xref: /openbmc/u-boot/drivers/rtc/m48t35ax.c (revision 894c3ad2)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2001
4  * Erik Theisen,  Wave 7 Optics, etheisen@mindspring.com.
5  */
6 
7 /*
8  * Date & Time support for ST Electronics M48T35Ax RTC
9  */
10 
11 /*#define       DEBUG */
12 
13 
14 #include <common.h>
15 #include <command.h>
16 #include <rtc.h>
17 #include <config.h>
18 
19 #if defined(CONFIG_CMD_DATE)
20 
21 static uchar rtc_read  (uchar reg);
22 static void  rtc_write (uchar reg, uchar val);
23 
24 /* ------------------------------------------------------------------------- */
25 
26 int rtc_get (struct rtc_time *tmp)
27 {
28 	uchar sec, min, hour, cent_day, date, month, year;
29 	uchar ccr;			/* Clock control register */
30 
31 	/* Lock RTC for read using clock control register */
32 	ccr = rtc_read(0);
33 	ccr = ccr | 0x40;
34 	rtc_write(0, ccr);
35 
36 	sec	= rtc_read (0x1);
37 	min	= rtc_read (0x2);
38 	hour	= rtc_read (0x3);
39 	cent_day= rtc_read (0x4);
40 	date	= rtc_read (0x5);
41 	month   = rtc_read (0x6);
42 	year	= rtc_read (0x7);
43 
44 	/* UNLock RTC */
45 	ccr = rtc_read(0);
46 	ccr = ccr & 0xBF;
47 	rtc_write(0, ccr);
48 
49 	debug ( "Get RTC year: %02x month: %02x date: %02x cent_day: %02x "
50 		"hr: %02x min: %02x sec: %02x\n",
51 		year, month, date, cent_day,
52 		hour, min, sec );
53 
54 	tmp->tm_sec  = bcd2bin (sec  & 0x7F);
55 	tmp->tm_min  = bcd2bin (min  & 0x7F);
56 	tmp->tm_hour = bcd2bin (hour & 0x3F);
57 	tmp->tm_mday = bcd2bin (date & 0x3F);
58 	tmp->tm_mon  = bcd2bin (month & 0x1F);
59 	tmp->tm_year = bcd2bin (year) + ((cent_day & 0x10) ? 2000 : 1900);
60 	tmp->tm_wday = bcd2bin (cent_day & 0x07);
61 	tmp->tm_yday = 0;
62 	tmp->tm_isdst= 0;
63 
64 	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
65 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
66 		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
67 
68 	return 0;
69 }
70 
71 int rtc_set (struct rtc_time *tmp)
72 {
73 	uchar ccr;			/* Clock control register */
74 	uchar century;
75 
76 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
77 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
78 		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
79 
80 	/* Lock RTC for write using clock control register */
81 	ccr = rtc_read(0);
82 	ccr = ccr | 0x80;
83 	rtc_write(0, ccr);
84 
85 	rtc_write (0x07, bin2bcd(tmp->tm_year % 100));
86 	rtc_write (0x06, bin2bcd(tmp->tm_mon));
87 	rtc_write (0x05, bin2bcd(tmp->tm_mday));
88 
89 	century = ((tmp->tm_year >= 2000) ? 0x10 : 0) | 0x20;
90 	rtc_write (0x04, bin2bcd(tmp->tm_wday) | century);
91 
92 	rtc_write (0x03, bin2bcd(tmp->tm_hour));
93 	rtc_write (0x02, bin2bcd(tmp->tm_min ));
94 	rtc_write (0x01, bin2bcd(tmp->tm_sec ));
95 
96 	/* UNLock RTC */
97 	ccr = rtc_read(0);
98 	ccr = ccr & 0x7F;
99 	rtc_write(0, ccr);
100 
101 	return 0;
102 }
103 
104 void rtc_reset (void)
105 {
106 	uchar val;
107 
108 	/* Clear all clock control registers */
109 	rtc_write (0x0, 0x80);		/* No Read Lock or calibration */
110 
111 	/* Clear stop bit */
112 	val = rtc_read (0x1);
113 	val &= 0x7f;
114 	rtc_write(0x1, val);
115 
116 	/* Enable century / disable frequency test */
117 	val = rtc_read (0x4);
118 	val = (val & 0xBF) | 0x20;
119 	rtc_write(0x4, val);
120 
121 	/* Clear write lock */
122 	rtc_write(0x0, 0);
123 }
124 
125 /* ------------------------------------------------------------------------- */
126 
127 static uchar rtc_read (uchar reg)
128 {
129 	return *(unsigned char *)
130 		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg);
131 }
132 
133 static void rtc_write (uchar reg, uchar val)
134 {
135 	*(unsigned char *)
136 		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
137 }
138 
139 #endif
140