xref: /openbmc/u-boot/drivers/sound/sound.c (revision e874d5b0)
1 /*
2  * Copyright (C) 2012 Samsung Electronics
3  * R. Chandrasekar <rcsekar@samsung.com>
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 #include <malloc.h>
25 #include <common.h>
26 #include <asm/io.h>
27 #include <libfdt.h>
28 #include <fdtdec.h>
29 #include <i2c.h>
30 #include <i2s.h>
31 #include <sound.h>
32 #include <asm/arch/sound.h>
33 #include "wm8994.h"
34 
35 /* defines */
36 #define SOUND_400_HZ 400
37 #define SOUND_BITS_IN_BYTE 8
38 
39 static struct i2stx_info g_i2stx_pri;
40 
41 /*
42  * get_sound_i2s_values gets values for i2s parameters
43  *
44  * @param i2stx_info	i2s transmitter transfer param structure
45  * @param blob		FDT blob if enabled else NULL
46  */
47 static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
48 {
49 #ifdef CONFIG_OF_CONTROL
50 	int node;
51 	int error = 0;
52 	int base;
53 
54 	node = fdtdec_next_compatible(blob, 0,
55 					COMPAT_SAMSUNG_EXYNOS5_SOUND);
56 	if (node <= 0) {
57 		debug("EXYNOS_SOUND: No node for sound in device tree\n");
58 		return -1;
59 	}
60 
61 	/*
62 	 * Get the pre-defined sound specific values from FDT.
63 	 * All of these are expected to be correct otherwise
64 	 * wrong register values in i2s setup parameters
65 	 * may result in no sound play.
66 	 */
67 	base = fdtdec_get_addr(blob, node, "reg");
68 	if (base == FDT_ADDR_T_NONE) {
69 		debug("%s: Missing  i2s base\n", __func__);
70 		return -1;
71 	}
72 	i2s->base_address = base;
73 
74 	i2s->audio_pll_clk = fdtdec_get_int(blob,
75 				node, "samsung,i2s-epll-clock-frequency", -1);
76 	error |= i2s->audio_pll_clk;
77 	debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
78 	i2s->samplingrate = fdtdec_get_int(blob,
79 				node, "samsung,i2s-sampling-rate", -1);
80 	error |= i2s->samplingrate;
81 	debug("samplingrate = %d\n", i2s->samplingrate);
82 	i2s->bitspersample = fdtdec_get_int(blob,
83 				node, "samsung,i2s-bits-per-sample", -1);
84 	error |= i2s->bitspersample;
85 	debug("bitspersample = %d\n", i2s->bitspersample);
86 	i2s->channels = fdtdec_get_int(blob,
87 			node, "samsung,i2s-channels", -1);
88 	error |= i2s->channels;
89 	debug("channels = %d\n", i2s->channels);
90 	i2s->rfs = fdtdec_get_int(blob,
91 				node, "samsung,i2s-lr-clk-framesize", -1);
92 	error |= i2s->rfs;
93 	debug("rfs = %d\n", i2s->rfs);
94 	i2s->bfs = fdtdec_get_int(blob,
95 				node, "samsung,i2s-bit-clk-framesize", -1);
96 	error |= i2s->bfs;
97 	debug("bfs = %d\n", i2s->bfs);
98 	if (error == -1) {
99 		debug("fail to get sound i2s node properties\n");
100 		return -1;
101 	}
102 #else
103 	i2s->base_address = samsung_get_base_i2s();
104 	i2s->audio_pll_clk = I2S_PLL_CLK;
105 	i2s->samplingrate = I2S_SAMPLING_RATE;
106 	i2s->bitspersample = I2S_BITS_PER_SAMPLE;
107 	i2s->channels = I2S_CHANNELS;
108 	i2s->rfs = I2S_RFS;
109 	i2s->bfs = I2S_BFS;
110 #endif
111 	return 0;
112 }
113 
114 /*
115  * Init codec
116  *
117  * @param blob          FDT blob
118  * @param pi2s_tx	i2s parameters required by codec
119  * @return              int value, 0 for success
120  */
121 static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
122 {
123 	int ret;
124 	const char *codectype;
125 #ifdef CONFIG_OF_CONTROL
126 	int node;
127 
128 	/* Get the node from FDT for sound */
129 	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SOUND);
130 	if (node <= 0) {
131 		debug("EXYNOS_SOUND: No node for sound in device tree\n");
132 		debug("node = %d\n", node);
133 		return -1;
134 	}
135 
136 	/*
137 	 * Get the pre-defined sound codec specific values from FDT.
138 	 * All of these are expected to be correct otherwise sound
139 	 * can not be played
140 	 */
141 	codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
142 	debug("device = %s\n", codectype);
143 #else
144 	codectype =  AUDIO_CODEC;
145 #endif
146 	if (!strcmp(codectype, "wm8994")) {
147 		/* Check the codec type and initialise the same */
148 		ret = wm8994_init(blob, WM8994_AIF2,
149 			pi2s_tx->samplingrate,
150 			(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
151 			pi2s_tx->bitspersample, pi2s_tx->channels);
152 	} else {
153 		debug("%s: Unknown code type %s\n", __func__,
154 		      codectype);
155 		return -1;
156 	}
157 	if (ret) {
158 		debug("%s: Codec init failed\n", __func__);
159 		return -1;
160 	}
161 
162 	return 0;
163 }
164 
165 int sound_init(const void *blob)
166 {
167 	int ret;
168 	struct i2stx_info *pi2s_tx = &g_i2stx_pri;
169 
170 	/* Get the I2S Values */
171 	if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
172 		debug(" FDT I2S values failed\n");
173 		return -1;
174 	}
175 
176 	if (codec_init(blob, pi2s_tx) < 0) {
177 		debug(" Codec init failed\n");
178 		return -1;
179 	}
180 
181 	ret = i2s_tx_init(pi2s_tx);
182 	if (ret) {
183 		debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
184 		      ret);
185 		return ret;
186 	}
187 
188 
189 	return ret;
190 }
191 
192 /*
193  * Generates square wave sound data for 1 second
194  *
195  * @param data          data buffer pointer
196  * @param size          size of the buffer
197  * @param freq          frequency of the wave
198  */
199 static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
200 {
201 	const int sample = 48000;
202 	const unsigned short amplitude = 16000; /* between 1 and 32767 */
203 	const int period = freq ? sample / freq : 0;
204 	const int half = period / 2;
205 
206 	assert(freq);
207 
208 	/* Make sure we don't overflow our buffer */
209 	if (size % 2)
210 		size--;
211 
212 	while (size) {
213 		int i;
214 		for (i = 0; size && i < half; i++) {
215 			size -= 2;
216 			*data++ = amplitude;
217 			*data++ = amplitude;
218 		}
219 		for (i = 0; size && i < period - half; i++) {
220 			size -= 2;
221 			*data++ = -amplitude;
222 			*data++ = -amplitude;
223 		}
224 	}
225 }
226 
227 int sound_play(uint32_t msec, uint32_t frequency)
228 {
229 	unsigned int *data;
230 	unsigned long data_size;
231 	unsigned int ret = 0;
232 
233 	/*Buffer length computation */
234 	data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
235 	data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
236 	data = malloc(data_size);
237 
238 	if (data == NULL) {
239 		debug("%s: malloc failed\n", __func__);
240 		return -1;
241 	}
242 
243 	sound_prepare_buffer((unsigned short *)data,
244 				data_size / sizeof(unsigned short), frequency);
245 
246 	while (msec >= 1000) {
247 		ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
248 					   (data_size / sizeof(int)));
249 		msec -= 1000;
250 	}
251 	if (msec) {
252 		unsigned long size =
253 			(data_size * msec) / (sizeof(int) * 1000);
254 
255 		ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
256 	}
257 
258 	free(data);
259 
260 	return ret;
261 }
262