xref: /openbmc/u-boot/drivers/spi/atmel_spi.c (revision 33b1d3f4)
1 /*
2  * Copyright (C) 2007 Atmel Corporation
3  *
4  * See file CREDITS for list of people who contributed to this
5  * project.
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License as
9  * published by the Free Software Foundation; either version 2 of
10  * the License, or (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20  * MA 02111-1307 USA
21  */
22 #include <common.h>
23 #include <spi.h>
24 #include <malloc.h>
25 
26 #include <asm/io.h>
27 
28 #include <asm/arch/clk.h>
29 #include <asm/arch/memory-map.h>
30 
31 #include "atmel_spi.h"
32 
33 void spi_init()
34 {
35 
36 }
37 
38 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
39 			unsigned int max_hz, unsigned int mode)
40 {
41 	struct atmel_spi_slave	*as;
42 	unsigned int		scbr;
43 	u32			csrx;
44 	void			*regs;
45 
46 	if (cs > 3 || !spi_cs_is_valid(bus, cs))
47 		return NULL;
48 
49 	switch (bus) {
50 	case 0:
51 		regs = (void *)SPI0_BASE;
52 		break;
53 #ifdef SPI1_BASE
54 	case 1:
55 		regs = (void *)SPI1_BASE;
56 		break;
57 #endif
58 #ifdef SPI2_BASE
59 	case 2:
60 		regs = (void *)SPI2_BASE;
61 		break;
62 #endif
63 #ifdef SPI3_BASE
64 	case 3:
65 		regs = (void *)SPI3_BASE;
66 		break;
67 #endif
68 	default:
69 		return NULL;
70 	}
71 
72 
73 	scbr = (get_spi_clk_rate(bus) + max_hz - 1) / max_hz;
74 	if (scbr > ATMEL_SPI_CSRx_SCBR_MAX)
75 		/* Too low max SCK rate */
76 		return NULL;
77 	if (scbr < 1)
78 		scbr = 1;
79 
80 	csrx = ATMEL_SPI_CSRx_SCBR(scbr);
81 	csrx |= ATMEL_SPI_CSRx_BITS(ATMEL_SPI_BITS_8);
82 	if (!(mode & SPI_CPHA))
83 		csrx |= ATMEL_SPI_CSRx_NCPHA;
84 	if (mode & SPI_CPOL)
85 		csrx |= ATMEL_SPI_CSRx_CPOL;
86 
87 	as = malloc(sizeof(struct atmel_spi_slave));
88 	if (!as)
89 		return NULL;
90 
91 	as->slave.bus = bus;
92 	as->slave.cs = cs;
93 	as->regs = regs;
94 	as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS
95 			| ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf);
96 	spi_writel(as, CSR(cs), csrx);
97 
98 	return &as->slave;
99 }
100 
101 void spi_free_slave(struct spi_slave *slave)
102 {
103 	struct atmel_spi_slave *as = to_atmel_spi(slave);
104 
105 	free(as);
106 }
107 
108 int spi_claim_bus(struct spi_slave *slave)
109 {
110 	struct atmel_spi_slave *as = to_atmel_spi(slave);
111 
112 	/* Enable the SPI hardware */
113 	spi_writel(as, CR, ATMEL_SPI_CR_SPIEN);
114 
115 	/*
116 	 * Select the slave. This should set SCK to the correct
117 	 * initial state, etc.
118 	 */
119 	spi_writel(as, MR, as->mr);
120 
121 	return 0;
122 }
123 
124 void spi_release_bus(struct spi_slave *slave)
125 {
126 	struct atmel_spi_slave *as = to_atmel_spi(slave);
127 
128 	/* Disable the SPI hardware */
129 	spi_writel(as, CR, ATMEL_SPI_CR_SPIDIS);
130 }
131 
132 int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
133 		const void *dout, void *din, unsigned long flags)
134 {
135 	struct atmel_spi_slave *as = to_atmel_spi(slave);
136 	unsigned int	len_tx;
137 	unsigned int	len_rx;
138 	unsigned int	len;
139 	int		ret;
140 	u32		status;
141 	const u8	*txp = dout;
142 	u8		*rxp = din;
143 	u8		value;
144 
145 	ret = 0;
146 	if (bitlen == 0)
147 		/* Finish any previously submitted transfers */
148 		goto out;
149 
150 	/*
151 	 * TODO: The controller can do non-multiple-of-8 bit
152 	 * transfers, but this driver currently doesn't support it.
153 	 *
154 	 * It's also not clear how such transfers are supposed to be
155 	 * represented as a stream of bytes...this is a limitation of
156 	 * the current SPI interface.
157 	 */
158 	if (bitlen % 8) {
159 		/* Errors always terminate an ongoing transfer */
160 		flags |= SPI_XFER_END;
161 		goto out;
162 	}
163 
164 	len = bitlen / 8;
165 
166 	/*
167 	 * The controller can do automatic CS control, but it is
168 	 * somewhat quirky, and it doesn't really buy us much anyway
169 	 * in the context of U-Boot.
170 	 */
171 	if (flags & SPI_XFER_BEGIN)
172 		spi_cs_activate(slave);
173 
174 	for (len_tx = 0, len_rx = 0; len_rx < len; ) {
175 		status = spi_readl(as, SR);
176 
177 		if (status & ATMEL_SPI_SR_OVRES)
178 			return -1;
179 
180 		if (len_tx < len && (status & ATMEL_SPI_SR_TDRE)) {
181 			if (txp)
182 				value = *txp++;
183 			else
184 				value = 0;
185 			spi_writel(as, TDR, value);
186 			len_tx++;
187 		}
188 		if (status & ATMEL_SPI_SR_RDRF) {
189 			value = spi_readl(as, RDR);
190 			if (rxp)
191 				*rxp++ = value;
192 			len_rx++;
193 		}
194 	}
195 
196 out:
197 	if (flags & SPI_XFER_END) {
198 		/*
199 		 * Wait until the transfer is completely done before
200 		 * we deactivate CS.
201 		 */
202 		do {
203 			status = spi_readl(as, SR);
204 		} while (!(status & ATMEL_SPI_SR_TXEMPTY));
205 
206 		spi_cs_deactivate(slave);
207 	}
208 
209 	return 0;
210 }
211