1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * (C) Copyright 2004, Psyent Corporation <www.psyent.com> 4 * Scott McNutt <smcnutt@psyent.com> 5 */ 6 7 #include <common.h> 8 #include <dm.h> 9 #include <errno.h> 10 #include <serial.h> 11 #include <asm/io.h> 12 13 DECLARE_GLOBAL_DATA_PTR; 14 15 /* status register */ 16 #define ALTERA_UART_TMT BIT(5) /* tx empty */ 17 #define ALTERA_UART_TRDY BIT(6) /* tx ready */ 18 #define ALTERA_UART_RRDY BIT(7) /* rx ready */ 19 20 struct altera_uart_regs { 21 u32 rxdata; /* Rx data reg */ 22 u32 txdata; /* Tx data reg */ 23 u32 status; /* Status reg */ 24 u32 control; /* Control reg */ 25 u32 divisor; /* Baud rate divisor reg */ 26 u32 endofpacket; /* End-of-packet reg */ 27 }; 28 29 struct altera_uart_platdata { 30 struct altera_uart_regs *regs; 31 unsigned int uartclk; 32 }; 33 34 static int altera_uart_setbrg(struct udevice *dev, int baudrate) 35 { 36 struct altera_uart_platdata *plat = dev->platdata; 37 struct altera_uart_regs *const regs = plat->regs; 38 u32 div; 39 40 div = (plat->uartclk / baudrate) - 1; 41 writel(div, ®s->divisor); 42 43 return 0; 44 } 45 46 static int altera_uart_putc(struct udevice *dev, const char ch) 47 { 48 struct altera_uart_platdata *plat = dev->platdata; 49 struct altera_uart_regs *const regs = plat->regs; 50 51 if (!(readl(®s->status) & ALTERA_UART_TRDY)) 52 return -EAGAIN; 53 54 writel(ch, ®s->txdata); 55 56 return 0; 57 } 58 59 static int altera_uart_pending(struct udevice *dev, bool input) 60 { 61 struct altera_uart_platdata *plat = dev->platdata; 62 struct altera_uart_regs *const regs = plat->regs; 63 u32 st = readl(®s->status); 64 65 if (input) 66 return st & ALTERA_UART_RRDY ? 1 : 0; 67 else 68 return !(st & ALTERA_UART_TMT); 69 } 70 71 static int altera_uart_getc(struct udevice *dev) 72 { 73 struct altera_uart_platdata *plat = dev->platdata; 74 struct altera_uart_regs *const regs = plat->regs; 75 76 if (!(readl(®s->status) & ALTERA_UART_RRDY)) 77 return -EAGAIN; 78 79 return readl(®s->rxdata) & 0xff; 80 } 81 82 static int altera_uart_probe(struct udevice *dev) 83 { 84 return 0; 85 } 86 87 static int altera_uart_ofdata_to_platdata(struct udevice *dev) 88 { 89 struct altera_uart_platdata *plat = dev_get_platdata(dev); 90 91 plat->regs = map_physmem(devfdt_get_addr(dev), 92 sizeof(struct altera_uart_regs), 93 MAP_NOCACHE); 94 plat->uartclk = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), 95 "clock-frequency", 0); 96 97 return 0; 98 } 99 100 static const struct dm_serial_ops altera_uart_ops = { 101 .putc = altera_uart_putc, 102 .pending = altera_uart_pending, 103 .getc = altera_uart_getc, 104 .setbrg = altera_uart_setbrg, 105 }; 106 107 static const struct udevice_id altera_uart_ids[] = { 108 { .compatible = "altr,uart-1.0" }, 109 {} 110 }; 111 112 U_BOOT_DRIVER(altera_uart) = { 113 .name = "altera_uart", 114 .id = UCLASS_SERIAL, 115 .of_match = altera_uart_ids, 116 .ofdata_to_platdata = altera_uart_ofdata_to_platdata, 117 .platdata_auto_alloc_size = sizeof(struct altera_uart_platdata), 118 .probe = altera_uart_probe, 119 .ops = &altera_uart_ops, 120 .flags = DM_FLAG_PRE_RELOC, 121 }; 122 123 #ifdef CONFIG_DEBUG_UART_ALTERA_UART 124 125 #include <debug_uart.h> 126 127 static inline void _debug_uart_init(void) 128 { 129 struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE; 130 u32 div; 131 132 div = (CONFIG_DEBUG_UART_CLOCK / CONFIG_BAUDRATE) - 1; 133 writel(div, ®s->divisor); 134 } 135 136 static inline void _debug_uart_putc(int ch) 137 { 138 struct altera_uart_regs *regs = (void *)CONFIG_DEBUG_UART_BASE; 139 140 while (1) { 141 u32 st = readl(®s->status); 142 143 if (st & ALTERA_UART_TRDY) 144 break; 145 } 146 147 writel(ch, ®s->txdata); 148 } 149 150 DEBUG_UART_FUNCS 151 152 #endif 153