1 /*
2  * (C) Copyright 2000
3  * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
4  *
5  * (C) Copyright 2004
6  * ARM Ltd.
7  * Philippe Robin, <philippe.robin@arm.com>
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 /* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
13 
14 #include <common.h>
15 #include <dm.h>
16 #include <errno.h>
17 #include <watchdog.h>
18 #include <asm/io.h>
19 #include <serial.h>
20 #include <dm/platform_data/serial_pl01x.h>
21 #include <linux/compiler.h>
22 #include "serial_pl01x_internal.h"
23 #include <fdtdec.h>
24 
25 DECLARE_GLOBAL_DATA_PTR;
26 
27 #ifndef CONFIG_DM_SERIAL
28 
29 static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
30 static enum pl01x_type pl01x_type __attribute__ ((section(".data")));
31 static struct pl01x_regs *base_regs __attribute__ ((section(".data")));
32 #define NUM_PORTS (sizeof(port)/sizeof(port[0]))
33 
34 #endif
35 
36 static int pl01x_putc(struct pl01x_regs *regs, char c)
37 {
38 	/* Wait until there is space in the FIFO */
39 	if (readl(&regs->fr) & UART_PL01x_FR_TXFF)
40 		return -EAGAIN;
41 
42 	/* Send the character */
43 	writel(c, &regs->dr);
44 
45 	return 0;
46 }
47 
48 static int pl01x_getc(struct pl01x_regs *regs)
49 {
50 	unsigned int data;
51 
52 	/* Wait until there is data in the FIFO */
53 	if (readl(&regs->fr) & UART_PL01x_FR_RXFE)
54 		return -EAGAIN;
55 
56 	data = readl(&regs->dr);
57 
58 	/* Check for an error flag */
59 	if (data & 0xFFFFFF00) {
60 		/* Clear the error */
61 		writel(0xFFFFFFFF, &regs->ecr);
62 		return -1;
63 	}
64 
65 	return (int) data;
66 }
67 
68 static int pl01x_tstc(struct pl01x_regs *regs)
69 {
70 	WATCHDOG_RESET();
71 	return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
72 }
73 
74 static int pl01x_generic_serial_init(struct pl01x_regs *regs,
75 				     enum pl01x_type type)
76 {
77 	switch (type) {
78 	case TYPE_PL010:
79 		/* disable everything */
80 		writel(0, &regs->pl010_cr);
81 		break;
82 	case TYPE_PL011:
83 		/* disable everything */
84 		writel(0, &regs->pl011_cr);
85 		break;
86 	default:
87 		return -EINVAL;
88 	}
89 
90 	return 0;
91 }
92 
93 static int pl011_set_line_control(struct pl01x_regs *regs)
94 {
95 	unsigned int lcr;
96 	/*
97 	 * Internal update of baud rate register require line
98 	 * control register write
99 	 */
100 	lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
101 	writel(lcr, &regs->pl011_lcrh);
102 	return 0;
103 }
104 
105 static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
106 				int clock, int baudrate)
107 {
108 	switch (type) {
109 	case TYPE_PL010: {
110 		unsigned int divisor;
111 
112 		/* disable everything */
113 		writel(0, &regs->pl010_cr);
114 
115 		switch (baudrate) {
116 		case 9600:
117 			divisor = UART_PL010_BAUD_9600;
118 			break;
119 		case 19200:
120 			divisor = UART_PL010_BAUD_19200;
121 			break;
122 		case 38400:
123 			divisor = UART_PL010_BAUD_38400;
124 			break;
125 		case 57600:
126 			divisor = UART_PL010_BAUD_57600;
127 			break;
128 		case 115200:
129 			divisor = UART_PL010_BAUD_115200;
130 			break;
131 		default:
132 			divisor = UART_PL010_BAUD_38400;
133 		}
134 
135 		writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
136 		writel(divisor & 0xff, &regs->pl010_lcrl);
137 
138 		/*
139 		 * Set line control for the PL010 to be 8 bits, 1 stop bit,
140 		 * no parity, fifo enabled
141 		 */
142 		writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN,
143 		       &regs->pl010_lcrh);
144 		/* Finally, enable the UART */
145 		writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
146 		break;
147 	}
148 	case TYPE_PL011: {
149 		unsigned int temp;
150 		unsigned int divider;
151 		unsigned int remainder;
152 		unsigned int fraction;
153 
154 		/*
155 		* Set baud rate
156 		*
157 		* IBRD = UART_CLK / (16 * BAUD_RATE)
158 		* FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE)))
159 		*		/ (16 * BAUD_RATE))
160 		*/
161 		temp = 16 * baudrate;
162 		divider = clock / temp;
163 		remainder = clock % temp;
164 		temp = (8 * remainder) / baudrate;
165 		fraction = (temp >> 1) + (temp & 1);
166 
167 		writel(divider, &regs->pl011_ibrd);
168 		writel(fraction, &regs->pl011_fbrd);
169 
170 		pl011_set_line_control(regs);
171 		/* Finally, enable the UART */
172 		writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
173 		       UART_PL011_CR_RXE | UART_PL011_CR_RTS, &regs->pl011_cr);
174 		break;
175 	}
176 	default:
177 		return -EINVAL;
178 	}
179 
180 	return 0;
181 }
182 
183 #ifndef CONFIG_DM_SERIAL
184 static void pl01x_serial_init_baud(int baudrate)
185 {
186 	int clock = 0;
187 
188 #if defined(CONFIG_PL010_SERIAL)
189 	pl01x_type = TYPE_PL010;
190 #elif defined(CONFIG_PL011_SERIAL)
191 	pl01x_type = TYPE_PL011;
192 	clock = CONFIG_PL011_CLOCK;
193 #endif
194 	base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
195 
196 	pl01x_generic_serial_init(base_regs, pl01x_type);
197 	pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate);
198 }
199 
200 /*
201  * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
202  * Integrator CP has two UARTs, use the first one, at 38400-8-N-1
203  * Versatile PB has four UARTs.
204  */
205 int pl01x_serial_init(void)
206 {
207 	pl01x_serial_init_baud(CONFIG_BAUDRATE);
208 
209 	return 0;
210 }
211 
212 static void pl01x_serial_putc(const char c)
213 {
214 	if (c == '\n')
215 		while (pl01x_putc(base_regs, '\r') == -EAGAIN);
216 
217 	while (pl01x_putc(base_regs, c) == -EAGAIN);
218 }
219 
220 static int pl01x_serial_getc(void)
221 {
222 	while (1) {
223 		int ch = pl01x_getc(base_regs);
224 
225 		if (ch == -EAGAIN) {
226 			WATCHDOG_RESET();
227 			continue;
228 		}
229 
230 		return ch;
231 	}
232 }
233 
234 static int pl01x_serial_tstc(void)
235 {
236 	return pl01x_tstc(base_regs);
237 }
238 
239 static void pl01x_serial_setbrg(void)
240 {
241 	/*
242 	 * Flush FIFO and wait for non-busy before changing baudrate to avoid
243 	 * crap in console
244 	 */
245 	while (!(readl(&base_regs->fr) & UART_PL01x_FR_TXFE))
246 		WATCHDOG_RESET();
247 	while (readl(&base_regs->fr) & UART_PL01x_FR_BUSY)
248 		WATCHDOG_RESET();
249 	pl01x_serial_init_baud(gd->baudrate);
250 }
251 
252 static struct serial_device pl01x_serial_drv = {
253 	.name	= "pl01x_serial",
254 	.start	= pl01x_serial_init,
255 	.stop	= NULL,
256 	.setbrg	= pl01x_serial_setbrg,
257 	.putc	= pl01x_serial_putc,
258 	.puts	= default_serial_puts,
259 	.getc	= pl01x_serial_getc,
260 	.tstc	= pl01x_serial_tstc,
261 };
262 
263 void pl01x_serial_initialize(void)
264 {
265 	serial_register(&pl01x_serial_drv);
266 }
267 
268 __weak struct serial_device *default_serial_console(void)
269 {
270 	return &pl01x_serial_drv;
271 }
272 
273 #endif /* nCONFIG_DM_SERIAL */
274 
275 #ifdef CONFIG_DM_SERIAL
276 
277 struct pl01x_priv {
278 	struct pl01x_regs *regs;
279 	enum pl01x_type type;
280 };
281 
282 static int pl01x_serial_setbrg(struct udevice *dev, int baudrate)
283 {
284 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
285 	struct pl01x_priv *priv = dev_get_priv(dev);
286 
287 	if (!plat->skip_init) {
288 		pl01x_generic_setbrg(priv->regs, priv->type, plat->clock,
289 				     baudrate);
290 	}
291 
292 	return 0;
293 }
294 
295 static int pl01x_serial_probe(struct udevice *dev)
296 {
297 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
298 	struct pl01x_priv *priv = dev_get_priv(dev);
299 
300 	priv->regs = (struct pl01x_regs *)plat->base;
301 	priv->type = plat->type;
302 	if (!plat->skip_init)
303 		return pl01x_generic_serial_init(priv->regs, priv->type);
304 	else
305 		return 0;
306 }
307 
308 static int pl01x_serial_getc(struct udevice *dev)
309 {
310 	struct pl01x_priv *priv = dev_get_priv(dev);
311 
312 	return pl01x_getc(priv->regs);
313 }
314 
315 static int pl01x_serial_putc(struct udevice *dev, const char ch)
316 {
317 	struct pl01x_priv *priv = dev_get_priv(dev);
318 
319 	return pl01x_putc(priv->regs, ch);
320 }
321 
322 static int pl01x_serial_pending(struct udevice *dev, bool input)
323 {
324 	struct pl01x_priv *priv = dev_get_priv(dev);
325 	unsigned int fr = readl(&priv->regs->fr);
326 
327 	if (input)
328 		return pl01x_tstc(priv->regs);
329 	else
330 		return fr & UART_PL01x_FR_TXFF ? 0 : 1;
331 }
332 
333 static const struct dm_serial_ops pl01x_serial_ops = {
334 	.putc = pl01x_serial_putc,
335 	.pending = pl01x_serial_pending,
336 	.getc = pl01x_serial_getc,
337 	.setbrg = pl01x_serial_setbrg,
338 };
339 
340 #if CONFIG_IS_ENABLED(OF_CONTROL)
341 static const struct udevice_id pl01x_serial_id[] ={
342 	{.compatible = "arm,pl011", .data = TYPE_PL011},
343 	{.compatible = "arm,pl010", .data = TYPE_PL010},
344 	{}
345 };
346 
347 static int pl01x_serial_ofdata_to_platdata(struct udevice *dev)
348 {
349 	struct pl01x_serial_platdata *plat = dev_get_platdata(dev);
350 	fdt_addr_t addr;
351 
352 	addr = devfdt_get_addr(dev);
353 	if (addr == FDT_ADDR_T_NONE)
354 		return -EINVAL;
355 
356 	plat->base = addr;
357 	plat->clock = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "clock",
358 				     1);
359 	plat->type = dev_get_driver_data(dev);
360 	plat->skip_init = fdtdec_get_bool(gd->fdt_blob, dev_of_offset(dev),
361 	                                  "skip-init");
362 	return 0;
363 }
364 #endif
365 
366 U_BOOT_DRIVER(serial_pl01x) = {
367 	.name	= "serial_pl01x",
368 	.id	= UCLASS_SERIAL,
369 	.of_match = of_match_ptr(pl01x_serial_id),
370 	.ofdata_to_platdata = of_match_ptr(pl01x_serial_ofdata_to_platdata),
371 	.platdata_auto_alloc_size = sizeof(struct pl01x_serial_platdata),
372 	.probe = pl01x_serial_probe,
373 	.ops	= &pl01x_serial_ops,
374 	.flags = DM_FLAG_PRE_RELOC,
375 	.priv_auto_alloc_size = sizeof(struct pl01x_priv),
376 };
377 
378 #endif
379 
380 #if defined(CONFIG_DEBUG_UART_PL010) || defined(CONFIG_DEBUG_UART_PL011)
381 
382 #include <debug_uart.h>
383 
384 static void _debug_uart_init(void)
385 {
386 #ifndef CONFIG_DEBUG_UART_SKIP_INIT
387 	struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
388 	enum pl01x_type type = CONFIG_IS_ENABLED(DEBUG_UART_PL011) ?
389 				TYPE_PL011 : TYPE_PL010;
390 
391 	pl01x_generic_serial_init(regs, type);
392 	pl01x_generic_setbrg(regs, type,
393 			     CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
394 #endif
395 }
396 
397 static inline void _debug_uart_putc(int ch)
398 {
399 	struct pl01x_regs *regs = (struct pl01x_regs *)CONFIG_DEBUG_UART_BASE;
400 
401 	pl01x_putc(regs, ch);
402 }
403 
404 DEBUG_UART_FUNCS
405 
406 #endif
407