1 /* 2 * Copyright (C) 2006 Freescale Semiconductor, Inc. 3 * 4 * Dave Liu <daveliu@freescale.com> 5 * based on source code of Shlomi Gridish 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #include "common.h" 11 #include "malloc.h" 12 #include "asm/errno.h" 13 #include "asm/io.h" 14 #include "linux/immap_qe.h" 15 #include "uccf.h" 16 #include <fsl_qe.h> 17 18 void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf) 19 { 20 out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); 21 } 22 23 u32 ucc_fast_get_qe_cr_subblock(int ucc_num) 24 { 25 switch (ucc_num) { 26 case 0: return QE_CR_SUBBLOCK_UCCFAST1; 27 case 1: return QE_CR_SUBBLOCK_UCCFAST2; 28 case 2: return QE_CR_SUBBLOCK_UCCFAST3; 29 case 3: return QE_CR_SUBBLOCK_UCCFAST4; 30 case 4: return QE_CR_SUBBLOCK_UCCFAST5; 31 case 5: return QE_CR_SUBBLOCK_UCCFAST6; 32 case 6: return QE_CR_SUBBLOCK_UCCFAST7; 33 case 7: return QE_CR_SUBBLOCK_UCCFAST8; 34 default: return QE_CR_SUBBLOCK_INVALID; 35 } 36 } 37 38 static void ucc_get_cmxucr_reg(int ucc_num, volatile u32 **p_cmxucr, 39 u8 *reg_num, u8 *shift) 40 { 41 switch (ucc_num) { 42 case 0: /* UCC1 */ 43 *p_cmxucr = &(qe_immr->qmx.cmxucr1); 44 *reg_num = 1; 45 *shift = 16; 46 break; 47 case 2: /* UCC3 */ 48 *p_cmxucr = &(qe_immr->qmx.cmxucr1); 49 *reg_num = 1; 50 *shift = 0; 51 break; 52 case 4: /* UCC5 */ 53 *p_cmxucr = &(qe_immr->qmx.cmxucr2); 54 *reg_num = 2; 55 *shift = 16; 56 break; 57 case 6: /* UCC7 */ 58 *p_cmxucr = &(qe_immr->qmx.cmxucr2); 59 *reg_num = 2; 60 *shift = 0; 61 break; 62 case 1: /* UCC2 */ 63 *p_cmxucr = &(qe_immr->qmx.cmxucr3); 64 *reg_num = 3; 65 *shift = 16; 66 break; 67 case 3: /* UCC4 */ 68 *p_cmxucr = &(qe_immr->qmx.cmxucr3); 69 *reg_num = 3; 70 *shift = 0; 71 break; 72 case 5: /* UCC6 */ 73 *p_cmxucr = &(qe_immr->qmx.cmxucr4); 74 *reg_num = 4; 75 *shift = 16; 76 break; 77 case 7: /* UCC8 */ 78 *p_cmxucr = &(qe_immr->qmx.cmxucr4); 79 *reg_num = 4; 80 *shift = 0; 81 break; 82 default: 83 break; 84 } 85 } 86 87 static int ucc_set_clk_src(int ucc_num, qe_clock_e clock, comm_dir_e mode) 88 { 89 volatile u32 *p_cmxucr = NULL; 90 u8 reg_num = 0; 91 u8 shift = 0; 92 u32 clockBits; 93 u32 clockMask; 94 int source = -1; 95 96 /* check if the UCC number is in range. */ 97 if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) 98 return -EINVAL; 99 100 if (! ((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) { 101 printf("%s: bad comm mode type passed\n", __FUNCTION__); 102 return -EINVAL; 103 } 104 105 ucc_get_cmxucr_reg(ucc_num, &p_cmxucr, ®_num, &shift); 106 107 switch (reg_num) { 108 case 1: 109 switch (clock) { 110 case QE_BRG1: source = 1; break; 111 case QE_BRG2: source = 2; break; 112 case QE_BRG7: source = 3; break; 113 case QE_BRG8: source = 4; break; 114 case QE_CLK9: source = 5; break; 115 case QE_CLK10: source = 6; break; 116 case QE_CLK11: source = 7; break; 117 case QE_CLK12: source = 8; break; 118 case QE_CLK15: source = 9; break; 119 case QE_CLK16: source = 10; break; 120 default: source = -1; break; 121 } 122 break; 123 case 2: 124 switch (clock) { 125 case QE_BRG5: source = 1; break; 126 case QE_BRG6: source = 2; break; 127 case QE_BRG7: source = 3; break; 128 case QE_BRG8: source = 4; break; 129 case QE_CLK13: source = 5; break; 130 case QE_CLK14: source = 6; break; 131 case QE_CLK19: source = 7; break; 132 case QE_CLK20: source = 8; break; 133 case QE_CLK15: source = 9; break; 134 case QE_CLK16: source = 10; break; 135 default: source = -1; break; 136 } 137 break; 138 case 3: 139 switch (clock) { 140 case QE_BRG9: source = 1; break; 141 case QE_BRG10: source = 2; break; 142 case QE_BRG15: source = 3; break; 143 case QE_BRG16: source = 4; break; 144 case QE_CLK3: source = 5; break; 145 case QE_CLK4: source = 6; break; 146 case QE_CLK17: source = 7; break; 147 case QE_CLK18: source = 8; break; 148 case QE_CLK7: source = 9; break; 149 case QE_CLK8: source = 10; break; 150 case QE_CLK16: source = 11; break; 151 default: source = -1; break; 152 } 153 break; 154 case 4: 155 switch (clock) { 156 case QE_BRG13: source = 1; break; 157 case QE_BRG14: source = 2; break; 158 case QE_BRG15: source = 3; break; 159 case QE_BRG16: source = 4; break; 160 case QE_CLK5: source = 5; break; 161 case QE_CLK6: source = 6; break; 162 case QE_CLK21: source = 7; break; 163 case QE_CLK22: source = 8; break; 164 case QE_CLK7: source = 9; break; 165 case QE_CLK8: source = 10; break; 166 case QE_CLK16: source = 11; break; 167 default: source = -1; break; 168 } 169 break; 170 default: 171 source = -1; 172 break; 173 } 174 175 if (source == -1) { 176 printf("%s: Bad combination of clock and UCC\n", __FUNCTION__); 177 return -ENOENT; 178 } 179 180 clockBits = (u32) source; 181 clockMask = QE_CMXUCR_TX_CLK_SRC_MASK; 182 if (mode == COMM_DIR_RX) { 183 clockBits <<= 4; /* Rx field is 4 bits to left of Tx field */ 184 clockMask <<= 4; /* Rx field is 4 bits to left of Tx field */ 185 } 186 clockBits <<= shift; 187 clockMask <<= shift; 188 189 out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clockMask) | clockBits); 190 191 return 0; 192 } 193 194 static uint ucc_get_reg_baseaddr(int ucc_num) 195 { 196 uint base = 0; 197 198 /* check if the UCC number is in range */ 199 if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0)) { 200 printf("%s: the UCC num not in ranges\n", __FUNCTION__); 201 return 0; 202 } 203 204 switch (ucc_num) { 205 case 0: base = 0x00002000; break; 206 case 1: base = 0x00003000; break; 207 case 2: base = 0x00002200; break; 208 case 3: base = 0x00003200; break; 209 case 4: base = 0x00002400; break; 210 case 5: base = 0x00003400; break; 211 case 6: base = 0x00002600; break; 212 case 7: base = 0x00003600; break; 213 default: break; 214 } 215 216 base = (uint)qe_immr + base; 217 return base; 218 } 219 220 void ucc_fast_enable(ucc_fast_private_t *uccf, comm_dir_e mode) 221 { 222 ucc_fast_t *uf_regs; 223 u32 gumr; 224 225 uf_regs = uccf->uf_regs; 226 227 /* Enable reception and/or transmission on this UCC. */ 228 gumr = in_be32(&uf_regs->gumr); 229 if (mode & COMM_DIR_TX) { 230 gumr |= UCC_FAST_GUMR_ENT; 231 uccf->enabled_tx = 1; 232 } 233 if (mode & COMM_DIR_RX) { 234 gumr |= UCC_FAST_GUMR_ENR; 235 uccf->enabled_rx = 1; 236 } 237 out_be32(&uf_regs->gumr, gumr); 238 } 239 240 void ucc_fast_disable(ucc_fast_private_t *uccf, comm_dir_e mode) 241 { 242 ucc_fast_t *uf_regs; 243 u32 gumr; 244 245 uf_regs = uccf->uf_regs; 246 247 /* Disable reception and/or transmission on this UCC. */ 248 gumr = in_be32(&uf_regs->gumr); 249 if (mode & COMM_DIR_TX) { 250 gumr &= ~UCC_FAST_GUMR_ENT; 251 uccf->enabled_tx = 0; 252 } 253 if (mode & COMM_DIR_RX) { 254 gumr &= ~UCC_FAST_GUMR_ENR; 255 uccf->enabled_rx = 0; 256 } 257 out_be32(&uf_regs->gumr, gumr); 258 } 259 260 int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t **uccf_ret) 261 { 262 ucc_fast_private_t *uccf; 263 ucc_fast_t *uf_regs; 264 265 if (!uf_info) 266 return -EINVAL; 267 268 if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { 269 printf("%s: Illagal UCC number!\n", __FUNCTION__); 270 return -EINVAL; 271 } 272 273 uccf = (ucc_fast_private_t *)malloc(sizeof(ucc_fast_private_t)); 274 if (!uccf) { 275 printf("%s: No memory for UCC fast data structure!\n", 276 __FUNCTION__); 277 return -ENOMEM; 278 } 279 memset(uccf, 0, sizeof(ucc_fast_private_t)); 280 281 /* Save fast UCC structure */ 282 uccf->uf_info = uf_info; 283 uccf->uf_regs = (ucc_fast_t *)ucc_get_reg_baseaddr(uf_info->ucc_num); 284 285 if (uccf->uf_regs == NULL) { 286 printf("%s: No memory map for UCC fast controller!\n", 287 __FUNCTION__); 288 return -ENOMEM; 289 } 290 291 uccf->enabled_tx = 0; 292 uccf->enabled_rx = 0; 293 294 uf_regs = uccf->uf_regs; 295 uccf->p_ucce = (u32 *) &(uf_regs->ucce); 296 uccf->p_uccm = (u32 *) &(uf_regs->uccm); 297 298 /* Init GUEMR register, UCC both Rx and Tx is Fast protocol */ 299 out_8(&uf_regs->guemr, UCC_GUEMR_SET_RESERVED3 | UCC_GUEMR_MODE_FAST_RX 300 | UCC_GUEMR_MODE_FAST_TX); 301 302 /* Set GUMR, disable UCC both Rx and Tx, Ethernet protocol */ 303 out_be32(&uf_regs->gumr, UCC_FAST_GUMR_ETH); 304 305 /* Set the Giga ethernet VFIFO stuff */ 306 if (uf_info->eth_type == GIGA_ETH) { 307 /* Allocate memory for Tx Virtual Fifo */ 308 uccf->ucc_fast_tx_virtual_fifo_base_offset = 309 qe_muram_alloc(UCC_GETH_UTFS_GIGA_INIT, 310 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); 311 312 /* Allocate memory for Rx Virtual Fifo */ 313 uccf->ucc_fast_rx_virtual_fifo_base_offset = 314 qe_muram_alloc(UCC_GETH_URFS_GIGA_INIT + 315 UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, 316 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); 317 318 /* utfb, urfb are offsets from MURAM base */ 319 out_be32(&uf_regs->utfb, 320 uccf->ucc_fast_tx_virtual_fifo_base_offset); 321 out_be32(&uf_regs->urfb, 322 uccf->ucc_fast_rx_virtual_fifo_base_offset); 323 324 /* Set Virtual Fifo registers */ 325 out_be16(&uf_regs->urfs, UCC_GETH_URFS_GIGA_INIT); 326 out_be16(&uf_regs->urfet, UCC_GETH_URFET_GIGA_INIT); 327 out_be16(&uf_regs->urfset, UCC_GETH_URFSET_GIGA_INIT); 328 out_be16(&uf_regs->utfs, UCC_GETH_UTFS_GIGA_INIT); 329 out_be16(&uf_regs->utfet, UCC_GETH_UTFET_GIGA_INIT); 330 out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_GIGA_INIT); 331 } 332 333 /* Set the Fast ethernet VFIFO stuff */ 334 if (uf_info->eth_type == FAST_ETH) { 335 /* Allocate memory for Tx Virtual Fifo */ 336 uccf->ucc_fast_tx_virtual_fifo_base_offset = 337 qe_muram_alloc(UCC_GETH_UTFS_INIT, 338 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); 339 340 /* Allocate memory for Rx Virtual Fifo */ 341 uccf->ucc_fast_rx_virtual_fifo_base_offset = 342 qe_muram_alloc(UCC_GETH_URFS_INIT + 343 UCC_FAST_RX_VIRTUAL_FIFO_SIZE_PAD, 344 UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); 345 346 /* utfb, urfb are offsets from MURAM base */ 347 out_be32(&uf_regs->utfb, 348 uccf->ucc_fast_tx_virtual_fifo_base_offset); 349 out_be32(&uf_regs->urfb, 350 uccf->ucc_fast_rx_virtual_fifo_base_offset); 351 352 /* Set Virtual Fifo registers */ 353 out_be16(&uf_regs->urfs, UCC_GETH_URFS_INIT); 354 out_be16(&uf_regs->urfet, UCC_GETH_URFET_INIT); 355 out_be16(&uf_regs->urfset, UCC_GETH_URFSET_INIT); 356 out_be16(&uf_regs->utfs, UCC_GETH_UTFS_INIT); 357 out_be16(&uf_regs->utfet, UCC_GETH_UTFET_INIT); 358 out_be16(&uf_regs->utftt, UCC_GETH_UTFTT_INIT); 359 } 360 361 /* Rx clock routing */ 362 if (uf_info->rx_clock != QE_CLK_NONE) { 363 if (ucc_set_clk_src(uf_info->ucc_num, 364 uf_info->rx_clock, COMM_DIR_RX)) { 365 printf("%s: Illegal value for parameter 'RxClock'.\n", 366 __FUNCTION__); 367 return -EINVAL; 368 } 369 } 370 371 /* Tx clock routing */ 372 if (uf_info->tx_clock != QE_CLK_NONE) { 373 if (ucc_set_clk_src(uf_info->ucc_num, 374 uf_info->tx_clock, COMM_DIR_TX)) { 375 printf("%s: Illegal value for parameter 'TxClock'.\n", 376 __FUNCTION__); 377 return -EINVAL; 378 } 379 } 380 381 /* Clear interrupt mask register to disable all of interrupts */ 382 out_be32(&uf_regs->uccm, 0x0); 383 384 /* Writing '1' to clear all of envents */ 385 out_be32(&uf_regs->ucce, 0xffffffff); 386 387 *uccf_ret = uccf; 388 return 0; 389 } 390