi_regs *)(rcrb + 0x3020); 213 ctlr->ichspi_lock = readw(&ich7_spi->spis) & SPIS_LOCK; 214 ctlr->opmenu = offsetof(struct ich7_spi_regs, opmenu); 215 ctlr->menubytes = sizeof(ich7_spi->opmenu); 216 ctlr->optype = offsetof(struct ich7_spi_regs, optype); 217 ctlr->addr = offsetof(struct ich7_spi_regs, spia); 218 ctlr->data = offsetof(struct ich7_spi_regs, spid); 219 ctlr->databytes = sizeof(ich7_spi->spid); 220 ctlr->status = offsetof(struct ich7_spi_regs, spis); 221 ctlr->control = offsetof(struct ich7_spi_regs, spic); 222 ctlr->bbar = offsetof(struct ich7_spi_regs, bbar); 223 ctlr->preop = offsetof(struct ich7_spi_regs, preop); 224 ctlr->base = ich7_spi; 225 } else if (plat->ich_version == 9) { 226 struct ich9_spi_regs *ich9_spi; 227 228 if (plat->use_sbase) 229 ich9_spi = (struct ich9_spi_regs *)sbase; 230 else 231 ich9_spi = (struct ich9_spi_regs *)(rcrb + 0x3800); 232 ctlr->ichspi_lock = readw(&ich9_spi->hsfs) & HSFS_FLOCKDN; 233 ctlr->opmenu = offsetof(struct ich9_spi_regs, opmenu); 234 ctlr->menubytes = sizeof(ich9_spi->opmenu); 235 ctlr->optype = offsetof(struct ich9_spi_regs, optype); 236 ctlr->addr = offsetof(struct ich9_spi_regs, faddr); 237 ctlr->data = offsetof(struct ich9_spi_regs, fdata); 238 ctlr->databytes = sizeof(ich9_spi->fdata); 239 ctlr->status = offsetof(struct ich9_spi_regs, ssfs); 240 ctlr->control = offsetof(struct ich9_spi_regs, ssfc); 241 ctlr->speed = ctlr->control + 2; 242 ctlr->bbar = offsetof(struct ich9_spi_regs, bbar); 243 ctlr->preop = offsetof(struct ich9_spi_regs, preop); 244 ctlr->bcr = offsetof(struct ich9_spi_regs, bcr); 245 ctlr->pr = &ich9_spi->pr[0]; 246 ctlr->base = ich9_spi; 247 } else { 248 debug("ICH SPI: Unrecognised ICH version %d\n", 249 plat->ich_version); 250 return -EINVAL; 251 } 252 253 /* Work out the maximum speed we can support */ 254 ctlr->max_speed = 20000000; 255 if (plat->ich_version == 9 && ich9_can_do_33mhz(plat->dev)) 256 ctlr->max_speed = 33000000; 257 debug("ICH SPI: Version %d detected at %p, speed %ld\n", 258 plat->ich_version, ctlr->base, ctlr->max_speed); 259 260 ich_set_bbar(ctlr, 0); 261 262 return 0; 263 } 264 265 static inline void spi_use_out(struct spi_trans *trans, unsigned bytes) 266 { 267 trans->out += bytes; 268 trans->bytesout -= bytes; 269 } 270 271 static inline void spi_use_in(struct spi_trans *trans, unsigned bytes) 272 { 273 trans->in += bytes; 274 trans->bytesin -= bytes; 275 } 276 277 static void spi_setup_type(struct spi_trans *trans, int data_bytes) 278 { 279 trans->type = 0xFF; 280 281 /* Try to guess spi type from read/write sizes. */ 282 if (trans->bytesin == 0) { 283 if (trans->bytesout + data_bytes > 4) 284 /* 285 * If bytesin = 0 and bytesout > 4, we presume this is 286 * a write data operation, which is accompanied by an 287 * address. 288 */ 289 trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS; 290 else 291 trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS; 292 return; 293 } 294 295 if (trans->bytesout == 1) { /* and bytesin is > 0 */ 296 trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS; 297 return; 298 } 299 300 if (trans->bytesout == 4) /* and bytesin is > 0 */ 301 trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; 302 303 /* Fast read command is called with 5 bytes instead of 4 */ 304 if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) { 305 trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS; 306 --trans->bytesout; 307 } 308 } 309 310 static int spi_setup_opcode(struct ich_spi_priv *ctlr, struct spi_trans *trans) 311 { 312 uint16_t optypes; 313 uint8_t opmenu[ctlr->menubytes]; 314 315 trans->opcode = trans->out[0]; 316 spi_use_out(trans, 1); 317 if (!ctlr->ichspi_lock) { 318 /* The lock is off, so just use index 0. */ 319 ich_writeb(ctlr, trans->opcode, ctlr->opmenu); 320 optypes = ich_readw(ctlr, ctlr->optype); 321 optypes = (optypes & 0xfffc) | (trans->type & 0x3); 322 ich_writew(ctlr, optypes, ctlr->optype); 323 return 0; 324 } else { 325 /* The lock is on. See if what we need is on the menu. */ 326 uint8_t optype; 327 uint16_t opcode_index; 328 329 /* Write Enable is handled as atomic prefix */ 330 if (trans->opcode == SPI_OPCODE_WREN) 331 return 0; 332 333 read_reg(ctlr, ctlr->opmenu, opmenu, sizeof(opmenu)); 334 for (opcode_index = 0; opcode_index < ctlr->menubytes; 335 opcode_index++) { 336 if (opmenu[opcode_index] == trans->opcode) 337 break; 338 } 339 340 if (opcode_index == ctlr->menubytes) { 341 printf("ICH SPI: Opcode %x not found\n", 342 trans->opcode); 343 return -EINVAL; 344 } 345 346 optypes = ich_readw(ctlr, ctlr->optype); 347 optype = (optypes >> (opcode_index * 2)) & 0x3; 348 if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS && 349 optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS && 350 trans->bytesout >= 3) { 351 /* We guessed wrong earlier. Fix it up. */ 352 trans->type = optype; 353 } 354 if (optype != trans->type) { 355 printf("ICH SPI: Transaction doesn't fit type %d\n", 356 optype); 357 return -ENOSPC; 358 } 359 return opcode_index; 360 } 361 } 362 363 static int spi_setup_offset(struct spi_trans *trans) 364 { 365 /* Separate the SPI address and data. */ 366 switch (trans->type) { 367 case SPI_OPCODE_TYPE_READ_NO_ADDRESS: 368 case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS: 369 return 0; 370 case SPI_OPCODE_TYPE_READ_WITH_ADDRESS: 371 case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS: 372 trans->offset = ((uint32_t)trans->out[0] << 16) | 373 ((uint32_t)trans->out[1] << 8) | 374 ((uint32_t)trans->out[2] << 0); 375 spi_use_out(trans, 3); 376 return 1; 377 default: 378 printf("Unrecognized SPI transaction type %#x\n", trans->type); 379 return -EPROTO; 380 } 381 } 382 383 /* 384 * Wait for up to 6s til status register bit(s) turn 1 (in case wait_til_set 385 * below is true) or 0. In case the wait was for the bit(s) to set - write 386 * those bits back, which would cause resetting them. 387 * 388 * Return the last read status value on success or -1 on failure. 389 */ 390 static int ich_status_poll(struct ich_spi_priv *ctlr, u16 bitmask, 391 int wait_til_set) 392 { 393 int timeout = 600000; /* This will result in 6s */ 394 u16 status = 0; 395 396 while (timeout--) { 397 status = ich_readw(ctlr, ctlr->status); 398 if (wait_til_set ^ ((status & bitmask) == 0)) { 399 if (wait_til_set) { 400 ich_writew(ctlr, status & bitmask, 401 ctlr->status); 402 } 403 return status; 404 } 405 udelay(10); 406 } 407 408 printf("ICH SPI: SCIP timeout, read %x, expected %x\n", 409 status, bitmask); 410 return -ETIMEDOUT; 411 } 412 413 static int ich_spi_xfer(struct udevice *dev, unsigned int bitlen, 414 const void *dout, void *din, unsigned long flags) 415 { 416 struct udevice *bus = dev_get_parent(dev); 417 struct ich_spi_platdata *plat = dev_get_platdata(bus); 418 struct ich_spi_priv *ctlr = dev_get_priv(bus); 419 uint16_t control; 420 int16_t opcode_index; 421 int with_address; 422 int status; 423 int bytes = bitlen / 8; 424 struct spi_trans *trans = &ctlr->trans; 425 unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END); 426 int using_cmd = 0; 427 int ret; 428 429 /* We don't support writing partial bytes */ 430 if (bitlen % 8) { 431 debug("ICH SPI: Accessing partial bytes not supported\n"); 432 return -EPROTONOSUPPORT; 433 } 434 435 /* An empty end transaction can be ignored */ 436 if (type == SPI_XFER_END && !dout && !din) 437 return 0; 438 439 if (type & SPI_XFER_BEGIN) 440 memset(trans, '\0', sizeof(*trans)); 441 442 /* Dp we need to come back later to finish it? */ 443 if (dout && type == SPI_XFER_BEGIN) { 444 if (bytes > ICH_MAX_CMD_LEN) { 445 debug("ICH SPI: Command length limit exceeded\n"); 446 return -ENOSPC; 447 } 448 memcpy(trans->cmd, dout, bytes); 449 trans->cmd_len = bytes; 450 debug("ICH SPI: Saved %d bytes\n", bytes); 451 return 0; 452 } 453 454 /* 455 * We process a 'middle' spi_xfer() call, which has no 456 * SPI_XFER_BEGIN/END, as an independent transaction as if it had 457 * an end. We therefore repeat the command. This is because ICH 458 * seems to have no support for this, or because interest (in digging 459 * out the details and creating a special case in the code) is low. 460 */ 461 if (trans->cmd_len) { 462 trans->out = trans->cmd; 463 trans->bytesout = trans->cmd_len; 464 using_cmd = 1; 465 debug("ICH SPI: Using %d bytes\n", trans->cmd_len); 466 } else { 467 trans->out = dout; 468 trans->bytesout = dout ? bytes : 0; 469 } 470 471 trans->in = din; 472 trans->bytesin = din ? bytes : 0; 473 474 /* There has to always at least be an opcode. */ 475 if (!trans->bytesout) { 476 debug("ICH SPI: No opcode for transfer\n"); 477 return -EPROTO; 478 } 479 480 ret = ich_status_poll(ctlr, SPIS_SCIP, 0); 481 if (ret < 0) 482 return ret; 483 484 if (plat->ich_version == 7) 485 ich_writew(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status); 486 else 487 ich_writeb(ctlr, SPIS_CDS | SPIS_FCERR, ctlr->status); 488 489 spi_setup_type(trans, using_cmd ? bytes : 0); 490 opcode_index = spi_setup_opcode(ctlr, trans); 491 if (opcode_index < 0) 492 return -EINVAL; 493 with_address = spi_setup_offset(trans); 494 if (with_address < 0) 495 return -EINVAL; 496 497 if (trans->opcode == SPI_OPCODE_WREN) { 498 /* 499 * Treat Write Enable as Atomic Pre-Op if possible 500 * in order to prevent the Management Engine from 501 * issuing a transaction between WREN and DATA. 502 */ 503 if (!ctlr->ichspi_lock) 504 ich_writew(ctlr, trans->opcode, ctlr->preop); 505 return 0; 506 } 507 508 if (ctlr->speed && ctlr->max_speed >= 33000000) { 509 int byte; 510 511 byte = ich_readb(ctlr, ctlr->speed); 512 if (ctlr->cur_speed >= 33000000) 513 byte |= SSFC_SCF_33MHZ; 514 else 515 byte &= ~SSFC_SCF_33MHZ; 516 ich_writeb(ctlr, byte, ctlr->speed); 517 } 518 519 /* See if we have used up the command data */ 520 if (using_cmd && dout && bytes) { 521 trans->out = dout; 522 trans->bytesout = bytes; 523 debug("ICH SPI: Moving to data, %d bytes\n", bytes); 524 } 525 526 /* Preset control fields */ 527 control = ich_readw(ctlr, ctlr->control); 528 control &= ~SSFC_RESERVED; 529 control = SPIC_SCGO | ((opcode_index & 0x07) << 4); 530 531 /* Issue atomic preop cycle if needed */ 532 if (ich_readw(ctlr, ctlr->preop)) 533 control |= SPIC_ACS; 534 535 if (!trans->bytesout && !trans->bytesin) { 536 /* SPI addresses are 24 bit only */ 537 if (with_address) { 538 ich_writel(ctlr, trans->offset & 0x00FFFFFF, 539 ctlr->addr); 540 } 541 /* 542 * This is a 'no data' command (like Write Enable), its 543 * bitesout size was 1, decremented to zero while executing 544 * spi_setup_opcode() above. Tell the chip to send the 545 * command. 546 */ 547 ich_writew(ctlr, control, ctlr->control); 548 549 /* wait for the result */ 550 status = ich_status_poll(ctlr, SPIS_CDS | SPIS_FCERR, 1); 551 if (status < 0) 552 return status; 553 554 if (status & SPIS_FCERR) { 555 debug("ICH SPI: Command transaction error\n"); 556 return -EIO; 557 } 558 559 return 0; 560 } 561 562 /* 563 * Check if this is a write command atempting to transfer more bytes 564 * than the controller can handle. Iterations for writes are not 565 * supported here because each SPI write command needs to be preceded 566 * and followed by other SPI commands, and this sequence is controlled 567 * by the SPI chip driver. 568 */ 569 if (trans->bytesout > ctlr->databytes) { 570 debug("ICH SPI: Too much to write. This should be prevented by the driver's max_write_size?\n"); 571 return -EPROTO; 572 } 573 574 /* 575 * Read or write up to databytes bytes at a time until everything has 576 * been sent. 577 */ 578 while (trans->bytesout || trans->bytesin) { 579 uint32_t data_length; 580 581 /* SPI addresses are 24 bit only */ 582 ich_writel(ctlr, trans->offset & 0x00FFFFFF, ctlr->addr); 583 584 if (trans->bytesout) 585 data_length = min(trans->bytesout, ctlr->databytes); 586 else 587 data_length = min(trans->bytesin, ctlr->databytes); 588 589 /* Program data into FDATA0 to N */ 590 if (trans->bytesout) { 591 write_reg(ctlr, trans->out, ctlr->data, data_length); 592 spi_use_out(trans, data_length); 593 if (with_address) 594 trans->offset += data_length; 595 } 596 597 /* Add proper control fields' values */ 598 control &= ~((ctlr->databytes - 1) << 8); 599 control |= SPIC_DS; 600 control |= (data_length - 1) << 8; 601 602 /* write it */ 603 ich_writew(ctlr, control, ctlr->control); 604 605 /* Wait for Cycle Done Status or Flash Cycle Error. */ 606 status = ich_status_poll(ctlr, SPIS_CDS | SPIS_FCERR, 1); 607 if (status < 0) 608 return status; 609 610 if (status & SPIS_FCERR) { 611 debug("ICH SPI: Data transaction error %x\n", status); 612 return -EIO; 613 } 614 615 if (trans->bytesin) { 616 read_reg(ctlr, ctlr->data, trans->in, data_length); 617 spi_use_in(trans, data_length); 618 if (with_address) 619 trans->offset += data_length; 620 } 621 } 622 623 /* Clear atomic preop now that xfer is done */ 624 ich_writew(ctlr, 0, ctlr->preop); 625 626 return 0; 627 } 628 629 /* 630 * This uses the SPI controller from the Intel Cougar Point and Panther Point 631 * PCH to write-protect portions of the SPI flash until reboot. The changes 632 * don't actually take effect until the HSFS[FLOCKDN] bit is set, but that's 633 * done elsewhere. 634 */ 635 int spi_write_protect_region(struct udevice *dev, uint32_t lower_limit, 636 uint32_t length, int hint) 637 { 638 struct udevice *bus = dev->parent; 639 struct ich_spi_priv *ctlr = dev_get_priv(bus); 640 uint32_t tmplong; 641 uint32_t upper_limit; 642 643 if (!ctlr->pr) { 644 printf("%s: operation not supported on this chipset\n", 645 __func__); 646 return -ENOSYS; 647 } 648 649 if (length == 0 || 650 lower_limit > (0xFFFFFFFFUL - length) + 1 || 651 hint < 0 || hint > 4) { 652 printf("%s(0x%x, 0x%x, %d): invalid args\n", __func__, 653 lower_limit, length, hint); 654 return -EPERM; 655 } 656 657 upper_limit = lower_limit + length - 1; 658 659 /* 660 * Determine bits to write, as follows: 661 * 31 Write-protection enable (includes erase operation) 662 * 30:29 reserved 663 * 28:16 Upper Limit (FLA address bits 24:12, with 11:0 == 0xfff) 664 * 15 Read-protection enable 665 * 14:13 reserved 666 * 12:0 Lower Limit (FLA address bits 24:12, with 11:0 == 0x000) 667 */ 668 tmplong = 0x80000000 | 669 ((upper_limit & 0x01fff000) << 4) | 670 ((lower_limit & 0x01fff000) >> 12); 671 672 printf("%s: writing 0x%08x to %p\n", __func__, tmplong, 673 &ctlr->pr[hint]); 674 ctlr->pr[hint] = tmplong; 675 676 return 0; 677 } 678 679 static int ich_spi_probe(struct udevice *bus) 680 { 681 struct ich_spi_platdata *plat = dev_get_platdata(bus); 682 struct ich_spi_priv *priv = dev_get_priv(bus); 683 uint8_t bios_cntl; 684 int ret; 685 686 ret = ich_init_controller(plat, priv); 687 if (ret) 688 return ret; 689 /* 690 * Disable the BIOS write protect so write commands are allowed. On 691 * v9, deassert SMM BIOS Write Protect Disable. 692 */ 693 if (plat->use_sbase) { 694 bios_cntl = ich_readb(priv, priv->bcr); 695 bios_cntl &= ~BIT(5); /* clear Enable InSMM_STS (EISS) */ 696 bios_cntl |= 1; /* Write Protect Disable (WPD) */ 697 ich_writeb(priv, bios_cntl, priv->bcr); 698 } else { 699 pci_read_config_byte(plat->dev, 0xdc, &bios_cntl); 700 if (plat->ich_version == 9) 701 bios_cntl &= ~BIT(5); 702 pci_write_config_byte(plat->dev, 0xdc, bios_cntl | 0x1); 703 } 704 705 priv->cur_speed = priv->max_speed; 706 707 return 0; 708 } 709 710 static int ich_spi_ofdata_to_platdata(struct udevice *bus) 711 { 712 struct ich_spi_platdata *plat = dev_get_platdata(bus); 713 int ret; 714 715 ret = ich_find_spi_controller(plat); 716 if (ret) 717 return ret; 718 719 return 0; 720 } 721 722 static int ich_spi_set_speed(struct udevice *bus, uint speed) 723 { 724 struct ich_spi_priv *priv = dev_get_priv(bus); 725 726 priv->cur_speed = speed; 727 728 return 0; 729 } 730 731 static int ich_spi_set_mode(struct udevice *bus, uint mode) 732 { 733 debug("%s: mode=%d\n", __func__, mode); 734 735 return 0; 736 } 737 738 static int ich_spi_child_pre_probe(struct udevice *dev) 739 { 740 struct udevice *bus = dev_get_parent(dev); 741 struct ich_spi_platdata *plat = dev_get_platdata(bus); 742 struct ich_spi_priv *priv = dev_get_priv(bus); 743 struct spi_slave *slave = dev_get_parent_priv(dev); 744 745 /* 746 * Yes this controller can only write a small number of bytes at 747 * once! The limit is typically 64 bytes. 748 */ 749 slave->max_write_size = priv->databytes; 750 /* 751 * ICH 7 SPI controller only supports array read command 752 * and byte program command for SST flash 753 */ 754 if (plat->ich_version == 7) { 755 slave->mode_rx = SPI_RX_SLOW; 756 slave->mode = SPI_TX_BYTE; 757 } 758 759 return 0; 760 } 761 762 static const struct dm_spi_ops ich_spi_ops = { 763 .xfer = ich_spi_xfer, 764 .set_speed = ich_spi_set_speed, 765 .set_mode = ich_spi_set_mode, 766 /* 767 * cs_info is not needed, since we require all chip selects to be 768 * in the device tree explicitly 769 */ 770 }; 771 772 static const struct udevice_id ich_spi_ids[] = { 773 { .compatible = "intel,ich-spi" }, 774 { } 775 }; 776 777 U_BOOT_DRIVER(ich_spi) = { 778 .name = "ich_spi", 779 .id = UCLASS_SPI, 780 .of_match = ich_spi_ids, 781 .ops = &ich_spi_ops, 782 .ofdata_to_platdata = ich_spi_ofdata_to_platdata, 783 .platdata_auto_alloc_size = sizeof(struct ich_spi_platdata), 784 .priv_auto_alloc_size = sizeof(struct ich_spi_priv), 785 .child_pre_probe = ich_spi_child_pre_probe, 786 .probe = ich_spi_probe, 787 }; 788