1 /* 2 * (C) Copyright 2001, 2002, 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * Keith Outwater, keith_outwater@mvis.com` 5 * Steven Scholz, steven.scholz@imc-berlin.de 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) 28 * DS1374 Real Time Clock (RTC). 29 * 30 * based on ds1337.c 31 */ 32 33 #include <common.h> 34 #include <command.h> 35 #include <rtc.h> 36 #include <i2c.h> 37 38 #if (defined(CONFIG_RTC_DS1374)) && defined(CONFIG_CMD_DATE) 39 40 /*---------------------------------------------------------------------*/ 41 #undef DEBUG_RTC 42 #define DEBUG_RTC 43 44 #ifdef DEBUG_RTC 45 #define DEBUGR(fmt,args...) printf(fmt ,##args) 46 #else 47 #define DEBUGR(fmt,args...) 48 #endif 49 /*---------------------------------------------------------------------*/ 50 51 #ifndef CFG_I2C_RTC_ADDR 52 # define CFG_I2C_RTC_ADDR 0x68 53 #endif 54 55 #if defined(CONFIG_RTC_DS1374) && (CFG_I2C_SPEED > 400000) 56 # error The DS1374 is specified up to 400kHz in fast mode! 57 #endif 58 59 /* 60 * RTC register addresses 61 */ 62 #define RTC_TOD_CNT_BYTE0_ADDR 0x00 /* TimeOfDay */ 63 #define RTC_TOD_CNT_BYTE1_ADDR 0x01 64 #define RTC_TOD_CNT_BYTE2_ADDR 0x02 65 #define RTC_TOD_CNT_BYTE3_ADDR 0x03 66 67 #define RTC_WD_ALM_CNT_BYTE0_ADDR 0x04 68 #define RTC_WD_ALM_CNT_BYTE1_ADDR 0x05 69 #define RTC_WD_ALM_CNT_BYTE2_ADDR 0x06 70 71 #define RTC_CTL_ADDR 0x07 /* RTC-CoNTrol-register */ 72 #define RTC_SR_ADDR 0x08 /* RTC-StatusRegister */ 73 #define RTC_TCS_DS_ADDR 0x09 /* RTC-TrickleChargeSelect DiodeSelect-register */ 74 75 #define RTC_CTL_BIT_AIE (1<<0) /* Bit 0 - Alarm Interrupt enable */ 76 #define RTC_CTL_BIT_RS1 (1<<1) /* Bit 1/2 - Rate Select square wave output */ 77 #define RTC_CTL_BIT_RS2 (1<<2) /* Bit 2/2 - Rate Select square wave output */ 78 #define RTC_CTL_BIT_WDSTR (1<<3) /* Bit 3 - Watchdog Reset Steering */ 79 #define RTC_CTL_BIT_BBSQW (1<<4) /* Bit 4 - Battery-Backed Square-Wave */ 80 #define RTC_CTL_BIT_WD_ALM (1<<5) /* Bit 5 - Watchdoc/Alarm Counter Select */ 81 #define RTC_CTL_BIT_WACE (1<<6) /* Bit 6 - Watchdog/Alarm Counter Enable WACE*/ 82 #define RTC_CTL_BIT_EN_OSC (1<<7) /* Bit 7 - Enable Oscilator */ 83 84 #define RTC_SR_BIT_AF 0x01 /* Bit 0 = Alarm Flag */ 85 #define RTC_SR_BIT_OSF 0x80 /* Bit 7 - Osc Stop Flag */ 86 87 typedef unsigned char boolean_t; 88 89 #ifndef TRUE 90 #define TRUE ((boolean_t)(0==0)) 91 #endif 92 #ifndef FALSE 93 #define FALSE (!TRUE) 94 #endif 95 96 const char RtcTodAddr[] = { 97 RTC_TOD_CNT_BYTE0_ADDR, 98 RTC_TOD_CNT_BYTE1_ADDR, 99 RTC_TOD_CNT_BYTE2_ADDR, 100 RTC_TOD_CNT_BYTE3_ADDR 101 }; 102 103 static uchar rtc_read (uchar reg); 104 static void rtc_write (uchar reg, uchar val, boolean_t set); 105 static void rtc_write_raw (uchar reg, uchar val); 106 107 /* 108 * Get the current time from the RTC 109 */ 110 void rtc_get (struct rtc_time *tm){ 111 112 unsigned long time1, time2; 113 unsigned int limit; 114 unsigned char tmp; 115 unsigned int i; 116 117 /* 118 * Since the reads are being performed one byte at a time, 119 * there is a chance that a carry will occur during the read. 120 * To detect this, 2 reads are performed and compared. 121 */ 122 limit = 10; 123 do { 124 i = 4; 125 time1 = 0; 126 while (i--) { 127 tmp = rtc_read(RtcTodAddr[i]); 128 time1 = (time1 << 8) | (tmp & 0xff); 129 } 130 131 i = 4; 132 time2 = 0; 133 while (i--) { 134 tmp = rtc_read(RtcTodAddr[i]); 135 time2 = (time2 << 8) | (tmp & 0xff); 136 } 137 } while ((time1 != time2) && limit--); 138 139 if (time1 != time2) { 140 printf("can't get consistent time from rtc chip\n"); 141 } 142 143 DEBUGR ("Get RTC s since 1.1.1970: %d\n", time1); 144 145 to_tm(time1, tm); /* To Gregorian Date */ 146 147 if (rtc_read(RTC_SR_ADDR) & RTC_SR_BIT_OSF) 148 printf ("### Warning: RTC oscillator has stopped\n"); 149 150 DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", 151 tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, 152 tm->tm_hour, tm->tm_min, tm->tm_sec); 153 } 154 155 /* 156 * Set the RTC 157 */ 158 void rtc_set (struct rtc_time *tmp){ 159 160 unsigned long time; 161 unsigned i; 162 163 DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", 164 tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, 165 tmp->tm_hour, tmp->tm_min, tmp->tm_sec); 166 167 if (tmp->tm_year < 1970 || tmp->tm_year > 2069) 168 printf("WARNING: year should be between 1970 and 2069!\n"); 169 170 time = mktime(tmp->tm_year, tmp->tm_mon, 171 tmp->tm_mday, tmp->tm_hour, 172 tmp->tm_min, tmp->tm_sec); 173 174 DEBUGR ("Set RTC s since 1.1.1970: %d (0x%02x)\n", time, time); 175 176 /* write to RTC_TOD_CNT_BYTEn_ADDR */ 177 for (i = 0; i <= 3; i++) { 178 rtc_write_raw(RtcTodAddr[i], (unsigned char)(time & 0xff)); 179 time = time >> 8; 180 } 181 182 /* Start clock */ 183 rtc_write(RTC_CTL_ADDR, RTC_CTL_BIT_EN_OSC, FALSE); 184 } 185 186 /* 187 * Reset the RTC. We setting the date back to 1970-01-01. 188 * We also enable the oscillator output on the SQW/OUT pin and program 189 * it for 32,768 Hz output. Note that according to the datasheet, turning 190 * on the square wave output increases the current drain on the backup 191 * battery to something between 480nA and 800nA. 192 */ 193 void rtc_reset (void){ 194 195 struct rtc_time tmp; 196 197 /* clear status flags */ 198 rtc_write (RTC_SR_ADDR, (RTC_SR_BIT_AF|RTC_SR_BIT_OSF), FALSE); /* clearing OSF and AF */ 199 200 /* Initialise DS1374 oriented to MPC8349E-ADS */ 201 rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_EN_OSC 202 |RTC_CTL_BIT_WACE 203 |RTC_CTL_BIT_AIE), FALSE);/* start osc, disable WACE, clear AIE 204 - set to 0 */ 205 rtc_write (RTC_CTL_ADDR, (RTC_CTL_BIT_WD_ALM 206 |RTC_CTL_BIT_WDSTR 207 |RTC_CTL_BIT_RS1 208 |RTC_CTL_BIT_RS2 209 |RTC_CTL_BIT_BBSQW), TRUE);/* disable WD/ALM, WDSTR set to INT-pin, 210 set BBSQW and SQW to 32k 211 - set to 1 */ 212 tmp.tm_year = 1970; 213 tmp.tm_mon = 1; 214 tmp.tm_mday= 1; 215 tmp.tm_hour = 0; 216 tmp.tm_min = 0; 217 tmp.tm_sec = 0; 218 219 rtc_set(&tmp); 220 221 printf("RTC: %4d-%02d-%02d %2d:%02d:%02d UTC\n", 222 tmp.tm_year, tmp.tm_mon, tmp.tm_mday, 223 tmp.tm_hour, tmp.tm_min, tmp.tm_sec); 224 225 rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAC, TRUE); 226 rtc_write(RTC_WD_ALM_CNT_BYTE1_ADDR,0xDE, TRUE); 227 rtc_write(RTC_WD_ALM_CNT_BYTE2_ADDR,0xAD, TRUE); 228 } 229 230 /* 231 * Helper functions 232 */ 233 static uchar rtc_read (uchar reg) 234 { 235 return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg)); 236 } 237 238 static void rtc_write (uchar reg, uchar val, boolean_t set) 239 { 240 if (set == TRUE) { 241 val |= i2c_reg_read (CFG_I2C_RTC_ADDR, reg); 242 i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); 243 } else { 244 val = i2c_reg_read (CFG_I2C_RTC_ADDR, reg) & ~val; 245 i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); 246 } 247 } 248 249 static void rtc_write_raw (uchar reg, uchar val) 250 { 251 i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); 252 } 253 #endif 254