xref: /openbmc/u-boot/drivers/sound/sound.c (revision 9d86f0c3)
1 /*
2  * Copyright (C) 2012 Samsung Electronics
3  * R. Chandrasekar <rcsekar@samsung.com>
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23 
24 #include <malloc.h>
25 #include <common.h>
26 #include <asm/io.h>
27 #include <i2c.h>
28 #include <i2s.h>
29 #include <sound.h>
30 #include "wm8994.h"
31 #include <asm/arch/sound.h>
32 
33 /* defines */
34 #define SOUND_400_HZ 400
35 #define SOUND_BITS_IN_BYTE 8
36 
37 static struct i2stx_info g_i2stx_pri;
38 static struct sound_codec_info g_codec_info;
39 
40 /*
41  * get_sound_fdt_values gets fdt values for i2s parameters
42  *
43  * @param i2stx_info	i2s transmitter transfer param structure
44  * @param blob		FDT blob
45  */
46 static void get_sound_i2s_values(struct i2stx_info *i2s)
47 {
48 	i2s->base_address = samsung_get_base_i2s();
49 	i2s->audio_pll_clk = I2S_PLL_CLK;
50 	i2s->samplingrate = I2S_SAMPLING_RATE;
51 	i2s->bitspersample = I2S_BITS_PER_SAMPLE;
52 	i2s->channels = I2S_CHANNELS;
53 	i2s->rfs = I2S_RFS;
54 	i2s->bfs = I2S_BFS;
55 }
56 
57 /*
58  * Gets fdt values for wm8994 config parameters
59  *
60  * @param pcodec_info	codec information structure
61  * @param blob		FDT blob
62  * @return		int value, 0 for success
63  */
64 static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
65 {
66 	int error = 0;
67 
68 	switch (AUDIO_COMPAT) {
69 	case AUDIO_COMPAT_SPI:
70 		debug("%s: Support not added for SPI interface\n", __func__);
71 		return -1;
72 		break;
73 	case AUDIO_COMPAT_I2C:
74 		pcodec_info->i2c_bus = AUDIO_I2C_BUS;
75 		pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
76 		debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
77 		break;
78 	default:
79 		debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT);
80 		return -1;
81 	}
82 
83 	if (error == -1) {
84 		debug("fail to get wm8994 codec node properties\n");
85 		return -1;
86 	}
87 
88 	return 0;
89 }
90 
91 /*
92  * Gets fdt values for codec config parameters
93  *
94  * @param pcodec_info	codec information structure
95  * @param blob		FDT blob
96  * @return		int value, 0 for success
97  */
98 static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
99 {
100 	int error = 0;
101 	const char *codectype;
102 
103 	codectype =  AUDIO_CODEC;
104 
105 	if (!strcmp(codectype, "wm8994")) {
106 		pcodec_info->codec_type = CODEC_WM_8994;
107 		error = get_sound_wm8994_values(pcodec_info);
108 	} else {
109 		error = -1;
110 	}
111 
112 	if (error == -1) {
113 		debug("fail to get sound codec node properties\n");
114 		return -1;
115 	}
116 
117 	return 0;
118 }
119 
120 int sound_init(void)
121 {
122 	int ret;
123 	struct i2stx_info *pi2s_tx = &g_i2stx_pri;
124 	struct sound_codec_info *pcodec_info = &g_codec_info;
125 
126 	/* Get the I2S Values */
127 	get_sound_i2s_values(pi2s_tx);
128 
129 	/* Get the codec Values */
130 	if (get_sound_codec_values(pcodec_info) < 0)
131 		return -1;
132 
133 	ret = i2s_tx_init(pi2s_tx);
134 	if (ret) {
135 		debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
136 		      ret);
137 		return ret;
138 	}
139 
140 	/* Check the codec type and initialise the same */
141 	if (pcodec_info->codec_type == CODEC_WM_8994) {
142 		ret = wm8994_init(pcodec_info, WM8994_AIF2,
143 			pi2s_tx->samplingrate,
144 			(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
145 			pi2s_tx->bitspersample, pi2s_tx->channels);
146 	} else {
147 		debug("%s: Unknown code type %d\n", __func__,
148 		      pcodec_info->codec_type);
149 		return -1;
150 	}
151 	if (ret) {
152 		debug("%s: Codec init failed\n", __func__);
153 		return -1;
154 	}
155 
156 	return ret;
157 }
158 
159 /*
160  * Generates square wave sound data for 1 second
161  *
162  * @param data          data buffer pointer
163  * @param size          size of the buffer
164  * @param freq          frequency of the wave
165  */
166 static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
167 {
168 	const int sample = 48000;
169 	const unsigned short amplitude = 16000; /* between 1 and 32767 */
170 	const int period = freq ? sample / freq : 0;
171 	const int half = period / 2;
172 
173 	assert(freq);
174 
175 	/* Make sure we don't overflow our buffer */
176 	if (size % 2)
177 		size--;
178 
179 	while (size) {
180 		int i;
181 		for (i = 0; size && i < half; i++) {
182 			size -= 2;
183 			*data++ = amplitude;
184 			*data++ = amplitude;
185 		}
186 		for (i = 0; size && i < period - half; i++) {
187 			size -= 2;
188 			*data++ = -amplitude;
189 			*data++ = -amplitude;
190 		}
191 	}
192 }
193 
194 int sound_play(uint32_t msec, uint32_t frequency)
195 {
196 	unsigned int *data;
197 	unsigned long data_size;
198 	unsigned int ret = 0;
199 
200 	/*Buffer length computation */
201 	data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
202 	data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
203 	data = malloc(data_size);
204 
205 	if (data == NULL) {
206 		debug("%s: malloc failed\n", __func__);
207 		return -1;
208 	}
209 
210 	sound_prepare_buffer((unsigned short *)data,
211 				data_size / sizeof(unsigned short), frequency);
212 
213 	while (msec >= 1000) {
214 		ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
215 					   (data_size / sizeof(int)));
216 		msec -= 1000;
217 	}
218 	if (msec) {
219 		unsigned long size =
220 			(data_size * msec) / (sizeof(int) * 1000);
221 
222 		ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
223 	}
224 
225 	free(data);
226 
227 	return ret;
228 }
229