xref: /openbmc/u-boot/drivers/serial/serial_sh.c (revision 3765b3e7)
1 /*
2  * SuperH SCIF device driver.
3  * Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
4  * Copyright (C) 2002 - 2008  Paul Mundt
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #include <common.h>
10 #include <asm/io.h>
11 #include <asm/processor.h>
12 #include "serial_sh.h"
13 #include <serial.h>
14 #include <linux/compiler.h>
15 
16 #if defined(CONFIG_CONS_SCIF0)
17 # define SCIF_BASE	SCIF0_BASE
18 #elif defined(CONFIG_CONS_SCIF1)
19 # define SCIF_BASE	SCIF1_BASE
20 #elif defined(CONFIG_CONS_SCIF2)
21 # define SCIF_BASE	SCIF2_BASE
22 #elif defined(CONFIG_CONS_SCIF3)
23 # define SCIF_BASE	SCIF3_BASE
24 #elif defined(CONFIG_CONS_SCIF4)
25 # define SCIF_BASE	SCIF4_BASE
26 #elif defined(CONFIG_CONS_SCIF5)
27 # define SCIF_BASE	SCIF5_BASE
28 #elif defined(CONFIG_CONS_SCIF6)
29 # define SCIF_BASE	SCIF6_BASE
30 #elif defined(CONFIG_CONS_SCIF7)
31 # define SCIF_BASE	SCIF7_BASE
32 #else
33 # error "Default SCIF doesn't set....."
34 #endif
35 
36 #if defined(CONFIG_SCIF_A)
37 	#define SCIF_BASE_PORT	PORT_SCIFA
38 #else
39 	#define SCIF_BASE_PORT	PORT_SCIF
40 #endif
41 
42 static struct uart_port sh_sci = {
43 	.membase	= (unsigned char*)SCIF_BASE,
44 	.mapbase	= SCIF_BASE,
45 	.type		= SCIF_BASE_PORT,
46 };
47 
48 static void sh_serial_setbrg(void)
49 {
50 	DECLARE_GLOBAL_DATA_PTR;
51 	sci_out(&sh_sci, SCBRR, SCBRR_VALUE(gd->baudrate, CONFIG_SYS_CLK_FREQ));
52 }
53 
54 static int sh_serial_init(void)
55 {
56 	sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
57 	sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
58 	sci_out(&sh_sci, SCSMR, 0);
59 	sci_out(&sh_sci, SCSMR, 0);
60 	sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
61 	sci_in(&sh_sci, SCFCR);
62 	sci_out(&sh_sci, SCFCR, 0);
63 
64 	serial_setbrg();
65 	return 0;
66 }
67 
68 #if defined(CONFIG_CPU_SH7760) || \
69 	defined(CONFIG_CPU_SH7780) || \
70 	defined(CONFIG_CPU_SH7785) || \
71 	defined(CONFIG_CPU_SH7786)
72 static int scif_rxfill(struct uart_port *port)
73 {
74 	return sci_in(port, SCRFDR) & 0xff;
75 }
76 #elif defined(CONFIG_CPU_SH7763)
77 static int scif_rxfill(struct uart_port *port)
78 {
79 	if ((port->mapbase == 0xffe00000) ||
80 		(port->mapbase == 0xffe08000)) {
81 		/* SCIF0/1*/
82 		return sci_in(port, SCRFDR) & 0xff;
83 	} else {
84 		/* SCIF2 */
85 		return sci_in(port, SCFDR) & SCIF2_RFDC_MASK;
86 	}
87 }
88 #elif defined(CONFIG_ARCH_SH7372)
89 static int scif_rxfill(struct uart_port *port)
90 {
91 	if (port->type == PORT_SCIFA)
92 		return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
93 	else
94 		return sci_in(port, SCRFDR);
95 }
96 #else
97 static int scif_rxfill(struct uart_port *port)
98 {
99 	return sci_in(port, SCFDR) & SCIF_RFDC_MASK;
100 }
101 #endif
102 
103 static int serial_rx_fifo_level(void)
104 {
105 	return scif_rxfill(&sh_sci);
106 }
107 
108 static void handle_error(void)
109 {
110 	sci_in(&sh_sci, SCxSR);
111 	sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
112 	sci_in(&sh_sci, SCLSR);
113 	sci_out(&sh_sci, SCLSR, 0x00);
114 }
115 
116 void serial_raw_putc(const char c)
117 {
118 	while (1) {
119 		/* Tx fifo is empty */
120 		if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
121 			break;
122 	}
123 
124 	sci_out(&sh_sci, SCxTDR, c);
125 	sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
126 }
127 
128 static void sh_serial_putc(const char c)
129 {
130 	if (c == '\n')
131 		serial_raw_putc('\r');
132 	serial_raw_putc(c);
133 }
134 
135 static int sh_serial_tstc(void)
136 {
137 	if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
138 		handle_error();
139 		return 0;
140 	}
141 
142 	return serial_rx_fifo_level() ? 1 : 0;
143 }
144 
145 
146 int serial_getc_check(void)
147 {
148 	unsigned short status;
149 
150 	status = sci_in(&sh_sci, SCxSR);
151 
152 	if (status & SCIF_ERRORS)
153 		handle_error();
154 	if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
155 		handle_error();
156 	return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
157 }
158 
159 static int sh_serial_getc(void)
160 {
161 	unsigned short status;
162 	char ch;
163 
164 	while (!serial_getc_check())
165 		;
166 
167 	ch = sci_in(&sh_sci, SCxRDR);
168 	status = sci_in(&sh_sci, SCxSR);
169 
170 	sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
171 
172 	if (status & SCIF_ERRORS)
173 			handle_error();
174 
175 	if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
176 		handle_error();
177 	return ch;
178 }
179 
180 static struct serial_device sh_serial_drv = {
181 	.name	= "sh_serial",
182 	.start	= sh_serial_init,
183 	.stop	= NULL,
184 	.setbrg	= sh_serial_setbrg,
185 	.putc	= sh_serial_putc,
186 	.puts	= default_serial_puts,
187 	.getc	= sh_serial_getc,
188 	.tstc	= sh_serial_tstc,
189 };
190 
191 void sh_serial_initialize(void)
192 {
193 	serial_register(&sh_serial_drv);
194 }
195 
196 __weak struct serial_device *default_serial_console(void)
197 {
198 	return &sh_serial_drv;
199 }
200