xref: /openbmc/u-boot/drivers/rtc/m48t35ax.c (revision 85231c08)
1 /*
2  * (C) Copyright 2001
3  * Erik Theisen,  Wave 7 Optics, etheisen@mindspring.com.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 /*
9  * Date & Time support for ST Electronics M48T35Ax RTC
10  */
11 
12 /*#define       DEBUG */
13 
14 
15 #include <common.h>
16 #include <command.h>
17 #include <rtc.h>
18 #include <config.h>
19 
20 #if defined(CONFIG_CMD_DATE)
21 
22 static uchar rtc_read  (uchar reg);
23 static void  rtc_write (uchar reg, uchar val);
24 
25 /* ------------------------------------------------------------------------- */
26 
27 int rtc_get (struct rtc_time *tmp)
28 {
29 	uchar sec, min, hour, cent_day, date, month, year;
30 	uchar ccr;			/* Clock control register */
31 
32 	/* Lock RTC for read using clock control register */
33 	ccr = rtc_read(0);
34 	ccr = ccr | 0x40;
35 	rtc_write(0, ccr);
36 
37 	sec	= rtc_read (0x1);
38 	min	= rtc_read (0x2);
39 	hour	= rtc_read (0x3);
40 	cent_day= rtc_read (0x4);
41 	date	= rtc_read (0x5);
42 	month   = rtc_read (0x6);
43 	year	= rtc_read (0x7);
44 
45 	/* UNLock RTC */
46 	ccr = rtc_read(0);
47 	ccr = ccr & 0xBF;
48 	rtc_write(0, ccr);
49 
50 	debug ( "Get RTC year: %02x month: %02x date: %02x cent_day: %02x "
51 		"hr: %02x min: %02x sec: %02x\n",
52 		year, month, date, cent_day,
53 		hour, min, sec );
54 
55 	tmp->tm_sec  = bcd2bin (sec  & 0x7F);
56 	tmp->tm_min  = bcd2bin (min  & 0x7F);
57 	tmp->tm_hour = bcd2bin (hour & 0x3F);
58 	tmp->tm_mday = bcd2bin (date & 0x3F);
59 	tmp->tm_mon  = bcd2bin (month & 0x1F);
60 	tmp->tm_year = bcd2bin (year) + ((cent_day & 0x10) ? 2000 : 1900);
61 	tmp->tm_wday = bcd2bin (cent_day & 0x07);
62 	tmp->tm_yday = 0;
63 	tmp->tm_isdst= 0;
64 
65 	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
66 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
67 		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
68 
69 	return 0;
70 }
71 
72 int rtc_set (struct rtc_time *tmp)
73 {
74 	uchar ccr;			/* Clock control register */
75 	uchar century;
76 
77 	debug ( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
78 		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
79 		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
80 
81 	/* Lock RTC for write using clock control register */
82 	ccr = rtc_read(0);
83 	ccr = ccr | 0x80;
84 	rtc_write(0, ccr);
85 
86 	rtc_write (0x07, bin2bcd(tmp->tm_year % 100));
87 	rtc_write (0x06, bin2bcd(tmp->tm_mon));
88 	rtc_write (0x05, bin2bcd(tmp->tm_mday));
89 
90 	century = ((tmp->tm_year >= 2000) ? 0x10 : 0) | 0x20;
91 	rtc_write (0x04, bin2bcd(tmp->tm_wday) | century);
92 
93 	rtc_write (0x03, bin2bcd(tmp->tm_hour));
94 	rtc_write (0x02, bin2bcd(tmp->tm_min ));
95 	rtc_write (0x01, bin2bcd(tmp->tm_sec ));
96 
97 	/* UNLock RTC */
98 	ccr = rtc_read(0);
99 	ccr = ccr & 0x7F;
100 	rtc_write(0, ccr);
101 
102 	return 0;
103 }
104 
105 void rtc_reset (void)
106 {
107 	uchar val;
108 
109 	/* Clear all clock control registers */
110 	rtc_write (0x0, 0x80);		/* No Read Lock or calibration */
111 
112 	/* Clear stop bit */
113 	val = rtc_read (0x1);
114 	val &= 0x7f;
115 	rtc_write(0x1, val);
116 
117 	/* Enable century / disable frequency test */
118 	val = rtc_read (0x4);
119 	val = (val & 0xBF) | 0x20;
120 	rtc_write(0x4, val);
121 
122 	/* Clear write lock */
123 	rtc_write(0x0, 0);
124 }
125 
126 /* ------------------------------------------------------------------------- */
127 
128 static uchar rtc_read (uchar reg)
129 {
130 	return *(unsigned char *)
131 		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg);
132 }
133 
134 static void rtc_write (uchar reg, uchar val)
135 {
136 	*(unsigned char *)
137 		((CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - 8) + reg) = val;
138 }
139 
140 #endif
141