1 /* 2 * COM1 NS16550 support 3 * originally from linux source (arch/powerpc/boot/ns16550.c) 4 * modified to use CONFIG_SYS_ISA_MEM and new defines 5 */ 6 7 #include <common.h> 8 #include <dm.h> 9 #include <errno.h> 10 #include <fdtdec.h> 11 #include <ns16550.h> 12 #include <serial.h> 13 #include <watchdog.h> 14 #include <linux/types.h> 15 #include <asm/io.h> 16 17 DECLARE_GLOBAL_DATA_PTR; 18 19 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ 20 #define UART_MCRVAL (UART_MCR_DTR | \ 21 UART_MCR_RTS) /* RTS/DTR */ 22 #define UART_FCRVAL (UART_FCR_FIFO_EN | \ 23 UART_FCR_RXSR | \ 24 UART_FCR_TXSR) /* Clear & enable FIFOs */ 25 26 #ifndef CONFIG_DM_SERIAL 27 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 28 #define serial_out(x, y) outb(x, (ulong)y) 29 #define serial_in(y) inb((ulong)y) 30 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) 31 #define serial_out(x, y) out_be32(y, x) 32 #define serial_in(y) in_be32(y) 33 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) 34 #define serial_out(x, y) out_le32(y, x) 35 #define serial_in(y) in_le32(y) 36 #else 37 #define serial_out(x, y) writeb(x, y) 38 #define serial_in(y) readb(y) 39 #endif 40 #endif /* !CONFIG_DM_SERIAL */ 41 42 #if defined(CONFIG_SOC_KEYSTONE) 43 #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 44 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) 45 #undef UART_MCRVAL 46 #ifdef CONFIG_SERIAL_HW_FLOW_CONTROL 47 #define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) 48 #else 49 #define UART_MCRVAL (UART_MCR_RTS) 50 #endif 51 #endif 52 53 #ifndef CONFIG_SYS_NS16550_IER 54 #define CONFIG_SYS_NS16550_IER 0x00 55 #endif /* CONFIG_SYS_NS16550_IER */ 56 57 #ifdef CONFIG_DM_SERIAL 58 59 #ifndef CONFIG_SYS_NS16550_CLK 60 #define CONFIG_SYS_NS16550_CLK 0 61 #endif 62 63 static inline void serial_out_shift(void *addr, int shift, int value) 64 { 65 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 66 outb(value, (ulong)addr); 67 #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) 68 out_le32(addr, value); 69 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 70 out_be32(addr, value); 71 #elif defined(CONFIG_SYS_NS16550_MEM32) 72 writel(value, addr); 73 #elif defined(CONFIG_SYS_BIG_ENDIAN) 74 writeb(value, addr + (1 << shift) - 1); 75 #else 76 writeb(value, addr); 77 #endif 78 } 79 80 static inline int serial_in_shift(void *addr, int shift) 81 { 82 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 83 return inb((ulong)addr); 84 #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) 85 return in_le32(addr); 86 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 87 return in_be32(addr); 88 #elif defined(CONFIG_SYS_NS16550_MEM32) 89 return readl(addr); 90 #elif defined(CONFIG_SYS_BIG_ENDIAN) 91 return readb(addr + (1 << shift) - 1); 92 #else 93 return readb(addr); 94 #endif 95 } 96 97 static void ns16550_writeb(NS16550_t port, int offset, int value) 98 { 99 struct ns16550_platdata *plat = port->plat; 100 unsigned char *addr; 101 102 offset *= 1 << plat->reg_shift; 103 addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset; 104 /* 105 * As far as we know it doesn't make sense to support selection of 106 * these options at run-time, so use the existing CONFIG options. 107 */ 108 serial_out_shift(addr, plat->reg_shift, value); 109 } 110 111 static int ns16550_readb(NS16550_t port, int offset) 112 { 113 struct ns16550_platdata *plat = port->plat; 114 unsigned char *addr; 115 116 offset *= 1 << plat->reg_shift; 117 addr = map_physmem(plat->base, 0, MAP_NOCACHE) + offset; 118 119 return serial_in_shift(addr, plat->reg_shift); 120 } 121 122 /* We can clean these up once everything is moved to driver model */ 123 #define serial_out(value, addr) \ 124 ns16550_writeb(com_port, \ 125 (unsigned char *)addr - (unsigned char *)com_port, value) 126 #define serial_in(addr) \ 127 ns16550_readb(com_port, \ 128 (unsigned char *)addr - (unsigned char *)com_port) 129 #endif 130 131 static inline int calc_divisor(NS16550_t port, int clock, int baudrate) 132 { 133 const unsigned int mode_x_div = 16; 134 135 return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); 136 } 137 138 int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) 139 { 140 #ifdef CONFIG_OMAP1510 141 /* If can't cleanly clock 115200 set div to 1 */ 142 if ((clock == 12000000) && (baudrate == 115200)) { 143 port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */ 144 return 1; /* return 1 for base divisor */ 145 } 146 port->osc_12m_sel = 0; /* clear if previsouly set */ 147 #endif 148 149 return calc_divisor(port, clock, baudrate); 150 } 151 152 static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) 153 { 154 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); 155 serial_out(baud_divisor & 0xff, &com_port->dll); 156 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 157 serial_out(UART_LCRVAL, &com_port->lcr); 158 } 159 160 void NS16550_init(NS16550_t com_port, int baud_divisor) 161 { 162 #if (defined(CONFIG_SPL_BUILD) && \ 163 (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) 164 /* 165 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode 166 * before SPL starts only THRE bit is set. We have to empty the 167 * transmitter before initialization starts. 168 */ 169 if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) 170 == UART_LSR_THRE) { 171 if (baud_divisor != -1) 172 NS16550_setbrg(com_port, baud_divisor); 173 serial_out(0, &com_port->mdr1); 174 } 175 #endif 176 177 while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) 178 ; 179 180 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 181 #if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \ 182 defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) 183 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ 184 #endif 185 serial_out(UART_MCRVAL, &com_port->mcr); 186 serial_out(UART_FCRVAL, &com_port->fcr); 187 if (baud_divisor != -1) 188 NS16550_setbrg(com_port, baud_divisor); 189 #if defined(CONFIG_OMAP) || \ 190 defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ 191 defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) 192 193 /* /16 is proper to hit 115200 with 48MHz */ 194 serial_out(0, &com_port->mdr1); 195 #endif /* CONFIG_OMAP */ 196 #if defined(CONFIG_SOC_KEYSTONE) 197 serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); 198 #endif 199 } 200 201 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 202 void NS16550_reinit(NS16550_t com_port, int baud_divisor) 203 { 204 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 205 NS16550_setbrg(com_port, 0); 206 serial_out(UART_MCRVAL, &com_port->mcr); 207 serial_out(UART_FCRVAL, &com_port->fcr); 208 NS16550_setbrg(com_port, baud_divisor); 209 } 210 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 211 212 void NS16550_putc(NS16550_t com_port, char c) 213 { 214 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) 215 ; 216 serial_out(c, &com_port->thr); 217 218 /* 219 * Call watchdog_reset() upon newline. This is done here in putc 220 * since the environment code uses a single puts() to print the complete 221 * environment upon "printenv". So we can't put this watchdog call 222 * in puts(). 223 */ 224 if (c == '\n') 225 WATCHDOG_RESET(); 226 } 227 228 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 229 char NS16550_getc(NS16550_t com_port) 230 { 231 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { 232 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) 233 extern void usbtty_poll(void); 234 usbtty_poll(); 235 #endif 236 WATCHDOG_RESET(); 237 } 238 return serial_in(&com_port->rbr); 239 } 240 241 int NS16550_tstc(NS16550_t com_port) 242 { 243 return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; 244 } 245 246 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 247 248 #ifdef CONFIG_DEBUG_UART_NS16550 249 250 #include <debug_uart.h> 251 252 #define serial_dout(reg, value) \ 253 serial_out_shift((char *)com_port + \ 254 ((char *)reg - (char *)com_port) * \ 255 (1 << CONFIG_DEBUG_UART_SHIFT), \ 256 CONFIG_DEBUG_UART_SHIFT, value) 257 #define serial_din(reg) \ 258 serial_in_shift((char *)com_port + \ 259 ((char *)reg - (char *)com_port) * \ 260 (1 << CONFIG_DEBUG_UART_SHIFT), \ 261 CONFIG_DEBUG_UART_SHIFT) 262 263 static inline void _debug_uart_init(void) 264 { 265 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 266 int baud_divisor; 267 268 /* 269 * We copy the code from above because it is already horribly messy. 270 * Trying to refactor to nicely remove the duplication doesn't seem 271 * feasible. The better fix is to move all users of this driver to 272 * driver model. 273 */ 274 baud_divisor = calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 275 CONFIG_BAUDRATE); 276 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 277 serial_dout(&com_port->mcr, UART_MCRVAL); 278 serial_dout(&com_port->fcr, UART_FCRVAL); 279 280 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 281 serial_dout(&com_port->dll, baud_divisor & 0xff); 282 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 283 serial_dout(&com_port->lcr, UART_LCRVAL); 284 } 285 286 static inline void _debug_uart_putc(int ch) 287 { 288 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 289 290 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 291 ; 292 serial_dout(&com_port->thr, ch); 293 } 294 295 DEBUG_UART_FUNCS 296 297 #endif 298 299 #ifdef CONFIG_DM_SERIAL 300 static int ns16550_serial_putc(struct udevice *dev, const char ch) 301 { 302 struct NS16550 *const com_port = dev_get_priv(dev); 303 304 if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) 305 return -EAGAIN; 306 serial_out(ch, &com_port->thr); 307 308 /* 309 * Call watchdog_reset() upon newline. This is done here in putc 310 * since the environment code uses a single puts() to print the complete 311 * environment upon "printenv". So we can't put this watchdog call 312 * in puts(). 313 */ 314 if (ch == '\n') 315 WATCHDOG_RESET(); 316 317 return 0; 318 } 319 320 static int ns16550_serial_pending(struct udevice *dev, bool input) 321 { 322 struct NS16550 *const com_port = dev_get_priv(dev); 323 324 if (input) 325 return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0; 326 else 327 return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1; 328 } 329 330 static int ns16550_serial_getc(struct udevice *dev) 331 { 332 struct NS16550 *const com_port = dev_get_priv(dev); 333 334 if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) 335 return -EAGAIN; 336 337 return serial_in(&com_port->rbr); 338 } 339 340 static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) 341 { 342 struct NS16550 *const com_port = dev_get_priv(dev); 343 struct ns16550_platdata *plat = com_port->plat; 344 int clock_divisor; 345 346 clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); 347 348 NS16550_setbrg(com_port, clock_divisor); 349 350 return 0; 351 } 352 353 int ns16550_serial_probe(struct udevice *dev) 354 { 355 struct NS16550 *const com_port = dev_get_priv(dev); 356 357 com_port->plat = dev_get_platdata(dev); 358 NS16550_init(com_port, -1); 359 360 return 0; 361 } 362 363 #if CONFIG_IS_ENABLED(OF_CONTROL) 364 int ns16550_serial_ofdata_to_platdata(struct udevice *dev) 365 { 366 struct ns16550_platdata *plat = dev->platdata; 367 fdt_addr_t addr; 368 369 /* try Processor Local Bus device first */ 370 addr = dev_get_addr(dev); 371 #ifdef CONFIG_PCI 372 if (addr == FDT_ADDR_T_NONE) { 373 /* then try pci device */ 374 struct fdt_pci_addr pci_addr; 375 u32 bar; 376 int ret; 377 378 /* we prefer to use a memory-mapped register */ 379 ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset, 380 FDT_PCI_SPACE_MEM32, "reg", 381 &pci_addr); 382 if (ret) { 383 /* try if there is any i/o-mapped register */ 384 ret = fdtdec_get_pci_addr(gd->fdt_blob, 385 dev->of_offset, 386 FDT_PCI_SPACE_IO, 387 "reg", &pci_addr); 388 if (ret) 389 return ret; 390 } 391 392 ret = fdtdec_get_pci_bar32(gd->fdt_blob, dev->of_offset, 393 &pci_addr, &bar); 394 if (ret) 395 return ret; 396 397 addr = bar; 398 } 399 #endif 400 401 if (addr == FDT_ADDR_T_NONE) 402 return -EINVAL; 403 404 plat->base = addr; 405 plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset, 406 "reg-shift", 0); 407 plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, 408 "clock-frequency", 409 CONFIG_SYS_NS16550_CLK); 410 if (!plat->clock) { 411 debug("ns16550 clock not defined\n"); 412 return -EINVAL; 413 } 414 415 return 0; 416 } 417 #endif 418 419 const struct dm_serial_ops ns16550_serial_ops = { 420 .putc = ns16550_serial_putc, 421 .pending = ns16550_serial_pending, 422 .getc = ns16550_serial_getc, 423 .setbrg = ns16550_serial_setbrg, 424 }; 425 426 #if CONFIG_IS_ENABLED(OF_CONTROL) 427 static const struct udevice_id ns16550_serial_ids[] = { 428 { .compatible = "ns16550" }, 429 { .compatible = "ns16550a" }, 430 { .compatible = "nvidia,tegra20-uart" }, 431 { .compatible = "rockchip,rk3036-uart" }, 432 { .compatible = "snps,dw-apb-uart" }, 433 { .compatible = "ti,omap2-uart" }, 434 { .compatible = "ti,omap3-uart" }, 435 { .compatible = "ti,omap4-uart" }, 436 { .compatible = "ti,am3352-uart" }, 437 { .compatible = "ti,am4372-uart" }, 438 { .compatible = "ti,dra742-uart" }, 439 {} 440 }; 441 #endif 442 443 U_BOOT_DRIVER(ns16550_serial) = { 444 .name = "ns16550_serial", 445 .id = UCLASS_SERIAL, 446 #if CONFIG_IS_ENABLED(OF_CONTROL) 447 .of_match = ns16550_serial_ids, 448 .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, 449 .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), 450 #endif 451 .priv_auto_alloc_size = sizeof(struct NS16550), 452 .probe = ns16550_serial_probe, 453 .ops = &ns16550_serial_ops, 454 .flags = DM_FLAG_PRE_RELOC, 455 }; 456 #endif /* CONFIG_DM_SERIAL */ 457