xref: /openbmc/u-boot/drivers/serial/altera_uart.c (revision d9b23e26)
1 /*
2  * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
3  * Scott McNutt <smcnutt@psyent.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #include <common.h>
9 #include <dm.h>
10 #include <errno.h>
11 #include <serial.h>
12 #include <asm/io.h>
13 
14 DECLARE_GLOBAL_DATA_PTR;
15 
16 /* status register */
17 #define ALTERA_UART_TMT		BIT(5)	/* tx empty */
18 #define ALTERA_UART_TRDY	BIT(6)	/* tx ready */
19 #define ALTERA_UART_RRDY	BIT(7)	/* rx ready */
20 
21 struct altera_uart_regs {
22 	u32	rxdata;		/* Rx data reg */
23 	u32	txdata;		/* Tx data reg */
24 	u32	status;		/* Status reg */
25 	u32	control;	/* Control reg */
26 	u32	divisor;	/* Baud rate divisor reg */
27 	u32	endofpacket;	/* End-of-packet reg */
28 };
29 
30 struct altera_uart_platdata {
31 	struct altera_uart_regs *regs;
32 	unsigned int uartclk;
33 };
34 
35 static int altera_uart_setbrg(struct udevice *dev, int baudrate)
36 {
37 	struct altera_uart_platdata *plat = dev->platdata;
38 	struct altera_uart_regs *const regs = plat->regs;
39 	u32 div;
40 
41 	div = (plat->uartclk / baudrate) - 1;
42 	writel(div, &regs->divisor);
43 
44 	return 0;
45 }
46 
47 static int altera_uart_putc(struct udevice *dev, const char ch)
48 {
49 	struct altera_uart_platdata *plat = dev->platdata;
50 	struct altera_uart_regs *const regs = plat->regs;
51 
52 	if (!(readl(&regs->status) & ALTERA_UART_TRDY))
53 		return -EAGAIN;
54 
55 	writel(ch, &regs->txdata);
56 
57 	return 0;
58 }
59 
60 static int altera_uart_pending(struct udevice *dev, bool input)
61 {
62 	struct altera_uart_platdata *plat = dev->platdata;
63 	struct altera_uart_regs *const regs = plat->regs;
64 	u32 st = readl(&regs->status);
65 
66 	if (input)
67 		return st & ALTERA_UART_RRDY ? 1 : 0;
68 	else
69 		return !(st & ALTERA_UART_TMT);
70 }
71 
72 static int altera_uart_getc(struct udevice *dev)
73 {
74 	struct altera_uart_platdata *plat = dev->platdata;
75 	struct altera_uart_regs *const regs = plat->regs;
76 
77 	if (!(readl(&regs->status) & ALTERA_UART_RRDY))
78 		return -EAGAIN;
79 
80 	return readl(&regs->rxdata) & 0xff;
81 }
82 
83 static int altera_uart_probe(struct udevice *dev)
84 {
85 	return 0;
86 }
87 
88 static int altera_uart_ofdata_to_platdata(struct udevice *dev)
89 {
90 	struct altera_uart_platdata *plat = dev_get_platdata(dev);
91 
92 	plat->regs = map_physmem(devfdt_get_addr(dev),
93 				 sizeof(struct altera_uart_regs),
94 				 MAP_NOCACHE);
95 	plat->uartclk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
96 		"clock-frequency", 0);
97 
98 	return 0;
99 }
100 
101 static const struct dm_serial_ops altera_uart_ops = {
102 	.putc = altera_uart_putc,
103 	.pending = altera_uart_pending,
104 	.getc = altera_uart_getc,
105 	.setbrg = altera_uart_setbrg,
106 };
107 
108 static const struct udevice_id altera_uart_ids[] = {
109 	{ .compatible = "altr,uart-1.0" },
110 	{}
111 };
112 
113 U_BOOT_DRIVER(altera_uart) = {
114 	.name	= "altera_uart",
115 	.id	= UCLASS_SERIAL,
116 	.of_match = altera_uart_ids,
117 	.ofdata_to_platdata = altera_uart_ofdata_to_platdata,
118 	.platdata_auto_alloc_size = sizeof(struct altera_uart_platdata),
119 	.probe = altera_uart_probe,
120 	.ops	= &altera_uart_ops,
121 	.flags = DM_FLAG_PRE_RELOC,
122 };
123 
124 #ifdef CONFIG_DEBUG_UART_ALTERA_UART
125 
126 #include <debug_uart.h>
127 
128 static inline void _debug_uart_init(void)
129 {
130 	struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE;
131 	u32 div;
132 
133 	div = (CONFIG_DEBUG_UART_CLOCK / CONFIG_BAUDRATE) - 1;
134 	writel(div, &regs->divisor);
135 }
136 
137 static inline void _debug_uart_putc(int ch)
138 {
139 	struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE;
140 
141 	while (1) {
142 		u32 st = readl(&regs->status);
143 
144 		if (st & ALTERA_UART_TRDY)
145 			break;
146 	}
147 
148 	writel(ch, &regs->txdata);
149 }
150 
151 DEBUG_UART_FUNCS
152 
153 #endif
154