xref: /openbmc/u-boot/drivers/qe/uec.c (revision 87a62bce)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2006-2011 Freescale Semiconductor, Inc.
4  *
5  * Dave Liu <daveliu@freescale.com>
6  */
7 
8 #include <common.h>
9 #include <net.h>
10 #include <malloc.h>
11 #include <linux/errno.h>
12 #include <asm/io.h>
13 #include <linux/immap_qe.h>
14 #include "uccf.h"
15 #include "uec.h"
16 #include "uec_phy.h"
17 #include "miiphy.h"
18 #include <fsl_qe.h>
19 #include <phy.h>
20 
21 /* Default UTBIPAR SMI address */
22 #ifndef CONFIG_UTBIPAR_INIT_TBIPA
23 #define CONFIG_UTBIPAR_INIT_TBIPA 0x1F
24 #endif
25 
26 static uec_info_t uec_info[] = {
27 #ifdef CONFIG_UEC_ETH1
28 	STD_UEC_INFO(1),	/* UEC1 */
29 #endif
30 #ifdef CONFIG_UEC_ETH2
31 	STD_UEC_INFO(2),	/* UEC2 */
32 #endif
33 #ifdef CONFIG_UEC_ETH3
34 	STD_UEC_INFO(3),	/* UEC3 */
35 #endif
36 #ifdef CONFIG_UEC_ETH4
37 	STD_UEC_INFO(4),	/* UEC4 */
38 #endif
39 #ifdef CONFIG_UEC_ETH5
40 	STD_UEC_INFO(5),	/* UEC5 */
41 #endif
42 #ifdef CONFIG_UEC_ETH6
43 	STD_UEC_INFO(6),	/* UEC6 */
44 #endif
45 #ifdef CONFIG_UEC_ETH7
46 	STD_UEC_INFO(7),	/* UEC7 */
47 #endif
48 #ifdef CONFIG_UEC_ETH8
49 	STD_UEC_INFO(8),	/* UEC8 */
50 #endif
51 };
52 
53 #define MAXCONTROLLERS	(8)
54 
55 static struct eth_device *devlist[MAXCONTROLLERS];
56 
57 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
58 {
59 	uec_t		*uec_regs;
60 	u32		maccfg1;
61 
62 	if (!uec) {
63 		printf("%s: uec not initial\n", __FUNCTION__);
64 		return -EINVAL;
65 	}
66 	uec_regs = uec->uec_regs;
67 
68 	maccfg1 = in_be32(&uec_regs->maccfg1);
69 
70 	if (mode & COMM_DIR_TX)	{
71 		maccfg1 |= MACCFG1_ENABLE_TX;
72 		out_be32(&uec_regs->maccfg1, maccfg1);
73 		uec->mac_tx_enabled = 1;
74 	}
75 
76 	if (mode & COMM_DIR_RX)	{
77 		maccfg1 |= MACCFG1_ENABLE_RX;
78 		out_be32(&uec_regs->maccfg1, maccfg1);
79 		uec->mac_rx_enabled = 1;
80 	}
81 
82 	return 0;
83 }
84 
85 static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
86 {
87 	uec_t		*uec_regs;
88 	u32		maccfg1;
89 
90 	if (!uec) {
91 		printf("%s: uec not initial\n", __FUNCTION__);
92 		return -EINVAL;
93 	}
94 	uec_regs = uec->uec_regs;
95 
96 	maccfg1 = in_be32(&uec_regs->maccfg1);
97 
98 	if (mode & COMM_DIR_TX)	{
99 		maccfg1 &= ~MACCFG1_ENABLE_TX;
100 		out_be32(&uec_regs->maccfg1, maccfg1);
101 		uec->mac_tx_enabled = 0;
102 	}
103 
104 	if (mode & COMM_DIR_RX)	{
105 		maccfg1 &= ~MACCFG1_ENABLE_RX;
106 		out_be32(&uec_regs->maccfg1, maccfg1);
107 		uec->mac_rx_enabled = 0;
108 	}
109 
110 	return 0;
111 }
112 
113 static int uec_graceful_stop_tx(uec_private_t *uec)
114 {
115 	ucc_fast_t		*uf_regs;
116 	u32			cecr_subblock;
117 	u32			ucce;
118 
119 	if (!uec || !uec->uccf) {
120 		printf("%s: No handle passed.\n", __FUNCTION__);
121 		return -EINVAL;
122 	}
123 
124 	uf_regs = uec->uccf->uf_regs;
125 
126 	/* Clear the grace stop event */
127 	out_be32(&uf_regs->ucce, UCCE_GRA);
128 
129 	/* Issue host command */
130 	cecr_subblock =
131 		 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
132 	qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
133 			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
134 
135 	/* Wait for command to complete */
136 	do {
137 		ucce = in_be32(&uf_regs->ucce);
138 	} while (! (ucce & UCCE_GRA));
139 
140 	uec->grace_stopped_tx = 1;
141 
142 	return 0;
143 }
144 
145 static int uec_graceful_stop_rx(uec_private_t *uec)
146 {
147 	u32		cecr_subblock;
148 	u8		ack;
149 
150 	if (!uec) {
151 		printf("%s: No handle passed.\n", __FUNCTION__);
152 		return -EINVAL;
153 	}
154 
155 	if (!uec->p_rx_glbl_pram) {
156 		printf("%s: No init rx global parameter\n", __FUNCTION__);
157 		return -EINVAL;
158 	}
159 
160 	/* Clear acknowledge bit */
161 	ack = uec->p_rx_glbl_pram->rxgstpack;
162 	ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
163 	uec->p_rx_glbl_pram->rxgstpack = ack;
164 
165 	/* Keep issuing cmd and checking ack bit until it is asserted */
166 	do {
167 		/* Issue host command */
168 		cecr_subblock =
169 		 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
170 		qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
171 				 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
172 		ack = uec->p_rx_glbl_pram->rxgstpack;
173 	} while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
174 
175 	uec->grace_stopped_rx = 1;
176 
177 	return 0;
178 }
179 
180 static int uec_restart_tx(uec_private_t *uec)
181 {
182 	u32		cecr_subblock;
183 
184 	if (!uec || !uec->uec_info) {
185 		printf("%s: No handle passed.\n", __FUNCTION__);
186 		return -EINVAL;
187 	}
188 
189 	cecr_subblock =
190 	 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
191 	qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
192 			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
193 
194 	uec->grace_stopped_tx = 0;
195 
196 	return 0;
197 }
198 
199 static int uec_restart_rx(uec_private_t *uec)
200 {
201 	u32		cecr_subblock;
202 
203 	if (!uec || !uec->uec_info) {
204 		printf("%s: No handle passed.\n", __FUNCTION__);
205 		return -EINVAL;
206 	}
207 
208 	cecr_subblock =
209 	 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
210 	qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
211 			 (u8)QE_CR_PROTOCOL_ETHERNET, 0);
212 
213 	uec->grace_stopped_rx = 0;
214 
215 	return 0;
216 }
217 
218 static int uec_open(uec_private_t *uec, comm_dir_e mode)
219 {
220 	ucc_fast_private_t	*uccf;
221 
222 	if (!uec || !uec->uccf) {
223 		printf("%s: No handle passed.\n", __FUNCTION__);
224 		return -EINVAL;
225 	}
226 	uccf = uec->uccf;
227 
228 	/* check if the UCC number is in range. */
229 	if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
230 		printf("%s: ucc_num out of range.\n", __FUNCTION__);
231 		return -EINVAL;
232 	}
233 
234 	/* Enable MAC */
235 	uec_mac_enable(uec, mode);
236 
237 	/* Enable UCC fast */
238 	ucc_fast_enable(uccf, mode);
239 
240 	/* RISC microcode start */
241 	if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
242 		uec_restart_tx(uec);
243 	}
244 	if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
245 		uec_restart_rx(uec);
246 	}
247 
248 	return 0;
249 }
250 
251 static int uec_stop(uec_private_t *uec, comm_dir_e mode)
252 {
253 	if (!uec || !uec->uccf) {
254 		printf("%s: No handle passed.\n", __FUNCTION__);
255 		return -EINVAL;
256 	}
257 
258 	/* check if the UCC number is in range. */
259 	if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
260 		printf("%s: ucc_num out of range.\n", __FUNCTION__);
261 		return -EINVAL;
262 	}
263 	/* Stop any transmissions */
264 	if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
265 		uec_graceful_stop_tx(uec);
266 	}
267 	/* Stop any receptions */
268 	if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
269 		uec_graceful_stop_rx(uec);
270 	}
271 
272 	/* Disable the UCC fast */
273 	ucc_fast_disable(uec->uccf, mode);
274 
275 	/* Disable the MAC */
276 	uec_mac_disable(uec, mode);
277 
278 	return 0;
279 }
280 
281 static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
282 {
283 	uec_t		*uec_regs;
284 	u32		maccfg2;
285 
286 	if (!uec) {
287 		printf("%s: uec not initial\n", __FUNCTION__);
288 		return -EINVAL;
289 	}
290 	uec_regs = uec->uec_regs;
291 
292 	if (duplex == DUPLEX_HALF) {
293 		maccfg2 = in_be32(&uec_regs->maccfg2);
294 		maccfg2 &= ~MACCFG2_FDX;
295 		out_be32(&uec_regs->maccfg2, maccfg2);
296 	}
297 
298 	if (duplex == DUPLEX_FULL) {
299 		maccfg2 = in_be32(&uec_regs->maccfg2);
300 		maccfg2 |= MACCFG2_FDX;
301 		out_be32(&uec_regs->maccfg2, maccfg2);
302 	}
303 
304 	return 0;
305 }
306 
307 static int uec_set_mac_if_mode(uec_private_t *uec,
308 		phy_interface_t if_mode, int speed)
309 {
310 	phy_interface_t		enet_if_mode;
311 	uec_t			*uec_regs;
312 	u32			upsmr;
313 	u32			maccfg2;
314 
315 	if (!uec) {
316 		printf("%s: uec not initial\n", __FUNCTION__);
317 		return -EINVAL;
318 	}
319 
320 	uec_regs = uec->uec_regs;
321 	enet_if_mode = if_mode;
322 
323 	maccfg2 = in_be32(&uec_regs->maccfg2);
324 	maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
325 
326 	upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
327 	upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
328 
329 	switch (speed) {
330 		case SPEED_10:
331 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
332 			switch (enet_if_mode) {
333 				case PHY_INTERFACE_MODE_MII:
334 					break;
335 				case PHY_INTERFACE_MODE_RGMII:
336 					upsmr |= (UPSMR_RPM | UPSMR_R10M);
337 					break;
338 				case PHY_INTERFACE_MODE_RMII:
339 					upsmr |= (UPSMR_R10M | UPSMR_RMM);
340 					break;
341 				default:
342 					return -EINVAL;
343 					break;
344 			}
345 			break;
346 		case SPEED_100:
347 			maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
348 			switch (enet_if_mode) {
349 				case PHY_INTERFACE_MODE_MII:
350 					break;
351 				case PHY_INTERFACE_MODE_RGMII:
352 					upsmr |= UPSMR_RPM;
353 					break;
354 				case PHY_INTERFACE_MODE_RMII:
355 					upsmr |= UPSMR_RMM;
356 					break;
357 				default:
358 					return -EINVAL;
359 					break;
360 			}
361 			break;
362 		case SPEED_1000:
363 			maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
364 			switch (enet_if_mode) {
365 				case PHY_INTERFACE_MODE_GMII:
366 					break;
367 				case PHY_INTERFACE_MODE_TBI:
368 					upsmr |= UPSMR_TBIM;
369 					break;
370 				case PHY_INTERFACE_MODE_RTBI:
371 					upsmr |= (UPSMR_RPM | UPSMR_TBIM);
372 					break;
373 				case PHY_INTERFACE_MODE_RGMII_RXID:
374 				case PHY_INTERFACE_MODE_RGMII_TXID:
375 				case PHY_INTERFACE_MODE_RGMII_ID:
376 				case PHY_INTERFACE_MODE_RGMII:
377 					upsmr |= UPSMR_RPM;
378 					break;
379 				case PHY_INTERFACE_MODE_SGMII:
380 					upsmr |= UPSMR_SGMM;
381 					break;
382 				default:
383 					return -EINVAL;
384 					break;
385 			}
386 			break;
387 		default:
388 			return -EINVAL;
389 			break;
390 	}
391 
392 	out_be32(&uec_regs->maccfg2, maccfg2);
393 	out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
394 
395 	return 0;
396 }
397 
398 static int init_mii_management_configuration(uec_mii_t *uec_mii_regs)
399 {
400 	uint		timeout = 0x1000;
401 	u32		miimcfg = 0;
402 
403 	miimcfg = in_be32(&uec_mii_regs->miimcfg);
404 	miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
405 	out_be32(&uec_mii_regs->miimcfg, miimcfg);
406 
407 	/* Wait until the bus is free */
408 	while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
409 	if (timeout <= 0) {
410 		printf("%s: The MII Bus is stuck!", __FUNCTION__);
411 		return -ETIMEDOUT;
412 	}
413 
414 	return 0;
415 }
416 
417 static int init_phy(struct eth_device *dev)
418 {
419 	uec_private_t		*uec;
420 	uec_mii_t		*umii_regs;
421 	struct uec_mii_info	*mii_info;
422 	struct phy_info		*curphy;
423 	int			err;
424 
425 	uec = (uec_private_t *)dev->priv;
426 	umii_regs = uec->uec_mii_regs;
427 
428 	uec->oldlink = 0;
429 	uec->oldspeed = 0;
430 	uec->oldduplex = -1;
431 
432 	mii_info = malloc(sizeof(*mii_info));
433 	if (!mii_info) {
434 		printf("%s: Could not allocate mii_info", dev->name);
435 		return -ENOMEM;
436 	}
437 	memset(mii_info, 0, sizeof(*mii_info));
438 
439 	if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
440 		mii_info->speed = SPEED_1000;
441 	} else {
442 		mii_info->speed = SPEED_100;
443 	}
444 
445 	mii_info->duplex = DUPLEX_FULL;
446 	mii_info->pause = 0;
447 	mii_info->link = 1;
448 
449 	mii_info->advertising = (ADVERTISED_10baseT_Half |
450 				ADVERTISED_10baseT_Full |
451 				ADVERTISED_100baseT_Half |
452 				ADVERTISED_100baseT_Full |
453 				ADVERTISED_1000baseT_Full);
454 	mii_info->autoneg = 1;
455 	mii_info->mii_id = uec->uec_info->phy_address;
456 	mii_info->dev = dev;
457 
458 	mii_info->mdio_read = &uec_read_phy_reg;
459 	mii_info->mdio_write = &uec_write_phy_reg;
460 
461 	uec->mii_info = mii_info;
462 
463 	qe_set_mii_clk_src(uec->uec_info->uf_info.ucc_num);
464 
465 	if (init_mii_management_configuration(umii_regs)) {
466 		printf("%s: The MII Bus is stuck!", dev->name);
467 		err = -1;
468 		goto bus_fail;
469 	}
470 
471 	/* get info for this PHY */
472 	curphy = uec_get_phy_info(uec->mii_info);
473 	if (!curphy) {
474 		printf("%s: No PHY found", dev->name);
475 		err = -1;
476 		goto no_phy;
477 	}
478 
479 	mii_info->phyinfo = curphy;
480 
481 	/* Run the commands which initialize the PHY */
482 	if (curphy->init) {
483 		err = curphy->init(uec->mii_info);
484 		if (err)
485 			goto phy_init_fail;
486 	}
487 
488 	return 0;
489 
490 phy_init_fail:
491 no_phy:
492 bus_fail:
493 	free(mii_info);
494 	return err;
495 }
496 
497 static void adjust_link(struct eth_device *dev)
498 {
499 	uec_private_t		*uec = (uec_private_t *)dev->priv;
500 	struct uec_mii_info	*mii_info = uec->mii_info;
501 
502 	extern void change_phy_interface_mode(struct eth_device *dev,
503 				 phy_interface_t mode, int speed);
504 
505 	if (mii_info->link) {
506 		/* Now we make sure that we can be in full duplex mode.
507 		* If not, we operate in half-duplex mode. */
508 		if (mii_info->duplex != uec->oldduplex) {
509 			if (!(mii_info->duplex)) {
510 				uec_set_mac_duplex(uec, DUPLEX_HALF);
511 				printf("%s: Half Duplex\n", dev->name);
512 			} else {
513 				uec_set_mac_duplex(uec, DUPLEX_FULL);
514 				printf("%s: Full Duplex\n", dev->name);
515 			}
516 			uec->oldduplex = mii_info->duplex;
517 		}
518 
519 		if (mii_info->speed != uec->oldspeed) {
520 			phy_interface_t mode =
521 				uec->uec_info->enet_interface_type;
522 			if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
523 				switch (mii_info->speed) {
524 				case SPEED_1000:
525 					break;
526 				case SPEED_100:
527 					printf ("switching to rgmii 100\n");
528 					mode = PHY_INTERFACE_MODE_RGMII;
529 					break;
530 				case SPEED_10:
531 					printf ("switching to rgmii 10\n");
532 					mode = PHY_INTERFACE_MODE_RGMII;
533 					break;
534 				default:
535 					printf("%s: Ack,Speed(%d)is illegal\n",
536 						dev->name, mii_info->speed);
537 					break;
538 				}
539 			}
540 
541 			/* change phy */
542 			change_phy_interface_mode(dev, mode, mii_info->speed);
543 			/* change the MAC interface mode */
544 			uec_set_mac_if_mode(uec, mode, mii_info->speed);
545 
546 			printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
547 			uec->oldspeed = mii_info->speed;
548 		}
549 
550 		if (!uec->oldlink) {
551 			printf("%s: Link is up\n", dev->name);
552 			uec->oldlink = 1;
553 		}
554 
555 	} else { /* if (mii_info->link) */
556 		if (uec->oldlink) {
557 			printf("%s: Link is down\n", dev->name);
558 			uec->oldlink = 0;
559 			uec->oldspeed = 0;
560 			uec->oldduplex = -1;
561 		}
562 	}
563 }
564 
565 static void phy_change(struct eth_device *dev)
566 {
567 	uec_private_t	*uec = (uec_private_t *)dev->priv;
568 
569 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
570 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
571 
572 	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
573 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
574 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
575 #endif
576 
577 	/* Update the link, speed, duplex */
578 	uec->mii_info->phyinfo->read_status(uec->mii_info);
579 
580 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
581 	/*
582 	 * QE12 is muxed with LBCTL, it needs to be released for enabling
583 	 * LBCTL signal for LBC usage.
584 	 */
585 	clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
586 #endif
587 
588 	/* Adjust the interface according to speed */
589 	adjust_link(dev);
590 }
591 
592 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
593 
594 /*
595  * Find a device index from the devlist by name
596  *
597  * Returns:
598  *  The index where the device is located, -1 on error
599  */
600 static int uec_miiphy_find_dev_by_name(const char *devname)
601 {
602 	int i;
603 
604 	for (i = 0; i < MAXCONTROLLERS; i++) {
605 		if (strncmp(devname, devlist[i]->name, strlen(devname)) == 0) {
606 			break;
607 		}
608 	}
609 
610 	/* If device cannot be found, returns -1 */
611 	if (i == MAXCONTROLLERS) {
612 		debug ("%s: device %s not found in devlist\n", __FUNCTION__, devname);
613 		i = -1;
614 	}
615 
616 	return i;
617 }
618 
619 /*
620  * Read a MII PHY register.
621  *
622  * Returns:
623  *  0 on success
624  */
625 static int uec_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
626 {
627 	unsigned short value = 0;
628 	int devindex = 0;
629 
630 	if (bus->name == NULL) {
631 		debug("%s: NULL pointer given\n", __FUNCTION__);
632 	} else {
633 		devindex = uec_miiphy_find_dev_by_name(bus->name);
634 		if (devindex >= 0) {
635 			value = uec_read_phy_reg(devlist[devindex], addr, reg);
636 		}
637 	}
638 	return value;
639 }
640 
641 /*
642  * Write a MII PHY register.
643  *
644  * Returns:
645  *  0 on success
646  */
647 static int uec_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg,
648 			    u16 value)
649 {
650 	int devindex = 0;
651 
652 	if (bus->name == NULL) {
653 		debug("%s: NULL pointer given\n", __FUNCTION__);
654 	} else {
655 		devindex = uec_miiphy_find_dev_by_name(bus->name);
656 		if (devindex >= 0) {
657 			uec_write_phy_reg(devlist[devindex], addr, reg, value);
658 		}
659 	}
660 	return 0;
661 }
662 #endif
663 
664 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
665 {
666 	uec_t		*uec_regs;
667 	u32		mac_addr1;
668 	u32		mac_addr2;
669 
670 	if (!uec) {
671 		printf("%s: uec not initial\n", __FUNCTION__);
672 		return -EINVAL;
673 	}
674 
675 	uec_regs = uec->uec_regs;
676 
677 	/* if a station address of 0x12345678ABCD, perform a write to
678 	MACSTNADDR1 of 0xCDAB7856,
679 	MACSTNADDR2 of 0x34120000 */
680 
681 	mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
682 			(mac_addr[3] << 8)  | (mac_addr[2]);
683 	out_be32(&uec_regs->macstnaddr1, mac_addr1);
684 
685 	mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
686 	out_be32(&uec_regs->macstnaddr2, mac_addr2);
687 
688 	return 0;
689 }
690 
691 static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
692 					 int *threads_num_ret)
693 {
694 	int	num_threads_numerica;
695 
696 	switch (threads_num) {
697 		case UEC_NUM_OF_THREADS_1:
698 			num_threads_numerica = 1;
699 			break;
700 		case UEC_NUM_OF_THREADS_2:
701 			num_threads_numerica = 2;
702 			break;
703 		case UEC_NUM_OF_THREADS_4:
704 			num_threads_numerica = 4;
705 			break;
706 		case UEC_NUM_OF_THREADS_6:
707 			num_threads_numerica = 6;
708 			break;
709 		case UEC_NUM_OF_THREADS_8:
710 			num_threads_numerica = 8;
711 			break;
712 		default:
713 			printf("%s: Bad number of threads value.",
714 				 __FUNCTION__);
715 			return -EINVAL;
716 	}
717 
718 	*threads_num_ret = num_threads_numerica;
719 
720 	return 0;
721 }
722 
723 static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
724 {
725 	uec_info_t	*uec_info;
726 	u32		end_bd;
727 	u8		bmrx = 0;
728 	int		i;
729 
730 	uec_info = uec->uec_info;
731 
732 	/* Alloc global Tx parameter RAM page */
733 	uec->tx_glbl_pram_offset = qe_muram_alloc(
734 				sizeof(uec_tx_global_pram_t),
735 				 UEC_TX_GLOBAL_PRAM_ALIGNMENT);
736 	uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
737 				qe_muram_addr(uec->tx_glbl_pram_offset);
738 
739 	/* Zero the global Tx prameter RAM */
740 	memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
741 
742 	/* Init global Tx parameter RAM */
743 
744 	/* TEMODER, RMON statistics disable, one Tx queue */
745 	out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
746 
747 	/* SQPTR */
748 	uec->send_q_mem_reg_offset = qe_muram_alloc(
749 				sizeof(uec_send_queue_qd_t),
750 				 UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
751 	uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
752 				qe_muram_addr(uec->send_q_mem_reg_offset);
753 	out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
754 
755 	/* Setup the table with TxBDs ring */
756 	end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
757 					 * SIZEOFBD;
758 	out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
759 				 (u32)(uec->p_tx_bd_ring));
760 	out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
761 						 end_bd);
762 
763 	/* Scheduler Base Pointer, we have only one Tx queue, no need it */
764 	out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
765 
766 	/* TxRMON Base Pointer, TxRMON disable, we don't need it */
767 	out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
768 
769 	/* TSTATE, global snooping, big endian, the CSB bus selected */
770 	bmrx = BMR_INIT_VALUE;
771 	out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
772 
773 	/* IPH_Offset */
774 	for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
775 		out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
776 	}
777 
778 	/* VTAG table */
779 	for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
780 		out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
781 	}
782 
783 	/* TQPTR */
784 	uec->thread_dat_tx_offset = qe_muram_alloc(
785 		num_threads_tx * sizeof(uec_thread_data_tx_t) +
786 		 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
787 
788 	uec->p_thread_data_tx = (uec_thread_data_tx_t *)
789 				qe_muram_addr(uec->thread_dat_tx_offset);
790 	out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
791 }
792 
793 static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
794 {
795 	u8	bmrx = 0;
796 	int	i;
797 	uec_82xx_address_filtering_pram_t	*p_af_pram;
798 
799 	/* Allocate global Rx parameter RAM page */
800 	uec->rx_glbl_pram_offset = qe_muram_alloc(
801 		sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
802 	uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
803 				qe_muram_addr(uec->rx_glbl_pram_offset);
804 
805 	/* Zero Global Rx parameter RAM */
806 	memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
807 
808 	/* Init global Rx parameter RAM */
809 	/* REMODER, Extended feature mode disable, VLAN disable,
810 	 LossLess flow control disable, Receive firmware statisic disable,
811 	 Extended address parsing mode disable, One Rx queues,
812 	 Dynamic maximum/minimum frame length disable, IP checksum check
813 	 disable, IP address alignment disable
814 	*/
815 	out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
816 
817 	/* RQPTR */
818 	uec->thread_dat_rx_offset = qe_muram_alloc(
819 			num_threads_rx * sizeof(uec_thread_data_rx_t),
820 			 UEC_THREAD_DATA_ALIGNMENT);
821 	uec->p_thread_data_rx = (uec_thread_data_rx_t *)
822 				qe_muram_addr(uec->thread_dat_rx_offset);
823 	out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
824 
825 	/* Type_or_Len */
826 	out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
827 
828 	/* RxRMON base pointer, we don't need it */
829 	out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
830 
831 	/* IntCoalescingPTR, we don't need it, no interrupt */
832 	out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
833 
834 	/* RSTATE, global snooping, big endian, the CSB bus selected */
835 	bmrx = BMR_INIT_VALUE;
836 	out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
837 
838 	/* MRBLR */
839 	out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
840 
841 	/* RBDQPTR */
842 	uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
843 				sizeof(uec_rx_bd_queues_entry_t) + \
844 				sizeof(uec_rx_prefetched_bds_t),
845 				 UEC_RX_BD_QUEUES_ALIGNMENT);
846 	uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
847 				qe_muram_addr(uec->rx_bd_qs_tbl_offset);
848 
849 	/* Zero it */
850 	memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
851 					sizeof(uec_rx_prefetched_bds_t));
852 	out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
853 	out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
854 		 (u32)uec->p_rx_bd_ring);
855 
856 	/* MFLR */
857 	out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
858 	/* MINFLR */
859 	out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
860 	/* MAXD1 */
861 	out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
862 	/* MAXD2 */
863 	out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
864 	/* ECAM_PTR */
865 	out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
866 	/* L2QT */
867 	out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
868 	/* L3QT */
869 	for (i = 0; i < 8; i++)	{
870 		out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
871 	}
872 
873 	/* VLAN_TYPE */
874 	out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
875 	/* TCI */
876 	out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
877 
878 	/* Clear PQ2 style address filtering hash table */
879 	p_af_pram = (uec_82xx_address_filtering_pram_t *) \
880 			uec->p_rx_glbl_pram->addressfiltering;
881 
882 	p_af_pram->iaddr_h = 0;
883 	p_af_pram->iaddr_l = 0;
884 	p_af_pram->gaddr_h = 0;
885 	p_af_pram->gaddr_l = 0;
886 }
887 
888 static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
889 					 int thread_tx, int thread_rx)
890 {
891 	uec_init_cmd_pram_t		*p_init_enet_param;
892 	u32				init_enet_param_offset;
893 	uec_info_t			*uec_info;
894 	int				i;
895 	int				snum;
896 	u32				init_enet_offset;
897 	u32				entry_val;
898 	u32				command;
899 	u32				cecr_subblock;
900 
901 	uec_info = uec->uec_info;
902 
903 	/* Allocate init enet command parameter */
904 	uec->init_enet_param_offset = qe_muram_alloc(
905 					sizeof(uec_init_cmd_pram_t), 4);
906 	init_enet_param_offset = uec->init_enet_param_offset;
907 	uec->p_init_enet_param = (uec_init_cmd_pram_t *)
908 				qe_muram_addr(uec->init_enet_param_offset);
909 
910 	/* Zero init enet command struct */
911 	memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
912 
913 	/* Init the command struct */
914 	p_init_enet_param = uec->p_init_enet_param;
915 	p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
916 	p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
917 	p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
918 	p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
919 	p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
920 	p_init_enet_param->largestexternallookupkeysize = 0;
921 
922 	p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
923 					 << ENET_INIT_PARAM_RGF_SHIFT;
924 	p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
925 					 << ENET_INIT_PARAM_TGF_SHIFT;
926 
927 	/* Init Rx global parameter pointer */
928 	p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
929 						 (u32)uec_info->risc_rx;
930 
931 	/* Init Rx threads */
932 	for (i = 0; i < (thread_rx + 1); i++) {
933 		if ((snum = qe_get_snum()) < 0) {
934 			printf("%s can not get snum\n", __FUNCTION__);
935 			return -ENOMEM;
936 		}
937 
938 		if (i==0) {
939 			init_enet_offset = 0;
940 		} else {
941 			init_enet_offset = qe_muram_alloc(
942 					sizeof(uec_thread_rx_pram_t),
943 					 UEC_THREAD_RX_PRAM_ALIGNMENT);
944 		}
945 
946 		entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
947 				 init_enet_offset | (u32)uec_info->risc_rx;
948 		p_init_enet_param->rxthread[i] = entry_val;
949 	}
950 
951 	/* Init Tx global parameter pointer */
952 	p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
953 					 (u32)uec_info->risc_tx;
954 
955 	/* Init Tx threads */
956 	for (i = 0; i < thread_tx; i++) {
957 		if ((snum = qe_get_snum()) < 0)	{
958 			printf("%s can not get snum\n", __FUNCTION__);
959 			return -ENOMEM;
960 		}
961 
962 		init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
963 						 UEC_THREAD_TX_PRAM_ALIGNMENT);
964 
965 		entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
966 				 init_enet_offset | (u32)uec_info->risc_tx;
967 		p_init_enet_param->txthread[i] = entry_val;
968 	}
969 
970 	__asm__ __volatile__("sync");
971 
972 	/* Issue QE command */
973 	command = QE_INIT_TX_RX;
974 	cecr_subblock =	ucc_fast_get_qe_cr_subblock(
975 				uec->uec_info->uf_info.ucc_num);
976 	qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
977 						 init_enet_param_offset);
978 
979 	return 0;
980 }
981 
982 static int uec_startup(uec_private_t *uec)
983 {
984 	uec_info_t			*uec_info;
985 	ucc_fast_info_t			*uf_info;
986 	ucc_fast_private_t		*uccf;
987 	ucc_fast_t			*uf_regs;
988 	uec_t				*uec_regs;
989 	int				num_threads_tx;
990 	int				num_threads_rx;
991 	u32				utbipar;
992 	u32				length;
993 	u32				align;
994 	qe_bd_t				*bd;
995 	u8				*buf;
996 	int				i;
997 
998 	if (!uec || !uec->uec_info) {
999 		printf("%s: uec or uec_info not initial\n", __FUNCTION__);
1000 		return -EINVAL;
1001 	}
1002 
1003 	uec_info = uec->uec_info;
1004 	uf_info = &(uec_info->uf_info);
1005 
1006 	/* Check if Rx BD ring len is illegal */
1007 	if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
1008 		(uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
1009 		printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
1010 			 __FUNCTION__);
1011 		return -EINVAL;
1012 	}
1013 
1014 	/* Check if Tx BD ring len is illegal */
1015 	if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
1016 		printf("%s: Tx BD ring length must not be smaller than 2.\n",
1017 			 __FUNCTION__);
1018 		return -EINVAL;
1019 	}
1020 
1021 	/* Check if MRBLR is illegal */
1022 	if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN  % UEC_MRBLR_ALIGNMENT)) {
1023 		printf("%s: max rx buffer length must be mutliple of 128.\n",
1024 			 __FUNCTION__);
1025 		return -EINVAL;
1026 	}
1027 
1028 	/* Both Rx and Tx are stopped */
1029 	uec->grace_stopped_rx = 1;
1030 	uec->grace_stopped_tx = 1;
1031 
1032 	/* Init UCC fast */
1033 	if (ucc_fast_init(uf_info, &uccf)) {
1034 		printf("%s: failed to init ucc fast\n", __FUNCTION__);
1035 		return -ENOMEM;
1036 	}
1037 
1038 	/* Save uccf */
1039 	uec->uccf = uccf;
1040 
1041 	/* Convert the Tx threads number */
1042 	if (uec_convert_threads_num(uec_info->num_threads_tx,
1043 					 &num_threads_tx)) {
1044 		return -EINVAL;
1045 	}
1046 
1047 	/* Convert the Rx threads number */
1048 	if (uec_convert_threads_num(uec_info->num_threads_rx,
1049 					 &num_threads_rx)) {
1050 		return -EINVAL;
1051 	}
1052 
1053 	uf_regs = uccf->uf_regs;
1054 
1055 	/* UEC register is following UCC fast registers */
1056 	uec_regs = (uec_t *)(&uf_regs->ucc_eth);
1057 
1058 	/* Save the UEC register pointer to UEC private struct */
1059 	uec->uec_regs = uec_regs;
1060 
1061 	/* Init UPSMR, enable hardware statistics (UCC) */
1062 	out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
1063 
1064 	/* Init MACCFG1, flow control disable, disable Tx and Rx */
1065 	out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
1066 
1067 	/* Init MACCFG2, length check, MAC PAD and CRC enable */
1068 	out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
1069 
1070 	/* Setup MAC interface mode */
1071 	uec_set_mac_if_mode(uec, uec_info->enet_interface_type, uec_info->speed);
1072 
1073 	/* Setup MII management base */
1074 #ifndef CONFIG_eTSEC_MDIO_BUS
1075 	uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg);
1076 #else
1077 	uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS;
1078 #endif
1079 
1080 	/* Setup MII master clock source */
1081 	qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
1082 
1083 	/* Setup UTBIPAR */
1084 	utbipar = in_be32(&uec_regs->utbipar);
1085 	utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
1086 
1087 	/* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC.
1088 	 * This frees up the remaining SMI addresses for use.
1089 	 */
1090 	utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT;
1091 	out_be32(&uec_regs->utbipar, utbipar);
1092 
1093 	/* Configure the TBI for SGMII operation */
1094 	if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
1095 	   (uec->uec_info->speed == SPEED_1000)) {
1096 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
1097 			ENET_TBI_MII_ANA, TBIANA_SETTINGS);
1098 
1099 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
1100 			ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
1101 
1102 		uec_write_phy_reg(uec->dev, uec_regs->utbipar,
1103 			ENET_TBI_MII_CR, TBICR_SETTINGS);
1104 	}
1105 
1106 	/* Allocate Tx BDs */
1107 	length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
1108 		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
1109 		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
1110 	if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
1111 		 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) {
1112 		length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
1113 	}
1114 
1115 	align = UEC_TX_BD_RING_ALIGNMENT;
1116 	uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
1117 	if (uec->tx_bd_ring_offset != 0) {
1118 		uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
1119 						 & ~(align - 1));
1120 	}
1121 
1122 	/* Zero all of Tx BDs */
1123 	memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
1124 
1125 	/* Allocate Rx BDs */
1126 	length = uec_info->rx_bd_ring_len * SIZEOFBD;
1127 	align = UEC_RX_BD_RING_ALIGNMENT;
1128 	uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
1129 	if (uec->rx_bd_ring_offset != 0) {
1130 		uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
1131 							 & ~(align - 1));
1132 	}
1133 
1134 	/* Zero all of Rx BDs */
1135 	memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
1136 
1137 	/* Allocate Rx buffer */
1138 	length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
1139 	align = UEC_RX_DATA_BUF_ALIGNMENT;
1140 	uec->rx_buf_offset = (u32)malloc(length + align);
1141 	if (uec->rx_buf_offset != 0) {
1142 		uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
1143 						 & ~(align - 1));
1144 	}
1145 
1146 	/* Zero all of the Rx buffer */
1147 	memset((void *)(uec->rx_buf_offset), 0, length + align);
1148 
1149 	/* Init TxBD ring */
1150 	bd = (qe_bd_t *)uec->p_tx_bd_ring;
1151 	uec->txBd = bd;
1152 
1153 	for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
1154 		BD_DATA_CLEAR(bd);
1155 		BD_STATUS_SET(bd, 0);
1156 		BD_LENGTH_SET(bd, 0);
1157 		bd ++;
1158 	}
1159 	BD_STATUS_SET((--bd), TxBD_WRAP);
1160 
1161 	/* Init RxBD ring */
1162 	bd = (qe_bd_t *)uec->p_rx_bd_ring;
1163 	uec->rxBd = bd;
1164 	buf = uec->p_rx_buf;
1165 	for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
1166 		BD_DATA_SET(bd, buf);
1167 		BD_LENGTH_SET(bd, 0);
1168 		BD_STATUS_SET(bd, RxBD_EMPTY);
1169 		buf += MAX_RXBUF_LEN;
1170 		bd ++;
1171 	}
1172 	BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
1173 
1174 	/* Init global Tx parameter RAM */
1175 	uec_init_tx_parameter(uec, num_threads_tx);
1176 
1177 	/* Init global Rx parameter RAM */
1178 	uec_init_rx_parameter(uec, num_threads_rx);
1179 
1180 	/* Init ethernet Tx and Rx parameter command */
1181 	if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
1182 					 num_threads_rx)) {
1183 		printf("%s issue init enet cmd failed\n", __FUNCTION__);
1184 		return -ENOMEM;
1185 	}
1186 
1187 	return 0;
1188 }
1189 
1190 static int uec_init(struct eth_device* dev, bd_t *bd)
1191 {
1192 	uec_private_t		*uec;
1193 	int			err, i;
1194 	struct phy_info         *curphy;
1195 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
1196 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
1197 #endif
1198 
1199 	uec = (uec_private_t *)dev->priv;
1200 
1201 	if (uec->the_first_run == 0) {
1202 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
1203 	/* QE9 and QE12 need to be set for enabling QE MII managment signals */
1204 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9);
1205 	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
1206 #endif
1207 
1208 		err = init_phy(dev);
1209 		if (err) {
1210 			printf("%s: Cannot initialize PHY, aborting.\n",
1211 			       dev->name);
1212 			return err;
1213 		}
1214 
1215 		curphy = uec->mii_info->phyinfo;
1216 
1217 		if (curphy->config_aneg) {
1218 			err = curphy->config_aneg(uec->mii_info);
1219 			if (err) {
1220 				printf("%s: Can't negotiate PHY\n", dev->name);
1221 				return err;
1222 			}
1223 		}
1224 
1225 		/* Give PHYs up to 5 sec to report a link */
1226 		i = 50;
1227 		do {
1228 			err = curphy->read_status(uec->mii_info);
1229 			if (!(((i-- > 0) && !uec->mii_info->link) || err))
1230 				break;
1231 			udelay(100000);
1232 		} while (1);
1233 
1234 #if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
1235 		/* QE12 needs to be released for enabling LBCTL signal*/
1236 		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12);
1237 #endif
1238 
1239 		if (err || i <= 0)
1240 			printf("warning: %s: timeout on PHY link\n", dev->name);
1241 
1242 		adjust_link(dev);
1243 		uec->the_first_run = 1;
1244 	}
1245 
1246 	/* Set up the MAC address */
1247 	if (dev->enetaddr[0] & 0x01) {
1248 		printf("%s: MacAddress is multcast address\n",
1249 			 __FUNCTION__);
1250 		return -1;
1251 	}
1252 	uec_set_mac_address(uec, dev->enetaddr);
1253 
1254 
1255 	err = uec_open(uec, COMM_DIR_RX_AND_TX);
1256 	if (err) {
1257 		printf("%s: cannot enable UEC device\n", dev->name);
1258 		return -1;
1259 	}
1260 
1261 	phy_change(dev);
1262 
1263 	return (uec->mii_info->link ? 0 : -1);
1264 }
1265 
1266 static void uec_halt(struct eth_device* dev)
1267 {
1268 	uec_private_t	*uec = (uec_private_t *)dev->priv;
1269 	uec_stop(uec, COMM_DIR_RX_AND_TX);
1270 }
1271 
1272 static int uec_send(struct eth_device *dev, void *buf, int len)
1273 {
1274 	uec_private_t		*uec;
1275 	ucc_fast_private_t	*uccf;
1276 	volatile qe_bd_t	*bd;
1277 	u16			status;
1278 	int			i;
1279 	int			result = 0;
1280 
1281 	uec = (uec_private_t *)dev->priv;
1282 	uccf = uec->uccf;
1283 	bd = uec->txBd;
1284 
1285 	/* Find an empty TxBD */
1286 	for (i = 0; bd->status & TxBD_READY; i++) {
1287 		if (i > 0x100000) {
1288 			printf("%s: tx buffer not ready\n", dev->name);
1289 			return result;
1290 		}
1291 	}
1292 
1293 	/* Init TxBD */
1294 	BD_DATA_SET(bd, buf);
1295 	BD_LENGTH_SET(bd, len);
1296 	status = bd->status;
1297 	status &= BD_WRAP;
1298 	status |= (TxBD_READY | TxBD_LAST);
1299 	BD_STATUS_SET(bd, status);
1300 
1301 	/* Tell UCC to transmit the buffer */
1302 	ucc_fast_transmit_on_demand(uccf);
1303 
1304 	/* Wait for buffer to be transmitted */
1305 	for (i = 0; bd->status & TxBD_READY; i++) {
1306 		if (i > 0x100000) {
1307 			printf("%s: tx error\n", dev->name);
1308 			return result;
1309 		}
1310 	}
1311 
1312 	/* Ok, the buffer be transimitted */
1313 	BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
1314 	uec->txBd = bd;
1315 	result = 1;
1316 
1317 	return result;
1318 }
1319 
1320 static int uec_recv(struct eth_device* dev)
1321 {
1322 	uec_private_t		*uec = dev->priv;
1323 	volatile qe_bd_t	*bd;
1324 	u16			status;
1325 	u16			len;
1326 	u8			*data;
1327 
1328 	bd = uec->rxBd;
1329 	status = bd->status;
1330 
1331 	while (!(status & RxBD_EMPTY)) {
1332 		if (!(status & RxBD_ERROR)) {
1333 			data = BD_DATA(bd);
1334 			len = BD_LENGTH(bd);
1335 			net_process_received_packet(data, len);
1336 		} else {
1337 			printf("%s: Rx error\n", dev->name);
1338 		}
1339 		status &= BD_CLEAN;
1340 		BD_LENGTH_SET(bd, 0);
1341 		BD_STATUS_SET(bd, status | RxBD_EMPTY);
1342 		BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
1343 		status = bd->status;
1344 	}
1345 	uec->rxBd = bd;
1346 
1347 	return 1;
1348 }
1349 
1350 int uec_initialize(bd_t *bis, uec_info_t *uec_info)
1351 {
1352 	struct eth_device	*dev;
1353 	int			i;
1354 	uec_private_t		*uec;
1355 	int			err;
1356 
1357 	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
1358 	if (!dev)
1359 		return 0;
1360 	memset(dev, 0, sizeof(struct eth_device));
1361 
1362 	/* Allocate the UEC private struct */
1363 	uec = (uec_private_t *)malloc(sizeof(uec_private_t));
1364 	if (!uec) {
1365 		return -ENOMEM;
1366 	}
1367 	memset(uec, 0, sizeof(uec_private_t));
1368 
1369 	/* Adjust uec_info */
1370 #if (MAX_QE_RISC == 4)
1371 	uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS;
1372 	uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS;
1373 #endif
1374 
1375 	devlist[uec_info->uf_info.ucc_num] = dev;
1376 
1377 	uec->uec_info = uec_info;
1378 	uec->dev = dev;
1379 
1380 	sprintf(dev->name, "UEC%d", uec_info->uf_info.ucc_num);
1381 	dev->iobase = 0;
1382 	dev->priv = (void *)uec;
1383 	dev->init = uec_init;
1384 	dev->halt = uec_halt;
1385 	dev->send = uec_send;
1386 	dev->recv = uec_recv;
1387 
1388 	/* Clear the ethnet address */
1389 	for (i = 0; i < 6; i++)
1390 		dev->enetaddr[i] = 0;
1391 
1392 	eth_register(dev);
1393 
1394 	err = uec_startup(uec);
1395 	if (err) {
1396 		printf("%s: Cannot configure net device, aborting.",dev->name);
1397 		return err;
1398 	}
1399 
1400 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
1401 	int retval;
1402 	struct mii_dev *mdiodev = mdio_alloc();
1403 	if (!mdiodev)
1404 		return -ENOMEM;
1405 	strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
1406 	mdiodev->read = uec_miiphy_read;
1407 	mdiodev->write = uec_miiphy_write;
1408 
1409 	retval = mdio_register(mdiodev);
1410 	if (retval < 0)
1411 		return retval;
1412 #endif
1413 
1414 	return 1;
1415 }
1416 
1417 int uec_eth_init(bd_t *bis, uec_info_t *uecs, int num)
1418 {
1419 	int i;
1420 
1421 	for (i = 0; i < num; i++)
1422 		uec_initialize(bis, &uecs[i]);
1423 
1424 	return 0;
1425 }
1426 
1427 int uec_standard_init(bd_t *bis)
1428 {
1429 	return uec_eth_init(bis, uec_info, ARRAY_SIZE(uec_info));
1430 }
1431