xref: /openbmc/u-boot/drivers/serial/serial_pxa.c (revision 0cb77bfa) 
1 /*
2  * (C) Copyright 2002
3  * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
4  *
5  * (C) Copyright 2002
6  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7  * Marius Groeger <mgroeger@sysgo.de>
8  *
9  * (C) Copyright 2002
10  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
11  * Alex Zuepke <azu@sysgo.de>
12  *
13  * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
14  *
15  * This program is free software; you can redistribute it and/or modify
16  * it under the terms of the GNU General Public License as published by
17  * the Free Software Foundation; either version 2 of the License, or
18  * (at your option) any later version.
19  *
20  * This program is distributed in the hope that it will be useful,
21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
23  * GNU General Public License for more details.
24  *
25  * You should have received a copy of the GNU General Public License
26  * along with this program; if not, write to the Free Software
27  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
28  *
29  */
30 
31 #include <common.h>
32 #include <watchdog.h>
33 #include <serial.h>
34 #include <asm/arch/pxa-regs.h>
35 #include <asm/io.h>
36 
37 DECLARE_GLOBAL_DATA_PTR;
38 
39 #define FFUART_INDEX	0
40 #define BTUART_INDEX	1
41 #define STUART_INDEX	2
42 
43 #ifndef CONFIG_SERIAL_MULTI
44 #if defined (CONFIG_FFUART)
45 #define UART_INDEX	FFUART_INDEX
46 #elif defined (CONFIG_BTUART)
47 #define UART_INDEX	BTUART_INDEX
48 #elif defined (CONFIG_STUART)
49 #define UART_INDEX	STUART_INDEX
50 #else
51 #error "Bad: you didn't configure serial ..."
52 #endif
53 #endif
54 
55 void pxa_setbrg_dev (unsigned int uart_index)
56 {
57 	unsigned int quot = 0;
58 
59 	if (gd->baudrate == 1200)
60 		quot = 768;
61 	else if (gd->baudrate == 9600)
62 		quot = 96;
63 	else if (gd->baudrate == 19200)
64 		quot = 48;
65 	else if (gd->baudrate == 38400)
66 		quot = 24;
67 	else if (gd->baudrate == 57600)
68 		quot = 16;
69 	else if (gd->baudrate == 115200)
70 		quot = 8;
71 	else
72 		hang ();
73 
74 	switch (uart_index) {
75 		case FFUART_INDEX:
76 #ifdef CONFIG_CPU_MONAHANS
77 			writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
78 #else
79 			writel(readl(CKEN) | CKEN6_FFUART, CKEN);
80 #endif /* CONFIG_CPU_MONAHANS */
81 
82 			writel(0, FFIER);	/* Disable for now */
83 			writel(0, FFFCR);	/* No fifos enabled */
84 
85 			/* set baud rate */
86 			writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
87 			writel(quot & 0xff, FFDLL);
88 			writel(quot >> 8, FFDLH);
89 			writel(LCR_WLS0 | LCR_WLS1, FFLCR);
90 
91 			writel(IER_UUE, FFIER);	/* Enable FFUART */
92 		break;
93 
94 		case BTUART_INDEX:
95 #ifdef CONFIG_CPU_MONAHANS
96 			writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
97 #else
98 			writel(readl(CKEN) | CKEN7_BTUART, CKEN);
99 #endif /*  CONFIG_CPU_MONAHANS */
100 
101 			writel(0, BTIER);
102 			writel(0, BTFCR);
103 
104 			/* set baud rate */
105 			writel(LCR_DLAB, BTLCR);
106 			writel(quot & 0xff, BTDLL);
107 			writel(quot >> 8, BTDLH);
108 			writel(LCR_WLS0 | LCR_WLS1, BTLCR);
109 
110 			writel(IER_UUE, BTIER);	/* Enable BFUART */
111 
112 		break;
113 
114 		case STUART_INDEX:
115 #ifdef CONFIG_CPU_MONAHANS
116 			writel(readl(CKENA) | CKENA_23_STUART, CKENA);
117 #else
118 			writel(readl(CKEN) | CKEN5_STUART, CKEN);
119 #endif /* CONFIG_CPU_MONAHANS */
120 
121 			writel(0, STIER);
122 			writel(0, STFCR);
123 
124 			/* set baud rate */
125 			writel(LCR_DLAB, STLCR);
126 			writel(quot & 0xff, STDLL);
127 			writel(quot >> 8, STDLH);
128 			writel(LCR_WLS0 | LCR_WLS1, STLCR);
129 
130 			writel(IER_UUE, STIER);	/* Enable STUART */
131 			break;
132 
133 		default:
134 			hang();
135 	}
136 }
137 
138 
139 /*
140  * Initialise the serial port with the given baudrate. The settings
141  * are always 8 data bits, no parity, 1 stop bit, no start bits.
142  *
143  */
144 int pxa_init_dev (unsigned int uart_index)
145 {
146 	pxa_setbrg_dev (uart_index);
147 
148 	return (0);
149 }
150 
151 
152 /*
153  * Output a single byte to the serial port.
154  */
155 void pxa_putc_dev (unsigned int uart_index,const char c)
156 {
157 	switch (uart_index) {
158 		case FFUART_INDEX:
159 		/* wait for room in the tx FIFO on FFUART */
160 			while ((readl(FFLSR) & LSR_TEMT) == 0)
161 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
162 			writel(c, FFTHR);
163 			break;
164 
165 		case BTUART_INDEX:
166 			while ((readl(BTLSR) & LSR_TEMT) == 0)
167 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
168 			writel(c, BTTHR);
169 			break;
170 
171 		case STUART_INDEX:
172 			while ((readl(STLSR) & LSR_TEMT) == 0)
173 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
174 			writel(c, STTHR);
175 			break;
176 	}
177 
178 	/* If \n, also do \r */
179 	if (c == '\n')
180 		pxa_putc_dev (uart_index,'\r');
181 }
182 
183 /*
184  * Read a single byte from the serial port. Returns 1 on success, 0
185  * otherwise. When the function is succesfull, the character read is
186  * written into its argument c.
187  */
188 int pxa_tstc_dev (unsigned int uart_index)
189 {
190 	switch (uart_index) {
191 		case FFUART_INDEX:
192 			return readl(FFLSR) & LSR_DR;
193 		case BTUART_INDEX:
194 			return readl(BTLSR) & LSR_DR;
195 		case STUART_INDEX:
196 			return readl(STLSR) & LSR_DR;
197 	}
198 	return -1;
199 }
200 
201 /*
202  * Read a single byte from the serial port. Returns 1 on success, 0
203  * otherwise. When the function is succesfull, the character read is
204  * written into its argument c.
205  */
206 int pxa_getc_dev (unsigned int uart_index)
207 {
208 	switch (uart_index) {
209 		case FFUART_INDEX:
210 			while (!(readl(FFLSR) & LSR_DR))
211 				/* Reset HW Watchdog, if needed */
212 				WATCHDOG_RESET();
213 			return (char) readl(FFRBR) & 0xff;
214 
215 		case BTUART_INDEX:
216 			while (!(readl(BTLSR) & LSR_DR))
217 				/* Reset HW Watchdog, if needed */
218 				WATCHDOG_RESET();
219 			return (char) readl(BTRBR) & 0xff;
220 		case STUART_INDEX:
221 			while (!(readl(STLSR) & LSR_DR))
222 				/* Reset HW Watchdog, if needed */
223 				WATCHDOG_RESET();
224 			return (char) readl(STRBR) & 0xff;
225 	}
226 	return -1;
227 }
228 
229 void
230 pxa_puts_dev (unsigned int uart_index,const char *s)
231 {
232 	while (*s) {
233 		pxa_putc_dev (uart_index,*s++);
234 	}
235 }
236 
237 #if defined (CONFIG_FFUART)
238 static int ffuart_init(void)
239 {
240 	return pxa_init_dev(FFUART_INDEX);
241 }
242 
243 static void ffuart_setbrg(void)
244 {
245 	return pxa_setbrg_dev(FFUART_INDEX);
246 }
247 
248 static void ffuart_putc(const char c)
249 {
250 	return pxa_putc_dev(FFUART_INDEX,c);
251 }
252 
253 static void ffuart_puts(const char *s)
254 {
255 	return pxa_puts_dev(FFUART_INDEX,s);
256 }
257 
258 static int ffuart_getc(void)
259 {
260 	return pxa_getc_dev(FFUART_INDEX);
261 }
262 
263 static int ffuart_tstc(void)
264 {
265 	return pxa_tstc_dev(FFUART_INDEX);
266 }
267 
268 struct serial_device serial_ffuart_device =
269 {
270 	"serial_ffuart",
271 	ffuart_init,
272 	NULL,
273 	ffuart_setbrg,
274 	ffuart_getc,
275 	ffuart_tstc,
276 	ffuart_putc,
277 	ffuart_puts,
278 };
279 #endif
280 
281 #if defined (CONFIG_BTUART)
282 static int btuart_init(void)
283 {
284 	return pxa_init_dev(BTUART_INDEX);
285 }
286 
287 static void btuart_setbrg(void)
288 {
289 	return pxa_setbrg_dev(BTUART_INDEX);
290 }
291 
292 static void btuart_putc(const char c)
293 {
294 	return pxa_putc_dev(BTUART_INDEX,c);
295 }
296 
297 static void btuart_puts(const char *s)
298 {
299 	return pxa_puts_dev(BTUART_INDEX,s);
300 }
301 
302 static int btuart_getc(void)
303 {
304 	return pxa_getc_dev(BTUART_INDEX);
305 }
306 
307 static int btuart_tstc(void)
308 {
309 	return pxa_tstc_dev(BTUART_INDEX);
310 }
311 
312 struct serial_device serial_btuart_device =
313 {
314 	"serial_btuart",
315 	btuart_init,
316 	NULL,
317 	btuart_setbrg,
318 	btuart_getc,
319 	btuart_tstc,
320 	btuart_putc,
321 	btuart_puts,
322 };
323 #endif
324 
325 #if defined (CONFIG_STUART)
326 static int stuart_init(void)
327 {
328 	return pxa_init_dev(STUART_INDEX);
329 }
330 
331 static void stuart_setbrg(void)
332 {
333 	return pxa_setbrg_dev(STUART_INDEX);
334 }
335 
336 static void stuart_putc(const char c)
337 {
338 	return pxa_putc_dev(STUART_INDEX,c);
339 }
340 
341 static void stuart_puts(const char *s)
342 {
343 	return pxa_puts_dev(STUART_INDEX,s);
344 }
345 
346 static int stuart_getc(void)
347 {
348 	return pxa_getc_dev(STUART_INDEX);
349 }
350 
351 static int stuart_tstc(void)
352 {
353 	return pxa_tstc_dev(STUART_INDEX);
354 }
355 
356 struct serial_device serial_stuart_device =
357 {
358 	"serial_stuart",
359 	stuart_init,
360 	NULL,
361 	stuart_setbrg,
362 	stuart_getc,
363 	stuart_tstc,
364 	stuart_putc,
365 	stuart_puts,
366 };
367 #endif
368 
369 
370 #ifndef CONFIG_SERIAL_MULTI
371 inline int serial_init(void) {
372 	return (pxa_init_dev(UART_INDEX));
373 }
374 void serial_setbrg(void) {
375 	pxa_setbrg_dev(UART_INDEX);
376 }
377 int serial_getc(void) {
378 	return(pxa_getc_dev(UART_INDEX));
379 }
380 int serial_tstc(void) {
381 	return(pxa_tstc_dev(UART_INDEX));
382 }
383 void serial_putc(const char c) {
384 	pxa_putc_dev(UART_INDEX,c);
385 }
386 void serial_puts(const char *s) {
387 	pxa_puts_dev(UART_INDEX,s);
388 }
389 #endif	/* CONFIG_SERIAL_MULTI */
390