1 /* 2 * Copyright (C) 2004-2006 Atmel Corporation 3 * 4 * Modified to support C structur SoC access by 5 * Andreas Bießmann <biessmann@corscience.de> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 #include <common.h> 10 #include <clk.h> 11 #include <dm.h> 12 #include <errno.h> 13 #include <watchdog.h> 14 #include <serial.h> 15 #include <debug_uart.h> 16 #include <linux/compiler.h> 17 18 #include <asm/io.h> 19 #ifdef CONFIG_DM_SERIAL 20 #include <asm/arch/atmel_serial.h> 21 #endif 22 #include <asm/arch/clk.h> 23 #include <asm/arch/hardware.h> 24 25 #include "atmel_usart.h" 26 27 DECLARE_GLOBAL_DATA_PTR; 28 29 #ifndef CONFIG_DM_SERIAL 30 static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id, 31 int baudrate) 32 { 33 unsigned long divisor; 34 unsigned long usart_hz; 35 36 /* 37 * Master Clock 38 * Baud Rate = -------------- 39 * 16 * CD 40 */ 41 usart_hz = get_usart_clk_rate(id); 42 divisor = (usart_hz / 16 + baudrate / 2) / baudrate; 43 writel(USART3_BF(CD, divisor), &usart->brgr); 44 } 45 46 static void atmel_serial_init_internal(atmel_usart3_t *usart) 47 { 48 /* 49 * Just in case: drain transmitter register 50 * 1000us is enough for baudrate >= 9600 51 */ 52 if (!(readl(&usart->csr) & USART3_BIT(TXEMPTY))) 53 __udelay(1000); 54 55 writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); 56 } 57 58 static void atmel_serial_activate(atmel_usart3_t *usart) 59 { 60 writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) 61 | USART3_BF(USCLKS, USART3_USCLKS_MCK) 62 | USART3_BF(CHRL, USART3_CHRL_8) 63 | USART3_BF(PAR, USART3_PAR_NONE) 64 | USART3_BF(NBSTOP, USART3_NBSTOP_1)), 65 &usart->mr); 66 writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); 67 /* 100us is enough for the new settings to be settled */ 68 __udelay(100); 69 } 70 71 static void atmel_serial_setbrg(void) 72 { 73 atmel_serial_setbrg_internal((atmel_usart3_t *)CONFIG_USART_BASE, 74 CONFIG_USART_ID, gd->baudrate); 75 } 76 77 static int atmel_serial_init(void) 78 { 79 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 80 81 atmel_serial_init_internal(usart); 82 serial_setbrg(); 83 atmel_serial_activate(usart); 84 85 return 0; 86 } 87 88 static void atmel_serial_putc(char c) 89 { 90 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 91 92 if (c == '\n') 93 serial_putc('\r'); 94 95 while (!(readl(&usart->csr) & USART3_BIT(TXRDY))); 96 writel(c, &usart->thr); 97 } 98 99 static int atmel_serial_getc(void) 100 { 101 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 102 103 while (!(readl(&usart->csr) & USART3_BIT(RXRDY))) 104 WATCHDOG_RESET(); 105 return readl(&usart->rhr); 106 } 107 108 static int atmel_serial_tstc(void) 109 { 110 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; 111 return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0; 112 } 113 114 static struct serial_device atmel_serial_drv = { 115 .name = "atmel_serial", 116 .start = atmel_serial_init, 117 .stop = NULL, 118 .setbrg = atmel_serial_setbrg, 119 .putc = atmel_serial_putc, 120 .puts = default_serial_puts, 121 .getc = atmel_serial_getc, 122 .tstc = atmel_serial_tstc, 123 }; 124 125 void atmel_serial_initialize(void) 126 { 127 serial_register(&atmel_serial_drv); 128 } 129 130 __weak struct serial_device *default_serial_console(void) 131 { 132 return &atmel_serial_drv; 133 } 134 #endif 135 136 #ifdef CONFIG_DM_SERIAL 137 enum serial_clk_type { 138 CLK_TYPE_NORMAL = 0, 139 CLK_TYPE_DBGU, 140 }; 141 142 struct atmel_serial_priv { 143 atmel_usart3_t *usart; 144 ulong usart_clk_rate; 145 }; 146 147 static void _atmel_serial_set_brg(atmel_usart3_t *usart, 148 ulong usart_clk_rate, int baudrate) 149 { 150 unsigned long divisor; 151 152 divisor = (usart_clk_rate / 16 + baudrate / 2) / baudrate; 153 writel(USART3_BF(CD, divisor), &usart->brgr); 154 } 155 156 void _atmel_serial_init(atmel_usart3_t *usart, 157 ulong usart_clk_rate, int baudrate) 158 { 159 writel(USART3_BIT(RXDIS) | USART3_BIT(TXDIS), &usart->cr); 160 161 writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL) | 162 USART3_BF(USCLKS, USART3_USCLKS_MCK) | 163 USART3_BF(CHRL, USART3_CHRL_8) | 164 USART3_BF(PAR, USART3_PAR_NONE) | 165 USART3_BF(NBSTOP, USART3_NBSTOP_1)), &usart->mr); 166 167 _atmel_serial_set_brg(usart, usart_clk_rate, baudrate); 168 169 writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr); 170 writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr); 171 } 172 173 int atmel_serial_setbrg(struct udevice *dev, int baudrate) 174 { 175 struct atmel_serial_priv *priv = dev_get_priv(dev); 176 177 _atmel_serial_set_brg(priv->usart, priv->usart_clk_rate, baudrate); 178 179 return 0; 180 } 181 182 static int atmel_serial_getc(struct udevice *dev) 183 { 184 struct atmel_serial_priv *priv = dev_get_priv(dev); 185 186 if (!(readl(&priv->usart->csr) & USART3_BIT(RXRDY))) 187 return -EAGAIN; 188 189 return readl(&priv->usart->rhr); 190 } 191 192 static int atmel_serial_putc(struct udevice *dev, const char ch) 193 { 194 struct atmel_serial_priv *priv = dev_get_priv(dev); 195 196 if (!(readl(&priv->usart->csr) & USART3_BIT(TXRDY))) 197 return -EAGAIN; 198 199 writel(ch, &priv->usart->thr); 200 201 return 0; 202 } 203 204 static int atmel_serial_pending(struct udevice *dev, bool input) 205 { 206 struct atmel_serial_priv *priv = dev_get_priv(dev); 207 uint32_t csr = readl(&priv->usart->csr); 208 209 if (input) 210 return csr & USART3_BIT(RXRDY) ? 1 : 0; 211 else 212 return csr & USART3_BIT(TXEMPTY) ? 0 : 1; 213 } 214 215 static const struct dm_serial_ops atmel_serial_ops = { 216 .putc = atmel_serial_putc, 217 .pending = atmel_serial_pending, 218 .getc = atmel_serial_getc, 219 .setbrg = atmel_serial_setbrg, 220 }; 221 222 static int atmel_serial_enable_clk(struct udevice *dev) 223 { 224 struct atmel_serial_priv *priv = dev_get_priv(dev); 225 struct clk clk; 226 ulong clk_rate; 227 int ret; 228 229 ret = clk_get_by_index(dev, 0, &clk); 230 if (ret) 231 return -EINVAL; 232 233 if (dev_get_driver_data(dev) == CLK_TYPE_NORMAL) { 234 ret = clk_enable(&clk); 235 if (ret) 236 return ret; 237 } 238 239 clk_rate = clk_get_rate(&clk); 240 if (!clk_rate) 241 return -EINVAL; 242 243 priv->usart_clk_rate = clk_rate; 244 245 clk_free(&clk); 246 247 return 0; 248 } 249 250 static int atmel_serial_probe(struct udevice *dev) 251 { 252 struct atmel_serial_platdata *plat = dev->platdata; 253 struct atmel_serial_priv *priv = dev_get_priv(dev); 254 int ret; 255 #if CONFIG_IS_ENABLED(OF_CONTROL) 256 fdt_addr_t addr_base; 257 258 addr_base = dev_get_addr(dev); 259 if (addr_base == FDT_ADDR_T_NONE) 260 return -ENODEV; 261 262 plat->base_addr = (uint32_t)addr_base; 263 #endif 264 priv->usart = (atmel_usart3_t *)plat->base_addr; 265 266 ret = atmel_serial_enable_clk(dev); 267 if (ret) 268 return ret; 269 270 _atmel_serial_init(priv->usart, priv->usart_clk_rate, gd->baudrate); 271 272 return 0; 273 } 274 275 #if CONFIG_IS_ENABLED(OF_CONTROL) 276 static const struct udevice_id atmel_serial_ids[] = { 277 { 278 .compatible = "atmel,at91sam9260-dbgu", 279 .data = CLK_TYPE_DBGU, 280 }, 281 { 282 .compatible = "atmel,at91sam9260-usart", 283 .data = CLK_TYPE_NORMAL, 284 }, 285 { } 286 }; 287 #endif 288 289 U_BOOT_DRIVER(serial_atmel) = { 290 .name = "serial_atmel", 291 .id = UCLASS_SERIAL, 292 #if CONFIG_IS_ENABLED(OF_CONTROL) 293 .of_match = atmel_serial_ids, 294 .platdata_auto_alloc_size = sizeof(struct atmel_serial_platdata), 295 #endif 296 .probe = atmel_serial_probe, 297 .ops = &atmel_serial_ops, 298 .flags = DM_FLAG_PRE_RELOC, 299 .priv_auto_alloc_size = sizeof(struct atmel_serial_priv), 300 }; 301 #endif 302 303 #ifdef CONFIG_DEBUG_UART_ATMEL 304 static inline void _debug_uart_init(void) 305 { 306 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE; 307 308 _atmel_serial_init(usart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); 309 } 310 311 static inline void _debug_uart_putc(int ch) 312 { 313 atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_DEBUG_UART_BASE; 314 315 while (!(readl(&usart->csr) & USART3_BIT(TXRDY))) 316 ; 317 318 writel(ch, &usart->thr); 319 } 320 321 DEBUG_UART_FUNCS 322 #endif 323