xref: /openbmc/u-boot/drivers/rtc/imxdi.c (revision af2a4093)
1 /*
2  * (C) Copyright 2009-2012 ADVANSEE
3  * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
4  *
5  * Based on the Linux rtc-imxdi.c driver, which is:
6  * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
7  * Copyright 2010 Orex Computed Radiography
8  *
9  * See file CREDITS for list of people who contributed to this
10  * project.
11  *
12  * This program is free software; you can redistribute it and/or
13  * modify it under the terms of the GNU General Public License as
14  * published by the Free Software Foundation; either version 2 of
15  * the License, or (at your option) any later version.
16  *
17  * This program is distributed in the hope that it will be useful,
18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20  * GNU General Public License for more details.
21  *
22  * You should have received a copy of the GNU General Public License
23  * along with this program; if not, write to the Free Software
24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25  * MA 02111-1307 USA
26  */
27 
28 /*
29  * Date & Time support for Freescale i.MX DryIce RTC
30  */
31 
32 #include <common.h>
33 #include <command.h>
34 #include <linux/compat.h>
35 #include <rtc.h>
36 
37 #if defined(CONFIG_CMD_DATE)
38 
39 #include <asm/io.h>
40 #include <asm/arch/imx-regs.h>
41 
42 /* DryIce Register Definitions */
43 
44 struct imxdi_regs {
45 	u32 dtcmr;			/* Time Counter MSB Reg */
46 	u32 dtclr;			/* Time Counter LSB Reg */
47 	u32 dcamr;			/* Clock Alarm MSB Reg */
48 	u32 dcalr;			/* Clock Alarm LSB Reg */
49 	u32 dcr;			/* Control Reg */
50 	u32 dsr;			/* Status Reg */
51 	u32 dier;			/* Interrupt Enable Reg */
52 };
53 
54 #define DCAMR_UNSET	0xFFFFFFFF	/* doomsday - 1 sec */
55 
56 #define DCR_TCE		(1 << 3)	/* Time Counter Enable */
57 
58 #define DSR_WBF		(1 << 10)	/* Write Busy Flag */
59 #define DSR_WNF		(1 << 9)	/* Write Next Flag */
60 #define DSR_WCF		(1 << 8)	/* Write Complete Flag */
61 #define DSR_WEF		(1 << 7)	/* Write Error Flag */
62 #define DSR_CAF		(1 << 4)	/* Clock Alarm Flag */
63 #define DSR_NVF		(1 << 1)	/* Non-Valid Flag */
64 #define DSR_SVF		(1 << 0)	/* Security Violation Flag */
65 
66 #define DIER_WNIE	(1 << 9)	/* Write Next Interrupt Enable */
67 #define DIER_WCIE	(1 << 8)	/* Write Complete Interrupt Enable */
68 #define DIER_WEIE	(1 << 7)	/* Write Error Interrupt Enable */
69 #define DIER_CAIE	(1 << 4)	/* Clock Alarm Interrupt Enable */
70 
71 /* Driver Private Data */
72 
73 struct imxdi_data {
74 	struct imxdi_regs __iomem	*regs;
75 	int				init_done;
76 };
77 
78 static struct imxdi_data data;
79 
80 /*
81  * This function attempts to clear the dryice write-error flag.
82  *
83  * A dryice write error is similar to a bus fault and should not occur in
84  * normal operation.  Clearing the flag requires another write, so the root
85  * cause of the problem may need to be fixed before the flag can be cleared.
86  */
87 static void clear_write_error(void)
88 {
89 	int cnt;
90 
91 	puts("### Warning: RTC - Register write error!\n");
92 
93 	/* clear the write error flag */
94 	__raw_writel(DSR_WEF, &data.regs->dsr);
95 
96 	/* wait for it to take effect */
97 	for (cnt = 0; cnt < 1000; cnt++) {
98 		if ((__raw_readl(&data.regs->dsr) & DSR_WEF) == 0)
99 			return;
100 		udelay(10);
101 	}
102 	puts("### Error: RTC - Cannot clear write-error flag!\n");
103 }
104 
105 /*
106  * Write a dryice register and wait until it completes.
107  *
108  * Use interrupt flags to determine when the write has completed.
109  */
110 #define DI_WRITE_WAIT(val, reg)						\
111 (									\
112 	/* do the register write */					\
113 	__raw_writel((val), &data.regs->reg),				\
114 									\
115 	di_write_wait((val), #reg)					\
116 )
117 static int di_write_wait(u32 val, const char *reg)
118 {
119 	int cnt;
120 	int ret = 0;
121 	int rc = 0;
122 
123 	/* wait for the write to finish */
124 	for (cnt = 0; cnt < 100; cnt++) {
125 		if ((__raw_readl(&data.regs->dsr) & (DSR_WCF | DSR_WEF)) != 0) {
126 			ret = 1;
127 			break;
128 		}
129 		udelay(10);
130 	}
131 	if (ret == 0)
132 		printf("### Warning: RTC - Write-wait timeout "
133 				"val = 0x%.8x reg = %s\n", val, reg);
134 
135 	/* check for write error */
136 	if (__raw_readl(&data.regs->dsr) & DSR_WEF) {
137 		clear_write_error();
138 		rc = -1;
139 	}
140 
141 	return rc;
142 }
143 
144 /*
145  * Initialize dryice hardware
146  */
147 static int di_init(void)
148 {
149 	int rc = 0;
150 
151 	data.regs = (struct imxdi_regs __iomem *)IMX_DRYICE_BASE;
152 
153 	/* mask all interrupts */
154 	__raw_writel(0, &data.regs->dier);
155 
156 	/* put dryice into valid state */
157 	if (__raw_readl(&data.regs->dsr) & DSR_NVF) {
158 		rc = DI_WRITE_WAIT(DSR_NVF | DSR_SVF, dsr);
159 		if (rc)
160 			goto err;
161 	}
162 
163 	/* initialize alarm */
164 	rc = DI_WRITE_WAIT(DCAMR_UNSET, dcamr);
165 	if (rc)
166 		goto err;
167 	rc = DI_WRITE_WAIT(0, dcalr);
168 	if (rc)
169 		goto err;
170 
171 	/* clear alarm flag */
172 	if (__raw_readl(&data.regs->dsr) & DSR_CAF) {
173 		rc = DI_WRITE_WAIT(DSR_CAF, dsr);
174 		if (rc)
175 			goto err;
176 	}
177 
178 	/* the timer won't count if it has never been written to */
179 	if (__raw_readl(&data.regs->dtcmr) == 0) {
180 		rc = DI_WRITE_WAIT(0, dtcmr);
181 		if (rc)
182 			goto err;
183 	}
184 
185 	/* start keeping time */
186 	if (!(__raw_readl(&data.regs->dcr) & DCR_TCE)) {
187 		rc = DI_WRITE_WAIT(__raw_readl(&data.regs->dcr) | DCR_TCE, dcr);
188 		if (rc)
189 			goto err;
190 	}
191 
192 	data.init_done = 1;
193 	return 0;
194 
195 err:
196 	return rc;
197 }
198 
199 int rtc_get(struct rtc_time *tmp)
200 {
201 	unsigned long now;
202 	int rc = 0;
203 
204 	if (!data.init_done) {
205 		rc = di_init();
206 		if (rc)
207 			goto err;
208 	}
209 
210 	now = __raw_readl(&data.regs->dtcmr);
211 	to_tm(now, tmp);
212 
213 err:
214 	return rc;
215 }
216 
217 int rtc_set(struct rtc_time *tmp)
218 {
219 	unsigned long now;
220 	int rc;
221 
222 	if (!data.init_done) {
223 		rc = di_init();
224 		if (rc)
225 			goto err;
226 	}
227 
228 	now = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday,
229 		     tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
230 	/* zero the fractional part first */
231 	rc = DI_WRITE_WAIT(0, dtclr);
232 	if (rc == 0)
233 		rc = DI_WRITE_WAIT(now, dtcmr);
234 
235 err:
236 	return rc;
237 }
238 
239 void rtc_reset(void)
240 {
241 	di_init();
242 }
243 
244 #endif
245