1 /* 2 * COM1 NS16550 support 3 * originally from linux source (arch/powerpc/boot/ns16550.c) 4 * modified to use CONFIG_SYS_ISA_MEM and new defines 5 */ 6 7 #include <config.h> 8 #include <ns16550.h> 9 #include <watchdog.h> 10 #include <linux/types.h> 11 #include <asm/io.h> 12 13 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ 14 #define UART_MCRVAL (UART_MCR_DTR | \ 15 UART_MCR_RTS) /* RTS/DTR */ 16 #define UART_FCRVAL (UART_FCR_FIFO_EN | \ 17 UART_FCR_RXSR | \ 18 UART_FCR_TXSR) /* Clear & enable FIFOs */ 19 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 20 #define serial_out(x, y) outb(x, (ulong)y) 21 #define serial_in(y) inb((ulong)y) 22 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) 23 #define serial_out(x, y) out_be32(y, x) 24 #define serial_in(y) in_be32(y) 25 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) 26 #define serial_out(x, y) out_le32(y, x) 27 #define serial_in(y) in_le32(y) 28 #else 29 #define serial_out(x, y) writeb(x, y) 30 #define serial_in(y) readb(y) 31 #endif 32 33 #ifndef CONFIG_SYS_NS16550_IER 34 #define CONFIG_SYS_NS16550_IER 0x00 35 #endif /* CONFIG_SYS_NS16550_IER */ 36 37 void NS16550_init(NS16550_t com_port, int baud_divisor) 38 { 39 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 40 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2) 41 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ 42 #endif 43 serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr); 44 serial_out(0, &com_port->dll); 45 serial_out(0, &com_port->dlm); 46 serial_out(UART_LCRVAL, &com_port->lcr); 47 serial_out(UART_MCRVAL, &com_port->mcr); 48 serial_out(UART_FCRVAL, &com_port->fcr); 49 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); 50 serial_out(baud_divisor & 0xff, &com_port->dll); 51 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 52 serial_out(UART_LCRVAL, &com_port->lcr); 53 #if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2) 54 #if defined(CONFIG_APTIX) 55 /* /13 mode so Aptix 6MHz can hit 115200 */ 56 serial_out(3, &com_port->mdr1); 57 #else 58 /* /16 is proper to hit 115200 with 48MHz */ 59 serial_out(0, &com_port->mdr1); 60 #endif 61 #endif /* CONFIG_OMAP */ 62 } 63 64 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 65 void NS16550_reinit(NS16550_t com_port, int baud_divisor) 66 { 67 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 68 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); 69 serial_out(0, &com_port->dll); 70 serial_out(0, &com_port->dlm); 71 serial_out(UART_LCRVAL, &com_port->lcr); 72 serial_out(UART_MCRVAL, &com_port->mcr); 73 serial_out(UART_FCRVAL, &com_port->fcr); 74 serial_out(UART_LCR_BKSE, &com_port->lcr); 75 serial_out(baud_divisor & 0xff, &com_port->dll); 76 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 77 serial_out(UART_LCRVAL, &com_port->lcr); 78 } 79 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 80 81 void NS16550_putc(NS16550_t com_port, char c) 82 { 83 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) 84 ; 85 serial_out(c, &com_port->thr); 86 87 /* 88 * Call watchdog_reset() upon newline. This is done here in putc 89 * since the environment code uses a single puts() to print the complete 90 * environment upon "printenv". So we can't put this watchdog call 91 * in puts(). 92 */ 93 if (c == '\n') 94 WATCHDOG_RESET(); 95 } 96 97 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 98 char NS16550_getc(NS16550_t com_port) 99 { 100 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { 101 #ifdef CONFIG_USB_TTY 102 extern void usbtty_poll(void); 103 usbtty_poll(); 104 #endif 105 WATCHDOG_RESET(); 106 } 107 return serial_in(&com_port->rbr); 108 } 109 110 int NS16550_tstc(NS16550_t com_port) 111 { 112 return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; 113 } 114 115 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 116