1 /* 2 * COM1 NS16550 support 3 * originally from linux source (arch/powerpc/boot/ns16550.c) 4 * modified to use CONFIG_SYS_ISA_MEM and new defines 5 */ 6 7 #include <common.h> 8 #include <clk.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <ns16550.h> 12 #include <serial.h> 13 #include <watchdog.h> 14 #include <linux/types.h> 15 #include <asm/io.h> 16 17 DECLARE_GLOBAL_DATA_PTR; 18 19 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ 20 #define UART_MCRVAL (UART_MCR_DTR | \ 21 UART_MCR_RTS) /* RTS/DTR */ 22 23 #ifndef CONFIG_DM_SERIAL 24 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 25 #define serial_out(x, y) outb(x, (ulong)y) 26 #define serial_in(y) inb((ulong)y) 27 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) 28 #define serial_out(x, y) out_be32(y, x) 29 #define serial_in(y) in_be32(y) 30 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) 31 #define serial_out(x, y) out_le32(y, x) 32 #define serial_in(y) in_le32(y) 33 #else 34 #define serial_out(x, y) writeb(x, y) 35 #define serial_in(y) readb(y) 36 #endif 37 #endif /* !CONFIG_DM_SERIAL */ 38 39 #if defined(CONFIG_SOC_KEYSTONE) 40 #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 41 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) 42 #undef UART_MCRVAL 43 #ifdef CONFIG_SERIAL_HW_FLOW_CONTROL 44 #define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) 45 #else 46 #define UART_MCRVAL (UART_MCR_RTS) 47 #endif 48 #endif 49 50 #ifndef CONFIG_SYS_NS16550_IER 51 #define CONFIG_SYS_NS16550_IER 0x00 52 #endif /* CONFIG_SYS_NS16550_IER */ 53 54 static inline void serial_out_shift(void *addr, int shift, int value) 55 { 56 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 57 outb(value, (ulong)addr); 58 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN) 59 out_le32(addr, value); 60 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 61 out_be32(addr, value); 62 #elif defined(CONFIG_SYS_NS16550_MEM32) 63 writel(value, addr); 64 #elif defined(CONFIG_SYS_BIG_ENDIAN) 65 writeb(value, addr + (1 << shift) - 1); 66 #else 67 writeb(value, addr); 68 #endif 69 } 70 71 static inline int serial_in_shift(void *addr, int shift) 72 { 73 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 74 return inb((ulong)addr); 75 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN) 76 return in_le32(addr); 77 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 78 return in_be32(addr); 79 #elif defined(CONFIG_SYS_NS16550_MEM32) 80 return readl(addr); 81 #elif defined(CONFIG_SYS_BIG_ENDIAN) 82 return readb(addr + (1 << shift) - 1); 83 #else 84 return readb(addr); 85 #endif 86 } 87 88 #ifdef CONFIG_DM_SERIAL 89 90 #ifndef CONFIG_SYS_NS16550_CLK 91 #define CONFIG_SYS_NS16550_CLK 0 92 #endif 93 94 static void ns16550_writeb(NS16550_t port, int offset, int value) 95 { 96 struct ns16550_platdata *plat = port->plat; 97 unsigned char *addr; 98 99 offset *= 1 << plat->reg_shift; 100 addr = (unsigned char *)plat->base + offset; 101 102 /* 103 * As far as we know it doesn't make sense to support selection of 104 * these options at run-time, so use the existing CONFIG options. 105 */ 106 serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value); 107 } 108 109 static int ns16550_readb(NS16550_t port, int offset) 110 { 111 struct ns16550_platdata *plat = port->plat; 112 unsigned char *addr; 113 114 offset *= 1 << plat->reg_shift; 115 addr = (unsigned char *)plat->base + offset; 116 117 return serial_in_shift(addr + plat->reg_offset, plat->reg_shift); 118 } 119 120 static u32 ns16550_getfcr(NS16550_t port) 121 { 122 struct ns16550_platdata *plat = port->plat; 123 124 return plat->fcr; 125 } 126 127 /* We can clean these up once everything is moved to driver model */ 128 #define serial_out(value, addr) \ 129 ns16550_writeb(com_port, \ 130 (unsigned char *)addr - (unsigned char *)com_port, value) 131 #define serial_in(addr) \ 132 ns16550_readb(com_port, \ 133 (unsigned char *)addr - (unsigned char *)com_port) 134 #else 135 static u32 ns16550_getfcr(NS16550_t port) 136 { 137 return UART_FCR_DEFVAL; 138 } 139 #endif 140 141 int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) 142 { 143 const unsigned int mode_x_div = 16; 144 145 return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); 146 } 147 148 static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) 149 { 150 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); 151 serial_out(baud_divisor & 0xff, &com_port->dll); 152 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 153 serial_out(UART_LCRVAL, &com_port->lcr); 154 } 155 156 void NS16550_init(NS16550_t com_port, int baud_divisor) 157 { 158 #if (defined(CONFIG_SPL_BUILD) && \ 159 (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) 160 /* 161 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode 162 * before SPL starts only THRE bit is set. We have to empty the 163 * transmitter before initialization starts. 164 */ 165 if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) 166 == UART_LSR_THRE) { 167 if (baud_divisor != -1) 168 NS16550_setbrg(com_port, baud_divisor); 169 serial_out(0, &com_port->mdr1); 170 } 171 #endif 172 173 while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) 174 ; 175 176 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 177 #if defined(CONFIG_ARCH_OMAP2PLUS) 178 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ 179 #endif 180 serial_out(UART_MCRVAL, &com_port->mcr); 181 serial_out(ns16550_getfcr(com_port), &com_port->fcr); 182 if (baud_divisor != -1) 183 NS16550_setbrg(com_port, baud_divisor); 184 #if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) 185 /* /16 is proper to hit 115200 with 48MHz */ 186 serial_out(0, &com_port->mdr1); 187 #endif 188 #if defined(CONFIG_SOC_KEYSTONE) 189 serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); 190 #endif 191 } 192 193 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 194 void NS16550_reinit(NS16550_t com_port, int baud_divisor) 195 { 196 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 197 NS16550_setbrg(com_port, 0); 198 serial_out(UART_MCRVAL, &com_port->mcr); 199 serial_out(ns16550_getfcr(com_port), &com_port->fcr); 200 NS16550_setbrg(com_port, baud_divisor); 201 } 202 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 203 204 void NS16550_putc(NS16550_t com_port, char c) 205 { 206 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) 207 ; 208 serial_out(c, &com_port->thr); 209 210 /* 211 * Call watchdog_reset() upon newline. This is done here in putc 212 * since the environment code uses a single puts() to print the complete 213 * environment upon "printenv". So we can't put this watchdog call 214 * in puts(). 215 */ 216 if (c == '\n') 217 WATCHDOG_RESET(); 218 } 219 220 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 221 char NS16550_getc(NS16550_t com_port) 222 { 223 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { 224 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) 225 extern void usbtty_poll(void); 226 usbtty_poll(); 227 #endif 228 WATCHDOG_RESET(); 229 } 230 return serial_in(&com_port->rbr); 231 } 232 233 int NS16550_tstc(NS16550_t com_port) 234 { 235 return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; 236 } 237 238 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 239 240 #ifdef CONFIG_DEBUG_UART_NS16550 241 242 #include <debug_uart.h> 243 244 static inline void _debug_uart_init(void) 245 { 246 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 247 int baud_divisor; 248 249 /* 250 * We copy the code from above because it is already horribly messy. 251 * Trying to refactor to nicely remove the duplication doesn't seem 252 * feasible. The better fix is to move all users of this driver to 253 * driver model. 254 */ 255 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 256 CONFIG_BAUDRATE); 257 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 258 serial_dout(&com_port->mcr, UART_MCRVAL); 259 serial_dout(&com_port->fcr, UART_FCR_DEFVAL); 260 261 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 262 serial_dout(&com_port->dll, baud_divisor & 0xff); 263 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 264 serial_dout(&com_port->lcr, UART_LCRVAL); 265 } 266 267 static inline void _debug_uart_putc(int ch) 268 { 269 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 270 271 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 272 ; 273 serial_dout(&com_port->thr, ch); 274 } 275 276 DEBUG_UART_FUNCS 277 278 #endif 279 280 #ifdef CONFIG_DEBUG_UART_OMAP 281 282 #include <debug_uart.h> 283 284 static inline void _debug_uart_init(void) 285 { 286 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 287 int baud_divisor; 288 289 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 290 CONFIG_BAUDRATE); 291 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 292 serial_dout(&com_port->mdr1, 0x7); 293 serial_dout(&com_port->mcr, UART_MCRVAL); 294 serial_dout(&com_port->fcr, UART_FCR_DEFVAL); 295 296 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 297 serial_dout(&com_port->dll, baud_divisor & 0xff); 298 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 299 serial_dout(&com_port->lcr, UART_LCRVAL); 300 serial_dout(&com_port->mdr1, 0x0); 301 } 302 303 static inline void _debug_uart_putc(int ch) 304 { 305 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 306 307 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 308 ; 309 serial_dout(&com_port->thr, ch); 310 } 311 312 DEBUG_UART_FUNCS 313 314 #endif 315 316 #ifdef CONFIG_DM_SERIAL 317 static int ns16550_serial_putc(struct udevice *dev, const char ch) 318 { 319 struct NS16550 *const com_port = dev_get_priv(dev); 320 321 if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) 322 return -EAGAIN; 323 serial_out(ch, &com_port->thr); 324 325 /* 326 * Call watchdog_reset() upon newline. This is done here in putc 327 * since the environment code uses a single puts() to print the complete 328 * environment upon "printenv". So we can't put this watchdog call 329 * in puts(). 330 */ 331 if (ch == '\n') 332 WATCHDOG_RESET(); 333 334 return 0; 335 } 336 337 static int ns16550_serial_pending(struct udevice *dev, bool input) 338 { 339 struct NS16550 *const com_port = dev_get_priv(dev); 340 341 if (input) 342 return (serial_in(&com_port->lsr) & UART_LSR_DR) ? 1 : 0; 343 else 344 return (serial_in(&com_port->lsr) & UART_LSR_THRE) ? 0 : 1; 345 } 346 347 static int ns16550_serial_getc(struct udevice *dev) 348 { 349 struct NS16550 *const com_port = dev_get_priv(dev); 350 351 if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) 352 return -EAGAIN; 353 354 return serial_in(&com_port->rbr); 355 } 356 357 static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) 358 { 359 struct NS16550 *const com_port = dev_get_priv(dev); 360 struct ns16550_platdata *plat = com_port->plat; 361 int clock_divisor; 362 363 clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); 364 365 NS16550_setbrg(com_port, clock_divisor); 366 367 return 0; 368 } 369 370 int ns16550_serial_probe(struct udevice *dev) 371 { 372 struct NS16550 *const com_port = dev_get_priv(dev); 373 374 com_port->plat = dev_get_platdata(dev); 375 NS16550_init(com_port, -1); 376 377 return 0; 378 } 379 380 #if CONFIG_IS_ENABLED(OF_CONTROL) 381 enum { 382 PORT_NS16550 = 0, 383 PORT_JZ4780, 384 }; 385 #endif 386 387 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 388 int ns16550_serial_ofdata_to_platdata(struct udevice *dev) 389 { 390 struct ns16550_platdata *plat = dev->platdata; 391 const u32 port_type = dev_get_driver_data(dev); 392 fdt_addr_t addr; 393 struct clk clk; 394 int err; 395 396 /* try Processor Local Bus device first */ 397 addr = dev_read_addr(dev); 398 #if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) 399 if (addr == FDT_ADDR_T_NONE) { 400 /* then try pci device */ 401 struct fdt_pci_addr pci_addr; 402 u32 bar; 403 int ret; 404 405 /* we prefer to use a memory-mapped register */ 406 ret = fdtdec_get_pci_addr(gd->fdt_blob, dev_of_offset(dev), 407 FDT_PCI_SPACE_MEM32, "reg", 408 &pci_addr); 409 if (ret) { 410 /* try if there is any i/o-mapped register */ 411 ret = fdtdec_get_pci_addr(gd->fdt_blob, 412 dev_of_offset(dev), 413 FDT_PCI_SPACE_IO, 414 "reg", &pci_addr); 415 if (ret) 416 return ret; 417 } 418 419 ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar); 420 if (ret) 421 return ret; 422 423 addr = bar; 424 } 425 #endif 426 427 if (addr == FDT_ADDR_T_NONE) 428 return -EINVAL; 429 430 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 431 plat->base = addr; 432 #else 433 plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); 434 #endif 435 436 plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0); 437 plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0); 438 439 err = clk_get_by_index(dev, 0, &clk); 440 if (!err) { 441 err = clk_get_rate(&clk); 442 if (!IS_ERR_VALUE(err)) 443 plat->clock = err; 444 } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) { 445 debug("ns16550 failed to get clock\n"); 446 return err; 447 } 448 449 if (!plat->clock) 450 plat->clock = dev_read_u32_default(dev, "clock-frequency", 451 CONFIG_SYS_NS16550_CLK); 452 if (!plat->clock) { 453 debug("ns16550 clock not defined\n"); 454 return -EINVAL; 455 } 456 457 plat->fcr = UART_FCR_DEFVAL; 458 if (port_type == PORT_JZ4780) 459 plat->fcr |= UART_FCR_UME; 460 461 return 0; 462 } 463 #endif 464 465 const struct dm_serial_ops ns16550_serial_ops = { 466 .putc = ns16550_serial_putc, 467 .pending = ns16550_serial_pending, 468 .getc = ns16550_serial_getc, 469 .setbrg = ns16550_serial_setbrg, 470 }; 471 472 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 473 /* 474 * Please consider existing compatible strings before adding a new 475 * one to keep this table compact. Or you may add a generic "ns16550" 476 * compatible string to your dts. 477 */ 478 static const struct udevice_id ns16550_serial_ids[] = { 479 { .compatible = "ns16550", .data = PORT_NS16550 }, 480 { .compatible = "ns16550a", .data = PORT_NS16550 }, 481 { .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 }, 482 { .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 }, 483 { .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 }, 484 { .compatible = "ti,omap2-uart", .data = PORT_NS16550 }, 485 { .compatible = "ti,omap3-uart", .data = PORT_NS16550 }, 486 { .compatible = "ti,omap4-uart", .data = PORT_NS16550 }, 487 { .compatible = "ti,am3352-uart", .data = PORT_NS16550 }, 488 { .compatible = "ti,am4372-uart", .data = PORT_NS16550 }, 489 { .compatible = "ti,dra742-uart", .data = PORT_NS16550 }, 490 {} 491 }; 492 #endif /* OF_CONTROL && !OF_PLATDATA */ 493 494 #if CONFIG_IS_ENABLED(SERIAL_PRESENT) 495 496 /* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */ 497 #if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL) 498 U_BOOT_DRIVER(ns16550_serial) = { 499 .name = "ns16550_serial", 500 .id = UCLASS_SERIAL, 501 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 502 .of_match = ns16550_serial_ids, 503 .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, 504 .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), 505 #endif 506 .priv_auto_alloc_size = sizeof(struct NS16550), 507 .probe = ns16550_serial_probe, 508 .ops = &ns16550_serial_ops, 509 .flags = DM_FLAG_PRE_RELOC, 510 }; 511 #endif 512 #endif /* SERIAL_PRESENT */ 513 514 #endif /* CONFIG_DM_SERIAL */ 515