1 /* 2 * (C) Copyright 2004-2007 Freescale Semiconductor, Inc. 3 * TsiChung Liew, Tsi-Chung.Liew@freescale.com. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 * 23 */ 24 25 /* 26 * Minimal serial functions needed to use one of the uart ports 27 * as serial console interface. 28 */ 29 30 #include <common.h> 31 32 #ifdef CONFIG_MCFUART 33 34 #include <asm/immap.h> 35 #include <asm/uart.h> 36 37 DECLARE_GLOBAL_DATA_PTR; 38 39 extern void uart_port_conf(void); 40 41 int serial_init(void) 42 { 43 volatile uart_t *uart; 44 u32 counter; 45 46 uart = (volatile uart_t *)(CFG_UART_BASE); 47 48 uart_port_conf(); 49 50 /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ 51 uart->ucr = UART_UCR_RESET_RX; 52 uart->ucr = UART_UCR_RESET_TX; 53 uart->ucr = UART_UCR_RESET_ERROR; 54 uart->ucr = UART_UCR_RESET_MR; 55 __asm__("nop"); 56 57 uart->uimr = 0; 58 59 /* write to CSR: RX/TX baud rate from timers */ 60 uart->ucsr = (UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK); 61 62 uart->umr = (UART_UMR_BC_8 | UART_UMR_PM_NONE); 63 uart->umr = UART_UMR_SB_STOP_BITS_1; 64 65 /* Setting up BaudRate */ 66 counter = (u32) (gd->bus_clk / (gd->baudrate)); 67 counter >>= 5; 68 69 /* write to CTUR: divide counter upper byte */ 70 uart->ubg1 = (u8) ((counter & 0xff00) >> 8); 71 /* write to CTLR: divide counter lower byte */ 72 uart->ubg2 = (u8) (counter & 0x00ff); 73 74 uart->ucr = (UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED); 75 76 return (0); 77 } 78 79 void serial_putc(const char c) 80 { 81 volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); 82 83 if (c == '\n') 84 serial_putc('\r'); 85 86 /* Wait for last character to go. */ 87 while (!(uart->usr & UART_USR_TXRDY)) ; 88 89 uart->utb = c; 90 } 91 92 void serial_puts(const char *s) 93 { 94 while (*s) { 95 serial_putc(*s++); 96 } 97 } 98 99 int serial_getc(void) 100 { 101 volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); 102 103 /* Wait for a character to arrive. */ 104 while (!(uart->usr & UART_USR_RXRDY)) ; 105 return uart->urb; 106 } 107 108 int serial_tstc(void) 109 { 110 volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); 111 112 return (uart->usr & UART_USR_RXRDY); 113 } 114 115 void serial_setbrg(void) 116 { 117 volatile uart_t *uart = (volatile uart_t *)(CFG_UART_BASE); 118 u32 counter; 119 120 counter = ((gd->bus_clk / gd->baudrate)) >> 5; 121 counter++; 122 123 /* write to CTUR: divide counter upper byte */ 124 uart->ubg1 = ((counter & 0xff00) >> 8); 125 /* write to CTLR: divide counter lower byte */ 126 uart->ubg2 = (counter & 0x00ff); 127 128 uart->ucr = UART_UCR_RESET_RX; 129 uart->ucr = UART_UCR_RESET_TX; 130 131 uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; 132 } 133 #endif /* CONFIG_MCFUART */ 134