1 /* 2 * Copyright (C) 2006-2011 Freescale Semiconductor, Inc. 3 * 4 * Dave Liu <daveliu@freescale.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #include <common.h> 10 #include <net.h> 11 #include <malloc.h> 12 #include <linux/errno.h> 13 #include <asm/io.h> 14 #include <linux/immap_qe.h> 15 #include "uccf.h" 16 #include "uec.h" 17 #include "uec_phy.h" 18 #include "miiphy.h" 19 #include <fsl_qe.h> 20 #include <phy.h> 21 22 /* Default UTBIPAR SMI address */ 23 #ifndef CONFIG_UTBIPAR_INIT_TBIPA 24 #define CONFIG_UTBIPAR_INIT_TBIPA 0x1F 25 #endif 26 27 static uec_info_t uec_info[] = { 28 #ifdef CONFIG_UEC_ETH1 29 STD_UEC_INFO(1), /* UEC1 */ 30 #endif 31 #ifdef CONFIG_UEC_ETH2 32 STD_UEC_INFO(2), /* UEC2 */ 33 #endif 34 #ifdef CONFIG_UEC_ETH3 35 STD_UEC_INFO(3), /* UEC3 */ 36 #endif 37 #ifdef CONFIG_UEC_ETH4 38 STD_UEC_INFO(4), /* UEC4 */ 39 #endif 40 #ifdef CONFIG_UEC_ETH5 41 STD_UEC_INFO(5), /* UEC5 */ 42 #endif 43 #ifdef CONFIG_UEC_ETH6 44 STD_UEC_INFO(6), /* UEC6 */ 45 #endif 46 #ifdef CONFIG_UEC_ETH7 47 STD_UEC_INFO(7), /* UEC7 */ 48 #endif 49 #ifdef CONFIG_UEC_ETH8 50 STD_UEC_INFO(8), /* UEC8 */ 51 #endif 52 }; 53 54 #define MAXCONTROLLERS (8) 55 56 static struct eth_device *devlist[MAXCONTROLLERS]; 57 58 static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode) 59 { 60 uec_t *uec_regs; 61 u32 maccfg1; 62 63 if (!uec) { 64 printf("%s: uec not initial\n", __FUNCTION__); 65 return -EINVAL; 66 } 67 uec_regs = uec->uec_regs; 68 69 maccfg1 = in_be32(&uec_regs->maccfg1); 70 71 if (mode & COMM_DIR_TX) { 72 maccfg1 |= MACCFG1_ENABLE_TX; 73 out_be32(&uec_regs->maccfg1, maccfg1); 74 uec->mac_tx_enabled = 1; 75 } 76 77 if (mode & COMM_DIR_RX) { 78 maccfg1 |= MACCFG1_ENABLE_RX; 79 out_be32(&uec_regs->maccfg1, maccfg1); 80 uec->mac_rx_enabled = 1; 81 } 82 83 return 0; 84 } 85 86 static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode) 87 { 88 uec_t *uec_regs; 89 u32 maccfg1; 90 91 if (!uec) { 92 printf("%s: uec not initial\n", __FUNCTION__); 93 return -EINVAL; 94 } 95 uec_regs = uec->uec_regs; 96 97 maccfg1 = in_be32(&uec_regs->maccfg1); 98 99 if (mode & COMM_DIR_TX) { 100 maccfg1 &= ~MACCFG1_ENABLE_TX; 101 out_be32(&uec_regs->maccfg1, maccfg1); 102 uec->mac_tx_enabled = 0; 103 } 104 105 if (mode & COMM_DIR_RX) { 106 maccfg1 &= ~MACCFG1_ENABLE_RX; 107 out_be32(&uec_regs->maccfg1, maccfg1); 108 uec->mac_rx_enabled = 0; 109 } 110 111 return 0; 112 } 113 114 static int uec_graceful_stop_tx(uec_private_t *uec) 115 { 116 ucc_fast_t *uf_regs; 117 u32 cecr_subblock; 118 u32 ucce; 119 120 if (!uec || !uec->uccf) { 121 printf("%s: No handle passed.\n", __FUNCTION__); 122 return -EINVAL; 123 } 124 125 uf_regs = uec->uccf->uf_regs; 126 127 /* Clear the grace stop event */ 128 out_be32(&uf_regs->ucce, UCCE_GRA); 129 130 /* Issue host command */ 131 cecr_subblock = 132 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 133 qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock, 134 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 135 136 /* Wait for command to complete */ 137 do { 138 ucce = in_be32(&uf_regs->ucce); 139 } while (! (ucce & UCCE_GRA)); 140 141 uec->grace_stopped_tx = 1; 142 143 return 0; 144 } 145 146 static int uec_graceful_stop_rx(uec_private_t *uec) 147 { 148 u32 cecr_subblock; 149 u8 ack; 150 151 if (!uec) { 152 printf("%s: No handle passed.\n", __FUNCTION__); 153 return -EINVAL; 154 } 155 156 if (!uec->p_rx_glbl_pram) { 157 printf("%s: No init rx global parameter\n", __FUNCTION__); 158 return -EINVAL; 159 } 160 161 /* Clear acknowledge bit */ 162 ack = uec->p_rx_glbl_pram->rxgstpack; 163 ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX; 164 uec->p_rx_glbl_pram->rxgstpack = ack; 165 166 /* Keep issuing cmd and checking ack bit until it is asserted */ 167 do { 168 /* Issue host command */ 169 cecr_subblock = 170 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 171 qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock, 172 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 173 ack = uec->p_rx_glbl_pram->rxgstpack; 174 } while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX )); 175 176 uec->grace_stopped_rx = 1; 177 178 return 0; 179 } 180 181 static int uec_restart_tx(uec_private_t *uec) 182 { 183 u32 cecr_subblock; 184 185 if (!uec || !uec->uec_info) { 186 printf("%s: No handle passed.\n", __FUNCTION__); 187 return -EINVAL; 188 } 189 190 cecr_subblock = 191 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 192 qe_issue_cmd(QE_RESTART_TX, cecr_subblock, 193 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 194 195 uec->grace_stopped_tx = 0; 196 197 return 0; 198 } 199 200 static int uec_restart_rx(uec_private_t *uec) 201 { 202 u32 cecr_subblock; 203 204 if (!uec || !uec->uec_info) { 205 printf("%s: No handle passed.\n", __FUNCTION__); 206 return -EINVAL; 207 } 208 209 cecr_subblock = 210 ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num); 211 qe_issue_cmd(QE_RESTART_RX, cecr_subblock, 212 (u8)QE_CR_PROTOCOL_ETHERNET, 0); 213 214 uec->grace_stopped_rx = 0; 215 216 return 0; 217 } 218 219 static int uec_open(uec_private_t *uec, comm_dir_e mode) 220 { 221 ucc_fast_private_t *uccf; 222 223 if (!uec || !uec->uccf) { 224 printf("%s: No handle passed.\n", __FUNCTION__); 225 return -EINVAL; 226 } 227 uccf = uec->uccf; 228 229 /* check if the UCC number is in range. */ 230 if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { 231 printf("%s: ucc_num out of range.\n", __FUNCTION__); 232 return -EINVAL; 233 } 234 235 /* Enable MAC */ 236 uec_mac_enable(uec, mode); 237 238 /* Enable UCC fast */ 239 ucc_fast_enable(uccf, mode); 240 241 /* RISC microcode start */ 242 if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) { 243 uec_restart_tx(uec); 244 } 245 if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) { 246 uec_restart_rx(uec); 247 } 248 249 return 0; 250 } 251 252 static int uec_stop(uec_private_t *uec, comm_dir_e mode) 253 { 254 if (!uec || !uec->uccf) { 255 printf("%s: No handle passed.\n", __FUNCTION__); 256 return -EINVAL; 257 } 258 259 /* check if the UCC number is in range. */ 260 if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) { 261 printf("%s: ucc_num out of range.\n", __FUNCTION__); 262 return -EINVAL; 263 } 264 /* Stop any transmissions */ 265 if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) { 266 uec_graceful_stop_tx(uec); 267 } 268 /* Stop any receptions */ 269 if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) { 270 uec_graceful_stop_rx(uec); 271 } 272 273 /* Disable the UCC fast */ 274 ucc_fast_disable(uec->uccf, mode); 275 276 /* Disable the MAC */ 277 uec_mac_disable(uec, mode); 278 279 return 0; 280 } 281 282 static int uec_set_mac_duplex(uec_private_t *uec, int duplex) 283 { 284 uec_t *uec_regs; 285 u32 maccfg2; 286 287 if (!uec) { 288 printf("%s: uec not initial\n", __FUNCTION__); 289 return -EINVAL; 290 } 291 uec_regs = uec->uec_regs; 292 293 if (duplex == DUPLEX_HALF) { 294 maccfg2 = in_be32(&uec_regs->maccfg2); 295 maccfg2 &= ~MACCFG2_FDX; 296 out_be32(&uec_regs->maccfg2, maccfg2); 297 } 298 299 if (duplex == DUPLEX_FULL) { 300 maccfg2 = in_be32(&uec_regs->maccfg2); 301 maccfg2 |= MACCFG2_FDX; 302 out_be32(&uec_regs->maccfg2, maccfg2); 303 } 304 305 return 0; 306 } 307 308 static int uec_set_mac_if_mode(uec_private_t *uec, 309 phy_interface_t if_mode, int speed) 310 { 311 phy_interface_t enet_if_mode; 312 uec_t *uec_regs; 313 u32 upsmr; 314 u32 maccfg2; 315 316 if (!uec) { 317 printf("%s: uec not initial\n", __FUNCTION__); 318 return -EINVAL; 319 } 320 321 uec_regs = uec->uec_regs; 322 enet_if_mode = if_mode; 323 324 maccfg2 = in_be32(&uec_regs->maccfg2); 325 maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK; 326 327 upsmr = in_be32(&uec->uccf->uf_regs->upsmr); 328 upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM); 329 330 switch (speed) { 331 case SPEED_10: 332 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 333 switch (enet_if_mode) { 334 case PHY_INTERFACE_MODE_MII: 335 break; 336 case PHY_INTERFACE_MODE_RGMII: 337 upsmr |= (UPSMR_RPM | UPSMR_R10M); 338 break; 339 case PHY_INTERFACE_MODE_RMII: 340 upsmr |= (UPSMR_R10M | UPSMR_RMM); 341 break; 342 default: 343 return -EINVAL; 344 break; 345 } 346 break; 347 case SPEED_100: 348 maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE; 349 switch (enet_if_mode) { 350 case PHY_INTERFACE_MODE_MII: 351 break; 352 case PHY_INTERFACE_MODE_RGMII: 353 upsmr |= UPSMR_RPM; 354 break; 355 case PHY_INTERFACE_MODE_RMII: 356 upsmr |= UPSMR_RMM; 357 break; 358 default: 359 return -EINVAL; 360 break; 361 } 362 break; 363 case SPEED_1000: 364 maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE; 365 switch (enet_if_mode) { 366 case PHY_INTERFACE_MODE_GMII: 367 break; 368 case PHY_INTERFACE_MODE_TBI: 369 upsmr |= UPSMR_TBIM; 370 break; 371 case PHY_INTERFACE_MODE_RTBI: 372 upsmr |= (UPSMR_RPM | UPSMR_TBIM); 373 break; 374 case PHY_INTERFACE_MODE_RGMII_RXID: 375 case PHY_INTERFACE_MODE_RGMII_TXID: 376 case PHY_INTERFACE_MODE_RGMII_ID: 377 case PHY_INTERFACE_MODE_RGMII: 378 upsmr |= UPSMR_RPM; 379 break; 380 case PHY_INTERFACE_MODE_SGMII: 381 upsmr |= UPSMR_SGMM; 382 break; 383 default: 384 return -EINVAL; 385 break; 386 } 387 break; 388 default: 389 return -EINVAL; 390 break; 391 } 392 393 out_be32(&uec_regs->maccfg2, maccfg2); 394 out_be32(&uec->uccf->uf_regs->upsmr, upsmr); 395 396 return 0; 397 } 398 399 static int init_mii_management_configuration(uec_mii_t *uec_mii_regs) 400 { 401 uint timeout = 0x1000; 402 u32 miimcfg = 0; 403 404 miimcfg = in_be32(&uec_mii_regs->miimcfg); 405 miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE; 406 out_be32(&uec_mii_regs->miimcfg, miimcfg); 407 408 /* Wait until the bus is free */ 409 while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--); 410 if (timeout <= 0) { 411 printf("%s: The MII Bus is stuck!", __FUNCTION__); 412 return -ETIMEDOUT; 413 } 414 415 return 0; 416 } 417 418 static int init_phy(struct eth_device *dev) 419 { 420 uec_private_t *uec; 421 uec_mii_t *umii_regs; 422 struct uec_mii_info *mii_info; 423 struct phy_info *curphy; 424 int err; 425 426 uec = (uec_private_t *)dev->priv; 427 umii_regs = uec->uec_mii_regs; 428 429 uec->oldlink = 0; 430 uec->oldspeed = 0; 431 uec->oldduplex = -1; 432 433 mii_info = malloc(sizeof(*mii_info)); 434 if (!mii_info) { 435 printf("%s: Could not allocate mii_info", dev->name); 436 return -ENOMEM; 437 } 438 memset(mii_info, 0, sizeof(*mii_info)); 439 440 if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { 441 mii_info->speed = SPEED_1000; 442 } else { 443 mii_info->speed = SPEED_100; 444 } 445 446 mii_info->duplex = DUPLEX_FULL; 447 mii_info->pause = 0; 448 mii_info->link = 1; 449 450 mii_info->advertising = (ADVERTISED_10baseT_Half | 451 ADVERTISED_10baseT_Full | 452 ADVERTISED_100baseT_Half | 453 ADVERTISED_100baseT_Full | 454 ADVERTISED_1000baseT_Full); 455 mii_info->autoneg = 1; 456 mii_info->mii_id = uec->uec_info->phy_address; 457 mii_info->dev = dev; 458 459 mii_info->mdio_read = &uec_read_phy_reg; 460 mii_info->mdio_write = &uec_write_phy_reg; 461 462 uec->mii_info = mii_info; 463 464 qe_set_mii_clk_src(uec->uec_info->uf_info.ucc_num); 465 466 if (init_mii_management_configuration(umii_regs)) { 467 printf("%s: The MII Bus is stuck!", dev->name); 468 err = -1; 469 goto bus_fail; 470 } 471 472 /* get info for this PHY */ 473 curphy = uec_get_phy_info(uec->mii_info); 474 if (!curphy) { 475 printf("%s: No PHY found", dev->name); 476 err = -1; 477 goto no_phy; 478 } 479 480 mii_info->phyinfo = curphy; 481 482 /* Run the commands which initialize the PHY */ 483 if (curphy->init) { 484 err = curphy->init(uec->mii_info); 485 if (err) 486 goto phy_init_fail; 487 } 488 489 return 0; 490 491 phy_init_fail: 492 no_phy: 493 bus_fail: 494 free(mii_info); 495 return err; 496 } 497 498 static void adjust_link(struct eth_device *dev) 499 { 500 uec_private_t *uec = (uec_private_t *)dev->priv; 501 struct uec_mii_info *mii_info = uec->mii_info; 502 503 extern void change_phy_interface_mode(struct eth_device *dev, 504 phy_interface_t mode, int speed); 505 506 if (mii_info->link) { 507 /* Now we make sure that we can be in full duplex mode. 508 * If not, we operate in half-duplex mode. */ 509 if (mii_info->duplex != uec->oldduplex) { 510 if (!(mii_info->duplex)) { 511 uec_set_mac_duplex(uec, DUPLEX_HALF); 512 printf("%s: Half Duplex\n", dev->name); 513 } else { 514 uec_set_mac_duplex(uec, DUPLEX_FULL); 515 printf("%s: Full Duplex\n", dev->name); 516 } 517 uec->oldduplex = mii_info->duplex; 518 } 519 520 if (mii_info->speed != uec->oldspeed) { 521 phy_interface_t mode = 522 uec->uec_info->enet_interface_type; 523 if (uec->uec_info->uf_info.eth_type == GIGA_ETH) { 524 switch (mii_info->speed) { 525 case SPEED_1000: 526 break; 527 case SPEED_100: 528 printf ("switching to rgmii 100\n"); 529 mode = PHY_INTERFACE_MODE_RGMII; 530 break; 531 case SPEED_10: 532 printf ("switching to rgmii 10\n"); 533 mode = PHY_INTERFACE_MODE_RGMII; 534 break; 535 default: 536 printf("%s: Ack,Speed(%d)is illegal\n", 537 dev->name, mii_info->speed); 538 break; 539 } 540 } 541 542 /* change phy */ 543 change_phy_interface_mode(dev, mode, mii_info->speed); 544 /* change the MAC interface mode */ 545 uec_set_mac_if_mode(uec, mode, mii_info->speed); 546 547 printf("%s: Speed %dBT\n", dev->name, mii_info->speed); 548 uec->oldspeed = mii_info->speed; 549 } 550 551 if (!uec->oldlink) { 552 printf("%s: Link is up\n", dev->name); 553 uec->oldlink = 1; 554 } 555 556 } else { /* if (mii_info->link) */ 557 if (uec->oldlink) { 558 printf("%s: Link is down\n", dev->name); 559 uec->oldlink = 0; 560 uec->oldspeed = 0; 561 uec->oldduplex = -1; 562 } 563 } 564 } 565 566 static void phy_change(struct eth_device *dev) 567 { 568 uec_private_t *uec = (uec_private_t *)dev->priv; 569 570 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) 571 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 572 573 /* QE9 and QE12 need to be set for enabling QE MII managment signals */ 574 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); 575 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); 576 #endif 577 578 /* Update the link, speed, duplex */ 579 uec->mii_info->phyinfo->read_status(uec->mii_info); 580 581 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) 582 /* 583 * QE12 is muxed with LBCTL, it needs to be released for enabling 584 * LBCTL signal for LBC usage. 585 */ 586 clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); 587 #endif 588 589 /* Adjust the interface according to speed */ 590 adjust_link(dev); 591 } 592 593 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) 594 595 /* 596 * Find a device index from the devlist by name 597 * 598 * Returns: 599 * The index where the device is located, -1 on error 600 */ 601 static int uec_miiphy_find_dev_by_name(const char *devname) 602 { 603 int i; 604 605 for (i = 0; i < MAXCONTROLLERS; i++) { 606 if (strncmp(devname, devlist[i]->name, strlen(devname)) == 0) { 607 break; 608 } 609 } 610 611 /* If device cannot be found, returns -1 */ 612 if (i == MAXCONTROLLERS) { 613 debug ("%s: device %s not found in devlist\n", __FUNCTION__, devname); 614 i = -1; 615 } 616 617 return i; 618 } 619 620 /* 621 * Read a MII PHY register. 622 * 623 * Returns: 624 * 0 on success 625 */ 626 static int uec_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg) 627 { 628 unsigned short value = 0; 629 int devindex = 0; 630 631 if (bus->name == NULL) { 632 debug("%s: NULL pointer given\n", __FUNCTION__); 633 } else { 634 devindex = uec_miiphy_find_dev_by_name(bus->name); 635 if (devindex >= 0) { 636 value = uec_read_phy_reg(devlist[devindex], addr, reg); 637 } 638 } 639 return value; 640 } 641 642 /* 643 * Write a MII PHY register. 644 * 645 * Returns: 646 * 0 on success 647 */ 648 static int uec_miiphy_write(struct mii_dev *bus, int addr, int devad, int reg, 649 u16 value) 650 { 651 int devindex = 0; 652 653 if (bus->name == NULL) { 654 debug("%s: NULL pointer given\n", __FUNCTION__); 655 } else { 656 devindex = uec_miiphy_find_dev_by_name(bus->name); 657 if (devindex >= 0) { 658 uec_write_phy_reg(devlist[devindex], addr, reg, value); 659 } 660 } 661 return 0; 662 } 663 #endif 664 665 static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr) 666 { 667 uec_t *uec_regs; 668 u32 mac_addr1; 669 u32 mac_addr2; 670 671 if (!uec) { 672 printf("%s: uec not initial\n", __FUNCTION__); 673 return -EINVAL; 674 } 675 676 uec_regs = uec->uec_regs; 677 678 /* if a station address of 0x12345678ABCD, perform a write to 679 MACSTNADDR1 of 0xCDAB7856, 680 MACSTNADDR2 of 0x34120000 */ 681 682 mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \ 683 (mac_addr[3] << 8) | (mac_addr[2]); 684 out_be32(&uec_regs->macstnaddr1, mac_addr1); 685 686 mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000; 687 out_be32(&uec_regs->macstnaddr2, mac_addr2); 688 689 return 0; 690 } 691 692 static int uec_convert_threads_num(uec_num_of_threads_e threads_num, 693 int *threads_num_ret) 694 { 695 int num_threads_numerica; 696 697 switch (threads_num) { 698 case UEC_NUM_OF_THREADS_1: 699 num_threads_numerica = 1; 700 break; 701 case UEC_NUM_OF_THREADS_2: 702 num_threads_numerica = 2; 703 break; 704 case UEC_NUM_OF_THREADS_4: 705 num_threads_numerica = 4; 706 break; 707 case UEC_NUM_OF_THREADS_6: 708 num_threads_numerica = 6; 709 break; 710 case UEC_NUM_OF_THREADS_8: 711 num_threads_numerica = 8; 712 break; 713 default: 714 printf("%s: Bad number of threads value.", 715 __FUNCTION__); 716 return -EINVAL; 717 } 718 719 *threads_num_ret = num_threads_numerica; 720 721 return 0; 722 } 723 724 static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx) 725 { 726 uec_info_t *uec_info; 727 u32 end_bd; 728 u8 bmrx = 0; 729 int i; 730 731 uec_info = uec->uec_info; 732 733 /* Alloc global Tx parameter RAM page */ 734 uec->tx_glbl_pram_offset = qe_muram_alloc( 735 sizeof(uec_tx_global_pram_t), 736 UEC_TX_GLOBAL_PRAM_ALIGNMENT); 737 uec->p_tx_glbl_pram = (uec_tx_global_pram_t *) 738 qe_muram_addr(uec->tx_glbl_pram_offset); 739 740 /* Zero the global Tx prameter RAM */ 741 memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t)); 742 743 /* Init global Tx parameter RAM */ 744 745 /* TEMODER, RMON statistics disable, one Tx queue */ 746 out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE); 747 748 /* SQPTR */ 749 uec->send_q_mem_reg_offset = qe_muram_alloc( 750 sizeof(uec_send_queue_qd_t), 751 UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT); 752 uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *) 753 qe_muram_addr(uec->send_q_mem_reg_offset); 754 out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset); 755 756 /* Setup the table with TxBDs ring */ 757 end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1) 758 * SIZEOFBD; 759 out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base, 760 (u32)(uec->p_tx_bd_ring)); 761 out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address, 762 end_bd); 763 764 /* Scheduler Base Pointer, we have only one Tx queue, no need it */ 765 out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0); 766 767 /* TxRMON Base Pointer, TxRMON disable, we don't need it */ 768 out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0); 769 770 /* TSTATE, global snooping, big endian, the CSB bus selected */ 771 bmrx = BMR_INIT_VALUE; 772 out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT)); 773 774 /* IPH_Offset */ 775 for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) { 776 out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0); 777 } 778 779 /* VTAG table */ 780 for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) { 781 out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0); 782 } 783 784 /* TQPTR */ 785 uec->thread_dat_tx_offset = qe_muram_alloc( 786 num_threads_tx * sizeof(uec_thread_data_tx_t) + 787 32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT); 788 789 uec->p_thread_data_tx = (uec_thread_data_tx_t *) 790 qe_muram_addr(uec->thread_dat_tx_offset); 791 out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset); 792 } 793 794 static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx) 795 { 796 u8 bmrx = 0; 797 int i; 798 uec_82xx_address_filtering_pram_t *p_af_pram; 799 800 /* Allocate global Rx parameter RAM page */ 801 uec->rx_glbl_pram_offset = qe_muram_alloc( 802 sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT); 803 uec->p_rx_glbl_pram = (uec_rx_global_pram_t *) 804 qe_muram_addr(uec->rx_glbl_pram_offset); 805 806 /* Zero Global Rx parameter RAM */ 807 memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t)); 808 809 /* Init global Rx parameter RAM */ 810 /* REMODER, Extended feature mode disable, VLAN disable, 811 LossLess flow control disable, Receive firmware statisic disable, 812 Extended address parsing mode disable, One Rx queues, 813 Dynamic maximum/minimum frame length disable, IP checksum check 814 disable, IP address alignment disable 815 */ 816 out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE); 817 818 /* RQPTR */ 819 uec->thread_dat_rx_offset = qe_muram_alloc( 820 num_threads_rx * sizeof(uec_thread_data_rx_t), 821 UEC_THREAD_DATA_ALIGNMENT); 822 uec->p_thread_data_rx = (uec_thread_data_rx_t *) 823 qe_muram_addr(uec->thread_dat_rx_offset); 824 out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset); 825 826 /* Type_or_Len */ 827 out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072); 828 829 /* RxRMON base pointer, we don't need it */ 830 out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0); 831 832 /* IntCoalescingPTR, we don't need it, no interrupt */ 833 out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0); 834 835 /* RSTATE, global snooping, big endian, the CSB bus selected */ 836 bmrx = BMR_INIT_VALUE; 837 out_8(&uec->p_rx_glbl_pram->rstate, bmrx); 838 839 /* MRBLR */ 840 out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN); 841 842 /* RBDQPTR */ 843 uec->rx_bd_qs_tbl_offset = qe_muram_alloc( 844 sizeof(uec_rx_bd_queues_entry_t) + \ 845 sizeof(uec_rx_prefetched_bds_t), 846 UEC_RX_BD_QUEUES_ALIGNMENT); 847 uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *) 848 qe_muram_addr(uec->rx_bd_qs_tbl_offset); 849 850 /* Zero it */ 851 memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \ 852 sizeof(uec_rx_prefetched_bds_t)); 853 out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset); 854 out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr, 855 (u32)uec->p_rx_bd_ring); 856 857 /* MFLR */ 858 out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN); 859 /* MINFLR */ 860 out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN); 861 /* MAXD1 */ 862 out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN); 863 /* MAXD2 */ 864 out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN); 865 /* ECAM_PTR */ 866 out_be32(&uec->p_rx_glbl_pram->ecamptr, 0); 867 /* L2QT */ 868 out_be32(&uec->p_rx_glbl_pram->l2qt, 0); 869 /* L3QT */ 870 for (i = 0; i < 8; i++) { 871 out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0); 872 } 873 874 /* VLAN_TYPE */ 875 out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100); 876 /* TCI */ 877 out_be16(&uec->p_rx_glbl_pram->vlantci, 0); 878 879 /* Clear PQ2 style address filtering hash table */ 880 p_af_pram = (uec_82xx_address_filtering_pram_t *) \ 881 uec->p_rx_glbl_pram->addressfiltering; 882 883 p_af_pram->iaddr_h = 0; 884 p_af_pram->iaddr_l = 0; 885 p_af_pram->gaddr_h = 0; 886 p_af_pram->gaddr_l = 0; 887 } 888 889 static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec, 890 int thread_tx, int thread_rx) 891 { 892 uec_init_cmd_pram_t *p_init_enet_param; 893 u32 init_enet_param_offset; 894 uec_info_t *uec_info; 895 int i; 896 int snum; 897 u32 init_enet_offset; 898 u32 entry_val; 899 u32 command; 900 u32 cecr_subblock; 901 902 uec_info = uec->uec_info; 903 904 /* Allocate init enet command parameter */ 905 uec->init_enet_param_offset = qe_muram_alloc( 906 sizeof(uec_init_cmd_pram_t), 4); 907 init_enet_param_offset = uec->init_enet_param_offset; 908 uec->p_init_enet_param = (uec_init_cmd_pram_t *) 909 qe_muram_addr(uec->init_enet_param_offset); 910 911 /* Zero init enet command struct */ 912 memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t)); 913 914 /* Init the command struct */ 915 p_init_enet_param = uec->p_init_enet_param; 916 p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0; 917 p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1; 918 p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2; 919 p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3; 920 p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4; 921 p_init_enet_param->largestexternallookupkeysize = 0; 922 923 p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx) 924 << ENET_INIT_PARAM_RGF_SHIFT; 925 p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx) 926 << ENET_INIT_PARAM_TGF_SHIFT; 927 928 /* Init Rx global parameter pointer */ 929 p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset | 930 (u32)uec_info->risc_rx; 931 932 /* Init Rx threads */ 933 for (i = 0; i < (thread_rx + 1); i++) { 934 if ((snum = qe_get_snum()) < 0) { 935 printf("%s can not get snum\n", __FUNCTION__); 936 return -ENOMEM; 937 } 938 939 if (i==0) { 940 init_enet_offset = 0; 941 } else { 942 init_enet_offset = qe_muram_alloc( 943 sizeof(uec_thread_rx_pram_t), 944 UEC_THREAD_RX_PRAM_ALIGNMENT); 945 } 946 947 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | 948 init_enet_offset | (u32)uec_info->risc_rx; 949 p_init_enet_param->rxthread[i] = entry_val; 950 } 951 952 /* Init Tx global parameter pointer */ 953 p_init_enet_param->txglobal = uec->tx_glbl_pram_offset | 954 (u32)uec_info->risc_tx; 955 956 /* Init Tx threads */ 957 for (i = 0; i < thread_tx; i++) { 958 if ((snum = qe_get_snum()) < 0) { 959 printf("%s can not get snum\n", __FUNCTION__); 960 return -ENOMEM; 961 } 962 963 init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t), 964 UEC_THREAD_TX_PRAM_ALIGNMENT); 965 966 entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) | 967 init_enet_offset | (u32)uec_info->risc_tx; 968 p_init_enet_param->txthread[i] = entry_val; 969 } 970 971 __asm__ __volatile__("sync"); 972 973 /* Issue QE command */ 974 command = QE_INIT_TX_RX; 975 cecr_subblock = ucc_fast_get_qe_cr_subblock( 976 uec->uec_info->uf_info.ucc_num); 977 qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET, 978 init_enet_param_offset); 979 980 return 0; 981 } 982 983 static int uec_startup(uec_private_t *uec) 984 { 985 uec_info_t *uec_info; 986 ucc_fast_info_t *uf_info; 987 ucc_fast_private_t *uccf; 988 ucc_fast_t *uf_regs; 989 uec_t *uec_regs; 990 int num_threads_tx; 991 int num_threads_rx; 992 u32 utbipar; 993 u32 length; 994 u32 align; 995 qe_bd_t *bd; 996 u8 *buf; 997 int i; 998 999 if (!uec || !uec->uec_info) { 1000 printf("%s: uec or uec_info not initial\n", __FUNCTION__); 1001 return -EINVAL; 1002 } 1003 1004 uec_info = uec->uec_info; 1005 uf_info = &(uec_info->uf_info); 1006 1007 /* Check if Rx BD ring len is illegal */ 1008 if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \ 1009 (uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) { 1010 printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n", 1011 __FUNCTION__); 1012 return -EINVAL; 1013 } 1014 1015 /* Check if Tx BD ring len is illegal */ 1016 if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) { 1017 printf("%s: Tx BD ring length must not be smaller than 2.\n", 1018 __FUNCTION__); 1019 return -EINVAL; 1020 } 1021 1022 /* Check if MRBLR is illegal */ 1023 if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) { 1024 printf("%s: max rx buffer length must be mutliple of 128.\n", 1025 __FUNCTION__); 1026 return -EINVAL; 1027 } 1028 1029 /* Both Rx and Tx are stopped */ 1030 uec->grace_stopped_rx = 1; 1031 uec->grace_stopped_tx = 1; 1032 1033 /* Init UCC fast */ 1034 if (ucc_fast_init(uf_info, &uccf)) { 1035 printf("%s: failed to init ucc fast\n", __FUNCTION__); 1036 return -ENOMEM; 1037 } 1038 1039 /* Save uccf */ 1040 uec->uccf = uccf; 1041 1042 /* Convert the Tx threads number */ 1043 if (uec_convert_threads_num(uec_info->num_threads_tx, 1044 &num_threads_tx)) { 1045 return -EINVAL; 1046 } 1047 1048 /* Convert the Rx threads number */ 1049 if (uec_convert_threads_num(uec_info->num_threads_rx, 1050 &num_threads_rx)) { 1051 return -EINVAL; 1052 } 1053 1054 uf_regs = uccf->uf_regs; 1055 1056 /* UEC register is following UCC fast registers */ 1057 uec_regs = (uec_t *)(&uf_regs->ucc_eth); 1058 1059 /* Save the UEC register pointer to UEC private struct */ 1060 uec->uec_regs = uec_regs; 1061 1062 /* Init UPSMR, enable hardware statistics (UCC) */ 1063 out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE); 1064 1065 /* Init MACCFG1, flow control disable, disable Tx and Rx */ 1066 out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE); 1067 1068 /* Init MACCFG2, length check, MAC PAD and CRC enable */ 1069 out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE); 1070 1071 /* Setup MAC interface mode */ 1072 uec_set_mac_if_mode(uec, uec_info->enet_interface_type, uec_info->speed); 1073 1074 /* Setup MII management base */ 1075 #ifndef CONFIG_eTSEC_MDIO_BUS 1076 uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg); 1077 #else 1078 uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS; 1079 #endif 1080 1081 /* Setup MII master clock source */ 1082 qe_set_mii_clk_src(uec_info->uf_info.ucc_num); 1083 1084 /* Setup UTBIPAR */ 1085 utbipar = in_be32(&uec_regs->utbipar); 1086 utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK; 1087 1088 /* Initialize UTBIPAR address to CONFIG_UTBIPAR_INIT_TBIPA for ALL UEC. 1089 * This frees up the remaining SMI addresses for use. 1090 */ 1091 utbipar |= CONFIG_UTBIPAR_INIT_TBIPA << UTBIPAR_PHY_ADDRESS_SHIFT; 1092 out_be32(&uec_regs->utbipar, utbipar); 1093 1094 /* Configure the TBI for SGMII operation */ 1095 if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) && 1096 (uec->uec_info->speed == SPEED_1000)) { 1097 uec_write_phy_reg(uec->dev, uec_regs->utbipar, 1098 ENET_TBI_MII_ANA, TBIANA_SETTINGS); 1099 1100 uec_write_phy_reg(uec->dev, uec_regs->utbipar, 1101 ENET_TBI_MII_TBICON, TBICON_CLK_SELECT); 1102 1103 uec_write_phy_reg(uec->dev, uec_regs->utbipar, 1104 ENET_TBI_MII_CR, TBICR_SETTINGS); 1105 } 1106 1107 /* Allocate Tx BDs */ 1108 length = ((uec_info->tx_bd_ring_len * SIZEOFBD) / 1109 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) * 1110 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; 1111 if ((uec_info->tx_bd_ring_len * SIZEOFBD) % 1112 UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) { 1113 length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT; 1114 } 1115 1116 align = UEC_TX_BD_RING_ALIGNMENT; 1117 uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align)); 1118 if (uec->tx_bd_ring_offset != 0) { 1119 uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align) 1120 & ~(align - 1)); 1121 } 1122 1123 /* Zero all of Tx BDs */ 1124 memset((void *)(uec->tx_bd_ring_offset), 0, length + align); 1125 1126 /* Allocate Rx BDs */ 1127 length = uec_info->rx_bd_ring_len * SIZEOFBD; 1128 align = UEC_RX_BD_RING_ALIGNMENT; 1129 uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align))); 1130 if (uec->rx_bd_ring_offset != 0) { 1131 uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align) 1132 & ~(align - 1)); 1133 } 1134 1135 /* Zero all of Rx BDs */ 1136 memset((void *)(uec->rx_bd_ring_offset), 0, length + align); 1137 1138 /* Allocate Rx buffer */ 1139 length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN; 1140 align = UEC_RX_DATA_BUF_ALIGNMENT; 1141 uec->rx_buf_offset = (u32)malloc(length + align); 1142 if (uec->rx_buf_offset != 0) { 1143 uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align) 1144 & ~(align - 1)); 1145 } 1146 1147 /* Zero all of the Rx buffer */ 1148 memset((void *)(uec->rx_buf_offset), 0, length + align); 1149 1150 /* Init TxBD ring */ 1151 bd = (qe_bd_t *)uec->p_tx_bd_ring; 1152 uec->txBd = bd; 1153 1154 for (i = 0; i < uec_info->tx_bd_ring_len; i++) { 1155 BD_DATA_CLEAR(bd); 1156 BD_STATUS_SET(bd, 0); 1157 BD_LENGTH_SET(bd, 0); 1158 bd ++; 1159 } 1160 BD_STATUS_SET((--bd), TxBD_WRAP); 1161 1162 /* Init RxBD ring */ 1163 bd = (qe_bd_t *)uec->p_rx_bd_ring; 1164 uec->rxBd = bd; 1165 buf = uec->p_rx_buf; 1166 for (i = 0; i < uec_info->rx_bd_ring_len; i++) { 1167 BD_DATA_SET(bd, buf); 1168 BD_LENGTH_SET(bd, 0); 1169 BD_STATUS_SET(bd, RxBD_EMPTY); 1170 buf += MAX_RXBUF_LEN; 1171 bd ++; 1172 } 1173 BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY); 1174 1175 /* Init global Tx parameter RAM */ 1176 uec_init_tx_parameter(uec, num_threads_tx); 1177 1178 /* Init global Rx parameter RAM */ 1179 uec_init_rx_parameter(uec, num_threads_rx); 1180 1181 /* Init ethernet Tx and Rx parameter command */ 1182 if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx, 1183 num_threads_rx)) { 1184 printf("%s issue init enet cmd failed\n", __FUNCTION__); 1185 return -ENOMEM; 1186 } 1187 1188 return 0; 1189 } 1190 1191 static int uec_init(struct eth_device* dev, bd_t *bd) 1192 { 1193 uec_private_t *uec; 1194 int err, i; 1195 struct phy_info *curphy; 1196 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) 1197 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); 1198 #endif 1199 1200 uec = (uec_private_t *)dev->priv; 1201 1202 if (uec->the_first_run == 0) { 1203 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) 1204 /* QE9 and QE12 need to be set for enabling QE MII managment signals */ 1205 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE9); 1206 setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); 1207 #endif 1208 1209 err = init_phy(dev); 1210 if (err) { 1211 printf("%s: Cannot initialize PHY, aborting.\n", 1212 dev->name); 1213 return err; 1214 } 1215 1216 curphy = uec->mii_info->phyinfo; 1217 1218 if (curphy->config_aneg) { 1219 err = curphy->config_aneg(uec->mii_info); 1220 if (err) { 1221 printf("%s: Can't negotiate PHY\n", dev->name); 1222 return err; 1223 } 1224 } 1225 1226 /* Give PHYs up to 5 sec to report a link */ 1227 i = 50; 1228 do { 1229 err = curphy->read_status(uec->mii_info); 1230 if (!(((i-- > 0) && !uec->mii_info->link) || err)) 1231 break; 1232 udelay(100000); 1233 } while (1); 1234 1235 #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) 1236 /* QE12 needs to be released for enabling LBCTL signal*/ 1237 clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_QE12); 1238 #endif 1239 1240 if (err || i <= 0) 1241 printf("warning: %s: timeout on PHY link\n", dev->name); 1242 1243 adjust_link(dev); 1244 uec->the_first_run = 1; 1245 } 1246 1247 /* Set up the MAC address */ 1248 if (dev->enetaddr[0] & 0x01) { 1249 printf("%s: MacAddress is multcast address\n", 1250 __FUNCTION__); 1251 return -1; 1252 } 1253 uec_set_mac_address(uec, dev->enetaddr); 1254 1255 1256 err = uec_open(uec, COMM_DIR_RX_AND_TX); 1257 if (err) { 1258 printf("%s: cannot enable UEC device\n", dev->name); 1259 return -1; 1260 } 1261 1262 phy_change(dev); 1263 1264 return (uec->mii_info->link ? 0 : -1); 1265 } 1266 1267 static void uec_halt(struct eth_device* dev) 1268 { 1269 uec_private_t *uec = (uec_private_t *)dev->priv; 1270 uec_stop(uec, COMM_DIR_RX_AND_TX); 1271 } 1272 1273 static int uec_send(struct eth_device *dev, void *buf, int len) 1274 { 1275 uec_private_t *uec; 1276 ucc_fast_private_t *uccf; 1277 volatile qe_bd_t *bd; 1278 u16 status; 1279 int i; 1280 int result = 0; 1281 1282 uec = (uec_private_t *)dev->priv; 1283 uccf = uec->uccf; 1284 bd = uec->txBd; 1285 1286 /* Find an empty TxBD */ 1287 for (i = 0; bd->status & TxBD_READY; i++) { 1288 if (i > 0x100000) { 1289 printf("%s: tx buffer not ready\n", dev->name); 1290 return result; 1291 } 1292 } 1293 1294 /* Init TxBD */ 1295 BD_DATA_SET(bd, buf); 1296 BD_LENGTH_SET(bd, len); 1297 status = bd->status; 1298 status &= BD_WRAP; 1299 status |= (TxBD_READY | TxBD_LAST); 1300 BD_STATUS_SET(bd, status); 1301 1302 /* Tell UCC to transmit the buffer */ 1303 ucc_fast_transmit_on_demand(uccf); 1304 1305 /* Wait for buffer to be transmitted */ 1306 for (i = 0; bd->status & TxBD_READY; i++) { 1307 if (i > 0x100000) { 1308 printf("%s: tx error\n", dev->name); 1309 return result; 1310 } 1311 } 1312 1313 /* Ok, the buffer be transimitted */ 1314 BD_ADVANCE(bd, status, uec->p_tx_bd_ring); 1315 uec->txBd = bd; 1316 result = 1; 1317 1318 return result; 1319 } 1320 1321 static int uec_recv(struct eth_device* dev) 1322 { 1323 uec_private_t *uec = dev->priv; 1324 volatile qe_bd_t *bd; 1325 u16 status; 1326 u16 len; 1327 u8 *data; 1328 1329 bd = uec->rxBd; 1330 status = bd->status; 1331 1332 while (!(status & RxBD_EMPTY)) { 1333 if (!(status & RxBD_ERROR)) { 1334 data = BD_DATA(bd); 1335 len = BD_LENGTH(bd); 1336 net_process_received_packet(data, len); 1337 } else { 1338 printf("%s: Rx error\n", dev->name); 1339 } 1340 status &= BD_CLEAN; 1341 BD_LENGTH_SET(bd, 0); 1342 BD_STATUS_SET(bd, status | RxBD_EMPTY); 1343 BD_ADVANCE(bd, status, uec->p_rx_bd_ring); 1344 status = bd->status; 1345 } 1346 uec->rxBd = bd; 1347 1348 return 1; 1349 } 1350 1351 int uec_initialize(bd_t *bis, uec_info_t *uec_info) 1352 { 1353 struct eth_device *dev; 1354 int i; 1355 uec_private_t *uec; 1356 int err; 1357 1358 dev = (struct eth_device *)malloc(sizeof(struct eth_device)); 1359 if (!dev) 1360 return 0; 1361 memset(dev, 0, sizeof(struct eth_device)); 1362 1363 /* Allocate the UEC private struct */ 1364 uec = (uec_private_t *)malloc(sizeof(uec_private_t)); 1365 if (!uec) { 1366 return -ENOMEM; 1367 } 1368 memset(uec, 0, sizeof(uec_private_t)); 1369 1370 /* Adjust uec_info */ 1371 #if (MAX_QE_RISC == 4) 1372 uec_info->risc_tx = QE_RISC_ALLOCATION_FOUR_RISCS; 1373 uec_info->risc_rx = QE_RISC_ALLOCATION_FOUR_RISCS; 1374 #endif 1375 1376 devlist[uec_info->uf_info.ucc_num] = dev; 1377 1378 uec->uec_info = uec_info; 1379 uec->dev = dev; 1380 1381 sprintf(dev->name, "UEC%d", uec_info->uf_info.ucc_num); 1382 dev->iobase = 0; 1383 dev->priv = (void *)uec; 1384 dev->init = uec_init; 1385 dev->halt = uec_halt; 1386 dev->send = uec_send; 1387 dev->recv = uec_recv; 1388 1389 /* Clear the ethnet address */ 1390 for (i = 0; i < 6; i++) 1391 dev->enetaddr[i] = 0; 1392 1393 eth_register(dev); 1394 1395 err = uec_startup(uec); 1396 if (err) { 1397 printf("%s: Cannot configure net device, aborting.",dev->name); 1398 return err; 1399 } 1400 1401 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) 1402 int retval; 1403 struct mii_dev *mdiodev = mdio_alloc(); 1404 if (!mdiodev) 1405 return -ENOMEM; 1406 strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); 1407 mdiodev->read = uec_miiphy_read; 1408 mdiodev->write = uec_miiphy_write; 1409 1410 retval = mdio_register(mdiodev); 1411 if (retval < 0) 1412 return retval; 1413 #endif 1414 1415 return 1; 1416 } 1417 1418 int uec_eth_init(bd_t *bis, uec_info_t *uecs, int num) 1419 { 1420 int i; 1421 1422 for (i = 0; i < num; i++) 1423 uec_initialize(bis, &uecs[i]); 1424 1425 return 0; 1426 } 1427 1428 int uec_standard_init(bd_t *bis) 1429 { 1430 return uec_eth_init(bis, uec_info, ARRAY_SIZE(uec_info)); 1431 } 1432