1 /* 2 * (C) Copyright 2010 3 * Reinhard Meyer, reinhard.meyer@emk-elektronik.de 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 /* 9 * Date & Time support for the internal Real-time Timer 10 * of AT91SAM9260 and compatibles. 11 * Compatible with the LinuX rtc driver workaround: 12 * The RTT cannot be written to, but only reset. 13 * The actual time is the sum of RTT and one of 14 * the four GPBR registers. 15 * 16 * The at91sam9260 has 4 GPBR (0-3). 17 * For their typical use see at91_gpbr.h ! 18 * 19 * make sure u-boot and kernel use the same GPBR ! 20 */ 21 22 #include <common.h> 23 #include <command.h> 24 #include <rtc.h> 25 #include <asm/io.h> 26 #include <asm/errno.h> 27 #include <asm/arch/hardware.h> 28 #include <asm/arch/at91_rtt.h> 29 #include <asm/arch/at91_gpbr.h> 30 31 #if defined(CONFIG_CMD_DATE) 32 33 int rtc_get (struct rtc_time *tmp) 34 { 35 at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT; 36 at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR; 37 ulong tim; 38 ulong tim2; 39 ulong off; 40 41 do { 42 tim = readl(&rtt->vr); 43 tim2 = readl(&rtt->vr); 44 } while (tim!=tim2); 45 off = readl(&gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]); 46 /* off==0 means time is invalid, but we ignore that */ 47 to_tm (tim+off, tmp); 48 return 0; 49 } 50 51 int rtc_set (struct rtc_time *tmp) 52 { 53 at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT; 54 at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR; 55 ulong tim; 56 57 tim = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, 58 tmp->tm_hour, tmp->tm_min, tmp->tm_sec); 59 60 /* clear alarm, set prescaler to 32768, clear counter */ 61 writel(32768+AT91_RTT_RTTRST, &rtt->mr); 62 writel(~0, &rtt->ar); 63 writel(tim, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]); 64 /* wait for counter clear to happen, takes less than a 1/32768th second */ 65 while (readl(&rtt->vr) != 0) 66 ; 67 return 0; 68 } 69 70 void rtc_reset (void) 71 { 72 at91_rtt_t *rtt = (at91_rtt_t *) ATMEL_BASE_RTT; 73 at91_gpbr_t *gpbr = (at91_gpbr_t *) ATMEL_BASE_GPBR; 74 75 /* clear alarm, set prescaler to 32768, clear counter */ 76 writel(32768+AT91_RTT_RTTRST, &rtt->mr); 77 writel(~0, &rtt->ar); 78 writel(0, &gpbr->reg[AT91_GPBR_INDEX_TIMEOFF]); 79 /* wait for counter clear to happen, takes less than a 1/32768th second */ 80 while (readl(&rtt->vr) != 0) 81 ; 82 } 83 84 #endif 85