xref: /openbmc/u-boot/drivers/rtc/m41t62.c (revision ecab65e4)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2018
4  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de.
5  *
6  * (C) Copyright 2008
7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
8  *
9  * based on a the Linux rtc-m41t80.c driver which is:
10  *   Alexander Bigga <ab@mycable.de>, 2006 (c) mycable GmbH
11  */
12 
13 /*
14  * Date & Time support for STMicroelectronics M41T62
15  */
16 
17 /* #define	DEBUG	*/
18 
19 #include <common.h>
20 #include <command.h>
21 #include <dm.h>
22 #include <rtc.h>
23 #include <i2c.h>
24 
25 #define M41T62_REG_SSEC	0
26 #define M41T62_REG_SEC	1
27 #define M41T62_REG_MIN	2
28 #define M41T62_REG_HOUR	3
29 #define M41T62_REG_WDAY	4
30 #define M41T62_REG_DAY	5
31 #define M41T62_REG_MON	6
32 #define M41T62_REG_YEAR	7
33 #define M41T62_REG_ALARM_MON	0xa
34 #define M41T62_REG_ALARM_DAY	0xb
35 #define M41T62_REG_ALARM_HOUR	0xc
36 #define M41T62_REG_ALARM_MIN	0xd
37 #define M41T62_REG_ALARM_SEC	0xe
38 #define M41T62_REG_FLAGS	0xf
39 
40 #define M41T62_DATETIME_REG_SIZE	(M41T62_REG_YEAR + 1)
41 #define M41T62_ALARM_REG_SIZE	\
42 	(M41T62_REG_ALARM_SEC + 1 - M41T62_REG_ALARM_MON)
43 
44 #define M41T62_SEC_ST		(1 << 7)	/* ST: Stop Bit */
45 #define M41T62_ALMON_AFE	(1 << 7)	/* AFE: AF Enable Bit */
46 #define M41T62_ALMON_SQWE	(1 << 6)	/* SQWE: SQW Enable Bit */
47 #define M41T62_ALHOUR_HT	(1 << 6)	/* HT: Halt Update Bit */
48 #define M41T62_FLAGS_AF		(1 << 6)	/* AF: Alarm Flag Bit */
49 #define M41T62_FLAGS_BATT_LOW	(1 << 4)	/* BL: Battery Low Bit */
50 
51 #define M41T62_FEATURE_HT	(1 << 0)
52 #define M41T62_FEATURE_BL	(1 << 1)
53 
54 #define M41T80_ALHOUR_HT	(1 << 6)	/* HT: Halt Update Bit */
55 
56 static void m41t62_update_rtc_time(struct rtc_time *tm, u8 *buf)
57 {
58 	debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
59 	      "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
60 	      __FUNCTION__,
61 	      buf[0], buf[1], buf[2], buf[3],
62 	      buf[4], buf[5], buf[6], buf[7]);
63 
64 	tm->tm_sec = bcd2bin(buf[M41T62_REG_SEC] & 0x7f);
65 	tm->tm_min = bcd2bin(buf[M41T62_REG_MIN] & 0x7f);
66 	tm->tm_hour = bcd2bin(buf[M41T62_REG_HOUR] & 0x3f);
67 	tm->tm_mday = bcd2bin(buf[M41T62_REG_DAY] & 0x3f);
68 	tm->tm_wday = buf[M41T62_REG_WDAY] & 0x07;
69 	tm->tm_mon = bcd2bin(buf[M41T62_REG_MON] & 0x1f);
70 
71 	/* assume 20YY not 19YY, and ignore the Century Bit */
72 	/* U-Boot needs to add 1900 here */
73 	tm->tm_year = bcd2bin(buf[M41T62_REG_YEAR]) + 100 + 1900;
74 
75 	debug("%s: tm is secs=%d, mins=%d, hours=%d, "
76 	      "mday=%d, mon=%d, year=%d, wday=%d\n",
77 	      __FUNCTION__,
78 	      tm->tm_sec, tm->tm_min, tm->tm_hour,
79 	      tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
80 }
81 
82 static void m41t62_set_rtc_buf(const struct rtc_time *tm, u8 *buf)
83 {
84 	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
85 	      tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
86 	      tm->tm_hour, tm->tm_min, tm->tm_sec);
87 
88 	/* Merge time-data and register flags into buf[0..7] */
89 	buf[M41T62_REG_SSEC] = 0;
90 	buf[M41T62_REG_SEC] =
91 		bin2bcd(tm->tm_sec) | (buf[M41T62_REG_SEC] & ~0x7f);
92 	buf[M41T62_REG_MIN] =
93 		bin2bcd(tm->tm_min) | (buf[M41T62_REG_MIN] & ~0x7f);
94 	buf[M41T62_REG_HOUR] =
95 		bin2bcd(tm->tm_hour) | (buf[M41T62_REG_HOUR] & ~0x3f) ;
96 	buf[M41T62_REG_WDAY] =
97 		(tm->tm_wday & 0x07) | (buf[M41T62_REG_WDAY] & ~0x07);
98 	buf[M41T62_REG_DAY] =
99 		bin2bcd(tm->tm_mday) | (buf[M41T62_REG_DAY] & ~0x3f);
100 	buf[M41T62_REG_MON] =
101 		bin2bcd(tm->tm_mon) | (buf[M41T62_REG_MON] & ~0x1f);
102 	/* assume 20YY not 19YY */
103 	buf[M41T62_REG_YEAR] = bin2bcd(tm->tm_year % 100);
104 }
105 
106 #ifdef CONFIG_DM_RTC
107 static int m41t62_rtc_get(struct udevice *dev, struct rtc_time *tm)
108 {
109 	u8 buf[M41T62_DATETIME_REG_SIZE];
110 	int ret;
111 
112 	ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
113 	if (ret)
114 		return ret;
115 
116 	m41t62_update_rtc_time(tm, buf);
117 
118 	return 0;
119 }
120 
121 static int m41t62_rtc_set(struct udevice *dev, const struct rtc_time *tm)
122 {
123 	u8 buf[M41T62_DATETIME_REG_SIZE];
124 	int ret;
125 
126 	ret = dm_i2c_read(dev, 0, buf, sizeof(buf));
127 	if (ret)
128 		return ret;
129 
130 	m41t62_set_rtc_buf(tm, buf);
131 
132 	ret = dm_i2c_write(dev, 0, buf, sizeof(buf));
133 	if (ret) {
134 		printf("I2C write failed in %s()\n", __func__);
135 		return ret;
136 	}
137 
138 	return 0;
139 }
140 
141 static int m41t62_rtc_reset(struct udevice *dev)
142 {
143 	u8 val;
144 
145 	/*
146 	 * M41T82: Make sure HT (Halt Update) bit is cleared.
147 	 * This bit is 0 in M41T62 so its save to clear it always.
148 	 */
149 
150 	int ret = dm_i2c_read(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
151 
152 	val &= ~M41T80_ALHOUR_HT;
153 	ret |= dm_i2c_write(dev, M41T62_REG_ALARM_HOUR, &val, sizeof(val));
154 
155 	return ret;
156 }
157 
158 static const struct rtc_ops m41t62_rtc_ops = {
159 	.get = m41t62_rtc_get,
160 	.set = m41t62_rtc_set,
161 	.reset = m41t62_rtc_reset,
162 };
163 
164 static const struct udevice_id m41t62_rtc_ids[] = {
165 	{ .compatible = "st,m41t62" },
166 	{ .compatible = "microcrystal,rv4162" },
167 	{ }
168 };
169 
170 U_BOOT_DRIVER(rtc_m41t62) = {
171 	.name	= "rtc-m41t62",
172 	.id	= UCLASS_RTC,
173 	.of_match = m41t62_rtc_ids,
174 	.ops	= &m41t62_rtc_ops,
175 };
176 
177 #else /* NON DM RTC code - will be removed */
178 int rtc_get(struct rtc_time *tm)
179 {
180 	u8 buf[M41T62_DATETIME_REG_SIZE];
181 
182 	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
183 	m41t62_update_rtc_time(tm, buf);
184 
185 	return 0;
186 }
187 
188 int rtc_set(struct rtc_time *tm)
189 {
190 	u8 buf[M41T62_DATETIME_REG_SIZE];
191 
192 	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE);
193 	m41t62_set_rtc_buf(tm, buf);
194 
195 	if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf,
196 		      M41T62_DATETIME_REG_SIZE)) {
197 		printf("I2C write failed in %s()\n", __func__);
198 		return -1;
199 	}
200 
201 	return 0;
202 }
203 
204 void rtc_reset(void)
205 {
206 	u8 val;
207 
208 	/*
209 	 * M41T82: Make sure HT (Halt Update) bit is cleared.
210 	 * This bit is 0 in M41T62 so its save to clear it always.
211 	 */
212 	i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
213 	val &= ~M41T80_ALHOUR_HT;
214 	i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1);
215 }
216 #endif /* CONFIG_DM_RTC */
217