1 /* 2 * Copyright (C) 2012 Michal Simek <monstr@monstr.eu> 3 * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 #include <watchdog.h> 26 #include <asm/io.h> 27 #include <linux/compiler.h> 28 #include <serial.h> 29 30 #define ZYNQ_UART_SR_TXFULL 0x00000010 /* TX FIFO full */ 31 #define ZYNQ_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */ 32 33 #define ZYNQ_UART_CR_TX_EN 0x00000010 /* TX enabled */ 34 #define ZYNQ_UART_CR_RX_EN 0x00000004 /* RX enabled */ 35 #define ZYNQ_UART_CR_TXRST 0x00000002 /* TX logic reset */ 36 #define ZYNQ_UART_CR_RXRST 0x00000001 /* RX logic reset */ 37 38 #define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */ 39 40 /* Some clock/baud constants */ 41 #define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */ 42 #define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */ 43 44 struct uart_zynq { 45 u32 control; /* Control Register [8:0] */ 46 u32 mode; /* Mode Register [10:0] */ 47 u32 reserved1[4]; 48 u32 baud_rate_gen; /* Baud Rate Generator [15:0] */ 49 u32 reserved2[4]; 50 u32 channel_sts; /* Channel Status [11:0] */ 51 u32 tx_rx_fifo; /* FIFO [15:0] or [7:0] */ 52 u32 baud_rate_divider; /* Baud Rate Divider [7:0] */ 53 }; 54 55 static struct uart_zynq *uart_zynq_ports[2] = { 56 #ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0 57 [0] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR0, 58 #endif 59 #ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1 60 [1] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR1, 61 #endif 62 }; 63 64 struct uart_zynq_params { 65 u32 baudrate; 66 u32 clock; 67 }; 68 69 static struct uart_zynq_params uart_zynq_ports_param[2] = { 70 #if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0) && defined(CONFIG_ZYNQ_SERIAL_CLOCK0) 71 [0].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE0, 72 [0].clock = CONFIG_ZYNQ_SERIAL_CLOCK0, 73 #endif 74 #if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1) && defined(CONFIG_ZYNQ_SERIAL_CLOCK1) 75 [1].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE1, 76 [1].clock = CONFIG_ZYNQ_SERIAL_CLOCK1, 77 #endif 78 }; 79 80 /* Set up the baud rate in gd struct */ 81 static void uart_zynq_serial_setbrg(const int port) 82 { 83 /* Calculation results. */ 84 unsigned int calc_bauderror, bdiv, bgen; 85 unsigned long calc_baud = 0; 86 unsigned long baud = uart_zynq_ports_param[port].baudrate; 87 unsigned long clock = uart_zynq_ports_param[port].clock; 88 struct uart_zynq *regs = uart_zynq_ports[port]; 89 90 /* master clock 91 * Baud rate = ------------------ 92 * bgen * (bdiv + 1) 93 * 94 * Find acceptable values for baud generation. 95 */ 96 for (bdiv = 4; bdiv < 255; bdiv++) { 97 bgen = clock / (baud * (bdiv + 1)); 98 if (bgen < 2 || bgen > 65535) 99 continue; 100 101 calc_baud = clock / (bgen * (bdiv + 1)); 102 103 /* 104 * Use first calculated baudrate with 105 * an acceptable (<3%) error 106 */ 107 if (baud > calc_baud) 108 calc_bauderror = baud - calc_baud; 109 else 110 calc_bauderror = calc_baud - baud; 111 if (((calc_bauderror * 100) / baud) < 3) 112 break; 113 } 114 115 writel(bdiv, ®s->baud_rate_divider); 116 writel(bgen, ®s->baud_rate_gen); 117 } 118 119 /* Initialize the UART, with...some settings. */ 120 static int uart_zynq_serial_init(const int port) 121 { 122 struct uart_zynq *regs = uart_zynq_ports[port]; 123 124 if (!regs) 125 return -1; 126 127 /* RX/TX enabled & reset */ 128 writel(ZYNQ_UART_CR_TX_EN | ZYNQ_UART_CR_RX_EN | ZYNQ_UART_CR_TXRST | \ 129 ZYNQ_UART_CR_RXRST, ®s->control); 130 writel(ZYNQ_UART_MR_PARITY_NONE, ®s->mode); /* 8 bit, no parity */ 131 uart_zynq_serial_setbrg(port); 132 133 return 0; 134 } 135 136 static void uart_zynq_serial_putc(const char c, const int port) 137 { 138 struct uart_zynq *regs = uart_zynq_ports[port]; 139 140 while ((readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0) 141 WATCHDOG_RESET(); 142 143 if (c == '\n') { 144 writel('\r', ®s->tx_rx_fifo); 145 while ((readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0) 146 WATCHDOG_RESET(); 147 } 148 writel(c, ®s->tx_rx_fifo); 149 } 150 151 static void uart_zynq_serial_puts(const char *s, const int port) 152 { 153 while (*s) 154 uart_zynq_serial_putc(*s++, port); 155 } 156 157 static int uart_zynq_serial_tstc(const int port) 158 { 159 struct uart_zynq *regs = uart_zynq_ports[port]; 160 161 return (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY) == 0; 162 } 163 164 static int uart_zynq_serial_getc(const int port) 165 { 166 struct uart_zynq *regs = uart_zynq_ports[port]; 167 168 while (!uart_zynq_serial_tstc(port)) 169 WATCHDOG_RESET(); 170 return readl(®s->tx_rx_fifo); 171 } 172 173 #if !defined(CONFIG_SERIAL_MULTI) 174 int serial_init(void) 175 { 176 return uart_zynq_serial_init(0); 177 } 178 179 void serial_setbrg(void) 180 { 181 uart_zynq_serial_setbrg(0); 182 } 183 184 void serial_putc(const char c) 185 { 186 uart_zynq_serial_putc(c, 0); 187 } 188 189 void serial_puts(const char *s) 190 { 191 uart_zynq_serial_puts(s, 0); 192 } 193 194 int serial_getc(void) 195 { 196 return uart_zynq_serial_getc(0); 197 } 198 199 int serial_tstc(void) 200 { 201 return uart_zynq_serial_tstc(0); 202 } 203 #else 204 /* Multi serial device functions */ 205 #define DECLARE_PSSERIAL_FUNCTIONS(port) \ 206 int uart_zynq##port##_init(void) \ 207 { return uart_zynq_serial_init(port); } \ 208 void uart_zynq##port##_setbrg(void) \ 209 { return uart_zynq_serial_setbrg(port); } \ 210 int uart_zynq##port##_getc(void) \ 211 { return uart_zynq_serial_getc(port); } \ 212 int uart_zynq##port##_tstc(void) \ 213 { return uart_zynq_serial_tstc(port); } \ 214 void uart_zynq##port##_putc(const char c) \ 215 { uart_zynq_serial_putc(c, port); } \ 216 void uart_zynq##port##_puts(const char *s) \ 217 { uart_zynq_serial_puts(s, port); } 218 219 /* Serial device descriptor */ 220 #define INIT_PSSERIAL_STRUCTURE(port, __name) { \ 221 .name = __name, \ 222 .init = uart_zynq##port##_init, \ 223 .uninit = NULL, \ 224 .setbrg = uart_zynq##port##_setbrg, \ 225 .getc = uart_zynq##port##_getc, \ 226 .tstc = uart_zynq##port##_tstc, \ 227 .putc = uart_zynq##port##_putc, \ 228 .puts = uart_zynq##port##_puts, \ 229 } 230 231 DECLARE_PSSERIAL_FUNCTIONS(0); 232 struct serial_device uart_zynq_serial0_device = 233 INIT_PSSERIAL_STRUCTURE(0, "ttyPS0"); 234 DECLARE_PSSERIAL_FUNCTIONS(1); 235 struct serial_device uart_zynq_serial1_device = 236 INIT_PSSERIAL_STRUCTURE(1, "ttyPS1"); 237 238 __weak struct serial_device *default_serial_console(void) 239 { 240 if (uart_zynq_ports[0]) 241 return &uart_zynq_serial0_device; 242 if (uart_zynq_ports[1]) 243 return &uart_zynq_serial1_device; 244 245 return NULL; 246 } 247 #endif 248