xref: /openbmc/u-boot/drivers/spi/cf_spi.c (revision 730d2544)
1 /*
2  *
3  * (C) Copyright 2000-2003
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  *
6  * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
7  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #include <common.h>
13 #include <spi.h>
14 #include <malloc.h>
15 #include <asm/immap.h>
16 
17 struct cf_spi_slave {
18 	struct spi_slave slave;
19 	uint baudrate;
20 	int charbit;
21 };
22 
23 extern void cfspi_port_conf(void);
24 extern int cfspi_claim_bus(uint bus, uint cs);
25 extern void cfspi_release_bus(uint bus, uint cs);
26 
27 DECLARE_GLOBAL_DATA_PTR;
28 
29 #ifndef CONFIG_SPI_IDLE_VAL
30 #if defined(CONFIG_SPI_MMC)
31 #define CONFIG_SPI_IDLE_VAL	0xFFFF
32 #else
33 #define CONFIG_SPI_IDLE_VAL	0x0
34 #endif
35 #endif
36 
37 #if defined(CONFIG_CF_DSPI)
38 /* DSPI specific mode */
39 #define SPI_MODE_MOD	0x00200000
40 #define SPI_DBLRATE	0x00100000
41 
42 static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave)
43 {
44 	return container_of(slave, struct cf_spi_slave, slave);
45 }
46 
47 static void cfspi_init(void)
48 {
49 	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
50 
51 	cfspi_port_conf();	/* port configuration */
52 
53 	dspi->mcr = DSPI_MCR_MSTR | DSPI_MCR_CSIS7 | DSPI_MCR_CSIS6 |
54 	    DSPI_MCR_CSIS5 | DSPI_MCR_CSIS4 | DSPI_MCR_CSIS3 |
55 	    DSPI_MCR_CSIS2 | DSPI_MCR_CSIS1 | DSPI_MCR_CSIS0 |
56 	    DSPI_MCR_CRXF | DSPI_MCR_CTXF;
57 
58 	/* Default setting in platform configuration */
59 #ifdef CONFIG_SYS_DSPI_CTAR0
60 	dspi->ctar[0] = CONFIG_SYS_DSPI_CTAR0;
61 #endif
62 #ifdef CONFIG_SYS_DSPI_CTAR1
63 	dspi->ctar[1] = CONFIG_SYS_DSPI_CTAR1;
64 #endif
65 #ifdef CONFIG_SYS_DSPI_CTAR2
66 	dspi->ctar[2] = CONFIG_SYS_DSPI_CTAR2;
67 #endif
68 #ifdef CONFIG_SYS_DSPI_CTAR3
69 	dspi->ctar[3] = CONFIG_SYS_DSPI_CTAR3;
70 #endif
71 #ifdef CONFIG_SYS_DSPI_CTAR4
72 	dspi->ctar[4] = CONFIG_SYS_DSPI_CTAR4;
73 #endif
74 #ifdef CONFIG_SYS_DSPI_CTAR5
75 	dspi->ctar[5] = CONFIG_SYS_DSPI_CTAR5;
76 #endif
77 #ifdef CONFIG_SYS_DSPI_CTAR6
78 	dspi->ctar[6] = CONFIG_SYS_DSPI_CTAR6;
79 #endif
80 #ifdef CONFIG_SYS_DSPI_CTAR7
81 	dspi->ctar[7] = CONFIG_SYS_DSPI_CTAR7;
82 #endif
83 }
84 
85 static void cfspi_tx(u32 ctrl, u16 data)
86 {
87 	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
88 
89 	while ((dspi->sr & 0x0000F000) >= 4) ;
90 
91 	dspi->tfr = (ctrl | data);
92 }
93 
94 static u16 cfspi_rx(void)
95 {
96 	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
97 
98 	while ((dspi->sr & 0x000000F0) == 0) ;
99 
100 	return (dspi->rfr & 0xFFFF);
101 }
102 
103 static int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout,
104 		      void *din, ulong flags)
105 {
106 	struct cf_spi_slave *cfslave = to_cf_spi_slave(slave);
107 	u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
108 	u8 *spi_rd = NULL, *spi_wr = NULL;
109 	static u32 ctrl = 0;
110 	uint len = bitlen >> 3;
111 
112 	if (cfslave->charbit == 16) {
113 		bitlen >>= 1;
114 		spi_wr16 = (u16 *) dout;
115 		spi_rd16 = (u16 *) din;
116 	} else {
117 		spi_wr = (u8 *) dout;
118 		spi_rd = (u8 *) din;
119 	}
120 
121 	if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
122 		ctrl |= DSPI_TFR_CONT;
123 
124 	ctrl = (ctrl & 0xFF000000) | ((1 << slave->cs) << 16);
125 
126 	if (len > 1) {
127 		int tmp_len = len - 1;
128 		while (tmp_len--) {
129 			if (dout != NULL) {
130 				if (cfslave->charbit == 16)
131 					cfspi_tx(ctrl, *spi_wr16++);
132 				else
133 					cfspi_tx(ctrl, *spi_wr++);
134 				cfspi_rx();
135 			}
136 
137 			if (din != NULL) {
138 				cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
139 				if (cfslave->charbit == 16)
140 					*spi_rd16++ = cfspi_rx();
141 				else
142 					*spi_rd++ = cfspi_rx();
143 			}
144 		}
145 
146 		len = 1;	/* remaining byte */
147 	}
148 
149 	if ((flags & SPI_XFER_END) == SPI_XFER_END)
150 		ctrl &= ~DSPI_TFR_CONT;
151 
152 	if (len) {
153 		if (dout != NULL) {
154 			if (cfslave->charbit == 16)
155 				cfspi_tx(ctrl, *spi_wr16);
156 			else
157 				cfspi_tx(ctrl, *spi_wr);
158 			cfspi_rx();
159 		}
160 
161 		if (din != NULL) {
162 			cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
163 			if (cfslave->charbit == 16)
164 				*spi_rd16 = cfspi_rx();
165 			else
166 				*spi_rd = cfspi_rx();
167 		}
168 	} else {
169 		/* dummy read */
170 		cfspi_tx(ctrl, CONFIG_SPI_IDLE_VAL);
171 		cfspi_rx();
172 	}
173 
174 	return 0;
175 }
176 
177 static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave,
178 					   uint mode)
179 {
180 	/*
181 	 * bit definition for mode:
182 	 * bit 31 - 28: Transfer size 3 to 16 bits
183 	 *     27 - 26: PCS to SCK delay prescaler
184 	 *     25 - 24: After SCK delay prescaler
185 	 *     23 - 22: Delay after transfer prescaler
186 	 *     21     : Allow overwrite for bit 31-22 and bit 20-8
187 	 *     20     : Double baud rate
188 	 *     19 - 16: PCS to SCK delay scaler
189 	 *     15 - 12: After SCK delay scaler
190 	 *     11 -  8: Delay after transfer scaler
191 	 *      7 -  0: SPI_CPHA, SPI_CPOL, SPI_LSB_FIRST
192 	 */
193 	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
194 	int prescaler[] = { 2, 3, 5, 7 };
195 	int scaler[] = {
196 		2, 4, 6, 8,
197 		16, 32, 64, 128,
198 		256, 512, 1024, 2048,
199 		4096, 8192, 16384, 32768
200 	};
201 	int i, j, pbrcnt, brcnt, diff, tmp, dbr = 0;
202 	int best_i, best_j, bestmatch = 0x7FFFFFFF, baud_speed;
203 	u32 bus_setup = 0;
204 
205 	tmp = (prescaler[3] * scaler[15]);
206 	/* Maximum and minimum baudrate it can handle */
207 	if ((cfslave->baudrate > (gd->bus_clk >> 1)) ||
208 	    (cfslave->baudrate < (gd->bus_clk / tmp))) {
209 		printf("Exceed baudrate limitation: Max %d - Min %d\n",
210 		       (int)(gd->bus_clk >> 1), (int)(gd->bus_clk / tmp));
211 		return NULL;
212 	}
213 
214 	/* Activate Double Baud when it exceed 1/4 the bus clk */
215 	if ((CONFIG_SYS_DSPI_CTAR0 & DSPI_CTAR_DBR) ||
216 	    (cfslave->baudrate > (gd->bus_clk / (prescaler[0] * scaler[0])))) {
217 		bus_setup |= DSPI_CTAR_DBR;
218 		dbr = 1;
219 	}
220 
221 	if (mode & SPI_CPOL)
222 		bus_setup |= DSPI_CTAR_CPOL;
223 	if (mode & SPI_CPHA)
224 		bus_setup |= DSPI_CTAR_CPHA;
225 	if (mode & SPI_LSB_FIRST)
226 		bus_setup |= DSPI_CTAR_LSBFE;
227 
228 	/* Overwrite default value set in platform configuration file */
229 	if (mode & SPI_MODE_MOD) {
230 
231 		if ((mode & 0xF0000000) == 0)
232 			bus_setup |=
233 			    dspi->ctar[cfslave->slave.bus] & 0x78000000;
234 		else
235 			bus_setup |= ((mode & 0xF0000000) >> 1);
236 
237 		/*
238 		 * Check to see if it is enabled by default in platform
239 		 * config, or manual setting passed by mode parameter
240 		 */
241 		if (mode & SPI_DBLRATE) {
242 			bus_setup |= DSPI_CTAR_DBR;
243 			dbr = 1;
244 		}
245 		bus_setup |= (mode & 0x0FC00000) >> 4;	/* PSCSCK, PASC, PDT */
246 		bus_setup |= (mode & 0x000FFF00) >> 4;	/* CSSCK, ASC, DT */
247 	} else
248 		bus_setup |= (dspi->ctar[cfslave->slave.bus] & 0x78FCFFF0);
249 
250 	cfslave->charbit =
251 	    ((dspi->ctar[cfslave->slave.bus] & 0x78000000) ==
252 	     0x78000000) ? 16 : 8;
253 
254 	pbrcnt = sizeof(prescaler) / sizeof(int);
255 	brcnt = sizeof(scaler) / sizeof(int);
256 
257 	/* baudrate calculation - to closer value, may not be exact match */
258 	for (best_i = 0, best_j = 0, i = 0; i < pbrcnt; i++) {
259 		baud_speed = gd->bus_clk / prescaler[i];
260 		for (j = 0; j < brcnt; j++) {
261 			tmp = (baud_speed / scaler[j]) * (1 + dbr);
262 
263 			if (tmp > cfslave->baudrate)
264 				diff = tmp - cfslave->baudrate;
265 			else
266 				diff = cfslave->baudrate - tmp;
267 
268 			if (diff < bestmatch) {
269 				bestmatch = diff;
270 				best_i = i;
271 				best_j = j;
272 			}
273 		}
274 	}
275 	bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
276 	dspi->ctar[cfslave->slave.bus] = bus_setup;
277 
278 	return &cfslave->slave;
279 }
280 #endif				/* CONFIG_CF_DSPI */
281 
282 #ifdef CONFIG_CF_QSPI
283 /* 52xx, 53xx */
284 #endif				/* CONFIG_CF_QSPI */
285 
286 #ifdef CONFIG_CMD_SPI
287 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
288 {
289 	if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8)))
290 		return 1;
291 	else
292 		return 0;
293 }
294 
295 void spi_init_f(void)
296 {
297 }
298 
299 void spi_init_r(void)
300 {
301 }
302 
303 void spi_init(void)
304 {
305 	cfspi_init();
306 }
307 
308 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
309 				  unsigned int max_hz, unsigned int mode)
310 {
311 	struct cf_spi_slave *cfslave;
312 
313 	if (!spi_cs_is_valid(bus, cs))
314 		return NULL;
315 
316 	cfslave = spi_alloc_slave(struct cf_spi_slave, bus, cs);
317 	if (!cfslave)
318 		return NULL;
319 
320 	cfslave->baudrate = max_hz;
321 
322 	/* specific setup */
323 	return cfspi_setup_slave(cfslave, mode);
324 }
325 
326 void spi_free_slave(struct spi_slave *slave)
327 {
328 	struct cf_spi_slave *cfslave = to_cf_spi_slave(slave);
329 
330 	free(cfslave);
331 }
332 
333 int spi_claim_bus(struct spi_slave *slave)
334 {
335 	return cfspi_claim_bus(slave->bus, slave->cs);
336 }
337 
338 void spi_release_bus(struct spi_slave *slave)
339 {
340 	cfspi_release_bus(slave->bus, slave->cs);
341 }
342 
343 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
344 	     void *din, unsigned long flags)
345 {
346 	return cfspi_xfer(slave, bitlen, dout, din, flags);
347 }
348 #endif				/* CONFIG_CMD_SPI */
349