1 /* 2 * COM1 NS16550 support 3 * originally from linux source (arch/powerpc/boot/ns16550.c) 4 * modified to use CONFIG_SYS_ISA_MEM and new defines 5 */ 6 7 #include <common.h> 8 #include <clk.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <fdtdec.h> 12 #include <ns16550.h> 13 #include <serial.h> 14 #include <watchdog.h> 15 #include <linux/types.h> 16 #include <asm/io.h> 17 18 DECLARE_GLOBAL_DATA_PTR; 19 20 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ 21 #define UART_MCRVAL (UART_MCR_DTR | \ 22 UART_MCR_RTS) /* RTS/DTR */ 23 #define UART_FCRVAL (UART_FCR_FIFO_EN | \ 24 UART_FCR_RXSR | \ 25 UART_FCR_TXSR) /* Clear & enable FIFOs */ 26 27 #ifndef CONFIG_DM_SERIAL 28 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 29 #define serial_out(x, y) outb(x, (ulong)y) 30 #define serial_in(y) inb((ulong)y) 31 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) 32 #define serial_out(x, y) out_be32(y, x) 33 #define serial_in(y) in_be32(y) 34 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) 35 #define serial_out(x, y) out_le32(y, x) 36 #define serial_in(y) in_le32(y) 37 #else 38 #define serial_out(x, y) writeb(x, y) 39 #define serial_in(y) readb(y) 40 #endif 41 #endif /* !CONFIG_DM_SERIAL */ 42 43 #if defined(CONFIG_SOC_KEYSTONE) 44 #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 45 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) 46 #undef UART_MCRVAL 47 #ifdef CONFIG_SERIAL_HW_FLOW_CONTROL 48 #define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) 49 #else 50 #define UART_MCRVAL (UART_MCR_RTS) 51 #endif 52 #endif 53 54 #ifndef CONFIG_SYS_NS16550_IER 55 #define CONFIG_SYS_NS16550_IER 0x00 56 #endif /* CONFIG_SYS_NS16550_IER */ 57 58 static inline void serial_out_shift(void *addr, int shift, int value) 59 { 60 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 61 outb(value, (ulong)addr); 62 #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) 63 out_le32(addr, value); 64 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 65 out_be32(addr, value); 66 #elif defined(CONFIG_SYS_NS16550_MEM32) 67 writel(value, addr); 68 #elif defined(CONFIG_SYS_BIG_ENDIAN) 69 writeb(value, addr + (1 << shift) - 1); 70 #else 71 writeb(value, addr); 72 #endif 73 } 74 75 static inline int serial_in_shift(void *addr, int shift) 76 { 77 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 78 return inb((ulong)addr); 79 #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) 80 return in_le32(addr); 81 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 82 return in_be32(addr); 83 #elif defined(CONFIG_SYS_NS16550_MEM32) 84 return readl(addr); 85 #elif defined(CONFIG_SYS_BIG_ENDIAN) 86 return readb(addr + (1 << shift) - 1); 87 #else 88 return readb(addr); 89 #endif 90 } 91 92 #ifdef CONFIG_DM_SERIAL 93 94 #ifndef CONFIG_SYS_NS16550_CLK 95 #define CONFIG_SYS_NS16550_CLK 0 96 #endif 97 98 static void ns16550_writeb(NS16550_t port, int offset, int value) 99 { 100 struct ns16550_platdata *plat = port->plat; 101 unsigned char *addr; 102 103 offset *= 1 << plat->reg_shift; 104 addr = (unsigned char *)plat->base + offset; 105 106 /* 107 * As far as we know it doesn't make sense to support selection of 108 * these options at run-time, so use the existing CONFIG options. 109 */ 110 serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value); 111 } 112 113 static int ns16550_readb(NS16550_t port, int offset) 114 { 115 struct ns16550_platdata *plat = port->plat; 116 unsigned char *addr; 117 118 offset *= 1 << plat->reg_shift; 119 addr = (unsigned char *)plat->base + offset; 120 121 return serial_in_shift(addr + plat->reg_offset, plat->reg_shift); 122 } 123 124 /* We can clean these up once everything is moved to driver model */ 125 #define serial_out(value, addr) \ 126 ns16550_writeb(com_port, \ 127 (unsigned char *)addr - (unsigned char *)com_port, value) 128 #define serial_in(addr) \ 129 ns16550_readb(com_port, \ 130 (unsigned char *)addr - (unsigned char *)com_port) 131 #endif 132 133 int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) 134 { 135 const unsigned int mode_x_div = 16; 136 137 return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); 138 } 139 140 static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) 141 { 142 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); 143 serial_out(baud_divisor & 0xff, &com_port->dll); 144 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 145 serial_out(UART_LCRVAL, &com_port->lcr); 146 } 147 148 void NS16550_init(NS16550_t com_port, int baud_divisor) 149 { 150 #if (defined(CONFIG_SPL_BUILD) && \ 151 (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) 152 /* 153 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode 154 * before SPL starts only THRE bit is set. We have to empty the 155 * transmitter before initialization starts. 156 */ 157 if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) 158 == UART_LSR_THRE) { 159 if (baud_divisor != -1) 160 NS16550_setbrg(com_port, baud_divisor); 161 serial_out(0, &com_port->mdr1); 162 } 163 #endif 164 165 while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) 166 ; 167 168 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 169 #if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \ 170 defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) 171 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ 172 #endif 173 serial_out(UART_MCRVAL, &com_port->mcr); 174 serial_out(UART_FCRVAL, &com_port->fcr); 175 if (baud_divisor != -1) 176 NS16550_setbrg(com_port, baud_divisor); 177 #if defined(CONFIG_OMAP) || \ 178 defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ 179 defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) 180 181 /* /16 is proper to hit 115200 with 48MHz */ 182 serial_out(0, &com_port->mdr1); 183 #endif /* CONFIG_OMAP */ 184 #if defined(CONFIG_SOC_KEYSTONE) 185 serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); 186 #endif 187 } 188 189 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 190 void NS16550_reinit(NS16550_t com_port, int baud_divisor) 191 { 192 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 193 NS16550_setbrg(com_port, 0); 194 serial_out(UART_MCRVAL, &com_port->mcr); 195 serial_out(UART_FCRVAL, &com_port->fcr); 196 NS16550_setbrg(com_port, baud_divisor); 197 } 198 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 199 200 void NS16550_putc(NS16550_t com_port, char c) 201 { 202 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) 203 ; 204 serial_out(c, &com_port->thr); 205 206 /* 207 * Call watchdog_reset() upon newline. This is done here in putc 208 * since the environment code uses a single puts() to print the complete 209 * environment upon "printenv". So we can't put this watchdog call 210 * in puts(). 211 */ 212 if (c == '\n') 213 WATCHDOG_RESET(); 214 } 215 216 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 217 char NS16550_getc(NS16550_t com_port) 218 { 219 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { 220 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) 221 extern void usbtty_poll(void); 222 usbtty_poll(); 223 #endif 224 WATCHDOG_RESET(); 225 } 226 return serial_in(&com_port->rbr); 227 } 228 229 int NS16550_tstc(NS16550_t com_port) 230 { 231 return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; 232 } 233 234 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 235 236 #ifdef CONFIG_DEBUG_UART_NS16550 237 238 #include <debug_uart.h> 239 240 #define serial_dout(reg, value) \ 241 serial_out_shift((char *)com_port + \ 242 ((char *)reg - (char *)com_port) * \ 243 (1 << CONFIG_DEBUG_UART_SHIFT), \ 244 CONFIG_DEBUG_UART_SHIFT, value) 245 #define serial_din(reg) \ 246 serial_in_shift((char *)com_port + \ 247 ((char *)reg - (char *)com_port) * \ 248 (1 << CONFIG_DEBUG_UART_SHIFT), \ 249 CONFIG_DEBUG_UART_SHIFT) 250 251 static inline void _debug_uart_init(void) 252 { 253 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 254 int baud_divisor; 255 256 /* 257 * We copy the code from above because it is already horribly messy. 258 * Trying to refactor to nicely remove the duplication doesn't seem 259 * feasible. The better fix is to move all users of this driver to 260 * driver model. 261 */ 262 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 263 CONFIG_BAUDRATE); 264 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 265 serial_dout(&com_port->mcr, UART_MCRVAL); 266 serial_dout(&com_port->fcr, UART_FCRVAL); 267 268 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 269 serial_dout(&com_port->dll, baud_divisor & 0xff); 270 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 271 serial_dout(&com_port->lcr, UART_LCRVAL); 272 } 273 274 static inline void _debug_uart_putc(int ch) 275 { 276 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 277 278 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 279 ; 280 serial_dout(&com_port->thr, ch); 281 } 282 283 DEBUG_UART_FUNCS 284 285 #endif 286 287 #ifdef CONFIG_DM_SERIAL 288 static int ns16550_serial_putc(struct udevice *dev, const char ch) 289 { 290 struct NS16550 *const com_port = dev_get_priv(dev); 291 292 if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) 293 return -EAGAIN; 294 serial_out(ch, &com_port->thr); 295 296 /* 297 * Call watchdog_reset() upon newline. This is done here in putc 298 * since the environment code uses a single puts() to print the complete 299 * environment upon "printenv". So we can't put this watchdog call 300 * in puts(). 301 */ 302 if (ch == '\n') 303 WATCHDOG_RESET(); 304 305 return 0; 306 } 307 308 static int ns16550_serial_pending(struct udevice *dev, bool input) 309 { 310 struct NS16550 *const com_port = dev_get_priv(dev); 311 312 if (input) 313 return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0; 314 else 315 return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1; 316 } 317 318 static int ns16550_serial_getc(struct udevice *dev) 319 { 320 struct NS16550 *const com_port = dev_get_priv(dev); 321 322 if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) 323 return -EAGAIN; 324 325 return serial_in(&com_port->rbr); 326 } 327 328 static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) 329 { 330 struct NS16550 *const com_port = dev_get_priv(dev); 331 struct ns16550_platdata *plat = com_port->plat; 332 int clock_divisor; 333 334 clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); 335 336 NS16550_setbrg(com_port, clock_divisor); 337 338 return 0; 339 } 340 341 int ns16550_serial_probe(struct udevice *dev) 342 { 343 struct NS16550 *const com_port = dev_get_priv(dev); 344 345 com_port->plat = dev_get_platdata(dev); 346 NS16550_init(com_port, -1); 347 348 return 0; 349 } 350 351 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 352 int ns16550_serial_ofdata_to_platdata(struct udevice *dev) 353 { 354 struct ns16550_platdata *plat = dev->platdata; 355 fdt_addr_t addr; 356 struct clk clk; 357 int err; 358 359 /* try Processor Local Bus device first */ 360 addr = dev_get_addr(dev); 361 #if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) 362 if (addr == FDT_ADDR_T_NONE) { 363 /* then try pci device */ 364 struct fdt_pci_addr pci_addr; 365 u32 bar; 366 int ret; 367 368 /* we prefer to use a memory-mapped register */ 369 ret = fdtdec_get_pci_addr(gd->fdt_blob, dev->of_offset, 370 FDT_PCI_SPACE_MEM32, "reg", 371 &pci_addr); 372 if (ret) { 373 /* try if there is any i/o-mapped register */ 374 ret = fdtdec_get_pci_addr(gd->fdt_blob, 375 dev->of_offset, 376 FDT_PCI_SPACE_IO, 377 "reg", &pci_addr); 378 if (ret) 379 return ret; 380 } 381 382 ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar); 383 if (ret) 384 return ret; 385 386 addr = bar; 387 } 388 #endif 389 390 if (addr == FDT_ADDR_T_NONE) 391 return -EINVAL; 392 393 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 394 plat->base = addr; 395 #else 396 plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); 397 #endif 398 399 plat->reg_offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, 400 "reg-offset", 0); 401 plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset, 402 "reg-shift", 0); 403 404 err = clk_get_by_index(dev, 0, &clk); 405 if (!err) { 406 err = clk_get_rate(&clk); 407 if (!IS_ERR_VALUE(err)) 408 plat->clock = err; 409 } else if (err != -ENODEV && err != -ENOSYS) { 410 debug("ns16550 failed to get clock\n"); 411 return err; 412 } 413 414 if (!plat->clock) 415 plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset, 416 "clock-frequency", 417 CONFIG_SYS_NS16550_CLK); 418 if (!plat->clock) { 419 debug("ns16550 clock not defined\n"); 420 return -EINVAL; 421 } 422 423 return 0; 424 } 425 #endif 426 427 const struct dm_serial_ops ns16550_serial_ops = { 428 .putc = ns16550_serial_putc, 429 .pending = ns16550_serial_pending, 430 .getc = ns16550_serial_getc, 431 .setbrg = ns16550_serial_setbrg, 432 }; 433 434 #if !CONFIG_IS_ENABLED(OF_PLATDATA) 435 #if CONFIG_IS_ENABLED(OF_CONTROL) 436 /* 437 * Please consider existing compatible strings before adding a new 438 * one to keep this table compact. Or you may add a generic "ns16550" 439 * compatible string to your dts. 440 */ 441 static const struct udevice_id ns16550_serial_ids[] = { 442 { .compatible = "ns16550" }, 443 { .compatible = "ns16550a" }, 444 { .compatible = "nvidia,tegra20-uart" }, 445 { .compatible = "snps,dw-apb-uart" }, 446 { .compatible = "ti,omap2-uart" }, 447 { .compatible = "ti,omap3-uart" }, 448 { .compatible = "ti,omap4-uart" }, 449 { .compatible = "ti,am3352-uart" }, 450 { .compatible = "ti,am4372-uart" }, 451 { .compatible = "ti,dra742-uart" }, 452 {} 453 }; 454 #endif 455 456 #if CONFIG_IS_ENABLED(SERIAL_PRESENT) 457 U_BOOT_DRIVER(ns16550_serial) = { 458 .name = "ns16550_serial", 459 .id = UCLASS_SERIAL, 460 #if CONFIG_IS_ENABLED(OF_CONTROL) 461 .of_match = ns16550_serial_ids, 462 .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, 463 .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), 464 #endif 465 .priv_auto_alloc_size = sizeof(struct NS16550), 466 .probe = ns16550_serial_probe, 467 .ops = &ns16550_serial_ops, 468 .flags = DM_FLAG_PRE_RELOC, 469 }; 470 #endif 471 #endif /* !OF_PLATDATA */ 472 #endif /* CONFIG_DM_SERIAL */ 473