1 /* 2 * Copyright (c) 2009 Wind River Systems, Inc. 3 * Tom Rix <Tom.Rix at windriver.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 * 7 * twl4030_power_reset_init is derived from code on omapzoom, 8 * git://git.omapzoom.com/repo/u-boot.git 9 * 10 * Copyright (C) 2007-2009 Texas Instruments, Inc. 11 * 12 * twl4030_power_init is from cpu/omap3/common.c, power_init_r 13 * 14 * (C) Copyright 2004-2008 15 * Texas Instruments, <www.ti.com> 16 * 17 * Author : 18 * Sunil Kumar <sunilsaini05 at gmail.com> 19 * Shashi Ranjan <shashiranjanmca05 at gmail.com> 20 * 21 * Derived from Beagle Board and 3430 SDP code by 22 * Richard Woodruff <r-woodruff2 at ti.com> 23 * Syed Mohammed Khasim <khasim at ti.com> 24 */ 25 26 #include <twl4030.h> 27 28 /* 29 * Power Reset 30 */ 31 void twl4030_power_reset_init(void) 32 { 33 u8 val = 0; 34 if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 35 TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) { 36 printf("Error:TWL4030: failed to read the power register\n"); 37 printf("Could not initialize hardware reset\n"); 38 } else { 39 val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON; 40 if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 41 TWL4030_PM_MASTER_P1_SW_EVENTS, val)) { 42 printf("Error:TWL4030: failed to write the power register\n"); 43 printf("Could not initialize hardware reset\n"); 44 } 45 } 46 } 47 48 /* 49 * Power off 50 */ 51 void twl4030_power_off(void) 52 { 53 u8 data; 54 55 /* PM master unlock (CFG and TST keys) */ 56 57 data = 0xCE; 58 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 59 TWL4030_PM_MASTER_PROTECT_KEY, data); 60 data = 0xEC; 61 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 62 TWL4030_PM_MASTER_PROTECT_KEY, data); 63 64 /* VBAT start disable */ 65 66 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 67 TWL4030_PM_MASTER_CFG_P1_TRANSITION, &data); 68 data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT; 69 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 70 TWL4030_PM_MASTER_CFG_P1_TRANSITION, data); 71 72 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 73 TWL4030_PM_MASTER_CFG_P2_TRANSITION, &data); 74 data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT; 75 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 76 TWL4030_PM_MASTER_CFG_P2_TRANSITION, data); 77 78 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 79 TWL4030_PM_MASTER_CFG_P3_TRANSITION, &data); 80 data &= ~TWL4030_PM_MASTER_CFG_TRANSITION_STARTON_VBAT; 81 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 82 TWL4030_PM_MASTER_CFG_P3_TRANSITION, data); 83 84 /* High jitter for PWRANA2 */ 85 86 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 87 TWL4030_PM_MASTER_CFG_PWRANA2, &data); 88 data &= ~(TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT0_LOWV | 89 TWL4030_PM_MASTER_CFG_PWRANA2_LOJIT1_LOWV); 90 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 91 TWL4030_PM_MASTER_CFG_PWRANA2, data); 92 93 /* PM master lock */ 94 95 data = 0xFF; 96 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 97 TWL4030_PM_MASTER_PROTECT_KEY, data); 98 99 /* Power off */ 100 101 twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, 102 TWL4030_PM_MASTER_P1_SW_EVENTS, &data); 103 data |= TWL4030_PM_MASTER_SW_EVENTS_DEVOFF; 104 twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 105 TWL4030_PM_MASTER_P1_SW_EVENTS, data); 106 } 107 108 /* 109 * Set Device Group and Voltage 110 */ 111 void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, 112 u8 dev_grp, u8 dev_grp_sel) 113 { 114 int ret; 115 116 /* Select the Voltage */ 117 ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg, 118 vsel_val); 119 if (ret != 0) { 120 printf("Could not write vsel to reg %02x (%d)\n", 121 vsel_reg, ret); 122 return; 123 } 124 125 /* Select the Device Group (enable the supply if dev_grp_sel != 0) */ 126 ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp, 127 dev_grp_sel); 128 if (ret != 0) 129 printf("Could not write grp_sel to reg %02x (%d)\n", 130 dev_grp, ret); 131 } 132 133 void twl4030_power_init(void) 134 { 135 /* set VAUX3 to 2.8V */ 136 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED, 137 TWL4030_PM_RECEIVER_VAUX3_VSEL_28, 138 TWL4030_PM_RECEIVER_VAUX3_DEV_GRP, 139 TWL4030_PM_RECEIVER_DEV_GRP_P1); 140 141 /* set VPLL2 to 1.8V */ 142 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED, 143 TWL4030_PM_RECEIVER_VPLL2_VSEL_18, 144 TWL4030_PM_RECEIVER_VPLL2_DEV_GRP, 145 TWL4030_PM_RECEIVER_DEV_GRP_ALL); 146 147 /* set VDAC to 1.8V */ 148 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED, 149 TWL4030_PM_RECEIVER_VDAC_VSEL_18, 150 TWL4030_PM_RECEIVER_VDAC_DEV_GRP, 151 TWL4030_PM_RECEIVER_DEV_GRP_P1); 152 } 153 154 void twl4030_power_mmc_init(int dev_index) 155 { 156 if (dev_index == 0) { 157 /* Set VMMC1 to 3.15 Volts */ 158 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED, 159 TWL4030_PM_RECEIVER_VMMC1_VSEL_32, 160 TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, 161 TWL4030_PM_RECEIVER_DEV_GRP_P1); 162 163 mdelay(100); /* ramp-up delay from Linux code */ 164 } else if (dev_index == 1) { 165 /* Set VMMC2 to 3.15 Volts */ 166 twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, 167 TWL4030_PM_RECEIVER_VMMC2_VSEL_32, 168 TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, 169 TWL4030_PM_RECEIVER_DEV_GRP_P1); 170 171 mdelay(100); /* ramp-up delay from Linux code */ 172 } 173 } 174 175 #ifdef CONFIG_CMD_POWEROFF 176 int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) 177 { 178 twl4030_power_off(); 179 180 return 0; 181 } 182 #endif 183