1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * SPDX-License-Identifier:	GPL-2.0+
5  */
6 
7 #include <common.h>
8 #include <dm.h>
9 #include <watchdog.h>
10 #include <asm/io.h>
11 #include <serial.h>
12 #include <linux/compiler.h>
13 #include <asm/arch/imx-regs.h>
14 #include <asm/arch/clock.h>
15 
16 #define US1_TDRE	(1 << 7)
17 #define US1_RDRF	(1 << 5)
18 #define US1_OR		(1 << 3)
19 #define UC2_TE		(1 << 3)
20 #define UC2_RE		(1 << 2)
21 #define CFIFO_TXFLUSH	(1 << 7)
22 #define CFIFO_RXFLUSH	(1 << 6)
23 #define SFIFO_RXOF	(1 << 2)
24 #define SFIFO_RXUF	(1 << 0)
25 
26 #define STAT_LBKDIF	(1 << 31)
27 #define STAT_RXEDGIF	(1 << 30)
28 #define STAT_TDRE	(1 << 23)
29 #define STAT_RDRF	(1 << 21)
30 #define STAT_IDLE	(1 << 20)
31 #define STAT_OR		(1 << 19)
32 #define STAT_NF		(1 << 18)
33 #define STAT_FE		(1 << 17)
34 #define STAT_PF		(1 << 16)
35 #define STAT_MA1F	(1 << 15)
36 #define STAT_MA2F	(1 << 14)
37 #define STAT_FLAGS	(STAT_LBKDIF | STAT_RXEDGIF | STAT_IDLE | STAT_OR | \
38 			 STAT_NF | STAT_FE | STAT_PF | STAT_MA1F | STAT_MA2F)
39 
40 #define CTRL_TE		(1 << 19)
41 #define CTRL_RE		(1 << 18)
42 
43 #define FIFO_TXFE		0x80
44 #define FIFO_RXFE		0x40
45 
46 #define WATER_TXWATER_OFF	1
47 #define WATER_RXWATER_OFF	16
48 
49 DECLARE_GLOBAL_DATA_PTR;
50 
51 struct lpuart_serial_platdata {
52 	struct lpuart_fsl *reg;
53 };
54 
55 #ifndef CONFIG_LPUART_32B_REG
56 static void _lpuart_serial_setbrg(struct lpuart_fsl *base, int baudrate)
57 {
58 	u32 clk = mxc_get_clock(MXC_UART_CLK);
59 	u16 sbr;
60 
61 	sbr = (u16)(clk / (16 * baudrate));
62 
63 	/* place adjustment later - n/32 BRFA */
64 	__raw_writeb(sbr >> 8, &base->ubdh);
65 	__raw_writeb(sbr & 0xff, &base->ubdl);
66 }
67 
68 static int _lpuart_serial_getc(struct lpuart_fsl *base)
69 {
70 	while (!(__raw_readb(&base->us1) & (US1_RDRF | US1_OR)))
71 		WATCHDOG_RESET();
72 
73 	barrier();
74 
75 	return __raw_readb(&base->ud);
76 }
77 
78 static void _lpuart_serial_putc(struct lpuart_fsl *base, const char c)
79 {
80 	while (!(__raw_readb(&base->us1) & US1_TDRE))
81 		WATCHDOG_RESET();
82 
83 	__raw_writeb(c, &base->ud);
84 }
85 
86 /* Test whether a character is in the RX buffer */
87 static int _lpuart_serial_tstc(struct lpuart_fsl *base)
88 {
89 	if (__raw_readb(&base->urcfifo) == 0)
90 		return 0;
91 
92 	return 1;
93 }
94 
95 /*
96  * Initialise the serial port with the given baudrate. The settings
97  * are always 8 data bits, no parity, 1 stop bit, no start bits.
98  */
99 static int _lpuart_serial_init(struct lpuart_fsl *base)
100 {
101 	u8 ctrl;
102 
103 	ctrl = __raw_readb(&base->uc2);
104 	ctrl &= ~UC2_RE;
105 	ctrl &= ~UC2_TE;
106 	__raw_writeb(ctrl, &base->uc2);
107 
108 	__raw_writeb(0, &base->umodem);
109 	__raw_writeb(0, &base->uc1);
110 
111 	/* Disable FIFO and flush buffer */
112 	__raw_writeb(0x0, &base->upfifo);
113 	__raw_writeb(0x0, &base->utwfifo);
114 	__raw_writeb(0x1, &base->urwfifo);
115 	__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
116 
117 	/* provide data bits, parity, stop bit, etc */
118 	_lpuart_serial_setbrg(base, gd->baudrate);
119 
120 	__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
121 
122 	return 0;
123 }
124 
125 static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
126 {
127 	struct lpuart_serial_platdata *plat = dev->platdata;
128 	struct lpuart_fsl *reg = plat->reg;
129 
130 	_lpuart_serial_setbrg(reg, baudrate);
131 
132 	return 0;
133 }
134 
135 static int lpuart_serial_getc(struct udevice *dev)
136 {
137 	struct lpuart_serial_platdata *plat = dev->platdata;
138 	struct lpuart_fsl *reg = plat->reg;
139 
140 	return _lpuart_serial_getc(reg);
141 }
142 
143 static int lpuart_serial_putc(struct udevice *dev, const char c)
144 {
145 	struct lpuart_serial_platdata *plat = dev->platdata;
146 	struct lpuart_fsl *reg = plat->reg;
147 
148 	_lpuart_serial_putc(reg, c);
149 
150 	return 0;
151 }
152 
153 static int lpuart_serial_pending(struct udevice *dev, bool input)
154 {
155 	struct lpuart_serial_platdata *plat = dev->platdata;
156 	struct lpuart_fsl *reg = plat->reg;
157 
158 	if (input)
159 		return _lpuart_serial_tstc(reg);
160 	else
161 		return __raw_readb(&reg->us1) & US1_TDRE ? 0 : 1;
162 }
163 
164 static int lpuart_serial_probe(struct udevice *dev)
165 {
166 	struct lpuart_serial_platdata *plat = dev->platdata;
167 	struct lpuart_fsl *reg = plat->reg;
168 
169 	return _lpuart_serial_init(reg);
170 }
171 #else
172 
173 static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
174 {
175 	u32 clk = CONFIG_SYS_CLK_FREQ;
176 	u32 sbr;
177 
178 	sbr = (clk / (16 * baudrate));
179 
180 	/* place adjustment later - n/32 BRFA */
181 	out_be32(&base->baud, sbr);
182 }
183 
184 static int _lpuart32_serial_getc(struct lpuart_fsl *base)
185 {
186 	u32 stat;
187 
188 	while (((stat = in_be32(&base->stat)) & STAT_RDRF) == 0) {
189 		out_be32(&base->stat, STAT_FLAGS);
190 		WATCHDOG_RESET();
191 	}
192 
193 	return in_be32(&base->data) & 0x3ff;
194 }
195 
196 static void _lpuart32_serial_putc(struct lpuart_fsl *base, const char c)
197 {
198 	while (!(in_be32(&base->stat) & STAT_TDRE))
199 		WATCHDOG_RESET();
200 
201 	out_be32(&base->data, c);
202 }
203 
204 /* Test whether a character is in the RX buffer */
205 static int _lpuart32_serial_tstc(struct lpuart_fsl *base)
206 {
207 	if ((in_be32(&base->water) >> 24) == 0)
208 		return 0;
209 
210 	return 1;
211 }
212 
213 /*
214  * Initialise the serial port with the given baudrate. The settings
215  * are always 8 data bits, no parity, 1 stop bit, no start bits.
216  */
217 static int _lpuart32_serial_init(struct lpuart_fsl *base)
218 {
219 	u8 ctrl;
220 
221 	ctrl = in_be32(&base->ctrl);
222 	ctrl &= ~CTRL_RE;
223 	ctrl &= ~CTRL_TE;
224 	out_be32(&base->ctrl, ctrl);
225 
226 	out_be32(&base->modir, 0);
227 	out_be32(&base->fifo, ~(FIFO_TXFE | FIFO_RXFE));
228 
229 	out_be32(&base->match, 0);
230 
231 	/* provide data bits, parity, stop bit, etc */
232 	_lpuart32_serial_setbrg(base, gd->baudrate);
233 
234 	out_be32(&base->ctrl, CTRL_RE | CTRL_TE);
235 
236 	return 0;
237 }
238 
239 static int lpuart32_serial_setbrg(struct udevice *dev, int baudrate)
240 {
241 	struct lpuart_serial_platdata *plat = dev->platdata;
242 	struct lpuart_fsl *reg = plat->reg;
243 
244 	_lpuart32_serial_setbrg(reg, baudrate);
245 
246 	return 0;
247 }
248 
249 static int lpuart32_serial_getc(struct udevice *dev)
250 {
251 	struct lpuart_serial_platdata *plat = dev->platdata;
252 	struct lpuart_fsl *reg = plat->reg;
253 
254 	return _lpuart32_serial_getc(reg);
255 }
256 
257 static int lpuart32_serial_putc(struct udevice *dev, const char c)
258 {
259 	struct lpuart_serial_platdata *plat = dev->platdata;
260 	struct lpuart_fsl *reg = plat->reg;
261 
262 	_lpuart32_serial_putc(reg, c);
263 
264 	return 0;
265 }
266 
267 static int lpuart32_serial_pending(struct udevice *dev, bool input)
268 {
269 	struct lpuart_serial_platdata *plat = dev->platdata;
270 	struct lpuart_fsl *reg = plat->reg;
271 
272 	if (input)
273 		return _lpuart32_serial_tstc(reg);
274 	else
275 		return in_be32(&reg->stat) & STAT_TDRE ? 0 : 1;
276 }
277 
278 static int lpuart32_serial_probe(struct udevice *dev)
279 {
280 	struct lpuart_serial_platdata *plat = dev->platdata;
281 	struct lpuart_fsl *reg = plat->reg;
282 
283 	return _lpuart32_serial_init(reg);
284 }
285 #endif /* CONFIG_LPUART_32B_REG */
286 
287 static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
288 {
289 	struct lpuart_serial_platdata *plat = dev->platdata;
290 	fdt_addr_t addr;
291 
292 	addr = dev_get_addr(dev);
293 	if (addr == FDT_ADDR_T_NONE)
294 		return -EINVAL;
295 
296 	plat->reg = (struct lpuart_fsl *)addr;
297 
298 	return 0;
299 }
300 
301 #ifndef CONFIG_LPUART_32B_REG
302 static const struct dm_serial_ops lpuart_serial_ops = {
303 	.putc = lpuart_serial_putc,
304 	.pending = lpuart_serial_pending,
305 	.getc = lpuart_serial_getc,
306 	.setbrg = lpuart_serial_setbrg,
307 };
308 
309 static const struct udevice_id lpuart_serial_ids[] = {
310 	{ .compatible = "fsl,vf610-lpuart" },
311 	{ }
312 };
313 
314 U_BOOT_DRIVER(serial_lpuart) = {
315 	.name	= "serial_lpuart",
316 	.id	= UCLASS_SERIAL,
317 	.of_match = lpuart_serial_ids,
318 	.ofdata_to_platdata = lpuart_serial_ofdata_to_platdata,
319 	.platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata),
320 	.probe = lpuart_serial_probe,
321 	.ops	= &lpuart_serial_ops,
322 	.flags = DM_FLAG_PRE_RELOC,
323 };
324 #else /* CONFIG_LPUART_32B_REG */
325 static const struct dm_serial_ops lpuart32_serial_ops = {
326 	.putc = lpuart32_serial_putc,
327 	.pending = lpuart32_serial_pending,
328 	.getc = lpuart32_serial_getc,
329 	.setbrg = lpuart32_serial_setbrg,
330 };
331 
332 static const struct udevice_id lpuart32_serial_ids[] = {
333 	{ .compatible = "fsl,ls1021a-lpuart" },
334 	{ }
335 };
336 
337 U_BOOT_DRIVER(serial_lpuart32) = {
338 	.name	= "serial_lpuart32",
339 	.id	= UCLASS_SERIAL,
340 	.of_match = lpuart32_serial_ids,
341 	.ofdata_to_platdata = lpuart_serial_ofdata_to_platdata,
342 	.platdata_auto_alloc_size = sizeof(struct lpuart_serial_platdata),
343 	.probe = lpuart32_serial_probe,
344 	.ops	= &lpuart32_serial_ops,
345 	.flags = DM_FLAG_PRE_RELOC,
346 };
347 #endif /* CONFIG_LPUART_32B_REG */
348