1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2004-2006 Atmel Corporation 4 * 5 * Modified to support C structur SoC access by 6 * Andreas Bießmann <biessmann@corscience.de> 7 */ 8 #include <common.h> 9 #include <clk.h> 10 #include <dm.h> 11 #include <errno.h> 12 #include <watchdog.h> 13 #include <serial.h> 14 #include <debug_uart.h> 15 #include <linux/compiler.h> 16 17 #include <asm/io.h> 18 #ifdef CONFIG_DM_SERIAL 19 #include <asm/arch/atmel_serial.h> 20 #endif 21 #include <asm/arch/clk.h> 22 #include <asm/arch/hardware.h> 23 24 #include "atmel_usart.h" 25 26 DECLARE_GLOBAL_DATA_PTR; 27 28 #ifndef CONFIG_DM_SERIAL 29 static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id, 30 int baudrate) 31 { 32 unsigned long divisor; 33 unsigned long usart_hz; 34 35 /* 36 * Master Clock 37 * Baud Rate = -------------- 38 * 16 * CD 39 */ 40 usart_hz = get_usart_clk_rate(id); 41 divisor = (usart_hz / 16 + baudrate / 2) / baudrate; 42 writel(USART3_BF(CD, divisor), &usart->brgr); 43 } 44 45 static void atmel_serial_init_internal(atmel_usart3_t *usart) 46 { 47 /* 48 * Just in case: drain transmitter register 49 * 1000us is enough for baudrate >= 9600 50 */ 51 if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY))) 52 __udelay(1000); 53 54 writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); 55 } 56 57 static void atmel_serial_activate(atmel_usart3_t *usart) 58 { 59 writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) 60 | USART3_BF(USCLKS, USART3_USCLKS_MCK) 61 | USART3_BF(CHRL, USART3_CHRL_8) 62 | USART3_BF(PAR, USART3_PAR_NONE) 63 | USART3_BF(NBSTOP, USART3_NBSTOP_1)), 64 &usart->mr); 65 writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); 66 /* 100us is enough for the new settings to be settled */ 67 __udelay(100); 68 } 69 70 static void atmel_serial_setbrg(void) 71 { 72 atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE, 73 CONFIG_USART_ID, gd->baudrate); 74 } 75 76 static int atmel_serial_init(void) 77 { 78 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 79 80 atmel_serial_init_internal(usart); 81 serial_setbrg(); 82 atmel_serial_activate(usart); 83 84 return 0; 85 } 86 87 static void atmel_serial_putc(char c) 88 { 89 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 90 91 if (c == '\n') 92 serial_putc('\r'); 93 94 while (!(readl(&usart->csr) & USART3_BIT(TXRDY))); 95 writel(c, &usart->thr); 96 } 97 98 static int atmel_serial_getc(void) 99 { 100 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 101 102 while (!(readl(&usart->csr) & USART3_BIT(RXRDY))) 103 WATCHDOG_RESET(); 104 return readl(&usart->rhr); 105 } 106 107 static int atmel_serial_tstc(void) 108 { 109 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 110 return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0; 111 } 112 113 static struct serial_device atmel_serial_drv = { 114 .name = "atmel_serial", 115 .start = atmel_serial_init, 116 .stop = NULL, 117 .setbrg = atmel_serial_setbrg, 118 .putc = atmel_serial_putc, 119 .puts = default_serial_puts, 120 .getc = atmel_serial_getc, 121 .tstc = atmel_serial_tstc, 122 }; 123 124 void atmel_serial_initialize(void) 125 { 126 serial_register(&atmel_serial_drv); 127 } 128 129 __weak struct serial_device *default_serial_console(void) 130 { 131 return &atmel_serial_drv; 132 } 133 #endif 134 135 #ifdef CONFIG_DM_SERIAL 136 enum serial_clk_type { 137 CLK_TYPE_NORMAL = 0, 138 CLK_TYPE_DBGU, 139 }; 140 141 struct atmel_serial_priv { 142 atmel_usart3_t *usart; 143 ulong usart_clk_rate; 144 }; 145 146 static void _atmel_serial_set_brg(atmel_usart3_t *usart, 147 ulong usart_clk_rate, int baudrate) 148 { 149 unsigned long divisor; 150 151 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; 152 writel(USART3_BF(CD, divisor), &usart->brgr); 153 } 154 155 void _atmel_serial_init(atmel_usart3_t *usart, 156 ulong usart_clk_rate, int baudrate) 157 { 158 writel(USART3_BIT(RXDIS) | USART3_BIT(TXDIS), &usart->cr); 159 160 writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) | 161 USART3_BF(USCLKS, USART3_USCLKS_MCK) | 162 USART3_BF(CHRL, USART3_CHRL_8) | 163 USART3_BF(PAR, USART3_PAR_NONE) | 164 USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr); 165 166 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); 167 168 writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); 169 writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); 170 } 171 172 int atmel_serial_setbrg(struct udevice *dev, int baudrate) 173 { 174 struct atmel_serial_priv *priv = dev_get_priv(dev); 175 176 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); 177 178 return 0; 179 } 180 181 static int atmel_serial_getc(struct udevice *dev) 182 { 183 struct atmel_serial_priv *priv = dev_get_priv(dev); 184 185 if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY))) 186 return -EAGAIN; 187 188 return readl(&priv->usart->rhr); 189 } 190 191 static int atmel_serial_putc(struct udevice *dev, const char ch) 192 { 193 struct atmel_serial_priv *priv = dev_get_priv(dev); 194 195 if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY))) 196 return -EAGAIN; 197 198 writel(ch, &priv->usart->thr); 199 200 return 0; 201 } 202 203 static int atmel_serial_pending(struct udevice *dev, bool input) 204 { 205 struct atmel_serial_priv *priv = dev_get_priv(dev); 206 uint32_t csr = readl(&priv->usart->csr); 207 208 if (input) 209 return csr & USART3_BIT(RXRDY) ? 1 : 0; 210 else 211 return csr & USART3_BIT(TXEMPTY) ? 0 : 1; 212 } 213 214 static const struct dm_serial_ops atmel_serial_ops = { 215 .putc = atmel_serial_putc, 216 .pending = atmel_serial_pending, 217 .getc = atmel_serial_getc, 218 .setbrg = atmel_serial_setbrg, 219 }; 220 221 static int atmel_serial_enable_clk(struct udevice *dev) 222 { 223 struct atmel_serial_priv *priv = dev_get_priv(dev); 224 struct clk clk; 225 ulong clk_rate; 226 int ret; 227 228 ret = clk_get_by_index(dev, 0, &clk); 229 if (ret) 230 return -EINVAL; 231 232 if (dev_get_driver_data(dev) == CLK_TYPE_NORMAL) { 233 ret = clk_enable(&clk); 234 if (ret) 235 return ret; 236 } 237 238 clk_rate = clk_get_rate(&clk); 239 if (!clk_rate) 240 return -EINVAL; 241 242 priv->usart_clk_rate = clk_rate; 243 244 clk_free(&clk); 245 246 return 0; 247 } 248 249 static int atmel_serial_probe(struct udevice *dev) 250 { 251 struct atmel_serial_platdata *plat = dev->platdata; 252 struct atmel_serial_priv *priv = dev_get_priv(dev); 253 int ret; 254 #if CONFIG_IS_ENABLED(OF_CONTROL) 255 fdt_addr_t addr_base; 256 257 addr_base = devfdt_get_addr(dev); 258 if (addr_base == FDT_ADDR_T_NONE) 259 return -ENODEV; 260 261 plat->base_addr = (uint32_t)addr_base; 262 #endif 263 priv->usart = (atmel_usart3_t *)plat->base_addr; 264 265 ret = atmel_serial_enable_clk(dev); 266 if (ret) 267 return ret; 268 269 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); 270 271 return 0; 272 } 273 274 #if CONFIG_IS_ENABLED(OF_CONTROL) 275 static const struct udevice_id atmel_serial_ids[] = { 276 { 277 .compatible = "atmel,at91sam9260-dbgu", 278 .data = CLK_TYPE_DBGU, 279 }, 280 { 281 .compatible = "atmel,at91sam9260-usart", 282 .data = CLK_TYPE_NORMAL, 283 }, 284 { } 285 }; 286 #endif 287 288 U_BOOT_DRIVER(serial_atmel) = { 289 .name = "serial_atmel", 290 .id = UCLASS_SERIAL, 291 #if CONFIG_IS_ENABLED(OF_CONTROL) 292 .of_match = atmel_serial_ids, 293 .platdata_auto_alloc_size = sizeof(struct atmel_serial_platdata), 294 #endif 295 .probe = atmel_serial_probe, 296 .ops = &atmel_serial_ops, 297 .flags = DM_FLAG_PRE_RELOC, 298 .priv_auto_alloc_size = sizeof(struct atmel_serial_priv), 299 }; 300 #endif 301 302 #ifdef CONFIG_DEBUG_UART_ATMEL 303 static inline void _debug_uart_init(void) 304 { 305 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE; 306 307 _atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); 308 } 309 310 static inline void _debug_uart_putc(int ch) 311 { 312 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE; 313 314 while (!(readl(&usart->csr) & USART3_BIT(TXRDY))) 315 ; 316 317 writel(ch, &usart->thr); 318 } 319 320 DEBUG_UART_FUNCS 321 #endif 322