1 /*
2  * (C) Copyright 2000
3  * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
4  *
5  * (C) Copyright 2004
6  * ARM Ltd.
7  * Philippe Robin, <philippe.robin@arm.com>
8  *
9  * See file CREDITS for list of people who contributed to this
10  * project.
11  *
12  * This program is free software; you can redistribute it and/or
13  * modify it under the terms of the GNU General Public License as
14  * published by the Free Software Foundation; either version 2 of
15  * the License, or (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25  * MA 02111-1307 USA
26  */
27 
28 /* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
29 
30 #include <common.h>
31 #include <watchdog.h>
32 #include <asm/io.h>
33 #include "serial_pl01x.h"
34 
35 /*
36  * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
37  * Integrator CP has two UARTs, use the first one, at 38400-8-N-1
38  * Versatile PB has four UARTs.
39  */
40 #define CONSOLE_PORT CONFIG_CONS_INDEX
41 static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
42 #define NUM_PORTS (sizeof(port)/sizeof(port[0]))
43 
44 static void pl01x_putc (int portnum, char c);
45 static int pl01x_getc (int portnum);
46 static int pl01x_tstc (int portnum);
47 unsigned int baudrate = CONFIG_BAUDRATE;
48 DECLARE_GLOBAL_DATA_PTR;
49 
50 static struct pl01x_regs *pl01x_get_regs(int portnum)
51 {
52 	return (struct pl01x_regs *) port[portnum];
53 }
54 
55 #ifdef CONFIG_PL010_SERIAL
56 
57 int serial_init (void)
58 {
59 	struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
60 	unsigned int divisor;
61 
62 	/* First, disable everything */
63 	writel(0, &regs->pl010_cr);
64 
65 	/* Set baud rate */
66 	switch (baudrate) {
67 	case 9600:
68 		divisor = UART_PL010_BAUD_9600;
69 		break;
70 
71 	case 19200:
72 		divisor = UART_PL010_BAUD_9600;
73 		break;
74 
75 	case 38400:
76 		divisor = UART_PL010_BAUD_38400;
77 		break;
78 
79 	case 57600:
80 		divisor = UART_PL010_BAUD_57600;
81 		break;
82 
83 	case 115200:
84 		divisor = UART_PL010_BAUD_115200;
85 		break;
86 
87 	default:
88 		divisor = UART_PL010_BAUD_38400;
89 	}
90 
91 	writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
92 	writel(divisor & 0xff, &regs->pl010_lcrl);
93 
94 	/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
95 	writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh);
96 
97 	/* Finally, enable the UART */
98 	writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
99 
100 	return 0;
101 }
102 
103 #endif /* CONFIG_PL010_SERIAL */
104 
105 #ifdef CONFIG_PL011_SERIAL
106 
107 int serial_init (void)
108 {
109 	struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
110 	unsigned int temp;
111 	unsigned int divider;
112 	unsigned int remainder;
113 	unsigned int fraction;
114 
115 	/* First, disable everything */
116 	writel(0, &regs->pl011_cr);
117 
118 	/*
119 	 * Set baud rate
120 	 *
121 	 * IBRD = UART_CLK / (16 * BAUD_RATE)
122 	 * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
123 	 */
124 	temp = 16 * baudrate;
125 	divider = CONFIG_PL011_CLOCK / temp;
126 	remainder = CONFIG_PL011_CLOCK % temp;
127 	temp = (8 * remainder) / baudrate;
128 	fraction = (temp >> 1) + (temp & 1);
129 
130 	writel(divider, &regs->pl011_ibrd);
131 	writel(fraction, &regs->pl011_fbrd);
132 
133 	/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
134 	writel(UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN,
135 	       &regs->pl011_lcrh);
136 
137 	/* Finally, enable the UART */
138 	writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE,
139 	       &regs->pl011_cr);
140 
141 	return 0;
142 }
143 
144 #endif /* CONFIG_PL011_SERIAL */
145 
146 void serial_putc (const char c)
147 {
148 	if (c == '\n')
149 		pl01x_putc (CONSOLE_PORT, '\r');
150 
151 	pl01x_putc (CONSOLE_PORT, c);
152 }
153 
154 void serial_puts (const char *s)
155 {
156 	while (*s) {
157 		serial_putc (*s++);
158 	}
159 }
160 
161 int serial_getc (void)
162 {
163 	return pl01x_getc (CONSOLE_PORT);
164 }
165 
166 int serial_tstc (void)
167 {
168 	return pl01x_tstc (CONSOLE_PORT);
169 }
170 
171 void serial_setbrg (void)
172 {
173 	baudrate = gd->baudrate;
174 	serial_init();
175 }
176 
177 static void pl01x_putc (int portnum, char c)
178 {
179 	struct pl01x_regs *regs = pl01x_get_regs(portnum);
180 
181 	/* Wait until there is space in the FIFO */
182 	while (readl(&regs->fr) & UART_PL01x_FR_TXFF)
183 		WATCHDOG_RESET();
184 
185 	/* Send the character */
186 	writel(c, &regs->dr);
187 }
188 
189 static int pl01x_getc (int portnum)
190 {
191 	struct pl01x_regs *regs = pl01x_get_regs(portnum);
192 	unsigned int data;
193 
194 	/* Wait until there is data in the FIFO */
195 	while (readl(&regs->fr) & UART_PL01x_FR_RXFE)
196 		WATCHDOG_RESET();
197 
198 	data = readl(&regs->dr);
199 
200 	/* Check for an error flag */
201 	if (data & 0xFFFFFF00) {
202 		/* Clear the error */
203 		writel(0xFFFFFFFF, &regs->ecr);
204 		return -1;
205 	}
206 
207 	return (int) data;
208 }
209 
210 static int pl01x_tstc (int portnum)
211 {
212 	struct pl01x_regs *regs = pl01x_get_regs(portnum);
213 
214 	WATCHDOG_RESET();
215 	return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
216 }
217