1 /* 2 * COM1 NS16550 support 3 * originally from linux source (arch/powerpc/boot/ns16550.c) 4 * modified to use CONFIG_SYS_ISA_MEM and new defines 5 */ 6 7 #include <common.h> 8 #include <clk.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <ns16550.h> 12 #include <reset.h> 13 #include <serial.h> 14 #include <watchdog.h> 15 #include <linux/types.h> 16 #include <asm/io.h> 17 18 DECLARE_GLOBAL_DATA_PTR; 19 20 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ 21 #define UART_MCRVAL (UART_MCR_DTR | \ 22 UART_MCR_RTS) /* RTS/DTR */ 23 24 #ifndef CONFIG_DM_SERIAL 25 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 26 #define serial_out(x, y) outb(x, (ulong)y) 27 #define serial_in(y) inb((ulong)y) 28 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) 29 #define serial_out(x, y) out_be32(y, x) 30 #define serial_in(y) in_be32(y) 31 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) 32 #define serial_out(x, y) out_le32(y, x) 33 #define serial_in(y) in_le32(y) 34 #else 35 #define serial_out(x, y) writeb(x, y) 36 #define serial_in(y) readb(y) 37 #endif 38 #endif /* !CONFIG_DM_SERIAL */ 39 40 #if defined(CONFIG_SOC_KEYSTONE) 41 #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 42 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) 43 #undef UART_MCRVAL 44 #ifdef CONFIG_SERIAL_HW_FLOW_CONTROL 45 #define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) 46 #else 47 #define UART_MCRVAL (UART_MCR_RTS) 48 #endif 49 #endif 50 51 #ifndef CONFIG_SYS_NS16550_IER 52 #define CONFIG_SYS_NS16550_IER 0x00 53 #endif /* CONFIG_SYS_NS16550_IER */ 54 55 static inline void serial_out_shift(void *addr, int shift, int value) 56 { 57 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 58 outb(value, (ulong)addr); 59 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN) 60 out_le32(addr, value); 61 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 62 out_be32(addr, value); 63 #elif defined(CONFIG_SYS_NS16550_MEM32) 64 writel(value, addr); 65 #elif defined(CONFIG_SYS_BIG_ENDIAN) 66 writeb(value, addr + (1 << shift) - 1); 67 #else 68 writeb(value, addr); 69 #endif 70 } 71 72 static inline int serial_in_shift(void *addr, int shift) 73 { 74 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 75 return inb((ulong)addr); 76 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN) 77 return in_le32(addr); 78 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 79 return in_be32(addr); 80 #elif defined(CONFIG_SYS_NS16550_MEM32) 81 return readl(addr); 82 #elif defined(CONFIG_SYS_BIG_ENDIAN) 83 return readb(addr + (1 << shift) - 1); 84 #else 85 return readb(addr); 86 #endif 87 } 88 89 #ifdef CONFIG_DM_SERIAL 90 91 #ifndef CONFIG_SYS_NS16550_CLK 92 #define CONFIG_SYS_NS16550_CLK 0 93 #endif 94 95 static void ns16550_writeb(NS16550_t port, int offset, int value) 96 { 97 struct ns16550_platdata *plat = port->plat; 98 unsigned char *addr; 99 100 offset *= 1 << plat->reg_shift; 101 addr = (unsigned char *)plat->base + offset; 102 103 /* 104 * As far as we know it doesn't make sense to support selection of 105 * these options at run-time, so use the existing CONFIG options. 106 */ 107 serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value); 108 } 109 110 static int ns16550_readb(NS16550_t port, int offset) 111 { 112 struct ns16550_platdata *plat = port->plat; 113 unsigned char *addr; 114 115 offset *= 1 << plat->reg_shift; 116 addr = (unsigned char *)plat->base + offset; 117 118 return serial_in_shift(addr + plat->reg_offset, plat->reg_shift); 119 } 120 121 static u32 ns16550_getfcr(NS16550_t port) 122 { 123 struct ns16550_platdata *plat = port->plat; 124 125 return plat->fcr; 126 } 127 128 /* We can clean these up once everything is moved to driver model */ 129 #define serial_out(value, addr) \ 130 ns16550_writeb(com_port, \ 131 (unsigned char *)addr - (unsigned char *)com_port, value) 132 #define serial_in(addr) \ 133 ns16550_readb(com_port, \ 134 (unsigned char *)addr - (unsigned char *)com_port) 135 #else 136 static u32 ns16550_getfcr(NS16550_t port) 137 { 138 return UART_FCR_DEFVAL; 139 } 140 #endif 141 142 int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) 143 { 144 const unsigned int mode_x_div = 16; 145 146 return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); 147 } 148 149 static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) 150 { 151 /* to keep serial format, read lcr before writing BKSE */ 152 int lcr_val = serial_in(&com_port->lcr) & ~UART_LCR_BKSE; 153 154 serial_out(UART_LCR_BKSE | lcr_val, &com_port->lcr); 155 serial_out(baud_divisor & 0xff, &com_port->dll); 156 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 157 serial_out(lcr_val, &com_port->lcr); 158 } 159 160 void NS16550_init(NS16550_t com_port, int baud_divisor) 161 { 162 #if (defined(CONFIG_SPL_BUILD) && \ 163 (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) 164 /* 165 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode 166 * before SPL starts only THRE bit is set. We have to empty the 167 * transmitter before initialization starts. 168 */ 169 if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) 170 == UART_LSR_THRE) { 171 if (baud_divisor != -1) 172 NS16550_setbrg(com_port, baud_divisor); 173 serial_out(0, &com_port->mdr1); 174 } 175 #endif 176 177 while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) 178 ; 179 180 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 181 #if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_OMAP_SERIAL) 182 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ 183 #endif 184 185 serial_out(UART_MCRVAL, &com_port->mcr); 186 serial_out(ns16550_getfcr(com_port), &com_port->fcr); 187 /* initialize serial config to 8N1 before writing baudrate */ 188 serial_out(UART_LCRVAL, &com_port->lcr); 189 if (baud_divisor != -1) 190 NS16550_setbrg(com_port, baud_divisor); 191 #if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \ 192 defined(CONFIG_OMAP_SERIAL) 193 /* /16 is proper to hit 115200 with 48MHz */ 194 serial_out(0, &com_port->mdr1); 195 #endif 196 #if defined(CONFIG_SOC_KEYSTONE) 197 serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); 198 #endif 199 } 200 201 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 202 void NS16550_reinit(NS16550_t com_port, int baud_divisor) 203 { 204 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 205 NS16550_setbrg(com_port, 0); 206 serial_out(UART_MCRVAL, &com_port->mcr); 207 serial_out(ns16550_getfcr(com_port), &com_port->fcr); 208 NS16550_setbrg(com_port, baud_divisor); 209 } 210 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 211 212 void NS16550_putc(NS16550_t com_port, char c) 213 { 214 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) 215 ; 216 serial_out(c, &com_port->thr); 217 218 /* 219 * Call watchdog_reset() upon newline. This is done here in putc 220 * since the environment code uses a single puts() to print the complete 221 * environment upon "printenv". So we can't put this watchdog call 222 * in puts(). 223 */ 224 if (c == '\n') 225 WATCHDOG_RESET(); 226 } 227 228 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 229 char NS16550_getc(NS16550_t com_port) 230 { 231 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { 232 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) 233 extern void usbtty_poll(void); 234 usbtty_poll(); 235 #endif 236 WATCHDOG_RESET(); 237 } 238 return serial_in(&com_port->rbr); 239 } 240 241 int NS16550_tstc(NS16550_t com_port) 242 { 243 return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; 244 } 245 246 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 247 248 #ifdef CONFIG_DEBUG_UART_NS16550 249 250 #include <debug_uart.h> 251 252 static inline void _debug_uart_init(void) 253 { 254 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 255 int baud_divisor; 256 257 /* 258 * We copy the code from above because it is already horribly messy. 259 * Trying to refactor to nicely remove the duplication doesn't seem 260 * feasible. The better fix is to move all users of this driver to 261 * driver model. 262 */ 263 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 264 CONFIG_BAUDRATE); 265 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 266 serial_dout(&com_port->mcr, UART_MCRVAL); 267 serial_dout(&com_port->fcr, UART_FCR_DEFVAL); 268 269 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 270 serial_dout(&com_port->dll, baud_divisor & 0xff); 271 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 272 serial_dout(&com_port->lcr, UART_LCRVAL); 273 } 274 275 static inline void _debug_uart_putc(int ch) 276 { 277 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 278 279 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 280 ; 281 serial_dout(&com_port->thr, ch); 282 } 283 284 DEBUG_UART_FUNCS 285 286 #endif 287 288 #ifdef CONFIG_DM_SERIAL 289 static int ns16550_serial_putc(struct udevice *dev, const char ch) 290 { 291 struct NS16550 *const com_port = dev_get_priv(dev); 292 293 if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) 294 return -EAGAIN; 295 serial_out(ch, &com_port->thr); 296 297 /* 298 * Call watchdog_reset() upon newline. This is done here in putc 299 * since the environment code uses a single puts() to print the complete 300 * environment upon "printenv". So we can't put this watchdog call 301 * in puts(). 302 */ 303 if (ch == '\n') 304 WATCHDOG_RESET(); 305 306 return 0; 307 } 308 309 static int ns16550_serial_pending(struct udevice *dev, bool input) 310 { 311 struct NS16550 *const com_port = dev_get_priv(dev); 312 313 if (input) 314 return (serial_in(&com_port->lsr) & UART_LSR_DR) ? 1 : 0; 315 else 316 return (serial_in(&com_port->lsr) & UART_LSR_THRE) ? 0 : 1; 317 } 318 319 static int ns16550_serial_getc(struct udevice *dev) 320 { 321 struct NS16550 *const com_port = dev_get_priv(dev); 322 323 if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) 324 return -EAGAIN; 325 326 return serial_in(&com_port->rbr); 327 } 328 329 static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) 330 { 331 struct NS16550 *const com_port = dev_get_priv(dev); 332 struct ns16550_platdata *plat = com_port->plat; 333 int clock_divisor; 334 335 clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); 336 337 NS16550_setbrg(com_port, clock_divisor); 338 339 return 0; 340 } 341 342 static int ns16550_serial_setconfig(struct udevice *dev, uint serial_config) 343 { 344 struct NS16550 *const com_port = dev_get_priv(dev); 345 int lcr_val = UART_LCR_WLS_8; 346 uint parity = SERIAL_GET_PARITY(serial_config); 347 uint bits = SERIAL_GET_BITS(serial_config); 348 uint stop = SERIAL_GET_STOP(serial_config); 349 350 /* 351 * only parity config is implemented, check if other serial settings 352 * are the default one. 353 */ 354 if (bits != SERIAL_8_BITS || stop != SERIAL_ONE_STOP) 355 return -ENOTSUPP; /* not supported in driver*/ 356 357 switch (parity) { 358 case SERIAL_PAR_NONE: 359 /* no bits to add */ 360 break; 361 case SERIAL_PAR_ODD: 362 lcr_val |= UART_LCR_PEN; 363 break; 364 case SERIAL_PAR_EVEN: 365 lcr_val |= UART_LCR_PEN | UART_LCR_EPS; 366 break; 367 default: 368 return -ENOTSUPP; /* not supported in driver*/ 369 } 370 371 serial_out(lcr_val, &com_port->lcr); 372 return 0; 373 } 374 375 static int ns16550_serial_getinfo(struct udevice *dev, 376 struct serial_device_info *info) 377 { 378 struct NS16550 *const com_port = dev_get_priv(dev); 379 struct ns16550_platdata *plat = com_port->plat; 380 381 info->type = SERIAL_CHIP_16550_COMPATIBLE; 382 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 383 info->addr_space = SERIAL_ADDRESS_SPACE_IO; 384 #else 385 info->addr_space = SERIAL_ADDRESS_SPACE_MEMORY; 386 #endif 387 info->addr = plat->base; 388 info->reg_width = plat->reg_width; 389 info->reg_shift = plat->reg_shift; 390 info->reg_offset = plat->reg_offset; 391 return 0; 392 } 393 394 int ns16550_serial_probe(struct udevice *dev) 395 { 396 struct NS16550 *const com_port = dev_get_priv(dev); 397 struct reset_ctl_bulk reset_bulk; 398 int ret; 399 400 ret = reset_get_bulk(dev, &reset_bulk); 401 if (!ret) 402 reset_deassert_bulk(&reset_bulk); 403 404 com_port->plat = dev_get_platdata(dev); 405 NS16550_init(com_port, -1); 406 407 return 0; 408 } 409 410 #if CONFIG_IS_ENABLED(OF_CONTROL) 411 enum { 412 PORT_NS16550 = 0, 413 PORT_JZ4780, 414 }; 415 #endif 416 417 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 418 int ns16550_serial_ofdata_to_platdata(struct udevice *dev) 419 { 420 struct ns16550_platdata *plat = dev->platdata; 421 const u32 port_type = dev_get_driver_data(dev); 422 fdt_addr_t addr; 423 struct clk clk; 424 int err; 425 426 /* try Processor Local Bus device first */ 427 addr = dev_read_addr(dev); 428 #if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) 429 if (addr == FDT_ADDR_T_NONE) { 430 /* then try pci device */ 431 struct fdt_pci_addr pci_addr; 432 u32 bar; 433 int ret; 434 435 /* we prefer to use a memory-mapped register */ 436 ret = fdtdec_get_pci_addr(gd->fdt_blob, dev_of_offset(dev), 437 FDT_PCI_SPACE_MEM32, "reg", 438 &pci_addr); 439 if (ret) { 440 /* try if there is any i/o-mapped register */ 441 ret = fdtdec_get_pci_addr(gd->fdt_blob, 442 dev_of_offset(dev), 443 FDT_PCI_SPACE_IO, 444 "reg", &pci_addr); 445 if (ret) 446 return ret; 447 } 448 449 ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar); 450 if (ret) 451 return ret; 452 453 addr = bar; 454 } 455 #endif 456 457 if (addr == FDT_ADDR_T_NONE) 458 return -EINVAL; 459 460 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 461 plat->base = addr; 462 #else 463 plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); 464 #endif 465 466 plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0); 467 plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0); 468 plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1); 469 470 err = clk_get_by_index(dev, 0, &clk); 471 if (!err) { 472 err = clk_get_rate(&clk); 473 if (!IS_ERR_VALUE(err)) 474 plat->clock = err; 475 } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) { 476 debug("ns16550 failed to get clock\n"); 477 return err; 478 } 479 480 if (!plat->clock) 481 plat->clock = dev_read_u32_default(dev, "clock-frequency", 482 CONFIG_SYS_NS16550_CLK); 483 if (!plat->clock) { 484 debug("ns16550 clock not defined\n"); 485 return -EINVAL; 486 } 487 488 plat->fcr = UART_FCR_DEFVAL; 489 if (port_type == PORT_JZ4780) 490 plat->fcr |= UART_FCR_UME; 491 492 return 0; 493 } 494 #endif 495 496 const struct dm_serial_ops ns16550_serial_ops = { 497 .putc = ns16550_serial_putc, 498 .pending = ns16550_serial_pending, 499 .getc = ns16550_serial_getc, 500 .setbrg = ns16550_serial_setbrg, 501 .setconfig = ns16550_serial_setconfig, 502 .getinfo = ns16550_serial_getinfo, 503 }; 504 505 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 506 /* 507 * Please consider existing compatible strings before adding a new 508 * one to keep this table compact. Or you may add a generic "ns16550" 509 * compatible string to your dts. 510 */ 511 static const struct udevice_id ns16550_serial_ids[] = { 512 { .compatible = "ns16550", .data = PORT_NS16550 }, 513 { .compatible = "ns16550a", .data = PORT_NS16550 }, 514 { .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 }, 515 { .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 }, 516 { .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 }, 517 {} 518 }; 519 #endif /* OF_CONTROL && !OF_PLATDATA */ 520 521 #if CONFIG_IS_ENABLED(SERIAL_PRESENT) 522 523 /* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */ 524 #if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL) 525 U_BOOT_DRIVER(ns16550_serial) = { 526 .name = "ns16550_serial", 527 .id = UCLASS_SERIAL, 528 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 529 .of_match = ns16550_serial_ids, 530 .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, 531 .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), 532 #endif 533 .priv_auto_alloc_size = sizeof(struct NS16550), 534 .probe = ns16550_serial_probe, 535 .ops = &ns16550_serial_ops, 536 #if !CONFIG_IS_ENABLED(OF_CONTROL) 537 .flags = DM_FLAG_PRE_RELOC, 538 #endif 539 }; 540 #endif 541 #endif /* SERIAL_PRESENT */ 542 543 #endif /* CONFIG_DM_SERIAL */ 544