xref: /openbmc/u-boot/drivers/sound/max98095.c (revision e11ef3d2)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * max98095.c -- MAX98095 ALSA SoC Audio driver
4  *
5  * Copyright 2011 Maxim Integrated Products
6  *
7  * Modified for U-Boot by R. Chandrasekar (rcsekar@samsung.com)
8  */
9 
10 #include <common.h>
11 #include <audio_codec.h>
12 #include <dm.h>
13 #include <div64.h>
14 #include <fdtdec.h>
15 #include <i2c.h>
16 #include <sound.h>
17 #include <asm/gpio.h>
18 #include <asm/io.h>
19 #include <asm/arch/clk.h>
20 #include <asm/arch/cpu.h>
21 #include <asm/arch/power.h>
22 #include "i2s.h"
23 #include "max98095.h"
24 
25 /* Index 0 is reserved. */
26 int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
27 		88200, 96000};
28 
29 /*
30  * codec mclk clock divider coefficients based on sampling rate
31  *
32  * @param rate sampling rate
33  * @param value address of indexvalue to be stored
34  *
35  * @return	0 for success or negative error code.
36  */
37 static int rate_value(int rate, u8 *value)
38 {
39 	int i;
40 
41 	for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
42 		if (rate_table[i] >= rate) {
43 			*value = i;
44 			return 0;
45 		}
46 	}
47 	*value = 1;
48 
49 	return -EINVAL;
50 }
51 
52 /*
53  * Sets hw params for max98095
54  *
55  * @param priv		max98095 information pointer
56  * @param rate		Sampling rate
57  * @param bits_per_sample	Bits per sample
58  *
59  * @return	0 for success or negative error code.
60  */
61 static int max98095_hw_params(struct maxim_priv *priv,
62 			      enum en_max_audio_interface aif_id,
63 			      unsigned int rate, unsigned int bits_per_sample)
64 {
65 	u8 regval;
66 	int error;
67 	unsigned short M98095_DAI_CLKMODE;
68 	unsigned short M98095_DAI_FORMAT;
69 	unsigned short M98095_DAI_FILTERS;
70 
71 	if (aif_id == AIF1) {
72 		M98095_DAI_CLKMODE = M98095_027_DAI1_CLKMODE;
73 		M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT;
74 		M98095_DAI_FILTERS = M98095_02E_DAI1_FILTERS;
75 	} else {
76 		M98095_DAI_CLKMODE = M98095_031_DAI2_CLKMODE;
77 		M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT;
78 		M98095_DAI_FILTERS = M98095_038_DAI2_FILTERS;
79 	}
80 
81 	switch (bits_per_sample) {
82 	case 16:
83 		error = maxim_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS, 0);
84 		break;
85 	case 24:
86 		error = maxim_bic_or(priv, M98095_DAI_FORMAT, M98095_DAI_WS,
87 				     M98095_DAI_WS);
88 		break;
89 	default:
90 		debug("%s: Illegal bits per sample %d.\n",
91 		      __func__, bits_per_sample);
92 		return -EINVAL;
93 	}
94 
95 	if (rate_value(rate, &regval)) {
96 		debug("%s: Failed to set sample rate to %d.\n",
97 		      __func__, rate);
98 		return -EINVAL;
99 	}
100 	priv->rate = rate;
101 
102 	error |= maxim_bic_or(priv, M98095_DAI_CLKMODE, M98095_CLKMODE_MASK,
103 				 regval);
104 
105 	/* Update sample rate mode */
106 	if (rate < 50000)
107 		error |= maxim_bic_or(priv, M98095_DAI_FILTERS,
108 					 M98095_DAI_DHF, 0);
109 	else
110 		error |= maxim_bic_or(priv, M98095_DAI_FILTERS,
111 					 M98095_DAI_DHF, M98095_DAI_DHF);
112 
113 	if (error < 0) {
114 		debug("%s: Error setting hardware params.\n", __func__);
115 		return -EIO;
116 	}
117 
118 	return 0;
119 }
120 
121 /*
122  * Configures Audio interface system clock for the given frequency
123  *
124  * @param priv		max98095 information
125  * @param freq		Sampling frequency in Hz
126  *
127  * @return	0 for success or negative error code.
128  */
129 static int max98095_set_sysclk(struct maxim_priv *priv, unsigned int freq)
130 {
131 	int error = 0;
132 
133 	/* Requested clock frequency is already setup */
134 	if (freq == priv->sysclk)
135 		return 0;
136 
137 	/* Setup clocks for slave mode, and using the PLL
138 	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
139 	 *	0x02 (when master clk is 20MHz to 40MHz)..
140 	 *	0x03 (when master clk is 40MHz to 60MHz)..
141 	 */
142 	if ((freq >= 10000000) && (freq < 20000000)) {
143 		error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x10);
144 	} else if ((freq >= 20000000) && (freq < 40000000)) {
145 		error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x20);
146 	} else if ((freq >= 40000000) && (freq < 60000000)) {
147 		error = maxim_i2c_write(priv, M98095_026_SYS_CLK, 0x30);
148 	} else {
149 		debug("%s: Invalid master clock frequency\n", __func__);
150 		return -EINVAL;
151 	}
152 
153 	debug("%s: Clock at %uHz\n", __func__, freq);
154 
155 	if (error < 0)
156 		return -EIO;
157 
158 	priv->sysclk = freq;
159 	return 0;
160 }
161 
162 /*
163  * Sets Max98095 I2S format
164  *
165  * @param priv		max98095 information
166  * @param fmt		i2S format - supports a subset of the options defined
167  *			in i2s.h.
168  *
169  * @return	0 for success or negative error code.
170  */
171 static int max98095_set_fmt(struct maxim_priv *priv, int fmt,
172 			    enum en_max_audio_interface aif_id)
173 {
174 	u8 regval = 0;
175 	int error = 0;
176 	unsigned short M98095_DAI_CLKCFG_HI;
177 	unsigned short M98095_DAI_CLKCFG_LO;
178 	unsigned short M98095_DAI_FORMAT;
179 	unsigned short M98095_DAI_CLOCK;
180 
181 	if (fmt == priv->fmt)
182 		return 0;
183 
184 	priv->fmt = fmt;
185 
186 	if (aif_id == AIF1) {
187 		M98095_DAI_CLKCFG_HI = M98095_028_DAI1_CLKCFG_HI;
188 		M98095_DAI_CLKCFG_LO = M98095_029_DAI1_CLKCFG_LO;
189 		M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT;
190 		M98095_DAI_CLOCK = M98095_02B_DAI1_CLOCK;
191 	} else {
192 		M98095_DAI_CLKCFG_HI = M98095_032_DAI2_CLKCFG_HI;
193 		M98095_DAI_CLKCFG_LO = M98095_033_DAI2_CLKCFG_LO;
194 		M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT;
195 		M98095_DAI_CLOCK = M98095_035_DAI2_CLOCK;
196 	}
197 
198 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
199 	case SND_SOC_DAIFMT_CBS_CFS:
200 		/* Slave mode PLL */
201 		error |= maxim_i2c_write(priv, M98095_DAI_CLKCFG_HI, 0x80);
202 		error |= maxim_i2c_write(priv, M98095_DAI_CLKCFG_LO, 0x00);
203 		break;
204 	case SND_SOC_DAIFMT_CBM_CFM:
205 		/* Set to master mode */
206 		regval |= M98095_DAI_MAS;
207 		break;
208 	case SND_SOC_DAIFMT_CBS_CFM:
209 	case SND_SOC_DAIFMT_CBM_CFS:
210 	default:
211 		debug("%s: Clock mode unsupported\n", __func__);
212 		return -EINVAL;
213 	}
214 
215 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
216 	case SND_SOC_DAIFMT_I2S:
217 		regval |= M98095_DAI_DLY;
218 		break;
219 	case SND_SOC_DAIFMT_LEFT_J:
220 		break;
221 	default:
222 		debug("%s: Unrecognized format.\n", __func__);
223 		return -EINVAL;
224 	}
225 
226 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
227 	case SND_SOC_DAIFMT_NB_NF:
228 		break;
229 	case SND_SOC_DAIFMT_NB_IF:
230 		regval |= M98095_DAI_WCI;
231 		break;
232 	case SND_SOC_DAIFMT_IB_NF:
233 		regval |= M98095_DAI_BCI;
234 		break;
235 	case SND_SOC_DAIFMT_IB_IF:
236 		regval |= M98095_DAI_BCI | M98095_DAI_WCI;
237 		break;
238 	default:
239 		debug("%s: Unrecognized inversion settings.\n", __func__);
240 		return -EINVAL;
241 	}
242 
243 	error |= maxim_bic_or(priv, M98095_DAI_FORMAT,
244 				 M98095_DAI_MAS | M98095_DAI_DLY |
245 				 M98095_DAI_BCI | M98095_DAI_WCI, regval);
246 
247 	error |= maxim_i2c_write(priv, M98095_DAI_CLOCK, M98095_DAI_BSEL64);
248 
249 	if (error < 0) {
250 		debug("%s: Error setting i2s format.\n", __func__);
251 		return -EIO;
252 	}
253 
254 	return 0;
255 }
256 
257 /*
258  * resets the audio codec
259  *
260  * @param priv	Private data for driver
261  * @return	0 for success or negative error code.
262  */
263 static int max98095_reset(struct maxim_priv *priv)
264 {
265 	int i, ret;
266 
267 	/*
268 	 * Gracefully reset the DSP core and the codec hardware in a proper
269 	 * sequence.
270 	 */
271 	ret = maxim_i2c_write(priv, M98095_00F_HOST_CFG, 0);
272 	if (ret != 0) {
273 		debug("%s: Failed to reset DSP: %d\n", __func__, ret);
274 		return ret;
275 	}
276 
277 	ret = maxim_i2c_write(priv, M98095_097_PWR_SYS, 0);
278 	if (ret != 0) {
279 		debug("%s: Failed to reset codec: %d\n", __func__, ret);
280 		return ret;
281 	}
282 
283 	/*
284 	 * Reset to hardware default for registers, as there is not a soft
285 	 * reset hardware control register.
286 	 */
287 	for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
288 		ret = maxim_i2c_write(priv, i, 0);
289 		if (ret < 0) {
290 			debug("%s: Failed to reset: %d\n", __func__, ret);
291 			return ret;
292 		}
293 	}
294 
295 	return 0;
296 }
297 
298 /*
299  * Intialise max98095 codec device
300  *
301  * @param priv		max98095 information
302  * @return	0 for success or negative error code.
303  */
304 static int max98095_device_init(struct maxim_priv *priv)
305 {
306 	unsigned char id;
307 	int ret;
308 
309 	/* Enable codec clock */
310 	set_xclkout();
311 
312 	/* reset the codec, the DSP core, and disable all interrupts */
313 	ret = max98095_reset(priv);
314 	if (ret != 0) {
315 		debug("Reset\n");
316 		return ret;
317 	}
318 
319 	/* initialize private data */
320 	priv->sysclk = -1U;
321 	priv->rate = -1U;
322 	priv->fmt = -1U;
323 
324 	ret = maxim_i2c_read(priv, M98095_0FF_REV_ID, &id);
325 	if (ret < 0) {
326 		debug("%s: Failure reading hardware revision: %d\n",
327 		      __func__, id);
328 		return ret;
329 	}
330 	debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
331 
332 	return 0;
333 }
334 
335 static int max98095_setup_interface(struct maxim_priv *priv,
336 				    enum en_max_audio_interface aif_id)
337 {
338 	int error;
339 
340 	error = maxim_i2c_write(priv, M98095_097_PWR_SYS, M98095_PWRSV);
341 
342 	/*
343 	 * initialize registers to hardware default configuring audio
344 	 * interface2 to DAC
345 	 */
346 	if (aif_id == AIF1)
347 		error |= maxim_i2c_write(priv, M98095_048_MIX_DAC_LR,
348 					    M98095_DAI1L_TO_DACL |
349 					    M98095_DAI1R_TO_DACR);
350 	else
351 		error |= maxim_i2c_write(priv, M98095_048_MIX_DAC_LR,
352 					    M98095_DAI2M_TO_DACL |
353 					    M98095_DAI2M_TO_DACR);
354 
355 	error |= maxim_i2c_write(priv, M98095_092_PWR_EN_OUT,
356 				    M98095_SPK_SPREADSPECTRUM);
357 	error |= maxim_i2c_write(priv, M98095_04E_CFG_HP, M98095_HPNORMAL);
358 	if (aif_id == AIF1)
359 		error |= maxim_i2c_write(priv, M98095_02C_DAI1_IOCFG,
360 					    M98095_S1NORMAL | M98095_SDATA);
361 	else
362 		error |= maxim_i2c_write(priv, M98095_036_DAI2_IOCFG,
363 					    M98095_S2NORMAL | M98095_SDATA);
364 
365 	/* take the codec out of the shut down */
366 	error |= maxim_bic_or(priv, M98095_097_PWR_SYS, M98095_SHDNRUN,
367 				 M98095_SHDNRUN);
368 	/*
369 	 * route DACL and DACR output to HO and Speakers
370 	 * Ordering: DACL, DACR, DACL, DACR
371 	 */
372 	error |= maxim_i2c_write(priv, M98095_050_MIX_SPK_LEFT, 0x01);
373 	error |= maxim_i2c_write(priv, M98095_051_MIX_SPK_RIGHT, 0x01);
374 	error |= maxim_i2c_write(priv, M98095_04C_MIX_HP_LEFT, 0x01);
375 	error |= maxim_i2c_write(priv, M98095_04D_MIX_HP_RIGHT, 0x01);
376 
377 	/* power Enable */
378 	error |= maxim_i2c_write(priv, M98095_091_PWR_EN_OUT, 0xF3);
379 
380 	/* set Volume */
381 	error |= maxim_i2c_write(priv, M98095_064_LVL_HP_L, 15);
382 	error |= maxim_i2c_write(priv, M98095_065_LVL_HP_R, 15);
383 	error |= maxim_i2c_write(priv, M98095_067_LVL_SPK_L, 16);
384 	error |= maxim_i2c_write(priv, M98095_068_LVL_SPK_R, 16);
385 
386 	/* Enable DAIs */
387 	error |= maxim_i2c_write(priv, M98095_093_BIAS_CTRL, 0x30);
388 	if (aif_id == AIF1)
389 		error |= maxim_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x01);
390 	else
391 		error |= maxim_i2c_write(priv, M98095_096_PWR_DAC_CK, 0x07);
392 
393 	if (error < 0)
394 		return -EIO;
395 
396 	return 0;
397 }
398 
399 static int max98095_do_init(struct maxim_priv *priv,
400 			    enum en_max_audio_interface aif_id,
401 			    int sampling_rate, int mclk_freq,
402 			    int bits_per_sample)
403 {
404 	int ret = 0;
405 
406 	ret = max98095_setup_interface(priv, aif_id);
407 	if (ret < 0) {
408 		debug("%s: max98095 setup interface failed\n", __func__);
409 		return ret;
410 	}
411 
412 	ret = max98095_set_sysclk(priv, mclk_freq);
413 	if (ret < 0) {
414 		debug("%s: max98095 codec set sys clock failed\n", __func__);
415 		return ret;
416 	}
417 
418 	ret = max98095_hw_params(priv, aif_id, sampling_rate,
419 				 bits_per_sample);
420 
421 	if (ret == 0) {
422 		ret = max98095_set_fmt(priv, SND_SOC_DAIFMT_I2S |
423 				       SND_SOC_DAIFMT_NB_NF |
424 				       SND_SOC_DAIFMT_CBS_CFS,
425 				       aif_id);
426 	}
427 
428 	return ret;
429 }
430 
431 static int max98095_set_params(struct udevice *dev, int interface, int rate,
432 			       int mclk_freq, int bits_per_sample,
433 			       uint channels)
434 {
435 	struct maxim_priv *priv = dev_get_priv(dev);
436 
437 	return max98095_do_init(priv, interface, rate, mclk_freq,
438 				bits_per_sample);
439 }
440 
441 static int max98095_probe(struct udevice *dev)
442 {
443 	struct maxim_priv *priv = dev_get_priv(dev);
444 	int ret;
445 
446 	priv->dev = dev;
447 	ret = max98095_device_init(priv);
448 	if (ret < 0) {
449 		debug("%s: max98095 codec chip init failed\n", __func__);
450 		return ret;
451 	}
452 
453 	return 0;
454 }
455 
456 static const struct audio_codec_ops max98095_ops = {
457 	.set_params	= max98095_set_params,
458 };
459 
460 static const struct udevice_id max98095_ids[] = {
461 	{ .compatible = "maxim,max98095" },
462 	{ }
463 };
464 
465 U_BOOT_DRIVER(max98095) = {
466 	.name		= "max98095",
467 	.id		= UCLASS_AUDIO_CODEC,
468 	.of_match	= max98095_ids,
469 	.probe		= max98095_probe,
470 	.ops		= &max98095_ops,
471 	.priv_auto_alloc_size	= sizeof(struct maxim_priv),
472 };
473