1 /* 2 * SuperH SCIF device driver. 3 * Copyright (C) 2013 Renesas Electronics Corporation 4 * Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu 5 * Copyright (C) 2002 - 2008 Paul Mundt 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include <common.h> 11 #include <errno.h> 12 #include <clk.h> 13 #include <dm.h> 14 #include <asm/io.h> 15 #include <asm/processor.h> 16 #include <serial.h> 17 #include <linux/compiler.h> 18 #include <dm/platform_data/serial_sh.h> 19 #include "serial_sh.h" 20 21 DECLARE_GLOBAL_DATA_PTR; 22 23 #if defined(CONFIG_CPU_SH7760) || \ 24 defined(CONFIG_CPU_SH7780) || \ 25 defined(CONFIG_CPU_SH7785) || \ 26 defined(CONFIG_CPU_SH7786) 27 static int scif_rxfill(struct uart_port *port) 28 { 29 return sci_in(port, SCRFDR) & 0xff; 30 } 31 #elif defined(CONFIG_CPU_SH7763) 32 static int scif_rxfill(struct uart_port *port) 33 { 34 if ((port->mapbase == 0xffe00000) || 35 (port->mapbase == 0xffe08000)) { 36 /* SCIF0/1*/ 37 return sci_in(port, SCRFDR) & 0xff; 38 } else { 39 /* SCIF2 */ 40 return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; 41 } 42 } 43 #elif defined(CONFIG_ARCH_SH7372) 44 static int scif_rxfill(struct uart_port *port) 45 { 46 if (port->type == PORT_SCIFA) 47 return sci_in(port, SCFDR) & SCIF_RFDC_MASK; 48 else 49 return sci_in(port, SCRFDR); 50 } 51 #else 52 static int scif_rxfill(struct uart_port *port) 53 { 54 return sci_in(port, SCFDR) & SCIF_RFDC_MASK; 55 } 56 #endif 57 58 static void sh_serial_init_generic(struct uart_port *port) 59 { 60 sci_out(port, SCSCR , SCSCR_INIT(port)); 61 sci_out(port, SCSCR , SCSCR_INIT(port)); 62 sci_out(port, SCSMR, 0); 63 sci_out(port, SCSMR, 0); 64 sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST); 65 sci_in(port, SCFCR); 66 sci_out(port, SCFCR, 0); 67 } 68 69 static void 70 sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate) 71 { 72 if (port->clk_mode == EXT_CLK) { 73 unsigned short dl = DL_VALUE(baudrate, clk); 74 sci_out(port, DL, dl); 75 /* Need wait: Clock * 1/dl * 1/16 */ 76 udelay((1000000 * dl * 16 / clk) * 1000 + 1); 77 } else { 78 sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk)); 79 } 80 } 81 82 static void handle_error(struct uart_port *port) 83 { 84 sci_in(port, SCxSR); 85 sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); 86 sci_in(port, SCLSR); 87 sci_out(port, SCLSR, 0x00); 88 } 89 90 static int serial_raw_putc(struct uart_port *port, const char c) 91 { 92 /* Tx fifo is empty */ 93 if (!(sci_in(port, SCxSR) & SCxSR_TEND(port))) 94 return -EAGAIN; 95 96 sci_out(port, SCxTDR, c); 97 sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port)); 98 99 return 0; 100 } 101 102 static int serial_rx_fifo_level(struct uart_port *port) 103 { 104 return scif_rxfill(port); 105 } 106 107 static int sh_serial_tstc_generic(struct uart_port *port) 108 { 109 if (sci_in(port, SCxSR) & SCIF_ERRORS) { 110 handle_error(port); 111 return 0; 112 } 113 114 return serial_rx_fifo_level(port) ? 1 : 0; 115 } 116 117 static int serial_getc_check(struct uart_port *port) 118 { 119 unsigned short status; 120 121 status = sci_in(port, SCxSR); 122 123 if (status & SCIF_ERRORS) 124 handle_error(port); 125 if (sci_in(port, SCLSR) & SCxSR_ORER(port)) 126 handle_error(port); 127 return status & (SCIF_DR | SCxSR_RDxF(port)); 128 } 129 130 static int sh_serial_getc_generic(struct uart_port *port) 131 { 132 unsigned short status; 133 char ch; 134 135 if (!serial_getc_check(port)) 136 return -EAGAIN; 137 138 ch = sci_in(port, SCxRDR); 139 status = sci_in(port, SCxSR); 140 141 sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); 142 143 if (status & SCIF_ERRORS) 144 handle_error(port); 145 146 if (sci_in(port, SCLSR) & SCxSR_ORER(port)) 147 handle_error(port); 148 149 return ch; 150 } 151 152 #ifdef CONFIG_DM_SERIAL 153 154 static int sh_serial_pending(struct udevice *dev, bool input) 155 { 156 struct uart_port *priv = dev_get_priv(dev); 157 158 return sh_serial_tstc_generic(priv); 159 } 160 161 static int sh_serial_putc(struct udevice *dev, const char ch) 162 { 163 struct uart_port *priv = dev_get_priv(dev); 164 165 return serial_raw_putc(priv, ch); 166 } 167 168 static int sh_serial_getc(struct udevice *dev) 169 { 170 struct uart_port *priv = dev_get_priv(dev); 171 172 return sh_serial_getc_generic(priv); 173 } 174 175 static int sh_serial_setbrg(struct udevice *dev, int baudrate) 176 { 177 struct sh_serial_platdata *plat = dev_get_platdata(dev); 178 struct uart_port *priv = dev_get_priv(dev); 179 180 sh_serial_setbrg_generic(priv, plat->clk, baudrate); 181 182 return 0; 183 } 184 185 static int sh_serial_probe(struct udevice *dev) 186 { 187 struct sh_serial_platdata *plat = dev_get_platdata(dev); 188 struct uart_port *priv = dev_get_priv(dev); 189 190 priv->membase = (unsigned char *)plat->base; 191 priv->mapbase = plat->base; 192 priv->type = plat->type; 193 priv->clk_mode = plat->clk_mode; 194 195 sh_serial_init_generic(priv); 196 197 return 0; 198 } 199 200 static const struct dm_serial_ops sh_serial_ops = { 201 .putc = sh_serial_putc, 202 .pending = sh_serial_pending, 203 .getc = sh_serial_getc, 204 .setbrg = sh_serial_setbrg, 205 }; 206 207 #ifdef CONFIG_OF_CONTROL 208 static const struct udevice_id sh_serial_id[] ={ 209 {.compatible = "renesas,sci", .data = PORT_SCI}, 210 {.compatible = "renesas,scif", .data = PORT_SCIF}, 211 {.compatible = "renesas,scifa", .data = PORT_SCIFA}, 212 {} 213 }; 214 215 static int sh_serial_ofdata_to_platdata(struct udevice *dev) 216 { 217 struct sh_serial_platdata *plat = dev_get_platdata(dev); 218 struct clk sh_serial_clk; 219 fdt_addr_t addr; 220 int ret; 221 222 addr = fdtdec_get_addr(gd->fdt_blob, dev_of_offset(dev), "reg"); 223 if (addr == FDT_ADDR_T_NONE) 224 return -EINVAL; 225 226 plat->base = addr; 227 228 ret = clk_get_by_name(dev, "fck", &sh_serial_clk); 229 if (!ret) { 230 ret = clk_enable(&sh_serial_clk); 231 if (!ret) 232 plat->clk = clk_get_rate(&sh_serial_clk); 233 } else { 234 plat->clk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), 235 "clock", 1); 236 } 237 238 plat->type = dev_get_driver_data(dev); 239 return 0; 240 } 241 #endif 242 243 U_BOOT_DRIVER(serial_sh) = { 244 .name = "serial_sh", 245 .id = UCLASS_SERIAL, 246 .of_match = of_match_ptr(sh_serial_id), 247 .ofdata_to_platdata = of_match_ptr(sh_serial_ofdata_to_platdata), 248 .platdata_auto_alloc_size = sizeof(struct sh_serial_platdata), 249 .probe = sh_serial_probe, 250 .ops = &sh_serial_ops, 251 .flags = DM_FLAG_PRE_RELOC, 252 .priv_auto_alloc_size = sizeof(struct uart_port), 253 }; 254 255 #else /* CONFIG_DM_SERIAL */ 256 257 #if defined(CONFIG_CONS_SCIF0) 258 # define SCIF_BASE SCIF0_BASE 259 #elif defined(CONFIG_CONS_SCIF1) 260 # define SCIF_BASE SCIF1_BASE 261 #elif defined(CONFIG_CONS_SCIF2) 262 # define SCIF_BASE SCIF2_BASE 263 #elif defined(CONFIG_CONS_SCIF3) 264 # define SCIF_BASE SCIF3_BASE 265 #elif defined(CONFIG_CONS_SCIF4) 266 # define SCIF_BASE SCIF4_BASE 267 #elif defined(CONFIG_CONS_SCIF5) 268 # define SCIF_BASE SCIF5_BASE 269 #elif defined(CONFIG_CONS_SCIF6) 270 # define SCIF_BASE SCIF6_BASE 271 #elif defined(CONFIG_CONS_SCIF7) 272 # define SCIF_BASE SCIF7_BASE 273 #else 274 # error "Default SCIF doesn't set....." 275 #endif 276 277 #if defined(CONFIG_SCIF_A) 278 #define SCIF_BASE_PORT PORT_SCIFA 279 #elif defined(CONFIG_SCI) 280 #define SCIF_BASE_PORT PORT_SCI 281 #else 282 #define SCIF_BASE_PORT PORT_SCIF 283 #endif 284 285 static struct uart_port sh_sci = { 286 .membase = (unsigned char *)SCIF_BASE, 287 .mapbase = SCIF_BASE, 288 .type = SCIF_BASE_PORT, 289 #ifdef CONFIG_SCIF_USE_EXT_CLK 290 .clk_mode = EXT_CLK, 291 #endif 292 }; 293 294 static void sh_serial_setbrg(void) 295 { 296 DECLARE_GLOBAL_DATA_PTR; 297 struct uart_port *port = &sh_sci; 298 299 sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate); 300 } 301 302 static int sh_serial_init(void) 303 { 304 struct uart_port *port = &sh_sci; 305 306 sh_serial_init_generic(port); 307 serial_setbrg(); 308 309 return 0; 310 } 311 312 static void sh_serial_putc(const char c) 313 { 314 struct uart_port *port = &sh_sci; 315 316 if (c == '\n') { 317 while (1) { 318 if (serial_raw_putc(port, '\r') != -EAGAIN) 319 break; 320 } 321 } 322 while (1) { 323 if (serial_raw_putc(port, c) != -EAGAIN) 324 break; 325 } 326 } 327 328 static int sh_serial_tstc(void) 329 { 330 struct uart_port *port = &sh_sci; 331 332 return sh_serial_tstc_generic(port); 333 } 334 335 static int sh_serial_getc(void) 336 { 337 struct uart_port *port = &sh_sci; 338 int ch; 339 340 while (1) { 341 ch = sh_serial_getc_generic(port); 342 if (ch != -EAGAIN) 343 break; 344 } 345 346 return ch; 347 } 348 349 static struct serial_device sh_serial_drv = { 350 .name = "sh_serial", 351 .start = sh_serial_init, 352 .stop = NULL, 353 .setbrg = sh_serial_setbrg, 354 .putc = sh_serial_putc, 355 .puts = default_serial_puts, 356 .getc = sh_serial_getc, 357 .tstc = sh_serial_tstc, 358 }; 359 360 void sh_serial_initialize(void) 361 { 362 serial_register(&sh_serial_drv); 363 } 364 365 __weak struct serial_device *default_serial_console(void) 366 { 367 return &sh_serial_drv; 368 } 369 #endif /* CONFIG_DM_SERIAL */ 370