1 /* 2 * Copyright 2013-2015 Freescale Semiconductor, Inc. 3 * 4 * Freescale Quad Serial Peripheral Interface (QSPI) driver 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <malloc.h> 11 #include <spi.h> 12 #include <asm/io.h> 13 #include <linux/sizes.h> 14 #include <dm.h> 15 #include <errno.h> 16 #include "fsl_qspi.h" 17 18 DECLARE_GLOBAL_DATA_PTR; 19 20 #define RX_BUFFER_SIZE 0x80 21 #ifdef CONFIG_MX6SX 22 #define TX_BUFFER_SIZE 0x200 23 #else 24 #define TX_BUFFER_SIZE 0x40 25 #endif 26 27 #define OFFSET_BITS_MASK 0x00ffffff 28 29 #define FLASH_STATUS_WEL 0x02 30 31 /* SEQID */ 32 #define SEQID_WREN 1 33 #define SEQID_FAST_READ 2 34 #define SEQID_RDSR 3 35 #define SEQID_SE 4 36 #define SEQID_CHIP_ERASE 5 37 #define SEQID_PP 6 38 #define SEQID_RDID 7 39 #define SEQID_BE_4K 8 40 #ifdef CONFIG_SPI_FLASH_BAR 41 #define SEQID_BRRD 9 42 #define SEQID_BRWR 10 43 #define SEQID_RDEAR 11 44 #define SEQID_WREAR 12 45 #endif 46 47 /* QSPI CMD */ 48 #define QSPI_CMD_PP 0x02 /* Page program (up to 256 bytes) */ 49 #define QSPI_CMD_RDSR 0x05 /* Read status register */ 50 #define QSPI_CMD_WREN 0x06 /* Write enable */ 51 #define QSPI_CMD_FAST_READ 0x0b /* Read data bytes (high frequency) */ 52 #define QSPI_CMD_BE_4K 0x20 /* 4K erase */ 53 #define QSPI_CMD_CHIP_ERASE 0xc7 /* Erase whole flash chip */ 54 #define QSPI_CMD_SE 0xd8 /* Sector erase (usually 64KiB) */ 55 #define QSPI_CMD_RDID 0x9f /* Read JEDEC ID */ 56 57 /* Used for Micron, winbond and Macronix flashes */ 58 #define QSPI_CMD_WREAR 0xc5 /* EAR register write */ 59 #define QSPI_CMD_RDEAR 0xc8 /* EAR reigster read */ 60 61 /* Used for Spansion flashes only. */ 62 #define QSPI_CMD_BRRD 0x16 /* Bank register read */ 63 #define QSPI_CMD_BRWR 0x17 /* Bank register write */ 64 65 /* 4-byte address QSPI CMD - used on Spansion and some Macronix flashes */ 66 #define QSPI_CMD_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ 67 #define QSPI_CMD_PP_4B 0x12 /* Page program (up to 256 bytes) */ 68 #define QSPI_CMD_SE_4B 0xdc /* Sector erase (usually 64KiB) */ 69 70 /* fsl_qspi_platdata flags */ 71 #define QSPI_FLAG_REGMAP_ENDIAN_BIG (1 << 0) 72 73 /* default SCK frequency, unit: HZ */ 74 #define FSL_QSPI_DEFAULT_SCK_FREQ 50000000 75 76 /* QSPI max chipselect signals number */ 77 #define FSL_QSPI_MAX_CHIPSELECT_NUM 4 78 79 #ifdef CONFIG_DM_SPI 80 /** 81 * struct fsl_qspi_platdata - platform data for Freescale QSPI 82 * 83 * @flags: Flags for QSPI QSPI_FLAG_... 84 * @speed_hz: Default SCK frequency 85 * @reg_base: Base address of QSPI registers 86 * @amba_base: Base address of QSPI memory mapping 87 * @amba_total_size: size of QSPI memory mapping 88 * @flash_num: Number of active slave devices 89 * @num_chipselect: Number of QSPI chipselect signals 90 */ 91 struct fsl_qspi_platdata { 92 u32 flags; 93 u32 speed_hz; 94 u32 reg_base; 95 u32 amba_base; 96 u32 amba_total_size; 97 u32 flash_num; 98 u32 num_chipselect; 99 }; 100 #endif 101 102 /** 103 * struct fsl_qspi_priv - private data for Freescale QSPI 104 * 105 * @flags: Flags for QSPI QSPI_FLAG_... 106 * @bus_clk: QSPI input clk frequency 107 * @speed_hz: Default SCK frequency 108 * @cur_seqid: current LUT table sequence id 109 * @sf_addr: flash access offset 110 * @amba_base: Base address of QSPI memory mapping of every CS 111 * @amba_total_size: size of QSPI memory mapping 112 * @cur_amba_base: Base address of QSPI memory mapping of current CS 113 * @flash_num: Number of active slave devices 114 * @num_chipselect: Number of QSPI chipselect signals 115 * @regs: Point to QSPI register structure for I/O access 116 */ 117 struct fsl_qspi_priv { 118 u32 flags; 119 u32 bus_clk; 120 u32 speed_hz; 121 u32 cur_seqid; 122 u32 sf_addr; 123 u32 amba_base[FSL_QSPI_MAX_CHIPSELECT_NUM]; 124 u32 amba_total_size; 125 u32 cur_amba_base; 126 u32 flash_num; 127 u32 num_chipselect; 128 struct fsl_qspi_regs *regs; 129 }; 130 131 #ifndef CONFIG_DM_SPI 132 struct fsl_qspi { 133 struct spi_slave slave; 134 struct fsl_qspi_priv priv; 135 }; 136 #endif 137 138 static u32 qspi_read32(u32 flags, u32 *addr) 139 { 140 return flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ? 141 in_be32(addr) : in_le32(addr); 142 } 143 144 static void qspi_write32(u32 flags, u32 *addr, u32 val) 145 { 146 flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ? 147 out_be32(addr, val) : out_le32(addr, val); 148 } 149 150 /* QSPI support swapping the flash read/write data 151 * in hardware for LS102xA, but not for VF610 */ 152 static inline u32 qspi_endian_xchg(u32 data) 153 { 154 #ifdef CONFIG_VF610 155 return swab32(data); 156 #else 157 return data; 158 #endif 159 } 160 161 static void qspi_set_lut(struct fsl_qspi_priv *priv) 162 { 163 struct fsl_qspi_regs *regs = priv->regs; 164 u32 lut_base; 165 166 /* Unlock the LUT */ 167 qspi_write32(priv->flags, ®s->lutkey, LUT_KEY_VALUE); 168 qspi_write32(priv->flags, ®s->lckcr, QSPI_LCKCR_UNLOCK); 169 170 /* Write Enable */ 171 lut_base = SEQID_WREN * 4; 172 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_WREN) | 173 PAD0(LUT_PAD1) | INSTR0(LUT_CMD)); 174 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0); 175 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 176 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 177 178 /* Fast Read */ 179 lut_base = SEQID_FAST_READ * 4; 180 #ifdef CONFIG_SPI_FLASH_BAR 181 qspi_write32(priv->flags, ®s->lut[lut_base], 182 OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) | 183 INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 184 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 185 #else 186 if (FSL_QSPI_FLASH_SIZE <= SZ_16M) 187 qspi_write32(priv->flags, ®s->lut[lut_base], 188 OPRND0(QSPI_CMD_FAST_READ) | PAD0(LUT_PAD1) | 189 INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 190 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 191 else 192 qspi_write32(priv->flags, ®s->lut[lut_base], 193 OPRND0(QSPI_CMD_FAST_READ_4B) | 194 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | 195 OPRND1(ADDR32BIT) | PAD1(LUT_PAD1) | 196 INSTR1(LUT_ADDR)); 197 #endif 198 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 199 OPRND0(8) | PAD0(LUT_PAD1) | INSTR0(LUT_DUMMY) | 200 OPRND1(RX_BUFFER_SIZE) | PAD1(LUT_PAD1) | 201 INSTR1(LUT_READ)); 202 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 203 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 204 205 /* Read Status */ 206 lut_base = SEQID_RDSR * 4; 207 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_RDSR) | 208 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | 209 PAD1(LUT_PAD1) | INSTR1(LUT_READ)); 210 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0); 211 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 212 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 213 214 /* Erase a sector */ 215 lut_base = SEQID_SE * 4; 216 #ifdef CONFIG_SPI_FLASH_BAR 217 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_SE) | 218 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 219 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 220 #else 221 if (FSL_QSPI_FLASH_SIZE <= SZ_16M) 222 qspi_write32(priv->flags, ®s->lut[lut_base], 223 OPRND0(QSPI_CMD_SE) | PAD0(LUT_PAD1) | 224 INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 225 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 226 else 227 qspi_write32(priv->flags, ®s->lut[lut_base], 228 OPRND0(QSPI_CMD_SE_4B) | PAD0(LUT_PAD1) | 229 INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | 230 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 231 #endif 232 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0); 233 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 234 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 235 236 /* Erase the whole chip */ 237 lut_base = SEQID_CHIP_ERASE * 4; 238 qspi_write32(priv->flags, ®s->lut[lut_base], 239 OPRND0(QSPI_CMD_CHIP_ERASE) | 240 PAD0(LUT_PAD1) | INSTR0(LUT_CMD)); 241 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0); 242 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 243 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 244 245 /* Page Program */ 246 lut_base = SEQID_PP * 4; 247 #ifdef CONFIG_SPI_FLASH_BAR 248 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_PP) | 249 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 250 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 251 #else 252 if (FSL_QSPI_FLASH_SIZE <= SZ_16M) 253 qspi_write32(priv->flags, ®s->lut[lut_base], 254 OPRND0(QSPI_CMD_PP) | PAD0(LUT_PAD1) | 255 INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 256 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 257 else 258 qspi_write32(priv->flags, ®s->lut[lut_base], 259 OPRND0(QSPI_CMD_PP_4B) | PAD0(LUT_PAD1) | 260 INSTR0(LUT_CMD) | OPRND1(ADDR32BIT) | 261 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 262 #endif 263 #ifdef CONFIG_MX6SX 264 /* 265 * To MX6SX, OPRND0(TX_BUFFER_SIZE) can not work correctly. 266 * So, Use IDATSZ in IPCR to determine the size and here set 0. 267 */ 268 qspi_write32(priv->flags, ®s->lut[lut_base + 1], OPRND0(0) | 269 PAD0(LUT_PAD1) | INSTR0(LUT_WRITE)); 270 #else 271 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 272 OPRND0(TX_BUFFER_SIZE) | 273 PAD0(LUT_PAD1) | INSTR0(LUT_WRITE)); 274 #endif 275 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 276 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 277 278 /* READ ID */ 279 lut_base = SEQID_RDID * 4; 280 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_RDID) | 281 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(8) | 282 PAD1(LUT_PAD1) | INSTR1(LUT_READ)); 283 qspi_write32(priv->flags, ®s->lut[lut_base + 1], 0); 284 qspi_write32(priv->flags, ®s->lut[lut_base + 2], 0); 285 qspi_write32(priv->flags, ®s->lut[lut_base + 3], 0); 286 287 /* SUB SECTOR 4K ERASE */ 288 lut_base = SEQID_BE_4K * 4; 289 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_BE_4K) | 290 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(ADDR24BIT) | 291 PAD1(LUT_PAD1) | INSTR1(LUT_ADDR)); 292 293 #ifdef CONFIG_SPI_FLASH_BAR 294 /* 295 * BRRD BRWR RDEAR WREAR are all supported, because it is hard to 296 * dynamically check whether to set BRRD BRWR or RDEAR WREAR during 297 * initialization. 298 */ 299 lut_base = SEQID_BRRD * 4; 300 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_BRRD) | 301 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | 302 PAD1(LUT_PAD1) | INSTR1(LUT_READ)); 303 304 lut_base = SEQID_BRWR * 4; 305 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_BRWR) | 306 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | 307 PAD1(LUT_PAD1) | INSTR1(LUT_WRITE)); 308 309 lut_base = SEQID_RDEAR * 4; 310 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_RDEAR) | 311 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | 312 PAD1(LUT_PAD1) | INSTR1(LUT_READ)); 313 314 lut_base = SEQID_WREAR * 4; 315 qspi_write32(priv->flags, ®s->lut[lut_base], OPRND0(QSPI_CMD_WREAR) | 316 PAD0(LUT_PAD1) | INSTR0(LUT_CMD) | OPRND1(1) | 317 PAD1(LUT_PAD1) | INSTR1(LUT_WRITE)); 318 #endif 319 /* Lock the LUT */ 320 qspi_write32(priv->flags, ®s->lutkey, LUT_KEY_VALUE); 321 qspi_write32(priv->flags, ®s->lckcr, QSPI_LCKCR_LOCK); 322 } 323 324 #if defined(CONFIG_SYS_FSL_QSPI_AHB) 325 /* 326 * If we have changed the content of the flash by writing or erasing, 327 * we need to invalidate the AHB buffer. If we do not do so, we may read out 328 * the wrong data. The spec tells us reset the AHB domain and Serial Flash 329 * domain at the same time. 330 */ 331 static inline void qspi_ahb_invalid(struct fsl_qspi_priv *priv) 332 { 333 struct fsl_qspi_regs *regs = priv->regs; 334 u32 reg; 335 336 reg = qspi_read32(priv->flags, ®s->mcr); 337 reg |= QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK; 338 qspi_write32(priv->flags, ®s->mcr, reg); 339 340 /* 341 * The minimum delay : 1 AHB + 2 SFCK clocks. 342 * Delay 1 us is enough. 343 */ 344 udelay(1); 345 346 reg &= ~(QSPI_MCR_SWRSTHD_MASK | QSPI_MCR_SWRSTSD_MASK); 347 qspi_write32(priv->flags, ®s->mcr, reg); 348 } 349 350 /* Read out the data from the AHB buffer. */ 351 static inline void qspi_ahb_read(struct fsl_qspi_priv *priv, u8 *rxbuf, int len) 352 { 353 struct fsl_qspi_regs *regs = priv->regs; 354 u32 mcr_reg; 355 356 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 357 358 qspi_write32(priv->flags, ®s->mcr, 359 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 360 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 361 362 /* Read out the data directly from the AHB buffer. */ 363 memcpy(rxbuf, (u8 *)(priv->cur_amba_base + priv->sf_addr), len); 364 365 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 366 } 367 368 static void qspi_enable_ddr_mode(struct fsl_qspi_priv *priv) 369 { 370 u32 reg, reg2; 371 struct fsl_qspi_regs *regs = priv->regs; 372 373 reg = qspi_read32(priv->flags, ®s->mcr); 374 /* Disable the module */ 375 qspi_write32(priv->flags, ®s->mcr, reg | QSPI_MCR_MDIS_MASK); 376 377 /* Set the Sampling Register for DDR */ 378 reg2 = qspi_read32(priv->flags, ®s->smpr); 379 reg2 &= ~QSPI_SMPR_DDRSMP_MASK; 380 reg2 |= (2 << QSPI_SMPR_DDRSMP_SHIFT); 381 qspi_write32(priv->flags, ®s->smpr, reg2); 382 383 /* Enable the module again (enable the DDR too) */ 384 reg |= QSPI_MCR_DDR_EN_MASK; 385 /* Enable bit 29 for imx6sx */ 386 reg |= (1 << 29); 387 388 qspi_write32(priv->flags, ®s->mcr, reg); 389 } 390 391 /* 392 * There are two different ways to read out the data from the flash: 393 * the "IP Command Read" and the "AHB Command Read". 394 * 395 * The IC guy suggests we use the "AHB Command Read" which is faster 396 * then the "IP Command Read". (What's more is that there is a bug in 397 * the "IP Command Read" in the Vybrid.) 398 * 399 * After we set up the registers for the "AHB Command Read", we can use 400 * the memcpy to read the data directly. A "missed" access to the buffer 401 * causes the controller to clear the buffer, and use the sequence pointed 402 * by the QUADSPI_BFGENCR[SEQID] to initiate a read from the flash. 403 */ 404 static void qspi_init_ahb_read(struct fsl_qspi_priv *priv) 405 { 406 struct fsl_qspi_regs *regs = priv->regs; 407 408 /* AHB configuration for access buffer 0/1/2 .*/ 409 qspi_write32(priv->flags, ®s->buf0cr, QSPI_BUFXCR_INVALID_MSTRID); 410 qspi_write32(priv->flags, ®s->buf1cr, QSPI_BUFXCR_INVALID_MSTRID); 411 qspi_write32(priv->flags, ®s->buf2cr, QSPI_BUFXCR_INVALID_MSTRID); 412 qspi_write32(priv->flags, ®s->buf3cr, QSPI_BUF3CR_ALLMST_MASK | 413 (0x80 << QSPI_BUF3CR_ADATSZ_SHIFT)); 414 415 /* We only use the buffer3 */ 416 qspi_write32(priv->flags, ®s->buf0ind, 0); 417 qspi_write32(priv->flags, ®s->buf1ind, 0); 418 qspi_write32(priv->flags, ®s->buf2ind, 0); 419 420 /* 421 * Set the default lut sequence for AHB Read. 422 * Parallel mode is disabled. 423 */ 424 qspi_write32(priv->flags, ®s->bfgencr, 425 SEQID_FAST_READ << QSPI_BFGENCR_SEQID_SHIFT); 426 427 /*Enable DDR Mode*/ 428 qspi_enable_ddr_mode(priv); 429 } 430 #endif 431 432 #ifdef CONFIG_SPI_FLASH_BAR 433 /* Bank register read/write, EAR register read/write */ 434 static void qspi_op_rdbank(struct fsl_qspi_priv *priv, u8 *rxbuf, u32 len) 435 { 436 struct fsl_qspi_regs *regs = priv->regs; 437 u32 reg, mcr_reg, data, seqid; 438 439 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 440 qspi_write32(priv->flags, ®s->mcr, 441 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 442 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 443 qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS); 444 445 qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base); 446 447 if (priv->cur_seqid == QSPI_CMD_BRRD) 448 seqid = SEQID_BRRD; 449 else 450 seqid = SEQID_RDEAR; 451 452 qspi_write32(priv->flags, ®s->ipcr, 453 (seqid << QSPI_IPCR_SEQID_SHIFT) | len); 454 455 /* Wait previous command complete */ 456 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 457 ; 458 459 while (1) { 460 reg = qspi_read32(priv->flags, ®s->rbsr); 461 if (reg & QSPI_RBSR_RDBFL_MASK) { 462 data = qspi_read32(priv->flags, ®s->rbdr[0]); 463 data = qspi_endian_xchg(data); 464 memcpy(rxbuf, &data, len); 465 qspi_write32(priv->flags, ®s->mcr, 466 qspi_read32(priv->flags, ®s->mcr) | 467 QSPI_MCR_CLR_RXF_MASK); 468 break; 469 } 470 } 471 472 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 473 } 474 #endif 475 476 static void qspi_op_rdid(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len) 477 { 478 struct fsl_qspi_regs *regs = priv->regs; 479 u32 mcr_reg, rbsr_reg, data; 480 int i, size; 481 482 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 483 qspi_write32(priv->flags, ®s->mcr, 484 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 485 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 486 qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS); 487 488 qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base); 489 490 qspi_write32(priv->flags, ®s->ipcr, 491 (SEQID_RDID << QSPI_IPCR_SEQID_SHIFT) | 0); 492 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 493 ; 494 495 i = 0; 496 size = len; 497 while ((RX_BUFFER_SIZE >= size) && (size > 0)) { 498 rbsr_reg = qspi_read32(priv->flags, ®s->rbsr); 499 if (rbsr_reg & QSPI_RBSR_RDBFL_MASK) { 500 data = qspi_read32(priv->flags, ®s->rbdr[i]); 501 data = qspi_endian_xchg(data); 502 memcpy(rxbuf, &data, 4); 503 rxbuf++; 504 size -= 4; 505 i++; 506 } 507 } 508 509 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 510 } 511 512 #ifndef CONFIG_SYS_FSL_QSPI_AHB 513 /* If not use AHB read, read data from ip interface */ 514 static void qspi_op_read(struct fsl_qspi_priv *priv, u32 *rxbuf, u32 len) 515 { 516 struct fsl_qspi_regs *regs = priv->regs; 517 u32 mcr_reg, data; 518 int i, size; 519 u32 to_or_from; 520 521 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 522 qspi_write32(priv->flags, ®s->mcr, 523 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 524 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 525 qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS); 526 527 to_or_from = priv->sf_addr + priv->cur_amba_base; 528 529 while (len > 0) { 530 qspi_write32(priv->flags, ®s->sfar, to_or_from); 531 532 size = (len > RX_BUFFER_SIZE) ? 533 RX_BUFFER_SIZE : len; 534 535 qspi_write32(priv->flags, ®s->ipcr, 536 (SEQID_FAST_READ << QSPI_IPCR_SEQID_SHIFT) | 537 size); 538 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 539 ; 540 541 to_or_from += size; 542 len -= size; 543 544 i = 0; 545 while ((RX_BUFFER_SIZE >= size) && (size > 0)) { 546 data = qspi_read32(priv->flags, ®s->rbdr[i]); 547 data = qspi_endian_xchg(data); 548 memcpy(rxbuf, &data, 4); 549 rxbuf++; 550 size -= 4; 551 i++; 552 } 553 qspi_write32(priv->flags, ®s->mcr, 554 qspi_read32(priv->flags, ®s->mcr) | 555 QSPI_MCR_CLR_RXF_MASK); 556 } 557 558 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 559 } 560 #endif 561 562 static void qspi_op_write(struct fsl_qspi_priv *priv, u8 *txbuf, u32 len) 563 { 564 struct fsl_qspi_regs *regs = priv->regs; 565 u32 mcr_reg, data, reg, status_reg, seqid; 566 int i, size, tx_size; 567 u32 to_or_from = 0; 568 569 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 570 qspi_write32(priv->flags, ®s->mcr, 571 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 572 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 573 qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS); 574 575 status_reg = 0; 576 while ((status_reg & FLASH_STATUS_WEL) != FLASH_STATUS_WEL) { 577 qspi_write32(priv->flags, ®s->ipcr, 578 (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0); 579 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 580 ; 581 582 qspi_write32(priv->flags, ®s->ipcr, 583 (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 1); 584 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 585 ; 586 587 reg = qspi_read32(priv->flags, ®s->rbsr); 588 if (reg & QSPI_RBSR_RDBFL_MASK) { 589 status_reg = qspi_read32(priv->flags, ®s->rbdr[0]); 590 status_reg = qspi_endian_xchg(status_reg); 591 } 592 qspi_write32(priv->flags, ®s->mcr, 593 qspi_read32(priv->flags, ®s->mcr) | 594 QSPI_MCR_CLR_RXF_MASK); 595 } 596 597 /* Default is page programming */ 598 seqid = SEQID_PP; 599 #ifdef CONFIG_SPI_FLASH_BAR 600 if (priv->cur_seqid == QSPI_CMD_BRWR) 601 seqid = SEQID_BRWR; 602 else if (priv->cur_seqid == QSPI_CMD_WREAR) 603 seqid = SEQID_WREAR; 604 #endif 605 606 to_or_from = priv->sf_addr + priv->cur_amba_base; 607 608 qspi_write32(priv->flags, ®s->sfar, to_or_from); 609 610 tx_size = (len > TX_BUFFER_SIZE) ? 611 TX_BUFFER_SIZE : len; 612 613 size = tx_size / 4; 614 for (i = 0; i < size; i++) { 615 memcpy(&data, txbuf, 4); 616 data = qspi_endian_xchg(data); 617 qspi_write32(priv->flags, ®s->tbdr, data); 618 txbuf += 4; 619 } 620 621 size = tx_size % 4; 622 if (size) { 623 data = 0; 624 memcpy(&data, txbuf, size); 625 data = qspi_endian_xchg(data); 626 qspi_write32(priv->flags, ®s->tbdr, data); 627 } 628 629 qspi_write32(priv->flags, ®s->ipcr, 630 (seqid << QSPI_IPCR_SEQID_SHIFT) | tx_size); 631 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 632 ; 633 634 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 635 } 636 637 static void qspi_op_rdsr(struct fsl_qspi_priv *priv, u32 *rxbuf) 638 { 639 struct fsl_qspi_regs *regs = priv->regs; 640 u32 mcr_reg, reg, data; 641 642 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 643 qspi_write32(priv->flags, ®s->mcr, 644 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 645 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 646 qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS); 647 648 qspi_write32(priv->flags, ®s->sfar, priv->cur_amba_base); 649 650 qspi_write32(priv->flags, ®s->ipcr, 651 (SEQID_RDSR << QSPI_IPCR_SEQID_SHIFT) | 0); 652 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 653 ; 654 655 while (1) { 656 reg = qspi_read32(priv->flags, ®s->rbsr); 657 if (reg & QSPI_RBSR_RDBFL_MASK) { 658 data = qspi_read32(priv->flags, ®s->rbdr[0]); 659 data = qspi_endian_xchg(data); 660 memcpy(rxbuf, &data, 4); 661 qspi_write32(priv->flags, ®s->mcr, 662 qspi_read32(priv->flags, ®s->mcr) | 663 QSPI_MCR_CLR_RXF_MASK); 664 break; 665 } 666 } 667 668 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 669 } 670 671 static void qspi_op_erase(struct fsl_qspi_priv *priv) 672 { 673 struct fsl_qspi_regs *regs = priv->regs; 674 u32 mcr_reg; 675 u32 to_or_from = 0; 676 677 mcr_reg = qspi_read32(priv->flags, ®s->mcr); 678 qspi_write32(priv->flags, ®s->mcr, 679 QSPI_MCR_CLR_RXF_MASK | QSPI_MCR_CLR_TXF_MASK | 680 QSPI_MCR_RESERVED_MASK | QSPI_MCR_END_CFD_LE); 681 qspi_write32(priv->flags, ®s->rbct, QSPI_RBCT_RXBRD_USEIPS); 682 683 to_or_from = priv->sf_addr + priv->cur_amba_base; 684 qspi_write32(priv->flags, ®s->sfar, to_or_from); 685 686 qspi_write32(priv->flags, ®s->ipcr, 687 (SEQID_WREN << QSPI_IPCR_SEQID_SHIFT) | 0); 688 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 689 ; 690 691 if (priv->cur_seqid == QSPI_CMD_SE) { 692 qspi_write32(priv->flags, ®s->ipcr, 693 (SEQID_SE << QSPI_IPCR_SEQID_SHIFT) | 0); 694 } else if (priv->cur_seqid == QSPI_CMD_BE_4K) { 695 qspi_write32(priv->flags, ®s->ipcr, 696 (SEQID_BE_4K << QSPI_IPCR_SEQID_SHIFT) | 0); 697 } 698 while (qspi_read32(priv->flags, ®s->sr) & QSPI_SR_BUSY_MASK) 699 ; 700 701 qspi_write32(priv->flags, ®s->mcr, mcr_reg); 702 } 703 704 int qspi_xfer(struct fsl_qspi_priv *priv, unsigned int bitlen, 705 const void *dout, void *din, unsigned long flags) 706 { 707 u32 bytes = DIV_ROUND_UP(bitlen, 8); 708 static u32 wr_sfaddr; 709 u32 txbuf; 710 711 if (dout) { 712 if (flags & SPI_XFER_BEGIN) { 713 priv->cur_seqid = *(u8 *)dout; 714 memcpy(&txbuf, dout, 4); 715 } 716 717 if (flags == SPI_XFER_END) { 718 priv->sf_addr = wr_sfaddr; 719 qspi_op_write(priv, (u8 *)dout, bytes); 720 return 0; 721 } 722 723 if (priv->cur_seqid == QSPI_CMD_FAST_READ) { 724 priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK; 725 } else if ((priv->cur_seqid == QSPI_CMD_SE) || 726 (priv->cur_seqid == QSPI_CMD_BE_4K)) { 727 priv->sf_addr = swab32(txbuf) & OFFSET_BITS_MASK; 728 qspi_op_erase(priv); 729 } else if (priv->cur_seqid == QSPI_CMD_PP) { 730 wr_sfaddr = swab32(txbuf) & OFFSET_BITS_MASK; 731 } else if ((priv->cur_seqid == QSPI_CMD_BRWR) || 732 (priv->cur_seqid == QSPI_CMD_WREAR)) { 733 #ifdef CONFIG_SPI_FLASH_BAR 734 wr_sfaddr = 0; 735 #endif 736 } 737 } 738 739 if (din) { 740 if (priv->cur_seqid == QSPI_CMD_FAST_READ) { 741 #ifdef CONFIG_SYS_FSL_QSPI_AHB 742 qspi_ahb_read(priv, din, bytes); 743 #else 744 qspi_op_read(priv, din, bytes); 745 #endif 746 } else if (priv->cur_seqid == QSPI_CMD_RDID) 747 qspi_op_rdid(priv, din, bytes); 748 else if (priv->cur_seqid == QSPI_CMD_RDSR) 749 qspi_op_rdsr(priv, din); 750 #ifdef CONFIG_SPI_FLASH_BAR 751 else if ((priv->cur_seqid == QSPI_CMD_BRRD) || 752 (priv->cur_seqid == QSPI_CMD_RDEAR)) { 753 priv->sf_addr = 0; 754 qspi_op_rdbank(priv, din, bytes); 755 } 756 #endif 757 } 758 759 #ifdef CONFIG_SYS_FSL_QSPI_AHB 760 if ((priv->cur_seqid == QSPI_CMD_SE) || 761 (priv->cur_seqid == QSPI_CMD_PP) || 762 (priv->cur_seqid == QSPI_CMD_BE_4K) || 763 (priv->cur_seqid == QSPI_CMD_WREAR) || 764 (priv->cur_seqid == QSPI_CMD_BRWR)) 765 qspi_ahb_invalid(priv); 766 #endif 767 768 return 0; 769 } 770 771 void qspi_module_disable(struct fsl_qspi_priv *priv, u8 disable) 772 { 773 u32 mcr_val; 774 775 mcr_val = qspi_read32(priv->flags, &priv->regs->mcr); 776 if (disable) 777 mcr_val |= QSPI_MCR_MDIS_MASK; 778 else 779 mcr_val &= ~QSPI_MCR_MDIS_MASK; 780 qspi_write32(priv->flags, &priv->regs->mcr, mcr_val); 781 } 782 783 void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits) 784 { 785 u32 smpr_val; 786 787 smpr_val = qspi_read32(priv->flags, &priv->regs->smpr); 788 smpr_val &= ~clear_bits; 789 smpr_val |= set_bits; 790 qspi_write32(priv->flags, &priv->regs->smpr, smpr_val); 791 } 792 #ifndef CONFIG_DM_SPI 793 static unsigned long spi_bases[] = { 794 QSPI0_BASE_ADDR, 795 #ifdef CONFIG_MX6SX 796 QSPI1_BASE_ADDR, 797 #endif 798 }; 799 800 static unsigned long amba_bases[] = { 801 QSPI0_AMBA_BASE, 802 #ifdef CONFIG_MX6SX 803 QSPI1_AMBA_BASE, 804 #endif 805 }; 806 807 static inline struct fsl_qspi *to_qspi_spi(struct spi_slave *slave) 808 { 809 return container_of(slave, struct fsl_qspi, slave); 810 } 811 812 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, 813 unsigned int max_hz, unsigned int mode) 814 { 815 struct fsl_qspi *qspi; 816 struct fsl_qspi_regs *regs; 817 u32 total_size; 818 819 if (bus >= ARRAY_SIZE(spi_bases)) 820 return NULL; 821 822 if (cs >= FSL_QSPI_FLASH_NUM) 823 return NULL; 824 825 qspi = spi_alloc_slave(struct fsl_qspi, bus, cs); 826 if (!qspi) 827 return NULL; 828 829 #ifdef CONFIG_SYS_FSL_QSPI_BE 830 qspi->priv.flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG; 831 #endif 832 833 regs = (struct fsl_qspi_regs *)spi_bases[bus]; 834 qspi->priv.regs = regs; 835 /* 836 * According cs, use different amba_base to choose the 837 * corresponding flash devices. 838 * 839 * If not, only one flash device is used even if passing 840 * different cs using `sf probe` 841 */ 842 qspi->priv.cur_amba_base = amba_bases[bus] + cs * FSL_QSPI_FLASH_SIZE; 843 844 qspi->slave.max_write_size = TX_BUFFER_SIZE; 845 846 qspi_write32(qspi->priv.flags, ®s->mcr, 847 QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK); 848 849 qspi_cfg_smpr(&qspi->priv, 850 ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK | 851 QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0); 852 853 total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM; 854 /* 855 * Any read access to non-implemented addresses will provide 856 * undefined results. 857 * 858 * In case single die flash devices, TOP_ADDR_MEMA2 and 859 * TOP_ADDR_MEMB2 should be initialized/programmed to 860 * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect, 861 * setting the size of these devices to 0. This would ensure 862 * that the complete memory map is assigned to only one flash device. 863 */ 864 qspi_write32(qspi->priv.flags, ®s->sfa1ad, 865 FSL_QSPI_FLASH_SIZE | amba_bases[bus]); 866 qspi_write32(qspi->priv.flags, ®s->sfa2ad, 867 FSL_QSPI_FLASH_SIZE | amba_bases[bus]); 868 qspi_write32(qspi->priv.flags, ®s->sfb1ad, 869 total_size | amba_bases[bus]); 870 qspi_write32(qspi->priv.flags, ®s->sfb2ad, 871 total_size | amba_bases[bus]); 872 873 qspi_set_lut(&qspi->priv); 874 875 #ifdef CONFIG_SYS_FSL_QSPI_AHB 876 qspi_init_ahb_read(&qspi->priv); 877 #endif 878 879 qspi_module_disable(&qspi->priv, 0); 880 881 return &qspi->slave; 882 } 883 884 void spi_free_slave(struct spi_slave *slave) 885 { 886 struct fsl_qspi *qspi = to_qspi_spi(slave); 887 888 free(qspi); 889 } 890 891 int spi_claim_bus(struct spi_slave *slave) 892 { 893 return 0; 894 } 895 896 void spi_release_bus(struct spi_slave *slave) 897 { 898 /* Nothing to do */ 899 } 900 901 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 902 const void *dout, void *din, unsigned long flags) 903 { 904 struct fsl_qspi *qspi = to_qspi_spi(slave); 905 906 return qspi_xfer(&qspi->priv, bitlen, dout, din, flags); 907 } 908 909 void spi_init(void) 910 { 911 /* Nothing to do */ 912 } 913 #else 914 static int fsl_qspi_child_pre_probe(struct udevice *dev) 915 { 916 struct spi_slave *slave = dev_get_parentdata(dev); 917 918 slave->max_write_size = TX_BUFFER_SIZE; 919 920 return 0; 921 } 922 923 static int fsl_qspi_probe(struct udevice *bus) 924 { 925 u32 total_size; 926 struct fsl_qspi_platdata *plat = dev_get_platdata(bus); 927 struct fsl_qspi_priv *priv = dev_get_priv(bus); 928 struct dm_spi_bus *dm_spi_bus; 929 930 dm_spi_bus = bus->uclass_priv; 931 932 dm_spi_bus->max_hz = plat->speed_hz; 933 934 priv->regs = (struct fsl_qspi_regs *)plat->reg_base; 935 priv->flags = plat->flags; 936 937 priv->speed_hz = plat->speed_hz; 938 priv->amba_base[0] = plat->amba_base; 939 priv->amba_total_size = plat->amba_total_size; 940 priv->flash_num = plat->flash_num; 941 priv->num_chipselect = plat->num_chipselect; 942 943 qspi_write32(priv->flags, &priv->regs->mcr, 944 QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK); 945 946 qspi_cfg_smpr(priv, ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK | 947 QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0); 948 949 total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM; 950 /* 951 * Any read access to non-implemented addresses will provide 952 * undefined results. 953 * 954 * In case single die flash devices, TOP_ADDR_MEMA2 and 955 * TOP_ADDR_MEMB2 should be initialized/programmed to 956 * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect, 957 * setting the size of these devices to 0. This would ensure 958 * that the complete memory map is assigned to only one flash device. 959 */ 960 qspi_write32(priv->flags, &priv->regs->sfa1ad, 961 FSL_QSPI_FLASH_SIZE | priv->amba_base[0]); 962 qspi_write32(priv->flags, &priv->regs->sfa2ad, 963 FSL_QSPI_FLASH_SIZE | priv->amba_base[0]); 964 qspi_write32(priv->flags, &priv->regs->sfb1ad, 965 total_size | priv->amba_base[0]); 966 qspi_write32(priv->flags, &priv->regs->sfb2ad, 967 total_size | priv->amba_base[0]); 968 969 qspi_set_lut(priv); 970 971 #ifdef CONFIG_SYS_FSL_QSPI_AHB 972 qspi_init_ahb_read(priv); 973 #endif 974 975 qspi_module_disable(priv, 0); 976 977 return 0; 978 } 979 980 static int fsl_qspi_ofdata_to_platdata(struct udevice *bus) 981 { 982 struct reg_data { 983 u32 addr; 984 u32 size; 985 } regs_data[2]; 986 struct fsl_qspi_platdata *plat = bus->platdata; 987 const void *blob = gd->fdt_blob; 988 int node = bus->of_offset; 989 int ret, flash_num = 0, subnode; 990 991 if (fdtdec_get_bool(blob, node, "big-endian")) 992 plat->flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG; 993 994 ret = fdtdec_get_int_array(blob, node, "reg", (u32 *)regs_data, 995 sizeof(regs_data)/sizeof(u32)); 996 if (ret) { 997 debug("Error: can't get base addresses (ret = %d)!\n", ret); 998 return -ENOMEM; 999 } 1000 1001 /* Count flash numbers */ 1002 fdt_for_each_subnode(blob, subnode, node) 1003 ++flash_num; 1004 1005 if (flash_num == 0) { 1006 debug("Error: Missing flashes!\n"); 1007 return -ENODEV; 1008 } 1009 1010 plat->speed_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 1011 FSL_QSPI_DEFAULT_SCK_FREQ); 1012 plat->num_chipselect = fdtdec_get_int(blob, node, "num-cs", 1013 FSL_QSPI_MAX_CHIPSELECT_NUM); 1014 1015 plat->reg_base = regs_data[0].addr; 1016 plat->amba_base = regs_data[1].addr; 1017 plat->amba_total_size = regs_data[1].size; 1018 plat->flash_num = flash_num; 1019 1020 debug("%s: regs=<0x%x> <0x%x, 0x%x>, max-frequency=%d, endianess=%s\n", 1021 __func__, 1022 plat->reg_base, 1023 plat->amba_base, 1024 plat->amba_total_size, 1025 plat->speed_hz, 1026 plat->flags & QSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le" 1027 ); 1028 1029 return 0; 1030 } 1031 1032 static int fsl_qspi_xfer(struct udevice *dev, unsigned int bitlen, 1033 const void *dout, void *din, unsigned long flags) 1034 { 1035 struct fsl_qspi_priv *priv; 1036 struct udevice *bus; 1037 1038 bus = dev->parent; 1039 priv = dev_get_priv(bus); 1040 1041 return qspi_xfer(priv, bitlen, dout, din, flags); 1042 } 1043 1044 static int fsl_qspi_claim_bus(struct udevice *dev) 1045 { 1046 struct fsl_qspi_priv *priv; 1047 struct udevice *bus; 1048 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); 1049 1050 bus = dev->parent; 1051 priv = dev_get_priv(bus); 1052 1053 priv->cur_amba_base = 1054 priv->amba_base[0] + FSL_QSPI_FLASH_SIZE * slave_plat->cs; 1055 1056 qspi_module_disable(priv, 0); 1057 1058 return 0; 1059 } 1060 1061 static int fsl_qspi_release_bus(struct udevice *dev) 1062 { 1063 struct fsl_qspi_priv *priv; 1064 struct udevice *bus; 1065 1066 bus = dev->parent; 1067 priv = dev_get_priv(bus); 1068 1069 qspi_module_disable(priv, 1); 1070 1071 return 0; 1072 } 1073 1074 static int fsl_qspi_set_speed(struct udevice *bus, uint speed) 1075 { 1076 /* Nothing to do */ 1077 return 0; 1078 } 1079 1080 static int fsl_qspi_set_mode(struct udevice *bus, uint mode) 1081 { 1082 /* Nothing to do */ 1083 return 0; 1084 } 1085 1086 static const struct dm_spi_ops fsl_qspi_ops = { 1087 .claim_bus = fsl_qspi_claim_bus, 1088 .release_bus = fsl_qspi_release_bus, 1089 .xfer = fsl_qspi_xfer, 1090 .set_speed = fsl_qspi_set_speed, 1091 .set_mode = fsl_qspi_set_mode, 1092 }; 1093 1094 static const struct udevice_id fsl_qspi_ids[] = { 1095 { .compatible = "fsl,vf610-qspi" }, 1096 { .compatible = "fsl,imx6sx-qspi" }, 1097 { } 1098 }; 1099 1100 U_BOOT_DRIVER(fsl_qspi) = { 1101 .name = "fsl_qspi", 1102 .id = UCLASS_SPI, 1103 .of_match = fsl_qspi_ids, 1104 .ops = &fsl_qspi_ops, 1105 .ofdata_to_platdata = fsl_qspi_ofdata_to_platdata, 1106 .platdata_auto_alloc_size = sizeof(struct fsl_qspi_platdata), 1107 .priv_auto_alloc_size = sizeof(struct fsl_qspi_priv), 1108 .probe = fsl_qspi_probe, 1109 .child_pre_probe = fsl_qspi_child_pre_probe, 1110 }; 1111 #endif 1112