1 /* 2 * Copyright (C) 2006 Freescale Semiconductor, Inc. 3 * 4 * Dave Liu <daveliu@freescale.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of 9 * the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #include "common.h" 23 #include "net.h" 24 #include "malloc.h" 25 #include "asm/errno.h" 26 #include "asm/io.h" 27 #include "asm/immap_qe.h" 28 #include "qe.h" 29 #include "uccf.h" 30 #include "uec.h" 31 #include "uec_phy.h" 32 33 #if defined(CONFIG_QE) 34 35 #ifdef CONFIG_UEC_ETH1 36 static uec_info_t eth1_uec_info = { 37 .uf_info = { 38 .ucc_num = CFG_UEC1_UCC_NUM, 39 .rx_clock = CFG_UEC1_RX_CLK, 40 .tx_clock = CFG_UEC1_TX_CLK, 41 .eth_type = CFG_UEC1_ETH_TYPE, 42 }, 43 .num_threads_tx = UEC_NUM_OF_THREADS_4, 44 .num_threads_rx = UEC_NUM_OF_THREADS_4, 45 .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, 46 .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, 47 .tx_bd_ring_len = 16, 48 .rx_bd_ring_len = 16, 49 .phy_address = CFG_UEC1_PHY_ADDR, 50 .enet_interface = CFG_UEC1_INTERFACE_MODE, 51 }; 52 #endif 53 #ifdef CONFIG_UEC_ETH2 54 static uec_info_t eth2_uec_info = { 55 .uf_info = { 56 .ucc_num = CFG_UEC2_UCC_NUM, 57 .rx_clock = CFG_UEC2_RX_CLK, 58 .tx_clock = CFG_UEC2_TX_CLK, 59 .eth_type = CFG_UEC2_ETH_TYPE, 60 }, 61 .num_threads_tx = UEC_NUM_OF_THREADS_4, 62 .num_threads_rx = UEC_NUM_OF_THREADS_4, 63 .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, 64 .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, 65 .tx_bd_ring_len = 16, 66 .rx_bd_ring_len = 16, 67 .phy_address = CFG_UEC2_PHY_ADDR, 68 .enet_interface = CFG_UEC2_INTERFACE_MODE, 69 }; 70 #endif 71 72 #ifdef CONFIG_UEC_ETH3 73 static uec_info_t eth3_uec_info = { 74 .uf_info = { 75 .ucc_num = CFG_UEC3_UCC_NUM, 76 .rx_clock = CFG_UEC3_RX_CLK, 77 .tx_clock = CFG_UEC3_TX_CLK, 78 .eth_type = CFG_UEC3_ETH_TYPE, 79 }, 80 .num_threads_tx = UEC_NUM_OF_THREADS_4, 81 .num_threads_rx = UEC_NUM_OF_THREADS_4, 82 .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, 83 .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, 84 .tx_bd_ring_len = 16, 85 .rx_bd_ring_len = 16, 86 .phy_address = CFG_UEC3_PHY_ADDR, 87 .enet_interface = CFG_UEC3_INTERFACE_MODE, 88 }; 89 #endif 90 91 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode) 92 { 93 uec_t *uec_regs; 94 u32 maccfg1; 95 96 if (!uec) { 97 printf("%s: uec not initial\n", __FUNCTION__); 98 return -EINVAL; 99 } 100 uec_regs = uec->uec_regs; 101 102 maccfg1 = in_be32(&uec_regs->maccfg1); 103 104 if (mode & COMM_DIR_TX) { 105 maccfg1 |= MACCFG1_ENABLE_TX; 106 out_be32(&uec_regs->maccfg1, maccfg1); 107 uec->mac_tx_enabled = 1; 108 } 109 110 if (mode & COMM_DIR_RX) { 111 maccfg1 |= MACCFG1_ENABLE_RX; 112 out_be32(&uec_regs->maccfg1, maccfg1); 113 uec->mac_rx_enabled = 1; 114 } 115 116 return 0; 117 } 118 119 static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode) 120 { 121 uec_t *uec_regs; 122 u32 maccfg1; 123 124 if (!uec) { 125 printf("%s: uec not initial\n", __FUNCTION__); 126 return -EINVAL; 127 } 128 uec_regs = uec->uec_regs; 129 130 maccfg1 = in_be32(&uec_regs->maccfg1); 131 132 if (mode & COMM_DIR_TX) { 133 maccfg1 &= ~MACCFG1_ENABLE_TX; 134 out_be32(&uec_regs->maccfg1, maccfg1); 135 uec->mac_tx_enabled = 0; 136 } 137 138 if (mode & COMM_DIR_RX) { 139 maccfg1 &= ~MACCFG1_ENABLE_RX; 140 out_be32(&uec_regs->maccfg1, maccfg1); 141 uec->mac_rx_enabled = 0; 142 } 143 144 return 0; 145 } 146 147 static int uec_graceful_stop_tx(uec_private_t *uec) 148 { 149 ucc_fast_t *uf_regs; 150 u32 cecr_subblock; 151 u32 ucce; 152 153 if (!uec || !uec->uccf) { 154 printf("%s: No handle passed.\n", __FUNCTION__); 155 return -EINVAL; 156 } 157 158 uf_regs = uec->uccf->uf_regs; 159 160 /* Clear the grace stop event */ 161 out_be32(&uf_regs->ucce, UCCE_GRA); 162 163 /* Issue host command */ 164 cecr_subblock = 165 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 166 qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, 167 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 168 169 /* Wait for command to complete */ 170 do { 171 ucce = in_be32(&uf_regs->ucce); 172 } while (! (ucce & UCCE_GRA)); 173 174 uec->grace_stopped_tx = 1; 175 176 return 0; 177 } 178 179 static int uec_graceful_stop_rx(uec_private_t *uec) 180 { 181 u32 cecr_subblock; 182 u8 ack; 183 184 if (!uec) { 185 printf("%s: No handle passed.\n", __FUNCTION__); 186 return -EINVAL; 187 } 188 189 if (!uec->p_rx_glbl_pram) { 190 printf("%s: No init rx global parameter\n", __FUNCTION__); 191 return -EINVAL; 192 } 193 194 /* Clear acknowledge bit */ 195 ack = uec->p_rx_glbl_pram->rxgstpack; 196 ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; 197 uec->p_rx_glbl_pram->rxgstpack = ack; 198 199 /* Keep issuing cmd and checking ack bit until it is asserted */ 200 do { 201 /* Issue host command */ 202 cecr_subblock = 203 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 204 qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, 205 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 206 ack = uec->p_rx_glbl_pram->rxgstpack; 207 } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX )); 208 209 uec->grace_stopped_rx = 1; 210 211 return 0; 212 } 213 214 static int uec_restart_tx(uec_private_t *uec) 215 { 216 u32 cecr_subblock; 217 218 if (!uec || !uec->uec_info) { 219 printf("%s: No handle passed.\n", __FUNCTION__); 220 return -EINVAL; 221 } 222 223 cecr_subblock = 224 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 225 qe_issue_cmd(QE_RESTART_TX, cecr_subblock, 226 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 227 228 uec->grace_stopped_tx = 0; 229 230 return 0; 231 } 232 233 static int uec_restart_rx(uec_private_t *uec) 234 { 235 u32 cecr_subblock; 236 237 if (!uec || !uec->uec_info) { 238 printf("%s: No handle passed.\n", __FUNCTION__); 239 return -EINVAL; 240 } 241 242 cecr_subblock = 243 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 244 qe_issue_cmd(QE_RESTART_RX, cecr_subblock, 245 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 246 247 uec->grace_stopped_rx = 0; 248 249 return 0; 250 } 251 252 static int uec_open(uec_private_t *uec, comm_dir_e mode) 253 { 254 ucc_fast_private_t *uccf; 255 256 if (!uec || !uec->uccf) { 257 printf("%s: No handle passed.\n", __FUNCTION__); 258 return -EINVAL; 259 } 260 uccf = uec->uccf; 261 262 /* check if the UCC number is in range. */ 263 if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { 264 printf("%s: ucc_num out of range.\n", __FUNCTION__); 265 return -EINVAL; 266 } 267 268 /* Enable MAC */ 269 uec_mac_enable(uec, mode); 270 271 /* Enable UCC fast */ 272 ucc_fast_enable(uccf, mode); 273 274 /* RISC microcode start */ 275 if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) { 276 uec_restart_tx(uec); 277 } 278 if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) { 279 uec_restart_rx(uec); 280 } 281 282 return 0; 283 } 284 285 static int uec_stop(uec_private_t *uec, comm_dir_e mode) 286 { 287 ucc_fast_private_t *uccf; 288 289 if (!uec || !uec->uccf) { 290 printf("%s: No handle passed.\n", __FUNCTION__); 291 return -EINVAL; 292 } 293 uccf = uec->uccf; 294 295 /* check if the UCC number is in range. */ 296 if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { 297 printf("%s: ucc_num out of range.\n", __FUNCTION__); 298 return -EINVAL; 299 } 300 /* Stop any transmissions */ 301 if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) { 302 uec_graceful_stop_tx(uec); 303 } 304 /* Stop any receptions */ 305 if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) { 306 uec_graceful_stop_rx(uec); 307 } 308 309 /* Disable the UCC fast */ 310 ucc_fast_disable(uec->uccf, mode); 311 312 /* Disable the MAC */ 313 uec_mac_disable(uec, mode); 314 315 return 0; 316 } 317 318 static int uec_set_mac_duplex(uec_private_t *uec, int duplex) 319 { 320 uec_t *uec_regs; 321 u32 maccfg2; 322 323 if (!uec) { 324 printf("%s: uec not initial\n", __FUNCTION__); 325 return -EINVAL; 326 } 327 uec_regs = uec->uec_regs; 328 329 if (duplex == DUPLEX_HALF) { 330 maccfg2 = in_be32(&uec_regs->maccfg2); 331 maccfg2 &= ~MACCFG2_FDX; 332 out_be32(&uec_regs->maccfg2, maccfg2); 333 } 334 335 if (duplex == DUPLEX_FULL) { 336 maccfg2 = in_be32(&uec_regs->maccfg2); 337 maccfg2 |= MACCFG2_FDX; 338 out_be32(&uec_regs->maccfg2, maccfg2); 339 } 340 341 return 0; 342 } 343 344 static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode) 345 { 346 enet_interface_e enet_if_mode; 347 uec_info_t *uec_info; 348 uec_t *uec_regs; 349 u32 upsmr; 350 u32 maccfg2; 351 352 if (!uec) { 353 printf("%s: uec not initial\n", __FUNCTION__); 354 return -EINVAL; 355 } 356 357 uec_info = uec->uec_info; 358 uec_regs = uec->uec_regs; 359 enet_if_mode = if_mode; 360 361 maccfg2 = in_be32(&uec_regs->maccfg2); 362 maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; 363 364 upsmr = in_be32(&uec->uccf->uf_regs->upsmr); 365 upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); 366 367 switch (enet_if_mode) { 368 case ENET_100_MII: 369 case ENET_10_MII: 370 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 371 break; 372 case ENET_1000_GMII: 373 maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; 374 break; 375 case ENET_1000_TBI: 376 maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; 377 upsmr |= UPSMR_TBIM; 378 break; 379 case ENET_1000_RTBI: 380 maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; 381 upsmr |= (UPSMR_RPM | UPSMR_TBIM); 382 break; 383 case ENET_1000_RGMII: 384 maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; 385 upsmr |= UPSMR_RPM; 386 break; 387 case ENET_100_RGMII: 388 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 389 upsmr |= UPSMR_RPM; 390 break; 391 case ENET_10_RGMII: 392 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 393 upsmr |= (UPSMR_RPM | UPSMR_R10M); 394 break; 395 case ENET_100_RMII: 396 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 397 upsmr |= UPSMR_RMM; 398 break; 399 case ENET_10_RMII: 400 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 401 upsmr |= (UPSMR_R10M | UPSMR_RMM); 402 break; 403 default: 404 return -EINVAL; 405 break; 406 } 407 out_be32(&uec_regs->maccfg2, maccfg2); 408 out_be32(&uec->uccf->uf_regs->upsmr, upsmr); 409 410 return 0; 411 } 412 413 static int init_mii_management_configuration(uec_mii_t *uec_mii_regs) 414 { 415 uint timeout = 0x1000; 416 u32 miimcfg = 0; 417 418 miimcfg = in_be32(&uec_mii_regs->miimcfg); 419 miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; 420 out_be32(&uec_mii_regs->miimcfg, miimcfg); 421 422 /* Wait until the bus is free */ 423 while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--); 424 if (timeout <= 0) { 425 printf("%s: The MII Bus is stuck!", __FUNCTION__); 426 return -ETIMEDOUT; 427 } 428 429 return 0; 430 } 431 432 static int init_phy(struct eth_device *dev) 433 { 434 uec_private_t *uec; 435 uec_mii_t *umii_regs; 436 struct uec_mii_info *mii_info; 437 struct phy_info *curphy; 438 int err; 439 440 uec = (uec_private_t *)dev->priv; 441 umii_regs = uec->uec_mii_regs; 442 443 uec->oldlink = 0; 444 uec->oldspeed = 0; 445 uec->oldduplex = -1; 446 447 mii_info = malloc(sizeof(*mii_info)); 448 if (!mii_info) { 449 printf("%s: Could not allocate mii_info", dev->name); 450 return -ENOMEM; 451 } 452 memset(mii_info, 0, sizeof(*mii_info)); 453 454 if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { 455 mii_info->speed = SPEED_1000; 456 } else { 457 mii_info->speed = SPEED_100; 458 } 459 460 mii_info->duplex = DUPLEX_FULL; 461 mii_info->pause = 0; 462 mii_info->link = 1; 463 464 mii_info->advertising = (ADVERTISED_10baseT_Half | 465 ADVERTISED_10baseT_Full | 466 ADVERTISED_100baseT_Half | 467 ADVERTISED_100baseT_Full | 468 ADVERTISED_1000baseT_Full); 469 mii_info->autoneg = 1; 470 mii_info->mii_id = uec->uec_info->phy_address; 471 mii_info->dev = dev; 472 473 mii_info->mdio_read = &uec_read_phy_reg; 474 mii_info->mdio_write = &uec_write_phy_reg; 475 476 uec->mii_info = mii_info; 477 478 if (init_mii_management_configuration(umii_regs)) { 479 printf("%s: The MII Bus is stuck!", dev->name); 480 err = -1; 481 goto bus_fail; 482 } 483 484 /* get info for this PHY */ 485 curphy = uec_get_phy_info(uec->mii_info); 486 if (!curphy) { 487 printf("%s: No PHY found", dev->name); 488 err = -1; 489 goto no_phy; 490 } 491 492 mii_info->phyinfo = curphy; 493 494 /* Run the commands which initialize the PHY */ 495 if (curphy->init) { 496 err = curphy->init(uec->mii_info); 497 if (err) 498 goto phy_init_fail; 499 } 500 501 return 0; 502 503 phy_init_fail: 504 no_phy: 505 bus_fail: 506 free(mii_info); 507 return err; 508 } 509 510 static void adjust_link(struct eth_device *dev) 511 { 512 uec_private_t *uec = (uec_private_t *)dev->priv; 513 uec_t *uec_regs; 514 struct uec_mii_info *mii_info = uec->mii_info; 515 516 extern void change_phy_interface_mode(struct eth_device *dev, 517 enet_interface_e mode); 518 uec_regs = uec->uec_regs; 519 520 if (mii_info->link) { 521 /* Now we make sure that we can be in full duplex mode. 522 * If not, we operate in half-duplex mode. */ 523 if (mii_info->duplex != uec->oldduplex) { 524 if (!(mii_info->duplex)) { 525 uec_set_mac_duplex(uec, DUPLEX_HALF); 526 printf("%s: Half Duplex\n", dev->name); 527 } else { 528 uec_set_mac_duplex(uec, DUPLEX_FULL); 529 printf("%s: Full Duplex\n", dev->name); 530 } 531 uec->oldduplex = mii_info->duplex; 532 } 533 534 if (mii_info->speed != uec->oldspeed) { 535 if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { 536 switch (mii_info->speed) { 537 case 1000: 538 break; 539 case 100: 540 printf ("switching to rgmii 100\n"); 541 /* change phy to rgmii 100 */ 542 change_phy_interface_mode(dev, 543 ENET_100_RGMII); 544 /* change the MAC interface mode */ 545 uec_set_mac_if_mode(uec,ENET_100_RGMII); 546 break; 547 case 10: 548 printf ("switching to rgmii 10\n"); 549 /* change phy to rgmii 10 */ 550 change_phy_interface_mode(dev, 551 ENET_10_RGMII); 552 /* change the MAC interface mode */ 553 uec_set_mac_if_mode(uec,ENET_10_RGMII); 554 break; 555 default: 556 printf("%s: Ack,Speed(%d)is illegal\n", 557 dev->name, mii_info->speed); 558 break; 559 } 560 } 561 562 printf("%s: Speed %dBT\n", dev->name, mii_info->speed); 563 uec->oldspeed = mii_info->speed; 564 } 565 566 if (!uec->oldlink) { 567 printf("%s: Link is up\n", dev->name); 568 uec->oldlink = 1; 569 } 570 571 } else { /* if (mii_info->link) */ 572 if (uec->oldlink) { 573 printf("%s: Link is down\n", dev->name); 574 uec->oldlink = 0; 575 uec->oldspeed = 0; 576 uec->oldduplex = -1; 577 } 578 } 579 } 580 581 static void phy_change(struct eth_device *dev) 582 { 583 uec_private_t *uec = (uec_private_t *)dev->priv; 584 uec_t *uec_regs; 585 int result = 0; 586 587 uec_regs = uec->uec_regs; 588 589 /* Delay 5s to give the PHY a chance to change the register state */ 590 udelay(5000000); 591 592 /* Update the link, speed, duplex */ 593 result = uec->mii_info->phyinfo->read_status(uec->mii_info); 594 595 /* Adjust the interface according to speed */ 596 if ((0 == result) || (uec->mii_info->link == 0)) { 597 adjust_link(dev); 598 } 599 } 600 601 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr) 602 { 603 uec_t *uec_regs; 604 u32 mac_addr1; 605 u32 mac_addr2; 606 607 if (!uec) { 608 printf("%s: uec not initial\n", __FUNCTION__); 609 return -EINVAL; 610 } 611 612 uec_regs = uec->uec_regs; 613 614 /* if a station address of 0x12345678ABCD, perform a write to 615 MACSTNADDR1 of 0xCDAB7856, 616 MACSTNADDR2 of 0x34120000 */ 617 618 mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \ 619 (mac_addr[3] << 8) | (mac_addr[2]); 620 out_be32(&uec_regs->macstnaddr1, mac_addr1); 621 622 mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000; 623 out_be32(&uec_regs->macstnaddr2, mac_addr2); 624 625 return 0; 626 } 627 628 static int uec_convert_threads_num(uec_num_of_threads_e threads_num, 629 int *threads_num_ret) 630 { 631 int num_threads_numerica; 632 633 switch (threads_num) { 634 case UEC_NUM_OF_THREADS_1: 635 num_threads_numerica = 1; 636 break; 637 case UEC_NUM_OF_THREADS_2: 638 num_threads_numerica = 2; 639 break; 640 case UEC_NUM_OF_THREADS_4: 641 num_threads_numerica = 4; 642 break; 643 case UEC_NUM_OF_THREADS_6: 644 num_threads_numerica = 6; 645 break; 646 case UEC_NUM_OF_THREADS_8: 647 num_threads_numerica = 8; 648 break; 649 default: 650 printf("%s: Bad number of threads value.", 651 __FUNCTION__); 652 return -EINVAL; 653 } 654 655 *threads_num_ret = num_threads_numerica; 656 657 return 0; 658 } 659 660 static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx) 661 { 662 uec_info_t *uec_info; 663 u32 end_bd; 664 u8 bmrx = 0; 665 int i; 666 667 uec_info = uec->uec_info; 668 669 /* Alloc global Tx parameter RAM page */ 670 uec->tx_glbl_pram_offset = qe_muram_alloc( 671 sizeof(uec_tx_global_pram_t), 672 UEC_TX_GLOBAL_PRAM_ALIGNMENT); 673 uec->p_tx_glbl_pram = (uec_tx_global_pram_t *) 674 qe_muram_addr(uec->tx_glbl_pram_offset); 675 676 /* Zero the global Tx prameter RAM */ 677 memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t)); 678 679 /* Init global Tx parameter RAM */ 680 681 /* TEMODER, RMON statistics disable, one Tx queue */ 682 out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); 683 684 /* SQPTR */ 685 uec->send_q_mem_reg_offset = qe_muram_alloc( 686 sizeof(uec_send_queue_qd_t), 687 UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); 688 uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *) 689 qe_muram_addr(uec->send_q_mem_reg_offset); 690 out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); 691 692 /* Setup the table with TxBDs ring */ 693 end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) 694 * SIZEOFBD; 695 out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, 696 (u32)(uec->p_tx_bd_ring)); 697 out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, 698 end_bd); 699 700 /* Scheduler Base Pointer, we have only one Tx queue, no need it */ 701 out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); 702 703 /* TxRMON Base Pointer, TxRMON disable, we don't need it */ 704 out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); 705 706 /* TSTATE, global snooping, big endian, the CSB bus selected */ 707 bmrx = BMR_INIT_VALUE; 708 out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); 709 710 /* IPH_Offset */ 711 for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) { 712 out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); 713 } 714 715 /* VTAG table */ 716 for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) { 717 out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); 718 } 719 720 /* TQPTR */ 721 uec->thread_dat_tx_offset = qe_muram_alloc( 722 num_threads_tx * sizeof(uec_thread_data_tx_t) + 723 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT); 724 725 uec->p_thread_data_tx = (uec_thread_data_tx_t *) 726 qe_muram_addr(uec->thread_dat_tx_offset); 727 out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); 728 } 729 730 static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx) 731 { 732 u8 bmrx = 0; 733 int i; 734 uec_82xx_address_filtering_pram_t *p_af_pram; 735 736 /* Allocate global Rx parameter RAM page */ 737 uec->rx_glbl_pram_offset = qe_muram_alloc( 738 sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT); 739 uec->p_rx_glbl_pram = (uec_rx_global_pram_t *) 740 qe_muram_addr(uec->rx_glbl_pram_offset); 741 742 /* Zero Global Rx parameter RAM */ 743 memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t)); 744 745 /* Init global Rx parameter RAM */ 746 /* REMODER, Extended feature mode disable, VLAN disable, 747 LossLess flow control disable, Receive firmware statisic disable, 748 Extended address parsing mode disable, One Rx queues, 749 Dynamic maximum/minimum frame length disable, IP checksum check 750 disable, IP address alignment disable 751 */ 752 out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); 753 754 /* RQPTR */ 755 uec->thread_dat_rx_offset = qe_muram_alloc( 756 num_threads_rx * sizeof(uec_thread_data_rx_t), 757 UEC_THREAD_DATA_ALIGNMENT); 758 uec->p_thread_data_rx = (uec_thread_data_rx_t *) 759 qe_muram_addr(uec->thread_dat_rx_offset); 760 out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); 761 762 /* Type_or_Len */ 763 out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); 764 765 /* RxRMON base pointer, we don't need it */ 766 out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); 767 768 /* IntCoalescingPTR, we don't need it, no interrupt */ 769 out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); 770 771 /* RSTATE, global snooping, big endian, the CSB bus selected */ 772 bmrx = BMR_INIT_VALUE; 773 out_8(&uec->p_rx_glbl_pram->rstate, bmrx); 774 775 /* MRBLR */ 776 out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); 777 778 /* RBDQPTR */ 779 uec->rx_bd_qs_tbl_offset = qe_muram_alloc( 780 sizeof(uec_rx_bd_queues_entry_t) + \ 781 sizeof(uec_rx_prefetched_bds_t), 782 UEC_RX_BD_QUEUES_ALIGNMENT); 783 uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *) 784 qe_muram_addr(uec->rx_bd_qs_tbl_offset); 785 786 /* Zero it */ 787 memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \ 788 sizeof(uec_rx_prefetched_bds_t)); 789 out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); 790 out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, 791 (u32)uec->p_rx_bd_ring); 792 793 /* MFLR */ 794 out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); 795 /* MINFLR */ 796 out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); 797 /* MAXD1 */ 798 out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); 799 /* MAXD2 */ 800 out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); 801 /* ECAM_PTR */ 802 out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); 803 /* L2QT */ 804 out_be32(&uec->p_rx_glbl_pram->l2qt, 0); 805 /* L3QT */ 806 for (i = 0; i < 8; i++) { 807 out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); 808 } 809 810 /* VLAN_TYPE */ 811 out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); 812 /* TCI */ 813 out_be16(&uec->p_rx_glbl_pram->vlantci, 0); 814 815 /* Clear PQ2 style address filtering hash table */ 816 p_af_pram = (uec_82xx_address_filtering_pram_t *) \ 817 uec->p_rx_glbl_pram->addressfiltering; 818 819 p_af_pram->iaddr_h = 0; 820 p_af_pram->iaddr_l = 0; 821 p_af_pram->gaddr_h = 0; 822 p_af_pram->gaddr_l = 0; 823 } 824 825 static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec, 826 int thread_tx, int thread_rx) 827 { 828 uec_init_cmd_pram_t *p_init_enet_param; 829 u32 init_enet_param_offset; 830 uec_info_t *uec_info; 831 int i; 832 int snum; 833 u32 init_enet_offset; 834 u32 entry_val; 835 u32 command; 836 u32 cecr_subblock; 837 838 uec_info = uec->uec_info; 839 840 /* Allocate init enet command parameter */ 841 uec->init_enet_param_offset = qe_muram_alloc( 842 sizeof(uec_init_cmd_pram_t), 4); 843 init_enet_param_offset = uec->init_enet_param_offset; 844 uec->p_init_enet_param = (uec_init_cmd_pram_t *) 845 qe_muram_addr(uec->init_enet_param_offset); 846 847 /* Zero init enet command struct */ 848 memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t)); 849 850 /* Init the command struct */ 851 p_init_enet_param = uec->p_init_enet_param; 852 p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; 853 p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; 854 p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; 855 p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; 856 p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; 857 p_init_enet_param->largestexternallookupkeysize = 0; 858 859 p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) 860 << ENET_INIT_PARAM_RGF_SHIFT; 861 p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) 862 << ENET_INIT_PARAM_TGF_SHIFT; 863 864 /* Init Rx global parameter pointer */ 865 p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | 866 (u32)uec_info->riscRx; 867 868 /* Init Rx threads */ 869 for (i = 0; i < (thread_rx + 1); i++) { 870 if ((snum = qe_get_snum()) < 0) { 871 printf("%s can not get snum\n", __FUNCTION__); 872 return -ENOMEM; 873 } 874 875 if (i==0) { 876 init_enet_offset = 0; 877 } else { 878 init_enet_offset = qe_muram_alloc( 879 sizeof(uec_thread_rx_pram_t), 880 UEC_THREAD_RX_PRAM_ALIGNMENT); 881 } 882 883 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | 884 init_enet_offset | (u32)uec_info->riscRx; 885 p_init_enet_param->rxthread[i] = entry_val; 886 } 887 888 /* Init Tx global parameter pointer */ 889 p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | 890 (u32)uec_info->riscTx; 891 892 /* Init Tx threads */ 893 for (i = 0; i < thread_tx; i++) { 894 if ((snum = qe_get_snum()) < 0) { 895 printf("%s can not get snum\n", __FUNCTION__); 896 return -ENOMEM; 897 } 898 899 init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t), 900 UEC_THREAD_TX_PRAM_ALIGNMENT); 901 902 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | 903 init_enet_offset | (u32)uec_info->riscTx; 904 p_init_enet_param->txthread[i] = entry_val; 905 } 906 907 __asm__ __volatile__("sync"); 908 909 /* Issue QE command */ 910 command = QE_INIT_TX_RX; 911 cecr_subblock = ucc_fast_get_qe_cr_subblock( 912 uec->uec_info->uf_info.ucc_num); 913 qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, 914 init_enet_param_offset); 915 916 return 0; 917 } 918 919 static int uec_startup(uec_private_t *uec) 920 { 921 uec_info_t *uec_info; 922 ucc_fast_info_t *uf_info; 923 ucc_fast_private_t *uccf; 924 ucc_fast_t *uf_regs; 925 uec_t *uec_regs; 926 int num_threads_tx; 927 int num_threads_rx; 928 u32 utbipar; 929 enet_interface_e enet_interface; 930 u32 length; 931 u32 align; 932 qe_bd_t *bd; 933 u8 *buf; 934 int i; 935 936 if (!uec || !uec->uec_info) { 937 printf("%s: uec or uec_info not initial\n", __FUNCTION__); 938 return -EINVAL; 939 } 940 941 uec_info = uec->uec_info; 942 uf_info = &(uec_info->uf_info); 943 944 /* Check if Rx BD ring len is illegal */ 945 if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \ 946 (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) { 947 printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", 948 __FUNCTION__); 949 return -EINVAL; 950 } 951 952 /* Check if Tx BD ring len is illegal */ 953 if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { 954 printf("%s: Tx BD ring length must not be smaller than 2.\n", 955 __FUNCTION__); 956 return -EINVAL; 957 } 958 959 /* Check if MRBLR is illegal */ 960 if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { 961 printf("%s: max rx buffer length must be mutliple of 128.\n", 962 __FUNCTION__); 963 return -EINVAL; 964 } 965 966 /* Both Rx and Tx are stopped */ 967 uec->grace_stopped_rx = 1; 968 uec->grace_stopped_tx = 1; 969 970 /* Init UCC fast */ 971 if (ucc_fast_init(uf_info, &uccf)) { 972 printf("%s: failed to init ucc fast\n", __FUNCTION__); 973 return -ENOMEM; 974 } 975 976 /* Save uccf */ 977 uec->uccf = uccf; 978 979 /* Convert the Tx threads number */ 980 if (uec_convert_threads_num(uec_info->num_threads_tx, 981 &num_threads_tx)) { 982 return -EINVAL; 983 } 984 985 /* Convert the Rx threads number */ 986 if (uec_convert_threads_num(uec_info->num_threads_rx, 987 &num_threads_rx)) { 988 return -EINVAL; 989 } 990 991 uf_regs = uccf->uf_regs; 992 993 /* UEC register is following UCC fast registers */ 994 uec_regs = (uec_t *)(&uf_regs->ucc_eth); 995 996 /* Save the UEC register pointer to UEC private struct */ 997 uec->uec_regs = uec_regs; 998 999 /* Init UPSMR, enable hardware statistics (UCC) */ 1000 out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); 1001 1002 /* Init MACCFG1, flow control disable, disable Tx and Rx */ 1003 out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); 1004 1005 /* Init MACCFG2, length check, MAC PAD and CRC enable */ 1006 out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); 1007 1008 /* Setup MAC interface mode */ 1009 uec_set_mac_if_mode(uec, uec_info->enet_interface); 1010 1011 /* Setup MII management base */ 1012 #ifndef CONFIG_eTSEC_MDIO_BUS 1013 uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg); 1014 #else 1015 uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS; 1016 #endif 1017 1018 /* Setup MII master clock source */ 1019 qe_set_mii_clk_src(uec_info->uf_info.ucc_num); 1020 1021 /* Setup UTBIPAR */ 1022 utbipar = in_be32(&uec_regs->utbipar); 1023 utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; 1024 enet_interface = uec->uec_info->enet_interface; 1025 if (enet_interface == ENET_1000_TBI || 1026 enet_interface == ENET_1000_RTBI) { 1027 utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num) 1028 << UTBIPAR_PHY_ADDRESS_SHIFT; 1029 } else { 1030 utbipar |= (0x10 + uec_info->uf_info.ucc_num) 1031 << UTBIPAR_PHY_ADDRESS_SHIFT; 1032 } 1033 1034 out_be32(&uec_regs->utbipar, utbipar); 1035 1036 /* Allocate Tx BDs */ 1037 length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / 1038 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * 1039 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; 1040 if ((uec_info->tx_bd_ring_len * SIZEOFBD) % 1041 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) { 1042 length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; 1043 } 1044 1045 align = UEC_TX_BD_RING_ALIGNMENT; 1046 uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); 1047 if (uec->tx_bd_ring_offset != 0) { 1048 uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) 1049 & ~(align - 1)); 1050 } 1051 1052 /* Zero all of Tx BDs */ 1053 memset((void *)(uec->tx_bd_ring_offset), 0, length + align); 1054 1055 /* Allocate Rx BDs */ 1056 length = uec_info->rx_bd_ring_len * SIZEOFBD; 1057 align = UEC_RX_BD_RING_ALIGNMENT; 1058 uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); 1059 if (uec->rx_bd_ring_offset != 0) { 1060 uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) 1061 & ~(align - 1)); 1062 } 1063 1064 /* Zero all of Rx BDs */ 1065 memset((void *)(uec->rx_bd_ring_offset), 0, length + align); 1066 1067 /* Allocate Rx buffer */ 1068 length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; 1069 align = UEC_RX_DATA_BUF_ALIGNMENT; 1070 uec->rx_buf_offset = (u32)malloc(length + align); 1071 if (uec->rx_buf_offset != 0) { 1072 uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) 1073 & ~(align - 1)); 1074 } 1075 1076 /* Zero all of the Rx buffer */ 1077 memset((void *)(uec->rx_buf_offset), 0, length + align); 1078 1079 /* Init TxBD ring */ 1080 bd = (qe_bd_t *)uec->p_tx_bd_ring; 1081 uec->txBd = bd; 1082 1083 for (i = 0; i < uec_info->tx_bd_ring_len; i++) { 1084 BD_DATA_CLEAR(bd); 1085 BD_STATUS_SET(bd, 0); 1086 BD_LENGTH_SET(bd, 0); 1087 bd ++; 1088 } 1089 BD_STATUS_SET((--bd), TxBD_WRAP); 1090 1091 /* Init RxBD ring */ 1092 bd = (qe_bd_t *)uec->p_rx_bd_ring; 1093 uec->rxBd = bd; 1094 buf = uec->p_rx_buf; 1095 for (i = 0; i < uec_info->rx_bd_ring_len; i++) { 1096 BD_DATA_SET(bd, buf); 1097 BD_LENGTH_SET(bd, 0); 1098 BD_STATUS_SET(bd, RxBD_EMPTY); 1099 buf += MAX_RXBUF_LEN; 1100 bd ++; 1101 } 1102 BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY); 1103 1104 /* Init global Tx parameter RAM */ 1105 uec_init_tx_parameter(uec, num_threads_tx); 1106 1107 /* Init global Rx parameter RAM */ 1108 uec_init_rx_parameter(uec, num_threads_rx); 1109 1110 /* Init ethernet Tx and Rx parameter command */ 1111 if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, 1112 num_threads_rx)) { 1113 printf("%s issue init enet cmd failed\n", __FUNCTION__); 1114 return -ENOMEM; 1115 } 1116 1117 return 0; 1118 } 1119 1120 static int uec_init(struct eth_device* dev, bd_t *bd) 1121 { 1122 uec_private_t *uec; 1123 int err; 1124 1125 uec = (uec_private_t *)dev->priv; 1126 1127 if (uec->the_first_run == 0) { 1128 /* Set up the MAC address */ 1129 if (dev->enetaddr[0] & 0x01) { 1130 printf("%s: MacAddress is multcast address\n", 1131 __FUNCTION__); 1132 return 0; 1133 } 1134 uec_set_mac_address(uec, dev->enetaddr); 1135 uec->the_first_run = 1; 1136 } 1137 1138 err = uec_open(uec, COMM_DIR_RX_AND_TX); 1139 if (err) { 1140 printf("%s: cannot enable UEC device\n", dev->name); 1141 return 0; 1142 } 1143 1144 return uec->mii_info->link; 1145 } 1146 1147 static void uec_halt(struct eth_device* dev) 1148 { 1149 uec_private_t *uec = (uec_private_t *)dev->priv; 1150 uec_stop(uec, COMM_DIR_RX_AND_TX); 1151 } 1152 1153 static int uec_send(struct eth_device* dev, volatile void *buf, int len) 1154 { 1155 uec_private_t *uec; 1156 ucc_fast_private_t *uccf; 1157 volatile qe_bd_t *bd; 1158 u16 status; 1159 int i; 1160 int result = 0; 1161 1162 uec = (uec_private_t *)dev->priv; 1163 uccf = uec->uccf; 1164 bd = uec->txBd; 1165 1166 /* Find an empty TxBD */ 1167 for (i = 0; bd->status & TxBD_READY; i++) { 1168 if (i > 0x100000) { 1169 printf("%s: tx buffer not ready\n", dev->name); 1170 return result; 1171 } 1172 } 1173 1174 /* Init TxBD */ 1175 BD_DATA_SET(bd, buf); 1176 BD_LENGTH_SET(bd, len); 1177 status = bd->status; 1178 status &= BD_WRAP; 1179 status |= (TxBD_READY | TxBD_LAST); 1180 BD_STATUS_SET(bd, status); 1181 1182 /* Tell UCC to transmit the buffer */ 1183 ucc_fast_transmit_on_demand(uccf); 1184 1185 /* Wait for buffer to be transmitted */ 1186 for (i = 0; bd->status & TxBD_READY; i++) { 1187 if (i > 0x100000) { 1188 printf("%s: tx error\n", dev->name); 1189 return result; 1190 } 1191 } 1192 1193 /* Ok, the buffer be transimitted */ 1194 BD_ADVANCE(bd, status, uec->p_tx_bd_ring); 1195 uec->txBd = bd; 1196 result = 1; 1197 1198 return result; 1199 } 1200 1201 static int uec_recv(struct eth_device* dev) 1202 { 1203 uec_private_t *uec = dev->priv; 1204 volatile qe_bd_t *bd; 1205 u16 status; 1206 u16 len; 1207 u8 *data; 1208 1209 bd = uec->rxBd; 1210 status = bd->status; 1211 1212 while (!(status & RxBD_EMPTY)) { 1213 if (!(status & RxBD_ERROR)) { 1214 data = BD_DATA(bd); 1215 len = BD_LENGTH(bd); 1216 NetReceive(data, len); 1217 } else { 1218 printf("%s: Rx error\n", dev->name); 1219 } 1220 status &= BD_CLEAN; 1221 BD_LENGTH_SET(bd, 0); 1222 BD_STATUS_SET(bd, status | RxBD_EMPTY); 1223 BD_ADVANCE(bd, status, uec->p_rx_bd_ring); 1224 status = bd->status; 1225 } 1226 uec->rxBd = bd; 1227 1228 return 1; 1229 } 1230 1231 int uec_initialize(int index) 1232 { 1233 struct eth_device *dev; 1234 int i; 1235 uec_private_t *uec; 1236 uec_info_t *uec_info; 1237 int err; 1238 1239 dev = (struct eth_device *)malloc(sizeof(struct eth_device)); 1240 if (!dev) 1241 return 0; 1242 memset(dev, 0, sizeof(struct eth_device)); 1243 1244 /* Allocate the UEC private struct */ 1245 uec = (uec_private_t *)malloc(sizeof(uec_private_t)); 1246 if (!uec) { 1247 return -ENOMEM; 1248 } 1249 memset(uec, 0, sizeof(uec_private_t)); 1250 1251 /* Init UEC private struct, they come from board.h */ 1252 if (index == 0) { 1253 #ifdef CONFIG_UEC_ETH1 1254 uec_info = ð1_uec_info; 1255 #endif 1256 } else if (index == 1) { 1257 #ifdef CONFIG_UEC_ETH2 1258 uec_info = ð2_uec_info; 1259 #endif 1260 } else if (index == 2) { 1261 #ifdef CONFIG_UEC_ETH3 1262 uec_info = ð3_uec_info; 1263 #endif 1264 } else { 1265 printf("%s: index is illegal.\n", __FUNCTION__); 1266 return -EINVAL; 1267 } 1268 1269 uec->uec_info = uec_info; 1270 1271 sprintf(dev->name, "FSL UEC%d", index); 1272 dev->iobase = 0; 1273 dev->priv = (void *)uec; 1274 dev->init = uec_init; 1275 dev->halt = uec_halt; 1276 dev->send = uec_send; 1277 dev->recv = uec_recv; 1278 1279 /* Clear the ethnet address */ 1280 for (i = 0; i < 6; i++) 1281 dev->enetaddr[i] = 0; 1282 1283 eth_register(dev); 1284 1285 err = uec_startup(uec); 1286 if (err) { 1287 printf("%s: Cannot configure net device, aborting.",dev->name); 1288 return err; 1289 } 1290 1291 err = init_phy(dev); 1292 if (err) { 1293 printf("%s: Cannot initialize PHY, aborting.\n", dev->name); 1294 return err; 1295 } 1296 1297 phy_change(dev); 1298 1299 return 1; 1300 } 1301 #endif /* CONFIG_QE */ 1302